has been cited by the following article(s):
|
[1]
|
Application of a Distributed Element Roughness Model to Additively Manufactured Internal Cooling Channels
Journal of Turbomachinery,
2023
DOI:10.1115/1.4062838
|
|
|
|
|
[2]
|
Comparison Between Prandtl’s Mixing Length Model and DNS Data for a Channel Flow Up to Reτ ≈ 5200
Bulletin of the Polytechnic Institute of Iași. Machine constructions Section,
2022
DOI:10.2478/bipcm-2022-0008
|
|
|
|
|
[3]
|
Comparison Between Prandtl’s Mixing Length Model and DNS Data for a Channel Flow Up to Reτ ≈ 5200
Bulletin of the Polytechnic Institute of Iași. Machine constructions Section,
2022
DOI:10.2478/bipcm-2022-0008
|
|
|
|
|
[4]
|
Comparison Between Prandtl’s Mixing Length Model and DNS Data for a Channel Flow Up to Reτ ≈ 5200
Bulletin of the Polytechnic Institute of Iași. Machine constructions Section,
2022
DOI:10.2478/bipcm-2022-0008
|
|
|
|
|
[5]
|
Comparison Between Prandtl’s Mixing Length Model and DNS Data for a Channel Flow Up to Reτ ≈ 5200
Bulletin of the Polytechnic Institute of Iași. Machine constructions Section,
2022
DOI:10.2478/bipcm-2022-0008
|
|
|
|
|
[6]
|
Analysis of the different sources of stress acting in fully rough turbulent flows over geometrical roughness elements
Physics of Fluids,
2020
DOI:10.1063/5.0010771
|
|
|
|
|
[7]
|
Analysis of the different sources of stress acting in fully rough turbulent flows over geometrical roughness elements
Physics of Fluids,
2020
DOI:10.1063/5.0010771
|
|
|
|
|
[8]
|
On the importance of the drag coefficient modelling in the double averaged Navier-Stokes equations for prediction of the roughness effects
Journal of Turbulence,
2020
DOI:10.1080/14685248.2020.1817465
|
|
|
|