|
[1]
|
A. S. Manmode, D. M. Sakarkar and N. M. Mahajan, “Nanoparticles-Tremendous Therapeutic Potential: A Revier,” International Journal of PharmTech Research, Vol. 1, No. 4, 2009, pp. 1020-1027.
|
|
[2]
|
P. Ayak, S. K. Sahoo, A. Behera, P. K. Nanda, P. L. Nayak and B. C. Guru, “Synthesis and Characterization of Soy Protin Isolate/MMT Nanocomposite Film for the Control Release of the Drug Ofloxacin,” World Journal of Nano Science and Engineering, Vol. 1, No. 2, 2011, pp. 27-36. doi:10.4236/wjnse.2011.12005
|
|
[3]
|
L. E. Nielsen and R. F. Landel, “Mechanical Properties of Polymers and Composites,” 2nd Edition, Marcel Deckker, New York, 1994.
|
|
[4]
|
S. Nikkeshi, M. Kudo and T. Masuko, “Dynamic Viscoelastic Properties and Thermal Properties of Powder-Epoxy Resin Composites,” Journal of Applied Polymer Science, Vol. 69, No. 13, 1998, pp. 2593-2598.
doi:10.1002/(SICI)1097-4628(19980926)69:13<2593::AID-APP9>3.0.CO;2-5
|
|
[5]
|
K. Zhu and S. Schmauder, “Prediction of the Failure Properties of Short Fiber Reinforced Composites with Metal and Polymer Matrix,” Computational Materials Science, Vol. 28, No. 3-4, 2003, pp. 743-748.
doi:10.1016/j.commatsci.2003.08.028
|
|
[6]
|
I. H. Tavman, “Thermal and Mechanical Properties of Copper Powder Filled Polyethylene Composites,” Powder Technology, Vol. 91, No. 1, 1997, pp. 63-67.
doi:10.1016/S0032-5910(96)03247-0
|
|
[7]
|
T. Ahmad and O. Mamat, “The Development and Characterization of Zirconia-Silica Sand Nanoparticles Composites,” World Journal of Nano Science and Engineering, Vol. 1, No. 1, 2011, pp. 7-14.
doi:10.4236/wjnse.2011.11002
|
|
[8]
|
K. Jung-il, P. H. Kang and Y. C. Nho, “Positive Temperature Coefficient Behavior of Polymer Composites Having a High Melting Temperature,” Journal of Applied Polymer Science, Vol. 92, No. 1, 2004, pp. 394-401.
doi:10.1002/app.20064
|
|
[9]
|
S. T. Peters, “Handbook of Composites,” 2nd Edition, Chapman and Hall, London, 1998.
|
|
[10]
|
R. N. Rothon, “Mineral Fillers in Thermoplastics I: Raw Materials and Processing,” Springer, Berlin, 1999.
|
|
[11]
|
M. Sumita, T. Shizuma, K. Miyasaka and K. Ishikawa, “Effect of Reducible Properties of Temperature, Rate of Strain, and Filler Content on the Tensile Yield Stress of Nylon 6 Composites Filled with Ultrafine Particlesm,” Journal of Macromolecular Science: Physics, Vol. B22, No. 4, 1983, pp. 601-618.
|
|
[12]
|
Q.-H. Wang, J. Xue, W. Shen and W. Liu, “An Investigation of the Friction and Wear Properties of Nanometer Si3N4 Filled PEEK,” Wear, Vol. 196, No. 1-2, 1996, pp. 82-86. doi:10.1016/0043-1648(95)06866-X
|
|
[13]
|
Q.-H. Wang, Q. Xue, H. Liu, W. Shen and J. Xue, “The Effect of Particle Size of Nanometer ZrO2 on the Tribological Behaviour of PEEK,” Wear, Vol. 198, No. 1-2, 1996, pp. 216-219. doi:10.1016/0043-1648(96)07201-8
|
|
[14]
|
M. C. Kuo, C. M. Tsai, J. C. Huang and M. Chen, “PEEK Composites Reinforced by Nano-Sized SiO2 and Al2O3 Particulates Materials,” Chemistry and Physics, Vol. 90, No. 1, 2005, pp. 185-195.
