Mechanical Properties of Potassium Titanate Whisker Reinforced Epoxy Resin Composites

Abstract

This paper deals with the study of mechanical properties of Potassium Titanate Whisker (PTW) reinforced epoxy based Polymer Matrix Composites (PMCs). Epoxy composites filled with PTW in various content of 0-20 wt% were prepared using the casting technique. Data on neat epoxy is also included for comparison. All tests were conducted at room temperature and as per ASTM standards. It was observed that inclusion of PTW affected most of the mechanical properties of neat epoxy. Density, hardness and heat deflection temperature of neat epoxy were found to increase with the PTW content. However tensile and flexural properties of the developed composites exhibited a varying trend with respect to PTW content. Epoxy filled with 10 wt% PTW showed good improvement in tensile strength and flexural strength of neat epoxy. It was observed that PTW is not beneficial in improving the impact strength of neat epoxy. Composites with 20 wt% PTW exhibited least impact strength. This paper also highlights the possible reasons for variation in the mechanical properties of developed polymer composites.

Share and Cite:

M. Sudheer, K. Subbaya, D. Jawali and T. Bhat, "Mechanical Properties of Potassium Titanate Whisker Reinforced Epoxy Resin Composites," Journal of Minerals and Materials Characterization and Engineering, Vol. 11 No. 2, 2012, pp. 193-211. doi: 10.4236/jmmce.2012.112016.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] Charles A. Happer, Handbook of Plastics, Elastomers and Composites, 2004, 4th Edition, McGraw -Hill Publications.
[2] De S. K. and White, J. R., Short Fibre Polymer Composites, 1996, Woodhead Publishing Limited, Cambridge, UK.
[3] John V. Milewski and Harry S. Katz, 1987, Whiskers, In: Handbook of Reinforcements for Plastics, pp. 205-229, Van Nostrand Reinhold, New York.
[4] Youxi Lin, Chenghui Gao and Ning Li, 2006, “Influence of CaCO3 whisker content on mechanical and tribological properties of polyetheretherketone composites”, J.Mater. Sci. Technol. Vol.22, No.5, pp. 584-588.
[5] Y-X Lin, C.Gao and M.Chen, 2009, “Thermomechanical properties and tribological behavior of CaCO3whisker-reinforced polyetheretherketone composites”, Proc. Inst. Mech. Engnrs. Part D: J. Engg. Tribol. Vol 223, pp. 1013-1018.
[6] Y. Zhang, C.A.Pickles and J.Cameron, 1992, “The production and mechanical properties of silicon carbide and alumina whisker-reinforced epoxy composites”, J. Reinf. Plast. Compos. 11, pp. 1176–1186.
[7] M.Avella, E.Martuscelli, M.Raimo, R.Partch and S.G. Gangolli, 1997, ”Polypropylene reinforced with silicon carbide whiskers”, J. Mater. Sci 32, pp. 2411-2416.
[8] Shibo Wang, Shirong Ge and Dekun Zhang, 2009, “Comparison of tribological behavior of nylon composites filled with zinc oxide particles and whiskers”, Wear 266, pp. 248-254.
[9] B.Z.Jang, J.Y.Liau, L.R.Hwang and W.K.Shih, 1989, “Structure-property relationships in thermoplastic particulate- and ceramic whisker-modified epoxy resins”, J. Reinf. Plast. Compos. 8, pp. 312–333.
[10] K. Suganuma, T. Fujita, K. Nihara and N. Suzuki, 1989, “AA6061 composite reinforced with potassium titanate whisker”, J. Mater. Sci. Lett. Vol.8, No. 7, pp. 808–810.
