|
[1]
|
Effect of hardness, impact strength and microstructure of steel VCN 150 by hardening and tempering
INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND EMERGING TECHNOLOGIES (ICOMEET2023),
2025
DOI:10.1063/5.0243153
|
|
|
|
|
[2]
|
Reference Module in Materials Science and Materials Engineering
2024
DOI:10.1016/B978-0-323-96020-5.00249-1
|
|
|
|
|
[3]
|
Comprehensive Materials Processing
2024
DOI:10.1016/B978-0-323-96020-5.00249-1
|
|
|
|
|
[4]
|
Comprehensive Materials Processing
2024
DOI:10.1016/B978-0-323-96020-5.00249-1
|
|
|
|
|
[5]
|
Hardness and Toughness Investigation of ASSAB 705 Steel by Various Tempering Temperatures
Key Engineering Materials,
2023
DOI:10.4028/p-qhlFk6
|
|
|
|
|
[6]
|
Hardness and Toughness Investigation of ASSAB 705 Steel by Various Tempering Temperatures
Key Engineering Materials,
2023
DOI:10.4028/p-qhlFk6
|
|
|
|
|
[7]
|
Effect of Multiple Thermal Cycles on the Microstructure and Mechanical Properties of AISI 1045 Weldments
ACS Omega,
2022
DOI:10.1021/acsomega.2c05249
|
|
|
|
|
[8]
|
Effect of Oil Quenching and Shot Peening to Improve Hardness Behavior of S45C Carbon Steel
Materials Science Forum,
2022
DOI:10.4028/p-dt2v5c
|
|
|
|
|
[9]
|
Effect of Microstructure on Electrochemical Properties of the EN S275 Mild Steel under Chlorine-Rich and Chlorine-Free Media at Different pHs
Metals,
2022
DOI:10.3390/met12081386
|
|
|
|
|
[10]
|
Effect of Multiple Thermal Cycles on the Microstructure and Mechanical Properties of AISI 1045 Weldments
ACS Omega,
2022
DOI:10.1021/acsomega.2c05249
|
|
|
|
|
[11]
|
Effect of the Heat-Treatment Process on the Mechanical and Microstructure Properties of EN8 Steel
International Journal of Surface Engineering and Interdisciplinary Materials Science,
2022
DOI:10.4018/IJSEIMS.313628
|
|
|
|
|
[12]
|
Micro-hardness variation of micro-phases during spheroidisation of AISI4340 steel
Cogent Engineering,
2021
DOI:10.1080/23311916.2021.1875536
|
|
|
|
|
[13]
|
Heat Treatment Effect on the Microstructural, Hardness and Tribological Behavior of A105 Medium Carbon Steel
Defect and Diffusion Forum,
2021
DOI:10.4028/www.scientific.net/DDF.406.419
|
|
|
|
|
[14]
|
Effect of heat treatment processes on the mechanical properties of AISI 1045 steel
Materials Today: Proceedings,
2021
DOI:10.1016/j.matpr.2021.01.590
|
|
|
|
|
[15]
|
Micro-hardness variation of micro-phases during spheroidisation of AISI4340 steel
Cogent Engineering,
2021
DOI:10.1080/23311916.2021.1875536
|
|
|
|
|
[16]
|
Effect of heat treatment processes on the mechanical properties of AISI 1045 steel
Materials Today: Proceedings,
2021
DOI:10.1016/j.matpr.2021.01.590
|
|
|
|
|
[17]
|
Design and building of an automated heat-treatment system for industrial applications
Alexandria Engineering Journal,
2020
DOI:10.1016/j.aej.2020.09.023
|
|
|
|
|
[18]
|
A short review on different metal alloys on rapid cooling process
IOP Conference Series: Materials Science and Engineering,
2020
DOI:10.1088/1757-899X/736/5/052034
|
|
|
|
|
[19]
|
Finite Element Modeling of a Thin Circular Disc Manufactured by Forming Process used in Cyclic Loading and Unloading Applications
Materials Today: Proceedings,
2020
DOI:10.1016/j.matpr.2020.03.434
|
|
|
|
|
[20]
|
Influence of Oak Tree Ash onthe Microstructure and Mechanical Properties of Medium Carbon Steel
2020 6th International Engineering Conference “Sustainable Technology and Development" (IEC),