|
|
[15]
|
T. E. Attwood, P. C. Dawson, J. L. Freeman, L. R. J. Hoy, J. B. Rose and P. A. Staniland, “Synthesis & Properties of Polyaryletherketones,” Polymer, Vol. 22, No. 8, 1981, pp. 1096-1103. doi:10.1016/0032-3861(81)90299-8
|
|
[16]
|
P. K. Goyal, Y. S. Negi and A. N. Tiwari, “Preparation of High Performance Composites Based on Aluminum Nitride/Poly(Ether-Ether-Ketone) and Their Properties,” European Polymer Journal, Vol. 41, No. 9, 2005, pp. 2034-2044. doi:10.1016/j.eurpolymj.2005.04.009
|
|
[17]
|
P. Cassagnau, “Payne Effect and Shear Elasticity of Silica-Filled Polymers in Concentrated Solutions and in Molten State,” Polymer, Vol. 44, No. 8, 2003, pp. 2455-2462. doi:10.1016/S0032-3861(03)00094-6
|
|
[18]
|
M. C. Kuo, J. C. Huang and M. Chena “Non-Isothermal Crystallization Kinetic Behavior of Alumina Nanoparticle Filled Poly(Etheretherketone),” Materials Chemistry and Physics, Vol. 99, No. 2-3, 2006, pp. 258-268.
doi:10.1016/j.matchemphys.2005.10.021
|
|
[19]
|
Q. H. Wang, Q. J. Xue, W. M. Liu and J. M. Chen, “The Friction and Wear Characteristics of Nanometer SiC and Polytetrafluoroethylene Filled Polyetheretherketone,” Wear, Vol. 243, No. 1-2, 2000, pp. 140-146.
doi:10.1016/S0043-1648(00)00432-4
|
|
[20]
|
C. J. Schwartz and S. Bahdur, “Studies on the Tribological Behavior and Transfer Film-Counterface Bond Strength for Polyphenylene Sulfide Filled with Nanoscale Alumina Particles,” Wear, Vol. 237, No. 2, 2000, pp. 261-273.
doi:10.1016/S0043-1648(99)00345-2
|
|
[21]
|
E. Reynaud, C. Gauthier and J. Perez, “Nanophases in Polymers,” Revue De Metallurgie, Vol. 98, 1999, pp. 169-176.
|
|
[22]
|
Q. H. Wang, Q. J. Xue and W. C. Shen, “The Friction and Wear Properties of Nanometre SiO2 Filled Polyetheretherketone,” Tribology International, Vol. 30, No. 3, 1997, 193-197. doi:10.1016/S0301-679X(96)00042-4
|
|
[23]
|
M. Q. Zhang, M. Z. Rong, S. L. Yu, B. Wetzel and K. Friedrich, “Improvement of Tribological Performance of Epoxy by the Addition of Irradiation Crafted Nano-Ino ganic Particles,” Macromolecular Materials and Engineering, Vol. 287, No. 2, 2002, 111-115.
doi:10.1002/1439-2054(20020201)287:2<111::AID-MAME111>3.0.CO;2-I
|
|
[24]
|
F. Li, K. Hu and J. Li, “The Friction and Wear Characteristics of Nanometer ZnO Filled Polytetrafluoroethylene,” Wear, Vol. 249, No. 10-11, 2002, pp. 877-882.
doi:10.1016/S0043-1648(01)00816-X
|
|
[25]
|
W. G. Sawyer, K. D. Freudenberg, P. Bhimaraj and L. S. Schadler, “A Study on the Friction and Wear Behavior of PTFE Filled with Alumina Nanoparticles,” Wear, Vol. 254, No. 5, 2003, pp. 573-580.
|
|
[26]
|
A. Hoshino, K. Fujioka, T. Oku, S. Nakamura, M. Suga, Y. Yamaguchi, K. Suzuki and M. Yasuhara, “Quantum dots Targeted to the Assigned Organelle in Living Cells,” Microbiology and Immunology, Vol. 48, No. 12, 2004, pp. 985-994.
|
|
[27]
|
I. Yamamoto, T. Higashihara and T. Kobayashi, “Effect of Silica-Particle Characteristics on Impact/Usual Fatigue Properties and Evaluation of Mechanical Characteristics of Silica-Particle Epoxy Resins,” JSME International Journal, Vol. 46, No. 2, 2003, pp. 145-153.
