Effect of Surface Porosity on Tribological Properties of Sintered Pure Al and Al 6061

Journals Menu

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Materials Sciences and Applications

ISSN Print: 2153-117X
ISSN Online: 2153-1188
www.scirp.org/journal/msa
E-mail: msa@scirp.org

Google-based Impact Factor: 1.34
Citations

Journals Menu

"Effect of Surface Porosity on Tribological Properties of Sintered Pure Al and Al 6061"
written by Avijit Sinha, Zoheir Farhat,
published by Materials Sciences and Applications, Vol.6 No.6, 2015

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Assessment of the microstructure and abrasive wear properties of an A380/NbC aluminum composite produced by stir casting
	International Journal of …, 2024

[2]	Influence of Humidity on the Tribological Performance of Aluminium Anodic Oxide Reinforced Graphite Composite Coating
	Tribology …, 2024

[3]	Tribological performance of laser shock peened cold spray additive manufactured 316L stainless steel
	Journal of Tribology, 2023

[4]	Evaluation of Microstructural, Mechanical and Corrosion Behaviours of Laminated AA6061/AA7075 Metal Matrix Composites Build by Friction Stir Additive …
	Materials Research, 2023

[5]	Effect of zinc addition on the tribological behavior of aluminum-based close-cell metal foams
	Kovove Mater, 2023

[6]	Study on the Behaviour of Surface Wear and Friction for a Pure Aluminium Casting Product Using Permanent Mould
	Key Engineering Materials, 2023

[7]	Post welding cold forging and effect on mechanical properties of low-carbon mild steel wire arc additive manufacturing
	Post-processing Techniques for …, 2023

[8]	Effect of Graphite Addition on Aluminum Hybrid Matrix Composite by Powder Metallurgy Method
	Revue des Composites et des …, 2022

[9]	Duplex electroless Ni-P/Ni-Cu-P coatings: Preparation, evaluation of microhardness, friction, wear, and corrosion performance
	Journal of Electrochemical Science and …, 2022

[10]	The analysis of microstructure and mechanical properties in B4C reinforced Al–Zn alloy matrix composites manufactured using a new sintering approach
	Russian Journal of Non-Ferrous Metals, 2022

[11]	Investigation of solid particle erosion behavior of Al-Al2O3 and Al-ZrO2 metal matrix composites fabricated through powder metallurgy technique
	Tribology International, 2022

[12]	Titanium boride and titanium silicide phase formation by high power diode laser alloying of B4C and SiC particles with Ti: Microstructure, hardness and wear studies
	Materials Today …, 2022

[13]	A Comparative Study on Microstructure and Tribological Properties of Al/Gr Composites Prepared via Conventional and Flake Powder Metallurgy Techniques
	Metallography, Microstructure, and Analysis, 2022

[14]	Tribology of Spray-Formed Aluminum Alloys and Their Composites
	Tribology and Surface …, 2021

[15]	Metal Matrix Composites Prepared by Powder Metallurgy Route
	2021

[16]	Influence of Porosity on Wear Resistance of Sintered Titanium under Boundary Lubrication
	Journal of Friction and Wear, 2021

[17]	Mechanical and Tibological Properties of SLM AlSi10Mg Alloy Subjected to ECAP
	Solid State Phenomena, 2021

[18]	Учредители: Государственное научное учреждение Институт механики металлополимерных систем имени ВА Белого НАН Беларуси
	ТРЕНИЕ И ИЗНОС, 2021

[19]	Влияние пористости на износостойкость спеченного титана в условиях граничной смазки
	Трение и износ, 2021

[20]	Effect of T6 heat treatment on the surface tribological and corrosion properties of AlSi10Mg samples produced by selective laser melting
	2021

[21]	Effect of copper incorporation on phase transformation behavior of electroless nickel–phosphorous coating and its effect on the tribological behavior
	2021

[22]	Novel hybrid method to additively manufacture denser graphite structures using Binder Jetting
	2021

[23]	Effect of Different Sintering Temperatures on Microstructure and Mechanical Properties for Pure Al Material Produced by Powder Metallurgy
	2021

[24]	Oxidation issues during heat treatment and effect on the tribo-mechanical performance of electroless Ni-P–Cu deposits
	2021

[25]	Mechanical, electrical, and biological properties of mechanochemically processed hydroxyapatite ceramics
	Nanomaterials, 2021

[26]	Effect of SiCp reinforcement on mechanical properties of Al 6061 by Powder Metallurgy
	2020

[27]	A Statistical Assessment of Casting Quality–Tribological Properties of Eutectic Al-12Si Alloy: Effect of Mg
	2020

