|
[1]
|
Contribution to the formability improvement in sheet metal stamping by a novel technique to control press kinetics
Mechanics & Industry,
2024
DOI:10.1051/meca/2024015
|
|
|
|
|
[2]
|
Al 1050 Sac Metal Malzemenin Çekilebilirliğinin İncelenmesi
Politeknik Dergisi,
2023
DOI:10.2339/politeknik.1206641
|
|
|
|
|
[3]
|
Contribution to a new method for deep drawing with kinetic control
MATEC Web of Conferences,
2022
DOI:10.1051/matecconf/202236801022
|
|
|
|
|
[4]
|
Al 1050 Sac Metal Malzemenin Çekilebilirliğinin İncelenmesi
Journal of Polytechnic,
2022
DOI:10.2339/politeknik.1206641
|
|
|
|
|
[5]
|
The effect of substrate material properties on the failure behaviour of coatings in the Erichsen cupping test
Progress in Organic Coatings,
2021
DOI:10.1016/j.porgcoat.2020.106087
|
|
|
|
|
[6]
|
Investigation of Portevin-Le Châtelier effect during Erichsen test
International Journal of Material Forming,
2019
DOI:10.1007/s12289-019-01511-5
|
|
|
|
|
[7]
|
Extended evaluation of Erichsen cupping test results by means of laser speckle
Archives of Civil and Mechanical Engineering,
2016
DOI:10.1016/j.acme.2015.10.007
|
|
|
|
|
[8]
|
The revised Appreciation of the Liberal Arts Scale (ALAS-R): Development, reliability and validity
International Journal of Research Studies in Education,
2013
DOI:10.5861/ijrse.2013.416
|
|
|
|
|
[9]
|
Effect of Lubrication on the Erichsen Test
Applied Mechanics and Materials,
2013
DOI:10.4028/www.scientific.net/AMM.365-366.425
|
|
|
|
|
[10]
|
AA5083 Aluminium Alloy Constants Identification through Inverse Analysis of the Erichsen Test
Applied Mechanics and Materials,
2012
DOI:10.4028/www.scientific.net/AMM.271-272.208
|
|
|
|
|
[11]
|
Influence of the Metal Sheet Parameters on the Results of the Erichsen Test
Applied Mechanics and Materials,
2012
DOI:10.4028/www.scientific.net/AMM.217-219.2444
|
|
|
|