doi:10.1299/jsmea.46.145
|
|
[28]
|
W. J. Cantwell and A. C. Moloney, “Fractography and Failure Mechanisms of Polymers and Composites,” Elesvier, Ameserdam, 1994.
|
|
[29]
|
R. J. Young and P. W. R. Beaumont, “Failure of Brittle Polymers by Slow Crack Growth: Part 3 Effect of Composition upon the Fracture of Silica Particle-Filled Epoxy resin Composites,” Journal of Materials Science, Vol. 12, No. 4, 1997, pp. 684-692.
|
|
[30]
|
Q. Wang, Q. Xue, H. Liu, W. Shen and J. Xu, “The Effect of Particle Size of Nanometer ZrO2 on the Tribological Behaviour of PEEK,” Wear, Vol. 198, No. 1-2, 1996, pp. 216-219. doi:10.1016/0043-1648(96)07201-8
|
|
[31]
|
Q. Wang, J. Xue, W. Shen and W. Liu, “An Investigation of the Friction and Wear Properties of Nanometer Si 3N 4-Filled PEEK,” Wear, Vol. 196, No. 1-2, 1996, pp. 82-86.
doi:10.1016/0043-1648(95)06866-X
|
|
[32]
|
Q. Wang, Q. Xue, H. Liu, W. Shen and J. Xue, “The Effect of Particle Size of Nanometer ZrO2 on the Tribolological Behavior of PEEK,” Wear, Vol. 198, 1996, pp. 216-219. doi:10.1016/0043-1648(96)07201-8
|
|
[33]
|
Q. Wang, J. Xue, W. Shen, Q. Xue, “The Effect of Nanometer SiC Filler on the Tribological Behavior of PEEK,” Wear, Vol. 209, No. 1-2, 1997, pp. 316-321.
doi:10.1016/S0043-1648(97)00015-X
|
|
[34]
|
Q. Wang, Q. Xue and W. Shen, “The Friction and Wear Properties of Nanometre SiO2-Filled Polyetheretherketone, Tribology International, Vol. 30, No. 3, 1997, pp. 193-197. doi:10.1016/S0301-679X(96)00042-4
|
|
[35]
|
Q. Wang, Q. Xue, W. Liu and J. Chen, “The Friction and Wear Characteristics of Nanometer SiC and Polytetrafluoroethylene-Filled Polyetheretherketone,” Wear, Vol. 243, No. 1-2, 2000, pp. 140-146.
doi:10.1016/S0043-1648(00)00432-4
|
|
[36]
|
Q. Wang, Q. Xue, W. Liu and J. Chen, “Effect of Nanometer SiC Filler on the Tribological Behavior of PEEK under Distilled Water Lubrication,” Journal of Applied Polymer Science, Vol. 78, No. 3, 2000, pp. 609-614.
doi:10.1002/1097-4628(20001017)78:3<609::AID-APP160>3.0.CO;2-D
|
|
[37]
|
C. J. Schwartz and S. Bahadur, “Studies on the Tribological Behavior and Transfer Film-Counterface Bond Strength for Polyphenylene Sulfide Filled with Nanoscale Alumina Particles,” Wear, Vol. 237, No. 2, 2000, pp. 261-273. doi:10.1016/S0043-1648(99)00345-2
|
|
[38]
|
E. Petrovicova, R. Knight, L. S. Schadler and T. E. Twardowski, “Nylon 11/Silica Nanocomposite Coatings Applied by the HVOF Process, II. Mechanical and Barrier Properties,” Journal of Applied Polymer Science, Vol. 78, No. 13, 2000, pp. 2272-2289.
doi:10.1002/1097-4628(20001220)78:13<2272::AID-APP50>3.0.CO;2-U
|
|
[39]
|
M. Avella, M. E. Errica and E. Martuscelli, “Novel PMMA/CaCO3 Nanocomposites Abrasion Resistant Prepared by an in Situ Polymerization Process,” Nano Letters, Vol. 1, No. 4, 2001, pp. 213-217. doi:10.1021/nl015518v
|
|
[40]
|
L. Yu, S. Yang, H. Wang and Q. Xue, “An Investigation of the Friction and Wear Behaviors of Micrometer Copper Particle-Filled Polyoxymethylene Composites,” Journal of Applied Polymer Science, Vol. 77, No. 11, 2000, pp. 2404-2410.
