Finite Element Analysis of the Groove Pressing of Aluminum Alloy

Journals Menu

Follow SCIRP

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Modeling and Numerical Simulation of Material Science

ISSN Print: 2164-5345
ISSN Online: 2164-5353
www.scirp.org/journal/mnsms
E-mail: mnsms@scirp.org

Google-based Impact Factor: 1.5
Citations

Journals Menu

"Finite Element Analysis of the Groove Pressing of Aluminum Alloy"
written by Mehdi Shaban Ghazani, Akbar Vajd,
published by Modeling and Numerical Simulation of Material Science, Vol.4 No.1, 2014

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Constrained Constant Radius Pressing (CCRP) process to improve mechanical properties and microstructural homogeneity of pure copper sheet
	Materials Today …, 2024

[2]	Effect of Die Profile on Strain Inhomogeneity During Constrained Groove Pressing
	Transactions of the …, 2024

[3]	Experimental and numerical study of the longitudinal and transverse residual stresses distribution in the constrained groove pressing process of pure copper sheets
	Proceedings of the …, 2022

[4]	Experimental and Numerical Investigation of Mechanical Properties in the Ultrasonic Assisted constraint groove pressing process of copper sheets
	2020

[5]	CHARACTERISATION OF TITANIUM ALLOY PROCESSED BY CONSTRAINED BENDING AND STRAIGHTENING SEVERE PLASTIC DEFORMATION
	2020

[6]	Estudio electroquímico del acero AISI 316l sometido a deformación plástica severa mediante la técnica de Presión Calibrada
	2020

[7]	Bending Forces and Hardness Properties of Ti6Al4V Alloy Processed by Constrained Bending and Straightening Severe Plastic Deformation
	2020

[8]	Experimental and Numerical Study of Severe Plastic Deformation in the Constrained Groove Pressing Process on the Pure Copper Sheets
	2019

[9]	SIMULACIÓN DE LA DEFORMACIÓN PLÁSTICA POR CORRUGACIÓN-ESTIRAMIENTO DEL TITANIO GRADO 2
	2019

[10]	Effect of Coating Process Parameters on the Development of Residual Stresses in Ceramic Coatings
	2019

[11]	Influence of Precipitation and Dislocation Density on Flow Stress Characteristics Under Compression Deformation of Heat-Treated 17-4 PH Stainless Steel Alloy
	2019

[12]	Numerical Investigation on Strain Properties of Ti6Al4V Alloy Processed by Constrained Bending and Straightening Severe Plastic Deformation
	2019

[13]	Simulation Studies and Evolution of Mechanical Properties of AA6061 Subjected to RCS
	Advanced Materials …, 2018

[14]	Simulation studies on RCS processed Al-Mg-Sc alloy
	2018

[15]	High toughness magnesium alloy through severe plastic deformation and short annealing
	2018

[16]	Experimental Investigation of Mechanical Behavior of a Polyamide before and after Constrained Groove Pressing Process
	International Journal of Engineering Research in Africa, 2018

[17]	Performance and Prospects of Severe Plastic Deformation for Effective Biomedical Titanium Alloys
	2018

[18]	Finite element analysis of the deformation behaviour of pure aluminium in repetitive corrugation-straightening and constrained groove pressing
	International Journal of Manufacturing Technology and Management, 2018

[19]	EŞİT KANALLI AÇISAL PRESLEME YÖNTEMİNİN İNCELENMESİ VE 6063 ALÜMİNYUM ALAŞIMINA UYGULANMAS
	2017

[20]	ELEMENTOS FINITOS DE LA DEFORMACIÓN PLÁSTICA SEVERA EN LÁMINAS DE TITANIO
	2017

[21]	Modeling of bake-hardening effect for fine grain bainite-aided dual phase steel
	Materials & Design, 2017

[22]	Microstructure, hardness homogeneity, and tensile properties of 1050 aluminum processed by constrained groove pressing
	Applied Physics A, 2017

[23]	Simulación por el método de elementos finitos de la deformación plástica severa en láminas de titanio
	2017

[24]	Finite Element Analysis of ECAP, TCAP, RUE and CGP Processes
	IOP Conference Series: Materials Science and Engineering, 2016

[25]	Microstructural Inhomogeneity in Constrained Groove Pressed Cu-Zn Alloy Sheet
	Journal of Materials Engineering and Performance, 2016

[26]	Effect of Fine Grained Dual Phase Steel on Bake Hardening Properties
	steel research international, 2016

[27]	Constrained groove pressing for sheet metal processing
	Progress in Materials Science, 2016

[28]	The Study of the Behavior of Constrained Groove Pressed Magnesium Alloy after Heat Treatment
	Acta Physica Polonica, A., 2015

[29]	Finite element analysis of medium-wheel Bulldozer earth-moving shovel arm based on ANSYS
	2014

[30]	هدافتسا اب RCS و CGP یاهدنيآرف رد صلاخ موينيمولآ لکش رييغت راتفر یسررب دودحم ناملا زيلانآ زا‎


[31]	Eşit kanallı açısal presleme yönteminin incelenmesi ve 6063 alüminyum alaşımına uygulanması

[1]	Effect of Die Profile on Strain Inhomogeneity During Constrained Groove Pressing Transactions of the Indian Institute of Metals, 2024 DOI:10.1007/s12666-023-03196-6

[2]	Effect of Die Profile on Strain Inhomogeneity During Constrained Groove Pressing Transactions of the Indian Institute of Metals, 2024 DOI:10.1007/s12666-023-03196-6

[3]	A profound study of damage behavior for Al 2024-T3 alloy worksheet produced by constrained groove pressing in the superior practical condition Scientific Reports, 2024 DOI:10.1038/s41598-024-68767-z

[4]	Advances in Material Sciences and Engineering Lecture Notes in Mechanical Engineering, 2020 DOI:10.1007/978-981-13-8297-0_41

[5]	Performance and Prospects of Severe Plastic Deformation for Effective Biomedical Titanium Alloys Journal of Modern Materials, 2018 DOI:10.21467/jmm.5.1.8-23

[6]	Simulation Studies and Evolution of Mechanical Properties of AA6061 Subjected to RCS Advanced Materials Research, 2018 DOI:10.4028/www.scientific.net/AMR.1148.142

[7]	Experimental Investigation of Mechanical Behavior of a Polyamide before and after Constrained Groove Pressing Process International Journal of Engineering Research in Africa, 2018 DOI:10.4028/www.scientific.net/JERA.36.25

[8]	Simulation Studies and Evolution of Mechanical Properties of AA6061 Subjected to RCS Advanced Materials Research, 2018 DOI:10.4028/www.scientific.net/AMR.1148.142

[9]	Modeling of bake-hardening effect for fine grain bainite-aided dual phase steel Materials & Design, 2017 DOI:10.1016/j.matdes.2017.01.040

[10]	Finite Element Analysis of ECAP, TCAP, RUE and CGP Processes IOP Conference Series: Materials Science and Engineering, 2016 DOI:10.1088/1757-899X/114/1/012007

[11]	The Study of the Behavior of Constrained Groove Pressed Magnesium Alloy after Heat Treatment Acta Physica Polonica A, 2015 DOI:10.12693/APhysPolA.128.775

Follow SCIRP

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Modeling and Numerical Simulation of Material Science

Modeling and Numerical Simulation of Material Science

Journals Menu

Home

About SCIRP

Service

Policies