Evaluation for the Beneficiability of Yellow Silica Sands from the Overburden of Lignite Mine situated in Rajpardi district of Gujarat, India

Abstract

A representative feed sample of Yellow sand was wet-sieved in order to recover the desired fractions for glass making. The mass percentage of (–600 +300) μm and (–300 +125)μm fraction was found to be 44.2 and 55.8% (ratio 1:2.26).Hence, this ratio which satisfies the size specifications for glass making sand, was maintained for all the down stream processing studies. The chemical analysis of the ‘wet sieved desired fractions for Yellow sand’ (WSDFy) i.e., mixture of –600 +300μm and –300 +125μm fractions, showed that the material does not satisfy IS specifications since it still contains 0.41% iron. WSDFy analysed 95.8% silica, 0.41% Fe2O3, 0.25% TiO2 and 0.3% Al2O3. In order to further value add WSDFy, the same was subjected to attrition followed by magnetic separation. Tests at optimum conditions gave a non-magnetic fraction (sand product) which analysed 98.5% silica with 0.08% Fe2O3, 0.05% TiO2 and 0.2% LOI. This is found matching with IS specifications for Grade III sand only.

Share and Cite:

M. Sundararajan, S. Ramaswamy and P. Raghavan, "Evaluation for the Beneficiability of Yellow Silica Sands from the Overburden of Lignite Mine situated in Rajpardi district of Gujarat, India," Journal of Minerals and Materials Characterization and Engineering, Vol. 8 No. 7, 2009, pp. 569-581. doi: 10.4236/jmmce.2009.87050.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] Indian Bureau of Mines, Nagpur, , 1993, Quartz and Silica Sand; Bulletin No. 25
[2] Directorate of Mining and Geology, Kerala; 1998. “Report on silica sand”
[3] Bureau of Indian Standards, 1977. IS specification for standard silica sand for raw material testing in foundries, IS:3018-1977, Indian Standard Institution, New Delhi
[4] Bureau of Indian Standards, 1980. IS specification for glass making sands, IS:488-1980, Indian Standard Institution, New Delhi
[5] Ay, N., Arica, E, 2000. “Refining Istanbul’s silica sand”, www.Ceramicbulletin.org, August 06.
[6] Farmer, A.D., Collings, A.F., Jameson, G.J., 2000. The application of power ultrasound to the surface cleaning of silica and heavy mineral sands, Ultrasonics Sonochemistry, 7, pp. 243-247
[7] Axiarchaou, M., Panias, D., Douni, I., Paspaliaris, I., Kontopoulos, A., 1997. Removal of iron from silica sand by leaching with oxalic acid, Hydrometallurgy, 46, pp.215-227
[8] Wills, B. A. 1998. Mineral processing Technology. Pergamon Press, New York

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.