doi:10.1002/1097-4628(20000912)77:11<2404::AID-APP8>3.0.CO;2-Q
|
|
[41]
|
W. Sawyer, K. Freudenberg, P. Bhimaraj and L. Schadler, “A Study on the Friction and Wear Behavior of PTFE Filled with Alumina Nanoparticles,” Wear, Vol. 254, No. 5-6, 2003, pp. 573-580.
doi:10.1016/S0043-1648(03)00252-7
|
|
[42]
|
D. Burris and W. G. Sawyer, “Tribological Sensitivity of PTFE-Alumina Nanocomposites to a Range of Traditional Surface Finishes,” Tribology Transactions, Vol. 48, No. 2, 2005, pp. 1-7. doi:10.1080/05698190590923842
|
|
[43]
|
M. Fuji, T. Takei, T. Watanabe and M. Chikazawa, “Effect of Wettability on Adhesion Force between Silica Particles Evaluated by Atomic Force Microscopy Measurement as a Function of Relative Humidity,” Langmuir, Vol. 15, No. 13, 1999, pp. 4584-4589. doi:10.1021/la981533c
|
|
[44]
|
S. C. Chung, W. G. Hahm, S. S. Im and S. G. Oh, “Poly (Ethylene Terephthalate)(PET) Nanocomposites Filled with Fumed Silicas by Melt Compounding,” Macromolecular Research, Vol. 10, No. 4, 2002, pp. 221-229.
doi:10.1007/BF03218309
|
|
[45]
|
J. W. Cho and D. R. Paul, “Nylon 6 Nanocomposites by Melt Compounding,” Polymer, Vol. 42, No. 3, 2001, pp. 1083-1094. doi:10.1016/S0032-3861(00)00380-3
|
|
[46]
|
C. M. Liauw, P. Dumitru, G. C. Lees, M. L. Clemens and R. N. Rothon, “Interfacial Modification of Polystyreneblockpolybutadiene-Block-Polystyrene/Magnesium Hydroxide Composites, 1 Effect on Rheological Properties,” Macromolecular Materials and Engineering, Vol. 288, No. 5, 2003, pp. 412-420. doi:10.1002/mame.200390035
|
|
[47]
|
C. M. Liauw, R. N. Rothon, G. C. Lees, P. Dumitru, Z. Iqbal, V. Khunova and P. Alexy, “Filler Surface Modification with Organic Acids and Derivatives,” Proceedings of Functional Effect Fillers, Berlin, 2000.
|
|
[48]
|
S. H. Ahn, S. H. Kim and S. G. Lee, “Synthesis and Characterization of Soluble Polypyrrole with Improved Electrical Conductivity,” Journal of Applied Polymer Science, Vol. 84, No. 14, 2002, pp. 2583-2590.
doi:10.1002/app.10281
|
|
[49]
|
S. H. Ahn, S. H. Kim and B. C. Kim, “Mechanical Properties of Silica Nanoparticle Reinforced Poly(Ethylene 2, 6-Naphthalate), Macromolecular Research, Vol. 12, No. 3, 2004, pp. 293-302. doi:10.1007/BF03218403
|
|
[50]
|
G. Decher, “Fuzzy Nanoassemblies: Toward Layered Polymeric Multicom-Posites, Science, Vol. 277, No. 5330, 1997, pp. 1232-1238. doi:10.1126/science.277.5330.1232
|
|
[51]
|
W. F. Bradley, “The Structural Scheme of Attapulgite,” American Mineralogist, Vol. 25, 1940, pp. 405-410.
|
|
[52]
|
Y. H. Lai, M. C. Kuo, J. C. Huang and M. Chen, “Thermomechanical Properties of Nanosilica Reinforced PEEK Composites,” Key Engineering Materials, Vol. 351, 2007, pp. 15-20. doi:10.4028/www.scientific.net/KEM.351.15
|
|
[53]
|
Y. B. Guo, D. G. Wang and S. W. Zhang, “Adhesion and friction of Nanoparticles/Polyelectrolyte Multilayer Films by AFM and Micro-Tribometer,” Tribology International, Vol. 44, No. 7-8, 2011, pp. 906-915.
