Development of Aluminium Based Hybrid Metal Matrix Composites for Heavy Duty Applications

Journals Menu

Follow SCIRP

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org

Google-based Impact Factor: 1.55
Citations

Journals Menu

"Development of Aluminium Based Hybrid Metal Matrix Composites for Heavy Duty Applications"
written by M. Asif, K. Chandra, P.S. Misra,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.14, 2011

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Correlative evaluation of the corrosion resilience and passivation properties of zinc and aluminum alloys in neutral chloride and acid-chloride solutions
	Open Engineering, 2024

[2]	Mechanical Properties and Microstructure Analysis of Al-6061 Metal Matrix Prepared with Alumina and Silicon Carbide Powders
	Journal of The Institution of Engineers …, 2024

[3]	A comprehensive review study on aluminium based hybrid composites with organic and inorganic reinforcements
	Sādhanā, 2023

[4]	Optimization of process parameters for wire electrical discharge machining of aluminium based metal matrix composite by Taguchi's approach
	Materials Today: Proceedings, 2023

[5]	Aluminum-foam by powder metallurgy: A review
	Materials Today …, 2023

[6]	Evaluating the Mechanical Integrity of Multi-Pass Friction Stir Processed Aluminium Alloy Impregnated with Titanium Particles
	… Conference on Science …, 2023

[7]	Mechanical Properties of Low-Cost Aluminum-Matrix Hybrid Composites Reinforced With Industrial Waste Quarry Dust
	Metal Science and Heat …, 2023

[8]	Al 6063 Hybrid Metal Matrix Reinforced Composites with TiC Nanoparticles and NEEM Leaf Ash Using Stir Casting Method for Bicycle Frame
	… Conference on Future …, 2022

[9]	Механические свойства экономичного гибридного композита с алюминиевой матрицей, армированного карьерной пылью из промышленных отходов
	… и термическая обработка …, 2022

[10]	Microwave Sintering of Aluminum Composite
	… Conference on Future …, 2022

[11]	Tribological behaviour of Al-2024/TiC metal matrix composites
	Becerril, J Garcia-Guerra, VH Lopez-Morelos… - Coatings, 2022

[12]	Preparation and characterization of Al-TiO2-Mg composites through powder metallurgy
	Materials Today …, 2022

[13]	Effect of Silicon on the Properties of Sintered Alloys of (Al–Si)–Sn System
	Inorganic Materials: Applied Research, 2022

[14]	Dry Sliding Wear Studies on Sillimanite and B4C Reinforced Aluminium Hybrid Composites Fabricated by Vacuum Assisted Stir Casting Process
	Materials, 2022

[15]	Investigations on machinability characteristics of Cast Aluminum Alloy based (LM 26+ Graphite+ Fly ash) Hybrid metal Matrix Composites for automobile components
	Materials and …, 2022

[16]	Evaluation of Microstructures, Mechanical and Dry-Sliding Wear Performance of A356-(Fly Ash/SiCp) Hybrid Composites
	International Journal of …, 2022

[17]	The Role of Tetra Hybrid Reinforcements on the Behavior of Aluminum Metal Matrix Composites.
	Journal of …, 2022

[18]	Investigation of mechanical properties of SiC-reinforced seamless aluminium pipes fabricated using powder metallurgy followed by hot extrusion
	International Journal of Materials Research, 2022

[19]	Effect of particle size and weight fraction of SiC on the mechanical, tribological, morphological, and structural properties of Al-5.6 Zn-2.2 Mg-1.3 Cu composites …
	Heliyon, 2022

[20]	MECHANICAL AND WEAR CHARACTERIZATION OF ALUMINA/B4C/SiC REINFORCED Al-6061 ALLOY METAL COMPOSITES
	… An International Journal, 2022

[21]	The Mechanical properties and tribological behavior of Ni coated carbon fibers reinforced with Al 7075 metal matrix composites
	Materials Today: Proceedings, 2022

[22]	On this page
	Journal of Nanomaterials, 2022

[23]	Special Features of Structure Formation in a Composite Due to Sintering a Mixture of Elementary Powders of Al, Fe and Sn
	Metal Science and Heat Treatment, 2022

[24]	Aircraft Brake Pad Reconstruction and Fabrication
	Global Congress on …, 2022

[25]	Development of predictive models for wire electrical discharge machining of aluminium metal matrix composites by using regression analysis and neural network
	Materials Today …, 2022

