Effect of Machining Parameters on Tool Wear and Nodal Temperature in Hard Turning of AISI D3 Steel

Journals Menu

Follow SCIRP

ISSN Print: 2333-9705
ISSN Online: 2333-9721
www.scirp.org/journal/oalibj
E-mail: service@oalib.com

"Effect of Machining Parameters on Tool Wear and Nodal Temperature in Hard Turning of AISI D3 Steel"
written by Varaprasad Bhemuni, Srinivasa Rao Chelamalasetti, Siva Prasad Kondapalli,
published by Open Access Library Journal, Vol.1 No.6, 2014

has been cited by the following article(s):

[1]	Performance Analysis of Hybrid Ceramic Insert in Dry Turning of Hardened Tool Steel
	Arabian Journal for Science and Engineering, 2022

[2]	Analysis and prediction of tool wear in dry turning of hardened D3 steel using hybrid insert: A novel wear map approach
	… of the Institution of Mechanical Engineers …, 2022

[3]	Heat pipe-embedded tooling for sustainable manufacturing
	2021

[4]	Dry turning of AISI D3 steel using a mixed ceramic insert: A study
	2019

[5]	Étude de l'évaluation de l'usinabilité d'un acier à outil pour travail à froid X210Cr12 avec une céramique mixte Al2O3/TiC utilisant différentes méthodes statistiques
	2018

[6]	EFFECT OF COATING THICKNESS WITH CARBIDE TOOL IN HARD TURNING OF AISID3 COLD WORK STEEL
	International Research Journal of Engineering and Technology, 2017

[7]	An overview of current status of cutting fluids and cooling techniques of turning hard steel
	International Journal of Heat and Mass Transfer, 2017

[1]	Analysis and prediction of tool wear in dry turning of hardened D3 steel using hybrid insert: A novel wear map approach Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2022 DOI:10.1177/09544054221076242

[2]	Performance Analysis of Hybrid Ceramic Insert in Dry Turning of Hardened Tool Steel Arabian Journal for Science and Engineering, 2022 DOI:10.1007/s13369-022-06639-2

[3]	Evaluation of Process Influencing Parameters In Machining Of AISI 1040 Medium Carbon Steel Using Taguchi Based PCA Method REST Journal on Emerging trends in Modelling and Manufacturing, 2021 DOI:10.46632/7/4/6

Follow SCIRP