doi:10.1016/j.triboint.2011.03.007
|
|
[54]
|
Q. B. Wang, M. L. Gao and S. W. Zhang, “Nanofriction Properties of Molecular Deposition Films,” Science in China (Series B), Vol. 43, No. 2, 2003, pp. 12-14.
|
|
[55]
|
P. Zhang, Q. Xue, Z. Du and Z. Zhang, “The Tribological Behavior of LB Films of Fatty Acids and Nanoparticles,” Wear, Vol. 242, No. 1-2, 2000, pp. 147-151.
doi:10.1016/S0043-1648(00)00405-1
|
|
[56]
|
P. Zhang, Q. Xue, Z. Du, et al., “The Tribological Behavior of Ordered System Ultrathin Films,” Wear, Vol. 254, No. 10, 2003, pp. 959-964.
doi:10.1016/S0043-1648(03)00300-4
|
|
[57]
|
G. T. Gu, Z. J. Zhang and H. X. Dang, “Preparation and Characterization of Hydrophobic Organic-Inorganic Composite Thin Films of PMMA/SiO2/TiO2 with Low Friction Coefficient,” Applied Surface Science, Vol. 221, No. 1-4, 2004, pp. 129-135.
doi:10.1016/S0169-4332(03)00865-1
|
|
[58]
|
G. B. Yang, H. X. Ma, Z. S. Wu and P. Y. Zhang, “Tribological Behavior of ZnS-Filled Polyelectrolyte Multilayers,” Wear, Vol. 262, No. 3-4, 2007, pp. 471-476.
doi:10.1016/j.wear.2006.06.018
|
|
[59]
|
M. S. Barrios, L. V. F. Gonzalez, M. A. V. Rodriguez and J. M. M. Pozas, “Acid Activation of a Palygorskite with HCl: Development of Physico-Chemical, Textural and Surface Properties,” Applied Clay Science, Vol. 10, No. 3, 1995, pp. 247-258. doi:10.1016/0169-1317(95)00007-Q
|
|
[60]
|
A. Corma, A. Misfud and E. Sanz, “Influence of the Chemical Composition and Textural Characteristics of Palygorskite on the Acid Leaching of Octahedral Cations,” Clay Minerals, Vol. 22, No. 2, 1987, pp. 225-232. doi:10.1180/claymin.1987.022.2.10
|
|
[61]
|
C. N. Rhodes, M. Franks, G. M. B. Parkes and D. R. Brown, “The Effect of Acid Treatment on the Activity of Clay Supports for ZnCl2 Alkylation Catalysts,” Journal of the Chemical Society, Chemical Communications, Vol. 12, 1991, pp. 804-807. doi:10.1039/c39910000804
|
|
[62]
|
S. Bahadur, “The Development of Transfer Layers and Their Role in Polymer Tribology,” Wear, Vol. 245, No. 1-2, 2000, pp. 92-99.
doi:10.1016/S0043-1648(00)00469-5
|
|
[63]
|
T. Suwa, M. Takehisa and S. Machi, “Melting and Crystallization Behavior of Poly (Tetrafluoroethylene). New Method for Molecular Weight Measurement of Poly (Tetrafluoroethylene) Using a Differential Scanning Calorimeter,” Journal of Applied Polymer Science, Vol. 17, No. 11, 1973, pp. 3253-3257.
doi:10.1002/app.1973.070171102
|
|
[64]
|
I. A. Ovid’Ko, “Deformation of Nanostructures,” Science, Vol. 295, No. 5564, 2002, pp. 2382-2386.
|
|
[65]
|
Q. H. Wang and Q. J. Xue, “Wear Mechanisms of Polyetheretherketone Composites Filled with Various Kinds of SiC,” Wear, Vol. 213, No. 1-2, 2007, pp. 54-58.
