H-bridge Hybrid Converter Modeling and Synthesize with Power Sharing Analysis

Aryan Sotoudeh, Abdolreza Rahmati

School of electrical Engineering, Iust, Tehran, Iran.

DOI: 10.4236/epe.2012.44025                

Abstract

In this paper hybrid converters with double inputs are investigated. Mainly any possible topologies are constructed and only one of them is chosen and modeled in none ideal format, by state space averaging method. After that small signal model and equilibrium point of that model is calculated. Finally with power sharing analysis the best point in efficiency was calculated.

Keywords

Hybrid Converter; None Ideal Modeling; Small Signal; Equilibrium Point; Power Sharing

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1]	Y. Levron and D. Shmilovitz, “Optimal Power Management in Fueled Systems with Finite Storage Capacity,” IEEE Transactions on Circuits and Systems—I: Regular Papers, Vol. 57, No. 8, 2010, pp. 2221-2231. doi:10.1109/TCSI.2009.2037405
[2]	N. D. Benavides and P. L. Chapman, “Power Budgeting of a Multiple-Input Buck-Boost Converter,” IEEE Transactions on Power Electronics, Vol. 20, No. 6, 2005, pp. 1303-1309. doi:10.1109/TPEL.2005.857531
[3]	K. Gummi and M. Ferdowsi, “Synthesis of Double-Input Dc-Dc Converters Using a Single-Pole Triple-Throw Switch as a Building Block,” Proceedings of PESC’08, Rhodes, 15-19 June 2008, pp. 2819-2823.
[4]	H. Li, Z. Du, K. Wang, L. M. Tolbert and D. Liu, “A Hybrid Energy System Using Cascaded H-Bridge Converter,” Proceedings of Industry Applications Conference’07, Kosice, Vol. 1, 7-8 October 2006, pp. 198-203.
[5]	Y. Li, D. Yang and X. Ruan, “A Systematic Method for Generating Multiple-Input Dc/Dc Converters,” Proceedings of VPPC’08, Harbin, 3-5 September 2008, pp. 1-6.
[6]	Y. Li, X. Ruan, D. Yang, F. Liu and T. C. K., “Synthesis of Multiple-Input Dc/Dc Converters,” IEEE Transactions on Power Electronics, Vol. 25, No. 9, 2010, pp. 2372- 2385. doi:10.1109/TPEL.2010.2047273
[7]	K. Kobayashi, H. Matsuo and Y. Sekine, “Novel Solar-Cell Power Supply System Using a Multiple-Input Dc-Dc Converter,” IEEE Transactions on Industrial Electronics, Vol. 53, No. 1, 2006, pp. 281-286. doi:10.1109/TIE.2005.862250
[8]	Y. M. Chen, Y. C. Liu, F. Y. Wu and Y. E. Wu, “Multi-Input Converter with Power Factor Correction and Maximum Power Point Tracking Features,” Proceedings of APEC’02, Vol. 1, 2002, pp. 490-496.
[9]	K. P. Yalamanchili and M. Ferdowsi, “Review of Multiple Input Dc-Dc Converters for Electric and Hybrid Vehicles,” Proceedings of VPPC’05, Chicago, 7-9 September 2005, pp. 160-163.
[10]	A. Davoudi and J. Jatskevich, “Realization of Parasitic in State-Space Average-Value Modeling of pwm Dc-Dc Converters,” IEEE Transactions on Power Electronics, Vol. 21, No. 4, 2006, pp. 1142-1147. doi:10.1109/TPEL.2006.879048
[11]	S. C. Wong, C. K. Tse, M. Orabi and T. Ninomiya, “The Method of Double Averaging: An Approach for Modeling Power Factor—Correction Switching Converters,” IEEE Transactions on Circuits and Systems—I: Regular Papers, Vol. 53, No. 2, 2006, pp. 454-462.
[12]	B. Bryant and M. K. Kazimierczuk, “Open-Loop Power-Stage Transfer Functions Relevant to Current- Mode Control of Boost pwm Converter Operating in ccm,” IEEE Transactions on Circuits and Systems—I: Regular Papers, Vol. 52, No. 10, 2005, pp. 2158-2164. doi:10.1109/TCSI.2005.852919