Modern Mechanical Engineering

Modern Mechanical Engineering

ISSN Print: 2164-0165
ISSN Online: 2164-0181
www.scirp.org/journal/mme
E-mail: mme@scirp.org
"Axial Tensile Testing of Single Fibres"
written by Prasanna Kumar Ilankeeran, Preetamkumar M. Mohite, Sudhir Kamle,
published by Modern Mechanical Engineering, Vol.2 No.4, 2012
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Comparison of the Tensile Strength of Single Natural Fibers
Cellulose, 2024
[2] A Comparative Study on the Tensile Strength of Single Natural Fibers
2024
[3] Moisture Absorption Characteristics and Subsequent Mechanical Properties Loss of Enset-PLA Composites
2023
[4] Numerical and Experimental Investigations of Bladeless Wind Turbine for Green Energy Applications
MSA Engineering Journal, 2023
[5] Optimization of Electrical and Mechanical Properties through the Adjustment of Design Parameters in the Wet Spinning Process of Carbon Nanotube/Polyvinylidene …
Polymers, 2023
[6] A Stretchable and Self-Healing Dual-Functional Wearable Sensor Enabled by Wet-Spun Conductive Thermoplastic Nanocomposite Fibers
Analytica, 2023
[7] Moisture Absorption Characteristics and Subsequent Mechanical Property Loss of Enset–PLA Composites
Journal of Composites …, 2023
[8] Mechanical properties of green composites with hemp/sisal fiber and novolac resin
AIP Conference …, 2023
[9] Degradation behavior of biodegradable man-made fibers in natural soil and in compost
Polymers, 2023
[10] Tetrapodal ZnO-based composite stents for minimally invasive glaucoma surgery
ACS Biomaterials …, 2023
[11] Preparation and interfacial properties of hydroxyl-containing polyimide fibers
Polymers, 2023
[12] Tensile Strength Improvements of Ramie Fiber Threads through Combination of Citric Acid and Sodium Hypophosphite Cross-Linking
Materials, 2023
[13] Experimental Investigations of Carbon Fiber Reinforced Polymer Composites and Their Constituents to Determine Their Elastic Material Properties and …
Fibers and Polymers, 2023
[14] Exploring Interfacial Chemical Adsorption to Prevent Blockages within Multiphase Flow Systems
2022
[15] downloaded from Explore Bristol Research, http://research-information. bristol. ac. uk
2022
[16] Mechanical Characterization of 3D Printed Polylactic Acid (PLA)
2022
[17] A multiscale numerical homogenization-based method for the prediction of elastic properties of components produced with the fused deposition modelling …
Results in Engineering, 2022
[18] Micromechanical Force Measurement of Clotted Blood Particle Cohesion: Understanding Thromboembolic Aggregation Mechanisms
Cardiovascular Engineering and …, 2022
[19] Experimental study of water-sorption and desorption of several varieties of oil palm mesocarp fibers
Results in …, 2022
[20] The analytical and numerical solution of the problem of stretching a system of parallel elements with random strength characteristics taking into account the postcritical …
Meccanica, 2022
[21] Polyamine–Diazirine Conjugates for Use as Primers in UHMWPE–Epoxy Composite Materials
ACS Applied Polymer …, 2022
[22] Exploiting Natural Oil Surfactants to Control Hydrate Aggregation
Energy & …, 2022
[23] TOWARDS ENVIRONMENTALLY SUSTAINABLE, HIGH-PERFORMANCE, LIGHTWEIGHT COMPOSITES FOR AUTOMOTIVE APPLICATIONS
2022
[24] A model for screen utility to predict the future of printed solar cell metallization
2021
[25] Probability of ballistic impact penetration via stochastic multiscale modeling of PMC composite
2021
[26] Designing Hierarchical Honeycombs to Mimic the Mechanical Behaviour of Composites
2021
[27] Recycling of Fiber Polymer Matrix Composites into Cementitious Materials
2021
[28] Recycling of Fiber Polymer Matrix Composites in Cementitious Materials
2021
[29] Elucidation of Features in the Separation of Carbon Nanotubes by Gel Media and a System Model to Describe Those Interactions
2021
[30] Mechanical Properties of Enset Fibers Obtained from Different Breeds of Enset Plant
Conference Paper, 2021
[31] Mechanical reliability of extruded PLA filaments
2021
[32] Weight Sizing, Subsystems & HUMS Design of a Novel Synchropter Concept for the Aerial-Recovery of Falling Rocket Stages
Technical Report, 2021
[33] Estudo do comportamento à tração de betão armado com fios de carbono
2021
[34] Study on Mechanical Properties of Fiber-Cement Stabilized Soil Produced by Using Agricultural By-Products
