Fatigue Responses of Three AA 2000 Series Aluminum Alloys

Journals Menu

Follow SCIRP

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Materials Science and Chemical Engineering

ISSN Print: 2327-6045
ISSN Online: 2327-6053
www.scirp.org/journal/msce
E-mail: msce@scirp.org

Citations

Journals Menu

"Fatigue Responses of Three AA 2000 Series Aluminum Alloys"
written by Gbadebo Moses Owolabi, Mark Thom, Olusegun Ajide, Nikhil Kumar, Amin Azimi, Horace Whitworth, Grant Warner,
published by Journal of Materials Science and Chemical Engineering, Vol.7 No.3, 2019

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Effect of solution treatment on porosity, tensile properties and fatigue resistance of Al–Cu alloy fabricated by wire arc additive manufacturing
	Journal of Materials …, 2024

[2]	Optimization of the shot peening time (SPT) in terms of mechanical properties and fatigue life of AA2024-T4
	AIP Conference …, 2024

[3]	Wire-arc additive manufactured Al–Cu alloy: microstructure, mechanical properties and their anisotropy
	Materials Science …, 2023

[4]	Effect of processing conditions on the fracture behavior of Al-5Zn-1.5 Mg-1.0 Mn-0.35 Cu alloy fabricated from recycled beverage cans (RBCs) for bumper beam …
	2021

[5]	Low Cycle Fatigue Properties of Sc-Modified AA2519-T62 Extrusion
	2020

[6]	Effect of Natural Aging and Fatigue Crack Propagation Rate on Welded and Non-Welded Aluminum Alloy (AA2219-T87)
	2019

[7]	Correlating corrosion modes with the microstructure of the 2XXX series alloys: A comparative approach

[1]	Optimization of the shot peening time (SPT) in terms of mechanical properties and fatigue life of AA2024-T4 ELECTROMECHANICAL ENGINEERING AND ITS APPLICATIONS, 2024 DOI:10.1063/5.0206464

[2]	New Materials, Processing and Manufacturability 2024 DOI:10.1002/9781394212736.ch1

[3]	Correlating corrosion modes with the microstructure of the 2XXX series alloys: A comparative approach Surface and Interface Analysis, 2024 DOI:10.1002/sia.7321

[4]	Effect of processing conditions on the fracture behavior of Al-5Zn-1.5Mg-1.0Mn-0.35Cu alloy fabricated from recycled beverage cans (RBCs) for bumper beam applications PROCEEDINGS OF 8TH INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS ENGINEERING & TECHNOLOGY (ICAMET 2020), 2021 DOI:10.1063/5.0051711

[5]	Low Cycle Fatigue Properties of Sc-Modified AA2519-T62 Extrusion Materials, 2020 DOI:10.3390/ma13010220

Follow SCIRP

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Materials Science and Chemical Engineering

Journal of Materials Science and Chemical Engineering

Journals Menu

Home

About SCIRP

Service

Policies