Materials Sciences and Applications

Materials Sciences and Applications

ISSN Print: 2153-117X
ISSN Online: 2153-1188
www.scirp.org/journal/msa
E-mail: msa@scirp.org
"A Study on Wear Resistance, Hardness and Impact Behaviour of Carburized Fe-Based Powder Metallurgy Parts for Automotive Applications"
written by Ali Emamian,
published by Materials Sciences and Applications, Vol.3 No.8, 2012
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Influence of material and process parameters on reduction-swelling characteristics of sintered iron pellets
Metals, 2023
[2] An Experimental Study of the Influence of Carburizing Treatment Holding Time on the Structure and Hardness of 16NC6 Steel
Engineering, Technology & Applied …, 2023
[3] Effective Case Depth and Wear Resistance of Pack Carburized SCM 420 Steel Processed Using Different Concentrations of Natural Shell Waste Powders and …
Crystals, 2022
[4] Effect of heat treatment on hardness and toughness of EN8 steel
Materials Today: Proceedings, 2021
[5] Wear and mechanical properties of carburized AISI 8620 steel produced by powder metallurgy
2021
[6] The investigation of wear and mechanical properties of carburized AISI 8620 steel by powder metallurgy
2020
[7] The Improvement of Wear Characteristics on 316L Stainless Steel by Dual Surface Treatment Method
2020
[8] Effect of Nitriding-Quenching and Carburizing-Quenching Processes on the Wear Resistance of the Sintered Pure Iron
2020
[9] ШВИДКІСНЕ ТЕРМОЦИКЛІЧНЕ АЗОТУВАННЯ ЦЕМЕНТОВАНИХ СТАЛЕЙ
2020
[10] СТВОРЕННЯ МЕТАСТАБІЛЬНИХ СТАНІВ ТА ЗМІЦНЕННЯ КОНСТРУКЦІЙНИХ СТАЛЕЙ СПОСОБАМИ ТЕРМІЧНОЇ ТА ХІМІКО-ТЕРМІЧНОЇ ОБРОБКИ
2019
[11] A REVIEW ON EFFECT OF HEAT TREATMENT ON MECHANICAL PROPERTIES OF VARIOUS STEELS
2019
[12] Characterization of Apatite Glass-Ceramic Coatings on Ti-6Al-4V Substrate by Sol-Gel Method for Medical Application
2019
[13] مشخصه‌یابی پوشش‌های شیشه-سرامیک آپاتیت بر سطح زیرلایه فلزی آلیاژ Ti-6Al-4V به روش سل-ژل جهت کاربردهای پزشکی‎
2019
[14] Effects of Nitriding-Quenching and Carburizing-Quenching on Wear Properties of Industrial Pure Iron
2018
[15] Modeling and Analysis of Effective Case Depth on Meshing Strength of Internal Gear Transmissions
2018
[16] Зв'язок зносостійкості, шорсткості поверхні і параметрів гарту цементованних конструкційних сталей
2017
[17] Influence of the Pore Characteristics on Mechanical Properties and Abrasive Wear of Sintered Iron-Based Alloys Subjected to a Thermochemical Treatment.
Advanced Materials Research, 2017
[18] Связь износостойкости, шероховатости поверхности и параметров закалки цементованных конструкционных сталей
2017
[19] Influence of the Pore Characteristics on Mechanical Properties and Abrasive Wear of Sintered Iron-Based Alloys Subjected to a Thermochemical Treatment
2017
[20] Numerical estimating the shock strength of automobile clutch disc hub
6th International Conference on …, 2017
[21] Wear Resistance of Industrial Pure Iron Treated by Nitriding and Quenching Followed by Aging Process
Materials transactions, 2016
[22] Investigating grinding media differences in microstructure, hardness, abrasion and fracture toughness
Minerals Engineering, 2016
[23] Applications of Taguchi Design Method to Study Wear Behavior of Sintered and Hardened AISI 4140 Powder Metallurgy Steel
IJSRD -International Journal for Scientific Research & Development, 2015
[24] Improvement in the Wear Resistance and Mechanical Properties of Carburized Mild Steel by varying Carburization Temperature and constant Tempering …
2015
Free SCIRP Newsletters
Copyright © 2006-2025 Scientific Research Publishing Inc. All Rights Reserved.
Top