Effect of Titanium Addition on Behavior of Medium Carbon Steel

Journals Menu

Follow SCIRP

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org

Google-based Impact Factor: 1.55
Citations

Journals Menu

"Effect of Titanium Addition on Behavior of Medium Carbon Steel"
written by Hoda S. El-Faramawy, Saeed N. Ghali, Mamdouh M. Eissa,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.11, 2012

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Influence of Quenching and Partitioning on the Mechanical Properties of Low‐Silicon 33MnCrB5 Boron Steel
	steel research …, 2024

[2]	Effect of heat treatment on microstructure and mechanical properties of Ti-containing low alloy martensitic wear-resistant steel
	China Foundry, 2023

[3]	A review on the current status of Fe–Al based ferritic lightweight steel
	Defence Technology, 2023

[4]	Developed borated austenitic stainless steel alloys as nuclear reactor control rods
	Nuclear Engineering and Design, 2023

[5]	Effects of Ni content and tempering temperatures on microstructure and properties of medium-carbon cast steel
	Journal of Iron and Steel …, 2023

[6]	Review of Titanium Related Inclusions in Casting of Steel
	Archives of Foundry Engineering, 2023

[7]	Defence Technology
	2022

[8]	450 Weld in Microstructural and Mechanical Approaches after Welding at Micro-Jet Cooling. Materials 2022, 15, 7118
	2022

[9]	Effect of Ti Addition on the Wear Resistance of Low Alloy Steel
	Transactions of the Indian Institute of Metals, 2022

[10]	Effect of Ti addition and cast part size on solidification structure and mechanical properties of medium carbon, low alloy cast steel.
	Frattura e Integrita …, 2022

[11]	Hardox 450 Weld in Microstructural and Mechanical Approaches after Welding at Micro-Jet Cooling
	Lasota… - Materials, 2022

[12]	Effect of Ti addition and cast part size on solidification structure and mechanical properties of medium carbon, low alloy cast steel
	2022

[13]	Edge Microstructure and Strength Gradient in Thermally Cut Ti-Alloyed Martensitic Steels. Metals 2021, 11, 1138
	2021

[14]	Edge Microstructure and Strength Gradient in Thermally Cut Ti-Alloyed Martensitic Steels
	Metals, 2021

[15]	Improved strength and ductility balance of medium-carbon steel with chromium and titanium fabricated by friction stir welding process
	2021

[16]	Study on the Dissolution and Precipitation Behavior of Self-Designed (NbTi) C Nanoparticles Addition in 1045 Steel
	2021

[17]	Effects of B and Ti addition and heat treatment temperature on graphitization behavior of Fe-0.55 C-2.3 Si steel
	2020

[18]	Control of Coarse Precipitates of Titanium Nitride in High-Strength Low-Alloy Steel
	2020

[19]	Martensitic wear resistant steels alloyed with titanium
	2020

[20]	Effect of hardenability on microstructure and property of low alloy abrasion-resistant steel
	2020

[21]	Processamento térmico e caracterização de um aço estrutural reforçado com WC e TiC
	2020

[22]	Контроль крупных выделений нитрида титана в высокопрочной низколегированной стали
	2019

[23]	Investigating the Microstructural Evolution and Characterization of Additive Manufactured Zn-Sn-Ti/Ti-6Al-4V Composite.
	2019

[24]	The Impact of Zn and Cu Reinforcements on Microstructural Enhancement and Performance of Laser Cladded Ti-Zn-Cu/Ti-6Al-4V Composite Coatings.
	2019

[25]	A Full Factorial Design-Based Desirability Function Approach for Optimization of Hot Forged Vanadium Micro-alloyed Steel
	Metallography, Microstructure, and Analysis, 2018

[26]	Some Features of the Influence of Titanium and Nitrogen Addition to NiCrMoV Steel
	2018

[27]	Improved the microstructure and mechanical properties of AlFeCoNi high-entropy alloy by carbon addition
	Materials Science and Engineering: A, 2018

[28]	Aceros colados de baja aleación: Estudio del contenido de Titanio sobre la microestructura y propiedades mecánicas
	2017

