Effect of Soaking Time on the Mechanical Properties of Annealed Cold-Drawn Low Carbon Steel

Journals Menu

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Materials Sciences and Applications

ISSN Print: 2153-117X
ISSN Online: 2153-1188
www.scirp.org/journal/msa
E-mail: msa@scirp.org

Google-based Impact Factor: 1.34
Citations

Journals Menu

"Effect of Soaking Time on the Mechanical Properties of Annealed Cold-Drawn Low Carbon Steel"
written by Nurudeen Adekunle Raji, Oluleke Olugbemiga Oluwole,
published by Materials Sciences and Applications, Vol.3 No.8, 2012

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Investigation of post weld heat treatment on mechanical properties of low frequency vibration assisted SMAW mild steel welded joints
	International Journal on …, 2024

[2]	Effect of Heat Treatment Soaking Time on Mechanical Properties of 15CDV6 Steel
	NanoWorld J, 2023

[3]	Développement de méthodes de caractérisation fine des propriétés élastoplastiques des fils métalliques
	2023

[4]	Effect of Process Annealing Temperature on Some Tensile Properties and Microstructure of Cold Rolled 1010 Steel
	مجلة البحوث الأكاديمية, 2022

[5]	The Optimization of Spheroidizing Heat Treatment Parameters on SCM440 Alloy Steel Wires Using Taguchi Robust Design
	European Journal of Applied …, 2022

[6]	Optimization of wear performance and COF of AISI 1040 steel using grey relational analysis
	Materials Today: Proceedings, 2022

[7]	Effect of Process Annealing Temperature on Some Tensile Properties and Microstructure of Cold Rolled 1010 Steel.
	Journal of Academic Research (Applied Sciences), 2022

[8]	Recrystallization Annealing Soaking Time Effect on the Tribological Behavior of Cold Upsetted Low Carbon Steel
	Materials Research, 2022

[9]	Investigation of the mechanical properties of annealing heat treated low carbon steel
	Algerian Journal of …, 2022

[10]	The study of diffusion annealing procedure on the chemical behaviour of mild steel
	AIP Conference …, 2022

[11]	Experimentally Determination of Burst Pressure and Failure Location of Liquefied Petroleum Gas Cylinder
	2021

[12]	Mechanical and Structural Responses of Low Carbon Steel to Cold Rolling and Stress Relief Anneal Treatments
	2020

[13]	Prediction of Mechanical Properties for High Strength Low Alloyed Steels in a Commercial Hot Dip Galvanizing Line without Soaking Section
	2020

[14]	Development of a novel Fast-Warm stamping (FWS) technology for manufacturing high-strength steel components
	2020

[15]	Distinctiveness of Welding Joints Design Based on Mechanical and Corrosion Environmental Influence on Low Carbon Steel
	2019

[16]	Investigation on the effect of cold drawing process on mechanical properties and structure of seamless steel (Ck60) tube
	2019

[17]	The consequences of eliminating the soaking section of a commercial hot-dip galvanising line for HSLA production and a control strategy for improving product …
	2019

[18]	Performance Evaluation of the Effects of Post Weld Heat Treatment on the Microstructure, Mechanical and Corrosion Potentials of Low Carbon Steel
	ADVANCED TECHNOLOGIES AND MATERIALS, 2019

[19]	An investigation study using mixture proportion of polyethylene glycol-water as quenching medium and their effects on low carbon steel heat treatment process.
	International Journal of Energy & Environment, 2018

[20]	Optimasi Proses Annealing pada Proses Fine Drawing Untu Kmemperbaiki Sifat Mekanis Produk Kawat Tembaga
	2018

[21]	Effect of Heat Exposure Time on Tensile Properties in Cold Rolled Steel
	2018

[22]	Experiment on Effect of heat treatment on mechanical and microstructure properties of AISI steel
	Materials Today: Proceedings, 2018

[23]	An investigation study using mixture proportion of polyethylene glycol-water as quenching medium and their effects on low carbon steel heat treatment process
	2018

[24]	The Influence of the Deformation Degree on the Mechanical Properties and Microstructures of the Blanks Obtained by Tube and Wire Drawing
	2017

[25]	The Influence of the Deformation Degree on the Mechanical Properties and Microstructures of the Blanks Obtained by Tube and Wire Drawing.
	Advanced Materials Research, 2017

[26]	Hardness and flexural properties of heat treated SKD61 medium carbon steel
	2016

[27]	Microstructure analysis of steel SA516Gr70 due to tensile strain and creep
	2016

