Analysis of Density of Sintered Iron Powder Component Using the Response Surface Method
Prasanta Kumar Bardhan, Suprs Patra, Goutam Sutradhar
.
DOI: 10.4236/msa.2010.13024   PDF    HTML     7,328 Downloads   13,760 Views   Citations

Abstract

The continued growth of ferrous powder metallurgy in automobile and others engineering application is largely de-pendent on the development of higher density materials and improved mechanical properties. Since density is a predominant factor in the performance of powder metallurgy components, it has been primarily considered for the present investigation. An experimental investigation have been undertaken in order to understand the variation of density with respect to the variation of process parameters viz., compaction load, sinter temperature and sintering time. The relation among the various process parameters with density has been observed. A mathematical model has been developed using second order response surface model (RSM) with central composite design (CCD) considering the above mentioned process parameters. The developed mathematical model would help in predicting the variation in density with the change in the level of different parameters influencing the density variation. This model also can be useful for setting of optimum value of the parameters for achieving the target density.

Share and Cite:

P. Bardhan, S. Patra and G. Sutradhar, "Analysis of Density of Sintered Iron Powder Component Using the Response Surface Method," Materials Sciences and Applications, Vol. 1 No. 3, 2010, pp. 152-157. doi: 10.4236/msa.2010.13024.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] R. M. German, “Powder Metallurgy of Iron and Steel,” John Willy & Sons, New York, 1998.
[2] G. S. Upadhyaya, “Powder metallurgy Technology,” Cambridge International Science Publishing, Cambridge, 1997.
[3] K. S. Narasimhan, “Recent Advances in Ferrous Powder Metallurgy,” Advanced Performance Materials, Vol. 3, No. 1, 1996, pp. 7-27.
[4] H. Rutz, J. Khanuja and S. Kassam, “Single Compaction to Active High Density in Ferrous P/M Materials in Au-tomatic Applications,” PM2TEC’96 World Congress, Washington, D.C., 1996.
[5] H. G. Rutz and F. G.Hanejko, “The Application of Worm Compaction to High Density Powder, Metallurgy Parts”, PM2TEC’97 International Conference on Powder Me-tallurgy & Particulate Materials, Chicago, 1997.
[6] H. G. Rutz and F. G. Hanejko, “High Density Processing of High Performance Ferrous Materials. Advances in Powder Metallurgy and Particulate Materials,” Metal Powder In-dustries Federation, Princeton, Vol. 5, 1994, pp. 117.
[7] L. A. Dobrzanshi, J. Otereba, M. G. Actis and M. Rosso, “Microstructural Characteristics and Mechanical Properties of Ni-Mo-(W) Steels,” Journal of Achievements in Materials and Manufacturing Engineering, Vol. 18, 2006, pp. 347.
[8] K. S. Naransimhan, “Sintering of Powder Mixtures and the Growth of Ferrous Powder Metallurgy,” Materials Chemistry and Physics, Vol. 67, No. 1-3, 2001, pp. 56-65.
[9] W.-F. Wang, “Effect of Powder Type and Compaction Pressure on the Density, Hardness and Oxidation Resis-tance of Sintered and Steam Treated Steels,” Journal of Materials Engineering Performance, Vol. 16, No. 5, 2007, pp. 533-538.
[10] K.-Y. Kung, J.-T. Horng and K.-T. Chiang, “Material Removal Rate and Electrode Wear Ratio Study on the Powder Mixed Electrical Discharge Machining of Cobalt-Bonded Tungsten Carbide,” International Journal of Advanced Manufacturing Technology, Vol. 40, No. 1-2, 2009, pp. 95-104.
[11] A. K. Eksi and A. H. Yuzbasioglu, “Effect of Sintering and Pressing Parameters on the Densification of Cold Iso- Statically Pressed Al and Fe Powder,” Materials & Design, Vol. 28, No. 4, 2007, pp. 1364-1368.
[12] D. Chatterjee, B. Oraon, G. Sutradhar and P. K. Bose, “Prediction of Hardness for Sintered HSS Components Using Response Surface Method,” Journal of Materials Processing Technology, Vol. 190, No. 1-3, 2007, pp. 123- 129.
[13] G. E. P. Boxes and N. R. Draper, “Emperical Model Building and Response Surfaces,” Wiley, New York, 1987.
[14] D. C. Montgomery, “Design and Analysis of Experi-ments,” John Wiley & Sons, New York, 1991.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.