2020
DOI:10.1109/IEC49899.2020.9122924
|
|
|
|
|
[21]
|
Intercritical and subcritical spheroidization of 10B38 cold heading steel
Materials Research Express,
2019
DOI:10.1088/2053-1591/ab2961
|
|
|
|
|
[22]
|
Effect of Heat Treatment Parameters on Mechanical Properties of Medium Carbon Steel
Mechanics and Mechanical Engineering,
2018
DOI:10.2478/mme-2018-0071
|
|
|
|
|
[23]
|
Study on Effect of Post Processing on Direct Metal LASER Sintered 420 Stainless steel Infiltrated with Bronze
Materials Today: Proceedings,
2018
DOI:10.1016/j.matpr.2018.10.244
|
|
|
|
|
[24]
|
Analysis of AISI material power of AISI 4140 bucket teeth excavator using influence of abrasive wear
2018
DOI:10.1063/1.5042942
|
|
|
|
|
[25]
|
Effects of Quenchants on Impact Strength of Single-Vee Butt Welded Joint of Mild Steel
IOP Conference Series: Materials Science and Engineering,
2018
DOI:10.1088/1757-899X/391/1/012007
|
|
|
|
|
[26]
|
Experimental Study on Heat Treatment of SS420 and EN24 Using Nano Particulate Quenching Process
International Journal of Nanoscience,
2018
DOI:10.1142/S0219581X18500400
|
|
|
|
|
[27]
|
Rapid Cyclic Heating of Mild Steel and its Effects on Microstructure and Mechanical properties
IOP Conference Series: Materials Science and Engineering,
2018
DOI:10.1088/1757-899X/413/1/012016
|
|
|
|
|
[28]
|
Optimization of Chemical Composition for Pressure Vessel Steel Grade P460NL2 - Industrial Trial Research
Advanced Materials Research,
2017
DOI:10.4028/www.scientific.net/AMR.1143.45
|
|
|
|
|
[29]
|
An Experimental Investigation on Hardness and Microstructure of Heat Treated EN 9 Steel
IOP Conference Series: Materials Science and Engineering,
2017
DOI:10.1088/1757-899X/225/1/012055
|
|
|
|
|
[30]
|
Investigation of Influence of Quenching and Annealing on the Plane Fracture Toughness and Brittle to Ductile Transition Temperature of the Zinc Coated Structural Steel Materials
International Journal of Surface Engineering and Interdisciplinary Materials Science,
2017
DOI:10.4018/IJSEIMS.2017070103
|
|
|
|
|
[31]
|
Designing spring load system for mechatronic actuator
2016 10th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG),
2016
DOI:10.1109/CPE.2016.7544199
|
|
|
|
|
[32]
|
Fatigue of Materials III
2014
DOI:10.1007/978-3-319-48240-8_15
|
|
|
|
|
[33]
|
Fatigue of Materials III Advances and Emergences in Understanding
2014
DOI:10.1002/9781119041498.ch15
|
|
|
|
|
[34]
|
Investigation on the Mechanical Properties of SA 210C Tubular Joints
Procedia Engineering,
2014
DOI:10.1016/j.proeng.2013.11.023
|
|
|
|
|
[35]
|
Study of Hydrogen Permeation in a Micro-Alloyed Heat Treated Steel
Defect and Diffusion Forum,
2014
DOI:10.4028/www.scientific.net/DDF.353.165
|
|
|
|
|
[36]
|
The Effects of Heat Treatment on Microstructure and Mechanical Properties of AISI 4140 for Base Cutter Cane Harvester
Advanced Materials Research,
2013
DOI:10.4028/www.scientific.net/AMR.774-776.1059
|
|
|
|
|
[37]
|
Effect of Heat Treatments on Corrosion of Welded Low-Carbon Steel in Acid and Salt Environments
Journal of Minerals and Materials Characterization and Engineering,
2013
DOI:10.4236/jmmce.2013.13018
|
|
|
|
|
[38]
|
Effect of Titanium Addition on Behavior of Medium Carbon Steel
Journal of Minerals and Materials Characterization and Engineering,
2012
DOI:10.4236/jmmce.2012.1111118
|
|
|
|