Study of Mechanical Behaviour of Coconut Shell Reinforced Polymer Matrix Composite


The morphology and mechanical properties of coconut shell reinforced polyethylene composite have been evaluated to establish the possibility of using it as a new material for engineering applications. Coconut shell reinforced composite was prepared by compacting low density polyethylene matrix with 5% - 25% volume fraction coconut shell particles and the effect of the particles on the mechanical properties of the composite produced was investigated. The result shows that the hardness of the composite increases with increase in coconut shell content though the tensile strength, modulus of elasticity, impact energy and ductility of the composite decreases with increase in the particle content. Scanning Electron Microscopy (SEM) of the composites (with 0% - 25% particles) surfaces indicates poor interfacial interaction between the coconut shell particle and the low density polyethylene matrix. This study therefore exploits the potential of agrobased waste fiber in Nigeria as an alternative particulate material for the development of a new composite.

Share and Cite:

A. Olumuyiwa, T. Isaac and S. Samuel, "Study of Mechanical Behaviour of Coconut Shell Reinforced Polymer Matrix Composite," Journal of Minerals and Materials Characterization and Engineering, Vol. 11 No. 8, 2012, pp. 774-779. doi: 10.4236/jmmce.2012.118065.

Conflicts of Interest

The authors declare no conflicts of interest.


[1] T. Prakash, “Processing and Characterization of Natural Fiber Reinforced Polymer Composites,” Bachelor’s Thesis, National Institute of Technology, Rourkela, 2009.
[2] S. N. Monteiro, L. A. H. Terrones and J. R. M. D’Almeida, “Mechanical Performance of Coir Fiber/Polyester Composites,” Polymer Testing, Vol. 27, No. 5, 2008, pp. 591- 595. doi:10.1016/j.polymertesting.2008.03.003
[3] W. Wang and G. Huang, “Characterization and Utilization of Natural Coconut Fibers Composites,” Materials & Design, Vol. 30, No. 7, 2009, pp. 2741-2744. doi:10.1016/j.matdes.2008.11.002
[4] M. Sapuan and M. Harimi, “Mechanical Properties of Epoxy/Coconut Shell Filler Particle Composites,” The Arabian Journal for Science and Engineering, Vol. 28, No. 2B, 2003, pp. 171-181.
[5] S. Husseinsyah and M. Mostapha, “The Effect of Filler Content on Properties of Coconut Shell Filled Polyester Composites,” Malasian Polymer Journal, Vol. 6, No. 1, 2011, pp. 87-97.
[6] S. Roopa and M. Siddaramaiah, “Mechanical, Thermal and Morphological Behaviours of Coconut Shell Powder Filled Pu/Ps Biocomposites,” Advanced Materials Research, Vol. 41, No. 14, 2010, pp. 3141-3153.
[7] Y. J. Jun, K. J. Tae, J. O. Hwa, R. Y. Jae and S. S. Young, “Thermal Stability and Flammability of Coconut Fiber Reinforced Poly(Lactic Acid) Composites,” Composites Part B: Engineering, Vol. 43, No. 5, 2011, pp. 2434-2438. doi:10.1016/j.compositesb.2011.11.003
[8] K. Andrzej and A. Abdullah, “Barley Husk and Coconut Shell Reinforced Polypropylene Composites: The Effect of Fiber Physical, Chemical and Surface Properties,” Composites Science and Technology, Vol. 70, No. 5, 2010, pp. 840-846.
[9] M. Brahmakumar, C. Pavithran and R. M. Pillai, “Coconut Fiber Reinforced Polyethylene Composites: Effect of Natural Waxy Surface Layer of The Fiber on Fiber/Matrix Interfacial Bonding and Strength of Composites,” Composites Science and Technology, Vol. 65, No. 3-4, 2005, pp. 563-569.
[10] J. Sarki, S. B. Hassan, V. S. Aigbodiona and J. E. Oghenevwetaa, “Potential of Using Coconut Shell Particle Fillers in Eco-Composite Materials,” Journal of Alloys and Compounds, Vol. 509, No. 5, 2011, pp. 2381- 2385. doi:10.1016/j.jallcom.2010.11.025

Copyright © 2023 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.