[26]	An Insight into Mechanical and Metallurgical Behavior of Hybrid Reinforced Aluminum Metal Matrix Composite
	Advances in Materials …, 2022

[27]	Mechanical Investigation of Heat-Treated Al-Alloy Reinforced with Antimony
	SSRN Electronic Journal, 2021

[28]	Evaluation of mechanical and tribological properties of AL7075 hybrid metal matrix composite reinforced with fly ash and graphite
	Materials Today: Proceedings, 2021

[29]	Development of Car Piston Material from Aluminium alloy using Coconut shell ash as an additive
	2021

[30]	Corrosion resistance and passivation behavior of 3004 AlMnMg and 4044AlSi aluminum alloys in acid-chloride electrolytes
	Materials Research Express, 2021

[31]	Review on Powder Metallurgy: A Novel Technique for Recycling and Foaming of Aluminium-Based Materials
	Powder Metallurgy and Metal Ceramics, 2021

[32]	A re-investigation of mechanical properties of aluminium-based surface composites prepared by friction stir processing
	2021

[33]	Study of tribological properties on aluminium based hybrid composite developed through microwave energy
	2021

[34]	Morphology and Mechanical Properties of Al-TiC Nanocomposite Processed via Ball Milling Technique
	2021

[35]	Relationship between Wear Resistance under Dry Friction and Mechanical Properties of Sintered Al–Sn Composites
	2021

[36]	Mechanical and Tribological Properties of Al 6061 Alloy Reinforced with Gr-WC Particulates Using Powder Metallurgy Technique
	2021

[37]	Mechanical behaviour and tribological properties of cenosphere-copper composites using design of experiments
	2021

[38]	Mechanical Behaviour of E-Glass and Aluminium Hybrid Composite
	2021

[39]	Application of Taguchi-Based Grey System for Multi Aspects Optimization on Wire Electric Discharge Machining of Aluminum-Graphene Nanoplatelets Composites
	… International Journal of …, 2021

[40]	Влияние типа наполнителя на триботехнические свойства спечённого композита Al-20Sn
	… конференции, 27–29 мая 2021 г …, 2021

[41]	Improvement in tribological properties of Al6061-Sic
	Materials Today …, 2021

[42]	Особенности формирования структуры композита при спекании смеси элементарных порошков Al, Fe и Sn
	Металловедение и термическая …, 2021

[43]	Триботехнический эффект типа твёрдых добавок в сплав Al-Sn
	… конференции, 27–29 мая 2021 г …, 2021

[44]	Взаимодействие бора и гафния с кислородом в никелевом расплаве при Р
	Физика и химия обработки материалов, 2021

[45]	Development and Characterization of Al 6061 Mos2 Mmc and Optimization of Process Parameters for Machining with Wedm
	2020

[46]	DEVELOPMENT AND CHARACTERIZATION OF HYBRID ALUMINIUM METAL MATRIX COMPOSITES FOR FATIGUE/WEAR RESISTANT …
	2020

[47]	Исследование взаимосвязи между износостойкостью при сухом трении и механическими свойствами спеченных композитов системы Al-Sn
	Физика и химия обработки …, 2020

[48]	Влияние скорости скольжения на интенсивность изнашивания спеченного гибридного композита (Al–12Si)–40Sn при сухом трении
	2020

[49]	A re-analysis of effect of various process parameters on the mechanical properties of Mg based MMCs fabricated by powder metallurgy technique
	Materials Today: Proceedings, 2020

[50]	INFLUENCE OF REINFORCEMENT TYPES ON MECHANICAL PROPERTIES OF HYBRID ALUMINUM ALLOY
	2020

[51]	Experimental analysis on wire spark erosion machining of aluminium hybrid metal matrix composites by Taguchi approach
	2020

[52]	Erosion-Corrosion Behavior of Al-20% Ni-Al2O3 Metal Matrix Composites by Stir Casting
	2020

[53]	DEVELOPMENT AND CHARACTERIZATION OF Al 6061/MoS2 MMC AND OPTIMIZATION OF PROCESS PARAMETERS FOR MACHINING WITH WEDM
	2020

[54]	Development and Characterization of AI 6061 MoS2 MMC and optimization of process parameters for machining with WEDM
	2020

[55]	Development of Grey-ANFIS Model for Wire Electrical Discharge Machining of Al-GNP Composites
	2020

[56]	A Study on the Tribological Properties of Al-AlN-Y 2 W 3 O 12 Hybrid Composites
	2020