[11] Feng Xin, Wang Huaiyuan, Shi Yijun, Chen Donghui and Lu Xiaohua, 2007, “The effects of the size and content of potassium titanate whiskers on the properties of PTW/PTFE composites”, Mater. Sci. Eng. A 448, pp. 253–258.
[12] L.F.Chen, Y.P.Hong, Y.Zhang and J.L.Qiu, 2000, “Fabrication of polymer matrix composites reinforced with controllably oriented whiskers”, J. Mater. Sci., 35, pp. 5309-5312.
[13] Shoubing Chen, Qihua Wang, Tingmei Wang and Xianqiang Pei, 2011, “Preparation, damping and thermal properties of potassium titanate whiskers filled castor oil based polyurethane/epoxy interpenetrating polymer network composites”, Mater. Des.32, pp. 803-807.
[14] Demei Yu, Jingshen Wu, Limin Zhou, Darong Xie and Songzheng Wu, 2000, “The dielectric and mechanical properties of a potassium-titanate-whisker-reinforced PP/PA blend”, Comp. Sci. and Tech. 60, pp. 499-508.
[15] S.C.Tjong and Y.Z.Meng, 1998, “Performance of potassium titanate whisker reinforced polyamide-6 composites”, Polymer Vol.39 No.22, pp. 5461-5466.
[16] S.C.Tjong and Y.Z.Meng, 1999, “Properties and morphology of polyamide 6 hybrid composites containing potassium titanate whisker and liquid crystalline copolyester”, Polymer 40, pp. 1109-1117.
[17] G.S. Zhuang, G.X. Sui, H. Meng, Z.S. Sun and R. Yang, 2007, “Mechanical properties of potassium titanate whiskers reinforced poly(ether ether ketone) composites using different compounding processes”, Comp. Sci. and Tech. 67, pp. 1172–1181.
[18] Zhencai Zhu, Lei Xu and Guoan Chen, 2011, “Effect of different whiskers on the physical and tribological properties of non-metallic friction materials”, Mater. Des.32, pp. 54-61.
[19] Mukesh Kumar, Bhabani K. Satapathy, AmarPatnaik, DilipK.Kolluri and Bharat S.Tomar, 2011, “Hybrid composite friction materials reinforced with combination of potassium titanate whiskers and aramid fibre: Assessment of fade and recovery performance”, Tribol. Int. 44 pp. 359–367.
[20] Mallick, P. K.,1993, Fiber Reinforced Composites: Materials, Manufacturing and Design, Vol. 18, 2nd edn, Marcel Dekkar, Inc., New York.
[21] Shao Yun Fu, Xi-Qiao Feng, Bernd Lauke and Yiu Wing Mai, 2008, “Effects of particle size, particle/matrix interface adhesion and particles loading on mechanical properties of particulate-polymer composites”, Composites: Part B 39, pp. 933-961.
[22] G.S. Zhuang, G.X. Sui, H. Meng, Z.S. Sun and R. Yang, 2007, “Mechanical properties of potassium titanate whiskers reinforced poly(ether ether ketone) composites using different compounding processes”, Comp. Sci. and Tech. 67, pp. 1172–1181.
[23] G. Y. Xie , G. X. Sui and R. Yang, 2010, “The Effect of Applied Load on Tribological Behaviors of Potassium Titanate Whiskers Reinforced PEEK Composites Under Water Lubricated Condition”, Tribol. Lett. 38, pp. 87–96.
[24] Demei Yu, Jingshen Wu, Limin Zhou, Darong Xie and Songzheng Wu, 2000, “The dielectric and mechanical properties of a potassium-titanate-whisker-reinforced PP/PA blend”, Comp. Sci. and Tech. 60, pp. 499-508.
[25] Klaus Friedrich, Stoyko Fakirov and Zhong Zhang, 2005, Polymer Composites: From Nano- to Macro-Scale, Springer, New York.
[26] Chun-Guang Long, Li-Ping He, Zhi-Hua Zhong and Shu-Guang Chen, 2007, “Studies on polypropylene composites reinforced by ramier fiber and K2Ti6O13 whisker”, Research Letters in Materials Science, Article ID 87072, pp.1-4.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.