[28]	Caracterización de recubrimientos de aluminio procesados por proyección fría (Cold Spray) para reparaciones aeronáuticas
	2020

[29]	Investigation of mechanical and tribological properties of hybrid green eggshells and graphite-reinforced aluminum composites
	2020

[30]	High-strength Al0. 2Co1. 5CrFeNi1. 5Ti high-entropy alloy produced by powder metallurgy and casting: A comparison of microstructures, mechanical and tribological …
	2020

[31]	Thermal shock resistance of yttrium aluminium oxide Y3Al5O12 thermal barrier coating for titanium alloy
	2020

[32]	Strengthening of the mechanical and tribological properties of composite oxide film formed on aluminum alloy with the addition of graphite
	2020

[33]	Enhancing the Microstructure and Tribological Performance of Spray Formed Al Alloy by Cryorolling
	2020

[34]	Studies on mechanical properties of the sintered bronze-graphite composites
	2019

[35]	Investigations for Surface Hardness of Aluminum Matrix Composites with Hybrid Reinforcement
	2019

[36]	Investigation of nanomechanical and adhesion behavior for AlN coating and AlN/Fe2-3N composite coatings created by Active Screen Plasma Nitriding on Al 1050
	2019

[37]	Tribological studies of the sintered bronze—tungsten disulfide composites
	2019

[38]	Effects of Waste Eggshells addition on Microstructures, Mechanical and Tribological Properties of Green Metal Matrix Composite
	2019

[39]	Theoretical analysis and experimental investigation of contact fatigue and surface damage in prealloyed and diffusion bonded sintered steels
	2018

[40]	Study on the densification behavior of aluminum powders using microwave hot pressing process
	The International Journal of Advanced Manufacturing Technology, 2018

[41]	Study on the densification behavior of aluminum powders using microwave hot pressing process.
	2018

[42]	Ni-base superalloy powder-processed porous layer for gas cooling in extreme environments
	Powder Metallurgy, 2016

[1]	Study on the Behaviour of Surface Wear and Friction for a Pure Aluminium Casting Product Using Permanent Mould Key Engineering Materials, 2023 DOI:10.4028/p-y1qvb0

[2]	Tribological Performance of Laser Shock Peened Cold Spray Additive Manufactured 316L Stainless Steel Journal of Tribology, 2023 DOI:10.1115/1.4062102

[3]	Assessment of the Microstructure and Abrasive Wear Properties of an A380/NbC Aluminum Composite Produced by Stir Casting International Journal of Metalcasting, 2023 DOI:10.1007/s40962-023-01154-y

[4]	Study on the Behaviour of Surface Wear and Friction for a Pure Aluminium Casting Product Using Permanent Mould Key Engineering Materials, 2023 DOI:10.4028/p-y1qvb0

[5]	The Analysis of Microstructure and Mechanical Properties in B4C Reinforced Al–Zn Alloy Matrix Composites Manufactured Using a New Sintering Approach Russian Journal of Non-Ferrous Metals, 2022 DOI:10.3103/S1067821222030129

[6]	Mechanical, Electrical, and Biological Properties of Mechanochemically Processed Hydroxyapatite Ceramics Nanomaterials, 2021 DOI:10.3390/nano11092216

[7]	Mechanical and Tibological Properties of SLM AlSi10Mg Alloy Subjected to ECAP Solid State Phenomena, 2021 DOI:10.4028/www.scientific.net/SSP.326.33

[8]	Effect of SiCp reinforcement on mechanical properties of Al 6061 by Powder Metallurgy IOP Conference Series: Materials Science and Engineering, 2020 DOI:10.1088/1757-899X/988/1/012063

[9]	Tribological studies of the sintered bronze—tungsten disulfide composites Materials Research Express, 2019 DOI:10.1088/2053-1591/ab1a8c

[10]	Effects of Waste Eggshells addition on Microstructures, Mechanical and Tribological Properties of Green Metal Matrix Composite Science and Engineering of Composite Materials, 2019 DOI:10.1515/secm-2019-0027

[11]	Effects of Waste Eggshells addition on Microstructures, Mechanical and Tribological Properties of Green Metal Matrix Composite Science and Engineering of Composite Materials, 2019 DOI:10.1515/secm-2019-0027

[12]	Investigations for Surface Hardness of Aluminum Matrix Composites with Hybrid Reinforcement Transactions of the Indian Institute of Metals, 2018 DOI:10.1007/s12666-018-1472-z

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Materials Sciences and Applications

Materials Sciences and Applications

Journals Menu

Home

About SCIRP

Service

Policies