[28]	Role of Eddy Current Non-Destructive Testing in the Fitness-For-Purpose Assessment of Steel Components
	2016

[29]	EXPERIMENTAL RESEARCH ON THE INFLUENCE OF COLD ROLLING PARAMETERS ON THE MECHANICAL PROPERTIES OF STEEL FOR DEEP …
	2015

[30]	Experimental research on the influence of cold rolling parameters on the mechanical properties of steel for deep drawing
	2015

[31]	Literature review on the effect of processing on the mechanical and metallurgical properties of low carbon steels
	2015

[32]	Optimasi Proses Annealing pada Proses Fine Drawing untuk Memperbaiki Sifat Mekanis Produk Kawat Tembaga
	2015

[33]	Study and development of empirical relations among various physical parameters of LPG cylinder material and suggest fail safe inspection plan for manufacturing
	2015

[34]	An Assessment of the Microstructure and Mechanical Properties of 0.26% Low Carbon Steel under Different Cooling Media: Analysis by one-way ANOVA
	Industrial Engineering Letters, 2014

[35]	EXPERIMENTAL RESEARCH CONCERNING THE INFLUENCE OF THE COLD ROLLING PARAMETERS ON MECHANICAL PROPERTIES OF STEEL FOR DEEP DRAWING
	THE ANNALS OF “DUN?REA DE JOS” UNIVERSITY OF GALA?I FASCICLE V, TECHNOLOGIES IN MACHINE BUILDING, 2014

[36]	STUDY ON LPG CYLI
	Int J Adv Engg Tech/IV/III/July-Sept, 2013

[37]	Optimization of the Annealing Parameters for Improved Tensile Properties in Cold Drawn 0.12 wt% C Steel
	Engineering, 2013

[38]	COMPARATIVE ANALYSIS OF LPG CYLINDER HARDNESS VALUES OBTAINED FROM BRINELL HARDNESS TEST AND PORTABLE HARDNESS TESTER
	Int J Adv Engg Tech/IV/III/July-Sept, 2013

[39]	Arid Zone Journal of Engineering, Technology and Environment Journal/Arid Zone Journal of Engineering, Technology and Environment/Vol. 16 No. 1 (2020)/Articles …


[40]	PARAMETERS CONTROL FOR RE-AUTOFRETTAGE OF THICK WALLED HYDRAULIC CYLINDERS FOR HEAVY ENGINEERING APPLICATIONS


[41]	EXPERIMENTAL RESEARCH CONCERNING THE INFLUENCE OF THE COLD ROLLING PARAMETERS ON MECHANICAL PROPERTIES OF STEEL …

[1]	The study of diffusion annealing procedure on the chemical behaviour of mild steel TECHNOLOGIES AND MATERIALS FOR RENEWABLE ENERGY, ENVIRONMENT AND SUSTAINABILITY: TMREES21Gr, 2022 DOI:10.1063/5.0092506

[2]	Prediction of Mechanical Properties for High Strength Low Alloyed Steels in a Commercial Hot Dip Galvanizing Line without Soaking Section Metals, 2020 DOI:10.3390/met10050561

[3]	Investigation on the effect of cold drawing process on mechanical properties and structure of seamless steel (Ck60) tube Journal of Applied Science, Engineering, Technology, and Education, 2019 DOI:10.35877/454RI.asci1193

[4]	Investigation on the Effect of Cold Drawing Process on Mechanical Properties and Structure of Seamless Steel (Ck60) Tube SSRN Electronic Journal , 2019 DOI:10.2139/ssrn.3353593

[5]	Distinctiveness of Welding Joints Design Based on Mechanical and Corrosion Environmental Influence on Low Carbon Steel Advanced Technologies & Materials, 2019 DOI:10.24867/ATM-2019-2-003

[6]	The Influence of the Deformation Degree on the Mechanical Properties and Microstructures of the Blanks Obtained by Tube and Wire Drawing Advanced Materials Research, 2017 DOI:10.4028/www.scientific.net/AMR.1143.85

[7]	Investigation on the Effect of Cold Drawing Process on Mechanical Properties and Structure of Seamless Steel (Ck60) Tube SSRN Electronic Journal , 2016 DOI:10.2139/ssrn.4016905

[8]	Optimization of the Annealing Parameters for Improved Tensile Properties in Cold Drawn 0.12 wt% C Steel Engineering, 2013 DOI:10.4236/eng.2013.511106

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Materials Sciences and Applications

Materials Sciences and Applications

Journals Menu

Home

About SCIRP

Service

Policies