Author(s)

Roma Raina, Mini Thomas

Faculty, Manipal University, Dubai, UAE.
Jamia Millia Islamia University, New Delhi, India.

For Power distribution system the most important task for distribution engineer is to efficiently simulate the system and address the uncertainty using a suitable mathematical method. This paper presents a comparison of two methods used in analyzing uncertainties. The first method is Montecarlo simulation (MCS) that considers input parameters as random variables and second one is fuzzy alpha cut method (FAC) in which uncertain parameters are treated as fuzzy numbers with given membership functions. Both techniques are tested on a typical Load flow solution simulation, where connected loads are considered as uncertain. In order to provide a basis for comparison between above two approaches, the shapes of the membership function used in the fuzzy method is taken same as the shape of the probability density function used in the Monte Carlo simulations. For more than one uncertain input variable, simulation result indicates that MCS method provides better output results compared to FAC, however takes more time due to number of runs. FAC provides an alternate method to MCS when addressing single or limited input variables and is fast.

Fuzzy Set; Radial Power Distribution; Montecarlo; Load Flow

R. Raina and M. Thomas, "Fuzzy vs. Probabilistic Techniques to Address Uncertainty for Radial Distribution Load Flow Simulation," Energy and Power Engineering, Vol. 4 No. 2, 2012, pp. 99-105. doi: 10.4236/epe.2012.42014.