|
|
[66]
|
F. H. Su, Z. Z. Zhang, K. Wang, W. Jiang and W. M. Liu, “Friction and Wear Properties of Carbon Fabric Composites Filled with Nano-Al2O3 and Nano-Si2N4,” Journal of Composites Part A: Applied Science and Manufacturing, Vol. 37, No. 9, 2006, pp. 1351-1357.
doi:10.1016/j.compositesa.2005.08.017
|
|
[67]
|
E. Chabert, M. Bornert, E. Bourgeat-Lami, J. Y. Cavaille and C. Dendievel, “Filler-Filler Interactions and Viscoelastic Behavior of Polymer Nanocomposites,” Materials Science and Engineering: A, Vol. 381, No. 1-2, 2004, pp. 320-330. doi:10.1016/j.msea.2004.04.064
|
|
[68]
|
F. H. Su, Z. Z. Zhang and W. M. Liu, “Study on the Friction and Wear Properties of Glass Fabric Composites Filled with Nano- and Micro-Particles under Different Conditions.” Materials Science and Engineering: A, Vol. 392, No. 1-2, 2005, pp. 359-365.
doi:10.1016/j.msea.2004.09.036
|
|
[69]
|
K. Friedrich, Z. Zhang and P. Klein, “Wear of Polymercomposites,” In: P. Sydenham and R. Thorn, Eds., Handbook of Measuring System Design, John Wiley & Sons, Hoboken, 2005.
|
|
[70]
|
J. Bijwe J. J. Rajesh A. Jeyakumar, A. Ghosh and U. S. Tewari, “Influence of Solid Lubricants and Fiber Reinforcement on Wear Behavior of Polyethersulphone,” Tribology International, Vol. 33, No. 10, 2000, pp. 697-706. doi:10.1016/S0301-679X(00)00104-3
|
|
[71]
|
J. Wang, M. Gua, S. Bai and S. Ge, “Investigation of the Influence of MoS2 Filler on the Tribological Properties Ofcarbon Fiber Reinforced Nylon 1010 Composites,” Wear, Vol. 255, No. 1-6, 2003, pp. 774-779.
doi:10.1016/S0043-1648(03)00268-0
|
|
[72]
|
J. Bijwe V. Naidu, N. Bhatnagar and M. Fahim, “Optimum Concentration of Reinforcement and Solid Lubricant Tinpolyamide 12 Composites for Best Tribo-Performance in Two Wear Modes,” Tribology Letters, Vol. 21, 2006, pp. 59-66.
|
|
[73]
|
X. R. Zhang, X. Q. Pei and Q. H. Wang, “Effect of Solid lubricant on Thetribological Properties of Polyimide Composites Reinforced with Carbon Fibers,” Journal of Reinforced Plastics and Composites, Vol. 27, No. 18, 2009, pp. 2005-2012. doi:10.1177/0731684408090718
|
|
[74]
|
M. H. Cho and S. Bahadur, “Study of the Tribological Synergistic Effects in CuO-Filled and Fiber-Reinforced Polyphenylenesulfide Composites,” Wear, Vol. 258, No. 5-6, pp. 835-845. doi:10.1016/j.wear.2004.09.055
|
|
[75]
|
Z. Zhang, C. Breidt, L. Chang, F. Haupert and K. Friedrich, “Enhancement of the Wear Resistance of Epoxy: Short Carbon Fiber, Graphite, PTFE and Nano-TiO2” Composites Part A, Vol. 35, No. 12, 2004, pp. 1385-1392.
doi:10.1016/j.compositesa.2004.05.005
|
|
[76]
|
L. Chang, Z. Zhang, C. Breidt and K. Friedrich, “Tribological Properties of Epoxy Nanocomposites: I. Enhancement of the Wear Resistance by Nano-TiO2 Particles,” Wear, Vol. 258, No. 1-4, pp. 141-148.
doi:10.1016/j.wear.2004.09.005
|
|
[77]
|
Q. Guo, M. Z. Rong, G. L. Jia, K. T. Lau and M. Q. Zhang, “Sliding Wear Performance of Nano-SiO2/Short Carbon Fiber/Epoxy Hybrid Composites,” Wear, Vol. 266, No. 7-8, 2009, pp. 658-665.
doi:10.1016/j.wear.2008.08.005
|