[57]	Influence of the Sliding Velocity on the Wear Intensity of the Sintered Hybrid Composite (Al–12Si)–40Sn upon Dry Friction
	2020

[58]	Investigating the Adhesive Wear Properties of Aluminum Hybrid Metal Matrix Composites at Elevated Temperatures Using RSM Technique.
	2019

[59]	A comprehensive review on material selection, processing, characterization and applications of aluminium metal matrix composites
	2019

[60]	Influence of Primary B4C Particles and Secondary Mica Particles on the Wear Performance of Al6061/B4C/Mica Hybrid Composites
	2019

[61]	Investigating the Adhesive Wear Properties ofAluminum Hybrid Metal Matrix Composites atElevated Temperatures using RSM Technique
	Tribology in Industry, 2019

[62]	Effect of Nickel on Mechanical and Tribological Properties of Al 6082
	2019

[63]	Tribological and mechanical properties of AA6061 reinforced with SiC and graphite for automobile applications
	2019

[64]	Wear Studies on the Heat Treated Al6061-µSIC and Al6061-NSIC Metal Matrix Composites
	2019

[65]	MECHANICAL CHARACTERIZATION OF AL6061-TUNGESTEN CARBIDE COMPOSITES USING POWDER METALLURGY TECHNIQUE
	International Journal of Engineering Applied Sciences and Technology, 2019

[66]	THE INFLUENCE OF GLASSY CARBON AND ITS FORMS ON TRIBOLOGICAL PROPERTIES OF ALUMINIUM MATRIX COMPOSITES
	Tribologia, 2019

[67]	Study on Wear Properties of Al7075/SiC/Graphite Hybrid Composites
	2019

[68]	Investigating the Adhesive Wear Properties of Aluminum Hybrid Metal Matrix Composites at Elevated Temperatures Using RSM Technique
	Tribology in …, 2019

[69]	THE INFLUENCE OF GLASSY CARBON AND ITS FORMS ON TRIBOLOGICAL PROPERTIES OF ALUMINIUM MATRIX COMPOSITES
	TRIBOLOGIA, 2019

[70]	FRICTION STIR PROCESSING: SIMULATION AND EXPERIMENTAL CHARACTERIZATIONS OF ALUMINIUM METAL MATRIX COMPOSITES
	2019

[71]	Mechanical Characterization of AL6061–Tungsten carbide composites using powder metallurgy technique
	2019

[72]	WPŁYW WĘGLA SZKLISTEGO I JEGO POSTACI NA WŁAŚCIWOŚCI TRIBOLOGICZNE KOMPOZYTÓW Z OSNOWĄ ALUMINIOWĄ
	KWARTALNIK …, 2019

[73]	Improving the biocompability and corrosion resistance of AZ31 Mg alloy for biomedical applications
	MS T, 2019

[74]	Cercetări privind utilizarea materialelor compozite la sistemele de frânare ale autovehiculelor
	2018

[75]	Effects of reinforcement distribution on the mechanical properties of Al–Fe3O4 nanocomposites fabricated via accumulative roll bonding
	2018

[76]	Metal Matrix Composites: Wetting and Infiltration
	2018

[77]	Experimental Investigation of Wear Properties of Aluminium LM6-Al2O3-SiC Metal Matrix Composite
	2018

[78]	Effect of Copper Alloying and Reinforcement Percentage on the Microstructure-Tribological Aspects of the Aluminium Alloy Composites
	Materials Today: Proceedings, 2018

[79]	Mechanical and tribological behaviour of molten salt processed self-lubricated aluminium composite under different treatments
	Materials Research Express, 2018

[80]	An investigation on the tribological characteristics of Al 7075 based single and hybrid nanocomposites
	Materials Today: Proceedings, 2018

[81]	Effect of SiC Reinforcement on Microstructure and Mechanical Properties of Aluminum Metal Matrix Composite
	IOP Conference Series: Materials Science and Engineering, 2018

[82]	Mechanical and Corrosion Behavior of Al-Ni-Sic Metal Matrix Composites by Powder Metallurgy
	Materials Today: Proceedings, 2018

[83]	Effect of SiC and Al2O3 particles addition to AA 2900 and AA 2024 MMC's synthesized through microwave sintering
	Materials Today: Proceedings, 2018

[84]	Metal Matrix Composites
	Springer Nature, 2018

[85]	Influence of reinforcements in friction stir processed magnesium alloys: Insight in medical applications
	Materials Research Express, 2018