[29]	Effects of Metallic Coatings on Resistance Spot Weldability of Hot Stamping Steel
	2017

[30]	Microstructure, mechanical and corrosion behaviors of AlCoCuFeNi-(Cr, Ti) high entropy alloys
	Materials & Design, 2017

[31]	Influence of Ti addition on fracture behaviour of HSLA steel using TIG melting technique
	IOP Conference Series: Materials Science and Engineering, 2017

[32]	A study on novel AISI 304 stainless steel matrix composites reinforced with (Nb0.75,Ti0.25)C
	Wear, 2017

[33]	Effect of process parameters on the microstructure, hardness and wear resistance properties of Zn-Sn-Ti coatings on AISI 1015 steel: laser alloying technique
	International Journal of Surface Science and Engineering, 2017

[34]	Hydrogen Induced Cracking and Sulfide Stress Cracking Evaluation of Low Alloy Casing Pipes
	2017

[35]	Hot forging behaviour of medium carbon and microalloyed steel: a comparative study
	International Journal of Microstructure and Materials Properties, 2017

[36]	Austenite grain growth behaviour of HSLA steel during reheating treatment
	2017

[37]	Evaluation of EDTA and GLDA Corrosion on S13Cr-110 Metal Alloy at High Temperature and High Pressure With and Without Salt
	2016

[38]	Effect of nano-sized TiC particle addition on microstructure and mechanical properties of SA-106B carbon steel
	Materials Science and Engineering: A, 2015

[39]	铁素体-珠光体型非调质钢中的微合金化及锻造工艺
	钢铁研究学报, 2013

[40]	Enhancing the Impact-Abrasive Wear Resistance of High-C Martensitic Steel: The Role of C Content and Tempering Temperature


[41]	Strong and Ductile Lightweight steels for Sustainable future in structural applications


[42]	ВПЛИВ МІКРОЛЕГУВАННЯ ТИТАНОМ, АЛЮМІНІЄМ ТА АЗОТОМ ВУГЛЕЦЕВОЇ СТАЛІ НА ОСОБЛИВОСТІ СТРУКТУРИ ТА МЕХАНІЧНІ ВЛАСТИВОСТІ

[1]	The Effect of Titanium Microalloying on the Structure Formation and Mechanical Properties of Steels METALLOFIZIKA I NOVEISHIE TEKHNOLOGII, 2024 DOI:10.15407/mfint.46.11.1085

[2]	Effect of heat treatment on microstructure and mechanical properties of Ti-containing low alloy martensitic wear-resistant steel China Foundry, 2023 DOI:10.1007/s41230-023-3023-4

[3]	Effect of microalloying of carbon steel with titanium, aluminum and nitrogen on structural peculiarities and mechanical properties Fundamental and applied problems of ferrous metallurgy, 2023 DOI:10.52150/2522-9117-2023-37-522-533

[4]	Hardox 450 Weld in Microstructural and Mechanical Approaches after Welding at Micro-Jet Cooling Materials, 2022 DOI:10.3390/ma15207118

[5]	Study on the Dissolution and Precipitation Behavior of Self-Designed (NbTi)C Nanoparticles Addition in 1045 Steel Metals, 2021 DOI:10.3390/met11020184

[6]	Edge Microstructure and Strength Gradient in Thermally Cut Ti-Alloyed Martensitic Steels Metals, 2021 DOI:10.3390/met11071138

[7]	Investigating the Microstructural Evolution and Characterization of Additive Manufactured Zn-Sn-Ti/Ti-6Al-4V Composite. Journal of Physics: Conference Series, 2019 DOI:10.1088/1742-6596/1378/4/042055

[8]	The Impact of Zn and Cu Reinforcements on Microstructural Enhancement and Performance of Laser Cladded Ti-Zn-Cu/Ti-6Al-4V Composite Coatings. Journal of Physics: Conference Series, 2019 DOI:10.1088/1742-6596/1378/4/042041

[9]	Influence of Ti addition on fracture behaviour of HSLA steel using TIG melting technique IOP Conference Series: Materials Science and Engineering, 2017 DOI:10.1088/1757-899X/184/1/012053

Follow SCIRP

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

Journals Menu

Home

About SCIRP

Service

Policies