2021
[35] Caracterización de fibras de aphandra natalia para refuerzo de morteros cementicios de edificación
2021
[36] Extraction, variability, enzymatic biosoftening and evaluation of physico-mechanical properties of Agave americana L. Fibre
2020
[37] Uncertainty in fibre strength characterisation due to uncertainty in measurement and sampling randomness
Applied Composite Materials, 2020
[38] Processing and Characterization of Nanocellulose Composites: The Leap from Poly (lactic acid) to Polyamide 6
2020
[39] Comparison of Mechanical Performance and Life Cycle Cost of Natural and Synthetic Fiber-Reinforced Cementitious Composites
2020
[40] Control of Cracking in Textile Reinforced Concrete with Unresin Carbon Fibers
2020
[41] Effect of chemical treatment and fumed silica coating on tensile and thermogravimetric properties of jute yarn
2020
[42] Tensile properties of mineral fibers determined with Sentmanat extensional rheometer
2020
[43] Probabilistic single fibre characterisation to improve stochastic strength modelling of unidirectional composites
2020
[44] A proposal to modify the Kelly-Tyson equation to calculate the interfacial shear strength (IFSS) of composites with low aspect ratio fibers
2020
[45] Weibull statistical analysis and experimental investigation of size effects on tensile behavior of dry unidirectional carbon fiber sheets
2020
[46] Up-cycling of agave tequilana bagasse-fibres: A study on the effect of fibre-surface treatments on interfacial bonding and mechanical properties
2020
[47] EFFECT OF ALKALI TREATMENT ON THE TENSILE PROPERTIES OF GRAPE CANE FIBERS BY INTEGRATING DIGITAL IMAGE CORRELATION METHOD
2020
[48] Pengaruh prosentase larutan NaOH pada proses alkalisasi serat kulit pohon waru (hibiscus tiliaceus) sebagai reinforcement komposit terhadap kekuatan tarik …
Turbo J. Progr …, 2019
[49] Surfactant Adsorption to Cyclopentane Hydrate Interfaces
2019
[50] Integrative design methodologies for lightweight carbon fiber furniture design
Interaction - HUMAN-COMPUTER, 2019
[51] Viability Study for a Carbon-Cork Sandwich Composite
2019
[52] Use of Fibre Reinforcement in Soil for Sustainable Solution of Infrastructure
Innovative Research in Transportation Infrastructure, 2019
[53] Experimental study on the effects of surface treatment reagents on tensile properties of Banana fiber reinforced polyester composites
2019
[54] Physical and Mechanical Characterization of Several Varieties of Oil Palm Mesocarp Fibers Using Different Cross-Sectional Assumptions
2019
[55] A Multiscale Modelling Approach for Estimating the Effect of Defects in Unidirectional Carbon Fiber Reinforced Polymer Composites
2019
[56] Progressive failure analysis of woven composites considering structural characteristics based on micro-mechanics
2019
[57] Carbon Materials: Science And Applications
2019
[58] Evaluation of critical parameters in tensile strength measurement of single fibres
2019
[59] Estimation of the Effects of the Cross-Head Speed and Temperature on the Mechanical Strength of Kenaf Bast Fibers Using Weibull and Monte-Carlo Statistics
2019
[60] COMPATIBILITY ASSESSMENT FOR PHYSICAL AND MECHANICAL PROPERTIES OF EMPTY FRUIT BUNCH CEMENT-BONDED FIBREBOARD
2018
[61] Corrigendum: Dry-spinning of cellulose nanocrystal/polylactic acid composite fibers
2018
[62] Quantitative Ranking and Development of Hydrate Anti-Agglomerants
2018
[63] Dry-spinning of cellulose nanocrystal/polylactic acid composite fibers
2018
[64] Electroless Ni-P metallization on palladium activated polyacrylonitrile (PAN) fiber by using a drying process
Materials Chemistry and Physics, 2018
[65] RANCANG BANGUN ALAT UJI TARIK SERAT ALAM UNTUK MENDUKUNG INDUSTRI NASIONAL
2018
[66] Compósitos cimentícios armados com fios de carbono: avaliação experimental da armadura mínima de tração
2018
[67] The effects of processing on performance and utility in plant fibre-based composites
2018
[68] DEANSHIP OF GRADUATE STUDIES
2018
[69] Rancang Bangun Alat Uji Tarik Serat Aalami untuk Mendukung Industri Nasional
Jurnal Teknik Mesin, 2018
[70] Effect of surface treatment and recycling on the mechanical properties of e-glass
2017
[71] Physical Properties of E-glass Fiber According to Fiberizing Temperature
2017
[72] Feasibility study of a novel bio-based material through a design thinking approach.
