Modeling and Numerical Simulation of Material Science

Modeling and Numerical Simulation of Material Science

ISSN Print: 2164-5345
ISSN Online: 2164-5353
www.scirp.org/journal/mnsms
E-mail: mnsms@scirp.org
"Micromechanical Analysis of Thermal Expansion Coefficients"
written by Christian Karch,
published by Modeling and Numerical Simulation of Material Science, Vol.4 No.3, 2014
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] A mechanical model for predicting the thermal expansion behavior of spherical particle reinforced epoxy composites
Polymer …, 2024
[2] Identification of Lightning Strike Damage Severity Using Pulse Thermography Through Integration of Thermal Data
Barton, OT Thomsen - Experimental Techniques, 2024
[3] Tribological, mechanical, and metallurgical performance of natural fiber-reinforced composites: A comprehensive review
Proceedings of the …, 2024
[4] Crack-reduced laser powder bed fused oxide ceramic parts by in-situ synthesis of negative thermal expansion phases
Journal of the European …, 2024
[5] Multiphysical and Multi Scale Modelling of Composite Materials for Aircraft De-Icing
2023
[6] Intrastructural Thermal Stresses in Composites with Homogeneous and Heterogeneous Spherical Inclusions
Strength of Materials, 2023
[7] Effect of geometrical configurations of fiber on the effective properties of unidirectional carbon-fiber/epoxy composite
… Journal of Advanced …, 2023
[8] A review on the Representative Volume Element-based multi-scale simulation of 3D woven high performance thermoset composites manufactured using resin …
Composites Part A …, 2023
[9] Graphene-Magnesium Core-Shell Nanocomposites: Physical, Mechanical, Thermal, and Electrical Properties
Advanced Composite Materials and Structures, 2022
[10] Thermal-damage suppression of composite material by anti-lightning NCF/CIPCF film
Composites Science and Technology, 2022
[11] Multi-scale modelling and simulation of effective properties of perforated sheets with periodic patterns
Meccanica, 2022
[12] Modelling negative thermomechanical effects in reinforced road structures with thermoelastic incompatibility of coating and reinforcement materials
System research and …, 2022
[13] Towards Crack-Free Laser Manufactured Oxide Ceramic Parts by In-Situ Synthesis of Negative-Thermal-Expansion Phases
SSRN Electronic Journal, 2022
[14] Evaluation and Comparison of Coefficient of Thermal Expansion of Esthetic Restorative Materials
Importance of COVID …, 2021
[15] Multiscale thermoviscoelastic modeling of composite materials
2021
[16] Influence of Temperature-Dependent Resin Behavior on Numerical Prediction of Effective CTEs of 3D Woven Composites
Proceedings of the 36th ASC …, 2021
[17] Micromechanical Modeling and Evaluation of Process-Induced Residual Stresses in 3D Woven Composites
2021
[18] Characterization of Hybrid Composites with Polyester Waste Fibers, Olive Root Fibers and Coir Pith Micro-Particles Using Mixture Design Analysis for Structural …
Polymers, 2021
[19] Practical Approbation of Thermodynamic Criteria for the Consolidation of Bimetallic and Functionally Gradient Materials
Metals, 2021
[20] A Comprehensive Approach to Modeling Freezing in Mechanical Bearings Considering Bridge Thermal Effects
2021
[21] Image-based numerical modeling for the effective thermo-elastic property of 4D carbon/carbon composite at high temperatures
2021
[22] Effective stiffness and thermal expansion of three-phase multifunctional polymer electrolyte coated carbon fibre composite materials
2021
[23] An efficient multi-scale computation of the macroscopic coefficient of thermal expansion: Application to the Resin Transfer Molding manufactured 3D woven …
2021
[24] Modeling of functionally graded materials to estimate effective thermo-mechanical properties
2021
[25] Comportement thermomécanique des matériaux fragiles microfissurés avec prise en compte des effets unilatéraux: approches théoriques et numériques
2020
[26] The Effect of Titanium Oxide Additions on the Phase Chemistry and Properties of Chromite-Magnesia Refractories
2020
[27] Study of thermal and structural characteristics of mechanically milled nanostructured Al-Cu-Fe quasicrystals
2020
[28] Analysis of coefficient of thermal expansion in carbon black filled PDMS composite
2020
[29] Experimental And Numerical Characterization Of PCB-Embedded Power Dies Using Solderless Pressed Metal Foam
2020
[30] An analytical approach to determine coefficients of thermal expansion of CNT/polymer nanocomposites
2020
[31] Tailoring Thermal Expansion in Additively Manufactured Titanium Alloys to Enable Functional Grading
2020
[32] Thermomechanical behaviour of multi-cracked brittle media taking into account unilateral effects: theoretical and numerical approaches
2020
[33] Caracterización térmica y mecánica de materiales compuestos de matriz epóxica reforzados con partículas cerámicas termomióticas
2020
[34] Sur un estimateur micromécanique de type Eshelby général et explicite pour l'élasticité, la thermique et la thermoélasticité: application aux inclusions multicouches
