Share This Article:

Characterization of In-Plane Mechanical Properties of Laminated Hybrid Composites

Abstract Full-Text HTML Download Download as PDF (Size:128KB) PP. 105-114
DOI: 10.4236/jmmce.2010.92009    7,498 Downloads   11,140 Views   Citations

ABSTRACT

An experimental investigation was conducted to study the effect of hybrid composite specimen subjected to in-plane tensile and compressive loading. The laminated specimens in accordance with ASTM standards were fabricated using steel and nylon bi-directional mesh as reinforcements and polyester as the binder. The various volume fractions and fiber orientations were used in which the percentage of polyester (40%) was maintained constant. From the investigations it is revealed that, the specimens with higher percentage of steel sustain greater loads & also the strengths are superior in case of 0/900 oriented specimens. A relationship between the tensile/compressive strength, fiber content and orientation has been established.

Cite this paper

K. Satish, B. Siddeswarappa and K. Kaleemulla, "Characterization of In-Plane Mechanical Properties of Laminated Hybrid Composites," Journal of Minerals and Materials Characterization and Engineering, Vol. 9 No. 2, 2010, pp. 105-114. doi: 10.4236/jmmce.2010.92009.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] S.M.R. Khalili, R.K. Mittal , S. Gharibi Kalibar , “A study of the mechanical properties of steel/aluminium/GRP laminates”, Journal of Materials Science and Engineering, A 412,pp.137–140, 2005.
[2] Ding YQ, Yan Y, McIlhagger R. Effect of impact and fatique loads on the strength of plain weave carbon-epoxy composites, Journal of Materials Processing Technology. 1995; 55:58-62.
[3] Gao SL, Kim JK. Cooling rate influences in carbon fiber/PEEK composites. Part III: impact damage performance. Composites: Part A. 2001;32:775-85.
[4] Yail J. Kim, Amir Fam, Andrew Kong, and Mark F. Green, “Flexural Strengthening of RC Beams using Steel Reinforced Polymer (SRP) Composites,” Synopsis, 2005.
[5] Kim J, Shioya M, Kobayashi H, Kaneko J, Kido M. Mechanical properties of woven laminates and felt composites using carbon fibers. Part 1: in-plane properties. Composites Science and Technology. 2004;64:2221-29.
[6] B.Gommers, I.Verpoest and P.Van Houtte, “Determination of the Mechanical Properties of Composite Materials by Tensile Tests,” J.of Composite Materials, Vol.32, pp. 102-122, 1998.
[7] Berg.J.S and D.F.Adams , “An Evaluation of Composite Material Compression Test Methods,” J. of Composites Technology, Vol.11, No.2, pp.41-46, 1989.
[8] Asit.N.R. , “Compression Testing of Homogeneous Materials and Composites,”ASTM STP 808, R.Chait and R.Papirno, eds., Philadelphia:American Society for Testing and Materials, pp. 175-186,1983.
[9] KimR.Y. And S.W.Tsai, “A Compressive Test Method for Ring Specimens,” Int. SAMPE Symp., pp34-53,1981.
[10] ASTM Standards, “ASTM D3039: Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials,” ASTM, West Conshohohoken, PA, 1995, pp. 99-109.
[11] Ran.Y. Kim and Allan S. Crasto, “A Longitudinal Compression Test for Composites Using a Sandwich Specimen,” J.of Composite Materials, Vol.26, pp 1915-1929, 1992.
[12] Yang B, Kozey V, Adanur S, Kumar S. Bending, compression, and shear behavior of woven glass fiber- epoxy composites. Composites: Part B. 2000; 31:715-21.
[13] ASTM D792 Standard Test Method for Compressive Properties of Unidirectional or Crossply Fiber-Resin Composites. American Society for Testing and Materials; 1987.
[14] Fukuda H, Kawata K. Fukugo Zairyo Kenkyu (Comp Mat Struct) 1974;3:21.
[15] Krishna K Chawla, Composite Material
[16] ASTM D2734 Standard Test Method for Compressive Properties of Unidirectional or Cross-ply Fiber-Resin Composites. American Society for Testing and Materials; 1987.
[17] John E. Masters and Marc A. Portanova, Standard Test Methods for Textile Composites, National Aeronautics and Space Administration, Langley Research Center Hampton, Virginia 1996.
[18] Nayfeh AH. Fiber Sci Technol 1977;10: 196-209.
[19] Van den Heuvel PVD, Peijs T, Young RJ. In: The Sixth Int. Conf. on Comp. Interf.,Israel, May 1996.
[20] G. Prodromou and J. Chen. 1997. “On the Relationship Between Shear Angle and Wrinkling of Textile Composite Preforms,” Composites Part A, 28: 491-503.
[21] Wagner HD, Eitan A. Composite Sci Technol 1993;46:353-6.
[22] Hedgepeth JM. NASA TN D-882, 1961.
[23] Hedgepeth JM, Van Dyke P. Journal of Composite Materials 1967;1:294.
[24] ASTM D3410 Standard Test Method for Compressive Properties of Unidirectional or Cross-ply Fiber-Resin Composites. American Society for Testing and Materials; p.132-139. 1987.
[25] ASTM D3518 Standard Test Method for Compressive Properties of Unidirectional or Cross-ply Fiber-Resin Composites. American Society for Testing and Materials; 1987.
[26] Morais JL, Moura MS, Xavier J, Marques AT. In-plane mechanical behaviour of a glass/epoxy composite. National Conference at Universidade do Porto. 20 Encontro da Sociedade Portuguesa de Reologia, SPR, FEUP. 2000: 243-252.
[27] Konrad Gliesche, Tamara Hubner, Holger Orawetz. Investigations of in-plane shear properties of ±450 carbon/epoxy composites using tensile testing and optical deformation analysis. Composites Sciense and Technology. 2005;65:163-171.

  
comments powered by Disqus

Copyright © 2020 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.