Influence of Degree of Cold-Drawing on the Mechanical Properties of Low Carbon Steel

Journals Menu

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Materials Sciences and Applications

ISSN Print: 2153-117X
ISSN Online: 2153-1188
www.scirp.org/journal/msa
E-mail: msa@scirp.org

Google-based Impact Factor: 1.34
Citations

Journals Menu

"Influence of Degree of Cold-Drawing on the Mechanical Properties of Low Carbon Steel"
written by Nurudeen A. Raji, Oluleke O. Oluwole,
published by Materials Sciences and Applications, Vol.2 No.11, 2011

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Effects of shear deformation via torsion on tensile strain-hardening behavior of SCM415 low-alloy steel
	Materials Today: Proceedings, 2022

[2]	Effects of Angle and Rate of Twist via Pre-Torsional Deformation on Tensile Properties and Hardness of Hot-Rolled, Low-Alloy Steel Rods
	Trends in Sciences, 2022

[3]	Influence of Deformation on Texture Development During Cold Drawing of Tubes
	Forming the Future, 2021

[4]	EXPERIMENTAL ANALYSIS OF AUTOMATICALLY MANUFACTURED CHAIN LINK FENCING WIRE
	2021

[5]	Texture Evolution during Cold Drawing of Steel Tube with Respect to the Stress-Strain State
	2020

[6]	MECHANICAL BEHAVIOR AND TEXTURE EVOLUTION STUDYOF MEDIUM CARBON STEEL WIRES DURING INDUSTRIAL WIRE-DRAWING PROCESS
	2019

[7]	Microstructure and Mechanical Properties of Cold Rolled AISI 1018 Low Carbon Steel
	2019

[8]	Optimization of the Fabrication of Cold Drawn Steel Wire Through Classification and Clustering Machine Learning Algorithms
	2019

[9]	DESIGN AND ANALYSIS OF PROCESS PARAMETERS ON MULTISTAGE WIRE DRAWING PROCESS-A REVIEW
	International Journal of Mechanical and Production Engineering Research and Development, 2019

[10]	Підвищення ефективності волочіння звар юваль ного дроту з маловуглецевих сталей на основі теорії деформовності
	2019

[11]	Karbon oranının alaşımsız çelik filmaşinlerden elde edilen tel ürünlerin performansına etkisi
	2019

[12]	ПІДВИЩЕННЯ ЕФЕКТИВНОСТІ ВОЛОЧІННЯ ЗВАРЮВАЛЬНОГО ДРОТУ З МАЛОВУГЛЕЦЕВИХ СТАЛЕЙ НА ОСНОВІ ТЕОРІЇ ДЕФОРМОВНОСТІ
	2019

[13]	Mechanical behavior and texture evolution study of medium carbon steel wires during industrial wire-drawing process
	… on Metallurgy and …, 2019

[14]	The Study of the Effect of Mechanical and Heat Treatment on the Crystal Texture of Cold Drawn Seamless Tubes
	2018

[15]	Investigation the Effect of Roller's Speed and Diameter on Coefficient of Friction During Rolling Process
	International Journal of Mechanical & Mechatronics Engineering, 2018

[16]	Optimasi Proses Annealing pada Proses Fine Drawing Untu Kmemperbaiki Sifat Mekanis Produk Kawat Tembaga
	2018

[17]	Evolution of deformation texture in cold drawing of steel tubes using EBSD analysis and FEM simulation
	2018

[18]	Metodología para el estudio y diseño tecnológico del proceso secuencial de estirado multi-etapa de alambre y barras de sección circular.
	2017

[19]	COLD DRAWING OF STRAIN HARDENING CARBON STEEL
	Journal of Manufacturing Technology Research, 2017

[20]	Modeling and Analysis of Cold Drawing Process: Parameters and Methods
	Handbook of Research on Manufacturing Process Modeling and Optimization Strategies, 2017

[21]	Phenomenological Model of Low-Carbon Steels Hardening during Multistage Drawing
	Solid State Phenomena, 2017

[22]	COLD DRAWING OF STRAIN HARDENING CARBON STEEL.
	Journal of Manufacturing Technology Research, 2017

[23]	Micromechanically guided design of graded ultrafine-grained dual-phase steel
	Dissertation, 2016

[24]	Pengaruh Proses Deformasi Plastis Dengan Metode Hammering Terhadap Sifat Mekanis Dan Microstruktur Baja Bohler K460 (AISI O1)
	2016

[25]	Study and development of empirical relations among various physical parameters of LPG cylinder material and suggest fail safe inspection plan for manufacturing
	2015

[26]	Optimasi Proses Annealing Pada Proses Fine Drawing Untuk Memperbaiki Sifat Mekanis Produk Kawat Tembaga
	2015