2020
[35] Untersuchungen zum diodenlaserbasierten in-situ Tapelegen als Produktionstechnologie für einen großserienfähigen hybriden Leichtbau
Apprimus Verlag, 2020
[36] Matériaux composites Argent/Carbone à propriétés thermiques adaptatives
2019
[37] An efficient analytical homogenization technique for mechanical-hygrothermal responses of unidirectional composites with applications to optimization and multiscale …
2019
[38] Prediction of Thermal Expansion Coefficients using the Second Phase Fraction and Void of Al-AlN Composites Manufactured by Gas Reaction Method
2019
[39] Determination of the effective thermoelastic properties of cork-based agglomerates
2019
[40] Multiscale modeling of short fibre reinforced composites and it's relationship to modal analysis of machinery parts
2019
[41] Constitutive modeling for time-and temperature-dependent behavior of composites
2019
[42] TEMPERATURE DEPENDENT DIMENSIONAL CHANGES OF COMPOSITES WITH LOW FILLER CONTENT
JKCD, 2019
[43] Theoretical prediction for thermal expansion coefficients of unidirectional fiber‐reinforced composites with variable elliptical cross‐sections
2019
[44] Micromechanical RVE model application for generalization of smart composite laminate structures with thermoelastic characteristics
Materials Research Express, 2018
[45] Micromechanics based multi-level model for predicting the coefficients of thermal expansion of hybrid fiber reinforced concrete
Construction and Building Materials, 2018
[46] Modelling mechanical lightning loads in carbon fibre-reinforced polymers
2018
[47] 열 효과 및 초음속 흐름을 고려한 압전 적층복합재료에 미소기계적 물성 응용
2018
[48] Fast and accurate two-field reduced basis approximation for parametrized thermoelasticity problems
Finite Elements in Analysis and Design, 2018
[49] Anisotropy of thermal expansion of 3Y-TZP, α-Al2O3 and composites from 3Y-TZP/α-Al2O3 system
Archives of Civil and Mechanical Engineering, 2018
[50] An efficient analytical homogenization technique for mechanical-hygrothermal responses of unidirectional composites with applications to optimization and multiscale analyses
Chinese Journal of Aeronautics, 2018
[51] A Review on Thermomechanical Properties of Polymers and Fibers Reinforced Polymer Composites
Journal of Industrial and Engineering Chemistry, 2018
[52] H-atmospheres of Icy Super-Earths Formed In Situ in the Outer Solar System: An Application to a Possible Planet Nine
The Astrophysical Journal, 2017
[53] Thermo-chemo-mechanical Effective Properties for Homogeneous and Heterogeneous n-Phase Mixtures with Application to Curing
Procedia CIRP, 2017
[54] Multiphysics and Multiscale Simulation for the Design of Microstructured Materials and Miniaturized Active Devices
2017
[55] Functional Polymer Composite Encapsulants for Electronic Packaging
2017
[56] (n)- AND (n + 1)-LAYERED COMPOSITE SPHERE MODELS FOR THERMO-CHEMO-MECHANICAL EFFECTIVE PROPERTIES
2017
[57] Numerical determination of elastic and viscoelastic properties of aligned continuous and discontinuous fiber reinforced composites.
2016
[58] Thermomechanical response of metal-ceramic graded composites for high-temperature aerospace applications
ProQuest Dissertations Publishing, 2016
[59] Fast and certified two-field reduced basis approximation for parametrized coupled thermoelasticity problems: computation of the effective coefficient of thermal expansion for heterogeneous composites
2016
[60] Microencapsulated phase change composite materials for energy efficient buildings
2016
[61] Coefficient of thermal expansion of particulate composites with ceramic inclusions
Ceramics International, 2016
[62] Residual Stresses and Oxidation of Silicon Carbide Fiber Reinforced Silicon Carbide Composites
2016
[63] Lightning Protection of Carbon Fibre Reinforced Plastics–An Overview–
2016
[64] A three-scale framework for fibre-reinforced-polymer curing Part I: Microscopic modeling and mesoscopic effective properties
International Journal of Solids and Structures, 2016
[65] Thermomechanical properties of zirconium tungstate/hydrogenated nitrile butadiene rubber (HNBR) composites for low-temperature applications
Journal of Materials Science, 2016
[66] Lightning protection of carbon fibre reinforced plastics—An overview
2016
[67] Micromechanical finite element predictions of a reduced coefficient of thermal expansion for 3D periodic architectured interpenetrating phase composites
Composite Structures, 2015
[68] MODIFISERT PAKNING FOR ARKTISKE BETINGELSER
2015
[69] Calculation of Effective Coefficient of Thermal Expansion for Composite'Glass-Eucryptite'Changing During Sintering.
Applied Mechanics & Materials, 2015
[70] ПРО ВНУТРІШНІЙ МЕХАНІЗМ ТЕРМОПОШКОДЖЕНЬ В АРМОВАНИХ КОМПОЗИТАХ З ТЕРМОМЕХАНІЧНОЮ НЕСУМІСНІСТЮ ЇХ ФАЗ
[71] Fast and certified two-field reduced basis approximation for parametrized coupled thermoelasticity problems: computation of the effective coefficient of …
KC Hoang
Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top