2017
[73] Reduced order multiscale modeling of fiber reinforced polymer composites including plasticity and damage
Mechanics of Materials, 2017
[74] INFLUENCE OF RECYCLING PROCESS ON THE TENSILE PROPERTY OF CARBON FIBER
21st International Conference on Composite Materials, 2017
[75] Enhancing the interfacial strength of glass/epoxy composites using ZnO nanowires
Composite Interfaces, 2017
[76] Synthesis and Characterization of Highly Elastic TiCu-Based Amorphous Micro-Wires
Materials transactions, 2017
[77] Evaluation of Tensile Properties of Natural Silk and Coir Fibers
Innovative Design and Development Practices in Aerospace and Automotive Engineering, 2017
[78] 섬유화 온도 변화에 따른 E-glass fiber 의 물리적 특성
2017
[79] Reduction of Clathrate Hydrate Film Growth Rate by Naturally Occurring Surface Active Components
Energy & Fuels, 2017
[80] Characterization of tensile and compressive properties of single fiber filament of toho hts 40 carbon fiber
2017
[81] CONCEPTUAL FRAMWORK OF SCREW PINE LEAVES BIOCOMPOSITE FOR FURNITURE COMPONENT
2016
[82] TO OPTIMIZE THE COST OF SEAT STRUCTURE BY ANALYZING THE ACCURACY OF MECHANICAL PROPERTIES BETWEEN FEA ANALYSIS AND …
2016
[83] Manufacturing and Analysis of Bioactiva Glass Fiber, and its Application in Biomedical Engineering
2016
[84] Damage mechanisms in short glass fibre reinforced thermoplastic during in situ microtomography tensile tests
Composites Part B: Engineering, 2016
[85] Review on Development of Glass Fiber/Epoxy Composite Material and its Characterizations
International Journal of Science, Engineering and Technology Research (IJSETR), 2016
[86] TO OPTIMIZE THE COST OF SEAT STRUCTURE BY ANALYZING THE ACCURACY OF MECHANICAL PROPERTIES BETWEEN FEA ANALYSIS AND …
International Research Journal of Engineering and Technology, 2016
[87] Grafen oksit lif eğirme cihazı tasarımı
2016
[88] Determination of Optical Fiber Strain in Multi-tube Cable by Finite Element Analysis and its Experimental Validation
2015
[89] Preparation of carbon fiber from water hyacinth liquid tar
International Journal of Industrial Chemistry, 2015
[90] The effectiveness of combined gripping method in tensile testing of UHMWPE single yarn
IOP Conference Series: Materials Science and Engineering, 2015
[91] Micromechanical Cohesive Force Measurements Between Precipitated Asphaltene Solids and Cyclopentane Hydrates
Energy & Fuels, 2015
[92] "A Statistical Analysis of Effects of Test Methods on Spun Carbon Nanotube Yarn "
2015
[93] Statistical Analysis of Effects of Test Methods on Spun Carbon Nanotube Yarn
2015
[94] г. Москва При статическом растяжении современных высокопрочных волокон наблюдается зависимость модуля упругости от базы измерения. Авторы …
2014
[95] VALUE-ADDED LIGNIN BASED CARBON FIBER FROM ORGANOSOLV FRACTIONATION OF POPLAR AND SWITCHGRASS
2014
[96] Carbon Nanotube-reinforced Hybrid Composites Enabled by the PopTube Approach
2014
[97] Longitudinal shear modulus of single aramid, carbon and glass fibres by torsion pendulum tests
International Journal of Mechanical and Mechatronics Engineering, 2014
[98] ESCOLA POLITÉCNICA DA UNIVERSIDADE DE SÃO PAULO
Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top