[27]	Influence of the Degree of Cold Drawing on the Microstructure and Properties of Pipes Used for Dampers
	Advanced Materials Research, 2014

[28]	Phase Field Simulation for Recrystallization Kinetics of Cold-Drawn 0.12 wt% C Steel in Full Annealing
	NA Raji, OO Oluwole - ijser.org, 2014

[29]	RESPONSE SURFACE OPTIMIZATION OF SOME PROPERTIES OF PROCESS ANNEALED LOW CARBON STEEL
	NA Raji, OO Oluwole - ijser.org, 2014

[30]	Microstructure Evolution and its Influence onTensileBehavior of Process Annealed Cold Drawn 0.12 wt% C Steel
	NA Raji, OO Oluwole - ijser.org, 2014

[31]	Microestructura y propiedades mecánicas del Acero AISI 1016 calibrado procesado por ECAP
	Universitas Scientiarum, 2014

[32]	Microstructure and mechanical properties of cold drawn AISI 1016 steel processed by ECAP
	Universitas Scientiarum, 2014

[33]	COMPARATIVE ANALYSIS OF LPG CYLINDER HARDNESS VALUES OBTAINED FROM BRINELL HARDNESS TEST AND PORTABLE HARDNESS TESTER
	Int J Adv Engg Tech/IV/III/July-Sept, 2013

[34]	Recrystallization Kinetics and Microstructure Evolution of Annealed Cold-Drawn Low-Carbon Steel
	Journal of Crystallization Process and Technology, 2013

[35]	STUDY ON LPG CYLI
	Int J Adv Engg Tech/IV/III/July-Sept, 2013

[1]	Forming the Future The Minerals, Metals & Materials Series, 2021 DOI:10.1007/978-3-030-75381-8_60

[2]	Texture Evolution during Cold Drawing of Steel Tube with Respect to the Stress - Strain State Defect and Diffusion Forum, 2020 DOI:10.4028/www.scientific.net/DDF.405.115

[3]	Optimization of the Fabrication of Cold Drawn Steel Wire Through Classification and Clustering Machine Learning Algorithms IEEE Access, 2019 DOI:10.1109/ACCESS.2019.2942957

[4]	The Study of the Effect of Mechanical and Heat Treatment on the Crystal Texture of Cold Drawn Seamless Tubes Manufacturing Technology, 2018 DOI:10.21062/ujep/142.2018/a/1213-2489/MT/18/4/585

[5]	The Study of the Effect of Mechanical and Heat Treatment on the Crystal Texture of Cold Drawn Seamless Tubes Manufacturing Technology, 2018 DOI:10.21062/ujep/142.2018/a/1213-2489/MT/18/4/585

[6]	The Study of the Effect of Mechanical and Heat Treatment on the Crystal Texture of Cold Drawn Seamless Tubes Manufacturing Technology, 2018 DOI:10.21062/ujep/142.2018/a/1213-2489/MT/18/4/585

[7]	The Study of the Effect of Mechanical and Heat Treatment on the Crystal Texture of Cold Drawn Seamless Tubes Manufacturing Technology, 2018 DOI:10.21062/ujep/142.2018/a/1213-2489/MT/18/4/585

[8]	The Study of the Effect of Mechanical and Heat Treatment on the Crystal Texture of Cold Drawn Seamless Tubes Manufacturing Technology, 2018 DOI:10.21062/ujep/142.2018/a/1213-2489/MT/18/4/585

[9]	Evolution of deformation texture in cold drawing of steel tubes using EBSD analysis and FEM simulation IOP Conference Series: Materials Science and Engineering, 2018 DOI:10.1088/1757-899X/461/1/012010

[10]	Phenomenological Model of Low-Carbon Steels Hardening during Multistage Drawing Solid State Phenomena, 2017 DOI:10.4028/www.scientific.net/SSP.265.114

[11]	Handbook of Research on Manufacturing Process Modeling and Optimization Strategies Advances in Logistics, Operations, and Management Science, 2017 DOI:10.4018/978-1-5225-2440-3.ch003

[12]	Influence of the Degree of Cold Drawing on the Microstructure and Properties of Pipes Used for Dampers Advanced Materials Research, 2014 DOI:10.4028/www.scientific.net/AMR.1036.134

[13]	Recrystallization Kinetics and Microstructure Evolution of Annealed Cold-Drawn Low-Carbon Steel Journal of Crystallization Process and Technology, 2013 DOI:10.4236/jcpt.2013.34025

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Materials Sciences and Applications

Materials Sciences and Applications

Journals Menu

Home

About SCIRP

Service

Policies