[86]	Wear of Composites
	Metal Matrix Composites, 2018

[87]	Mechanical and Tribological Characterization Nitrided Al-7075/Al2O3 Metal Matrix Composites
	2018

[88]	A SIGNIFICANT REASSESS ON PERFORMANCE AND MACHINING OF METAL MATRIX COMPOSITES
	2017

[89]	Optimization of machining parameters of Aluminium based hybrid composites using Gray Relation Analysis
	Materials Today: Proceedings, 2017

[90]	Corrosion polarization behavior and microstructural analysis of AA1070 aluminium silicon carbide matrix composites in acid chloride concentrations
	2017

[91]	Effect of wear parameters on dry sliding behavior of Fly ash/Sic Particles Reinforced AA 2024 Hybrid Composites
	Materials Research Express, 2017

[92]	A Comprehensive Study of Aluminum Based Metal Matrix Composites: Challenges and Opportunities
	2017

[93]	Dry sliding wear behavior of TiC–AA7075 metal matrix composites
	2016

[94]	Aluminium matrix hybrid composites: a review of different reinforcements on mechanical and tribological characteristics
	Int. J. Explor. Emerg. Trends …, 2016

[95]	Microstructure and Hardness Studies of Magnesium-Aluminum Alloy and Fused Silica Particulate Composite
	International Journal for Ignited Minds, 2016

[96]	Study of Dispersoid Content and Chill Effect for Improved Mechanical Properties of Aluminum Alloy Composite
	International Journal for Ignited Minds, 2016

[97]	A review on the intensification of metal matrix composites and its nonconventional machining
	Science and Engineering of Composite Materials, 2016

[98]	Al6061 Hybrid Metal Matrix Composite Reinforced with Alumina and Molybdenum Disulphide
	Advances in Materials Science and Engineering, 2016

[99]	Processing methods and property evaluation of Al2O3 and SiC reinforced metal matrix composites based on aluminium 2xxx alloys
	2016

[100]	Multi-objective Optimization of Mechanical Properties of Aluminium 7075-Based Hybrid Metal Matrix Composite Using Genetic Algorithm
	Advances in 3D Printing & Additive Manufacturing Technologies, 2016

[101]	Production of Al-SiC-TiC hybrid composites using pure and 1056 aluminum powders prepared through microwave and conventional heating methods
	Journal of Alloys and Compounds, 2016

[102]	Corrosion behaviour of thermal cycled aluminium hybrid composites reinforced with rice husk ash and silicon carbide
	Journal of King Saud University - Engineering Sciences, 2016

[103]	Processing methods and property evaluation of Al 2 O 3 and SiC reinforced metal matrix composites based on aluminium 2xxx alloys
	2016

[104]	Fabrication of Al–SiC–B 4 C metal matrix composite by powder metallurgy technique and evaluating mechanical properties
	Perspectives in Science, 2016

[105]	Dry Sliding Wear Behaviour of Aluminium Alloy 6061-Redmud Metal Matrix Composites by Stir Casting Method
	IJCTA, 2016

[106]	Al-Mg based hybrid metal matrix composite reinforced with graphite and sic-preparation, Mechanical Behaviours Test and Microstructure Analysis
	2016

[107]	Fabrication of Al–SiC–B4C metal matrix composite by powder metallurgy technique and evaluating mechanical properties
	Perspectives in Science, 2016

[108]	Evaluation of mechanical and corrosive properties of aluminium AA7075 metal matrix composites
	2016

[109]	OPTIMIZATION TECHNIQUE TO STUDY DRY SLIDING WEAR BEHAVIOR OF ALUMINIUM ALLOY 2218 BASED SELF LUBRICATING COMPOSITE MATERIALS
	IJARIIE, 2015

[110]	Dry Sliding Wear Behavior of Tic-AA7075 Metal Matrix Composites
	2015

[111]	Tribological and Mechanical Characterization of Al-Ni-Sic Metal Matrix Composites
	2015

[112]	Mechanical and Tribological Performance of Aluminium Matrix Composite Reinforced with Nano Iron Oxide (Fe3O4)
	Composite, Hybrid, and Multifunctional Materials, Volume 4. Springer International Publishing, 2015

[113]	Study of Microstructure and Mechanical Behavior of Aluminum/Garnet/Carbon Hybrid Metal Matrix Composites (HMMCs) Fabricated by Chill Casting Method
	Journal of Materials Science and Chemical Engineering, 2015

[114]	A Survey of Aluminium Metal Matrix Composites Using Powder Metallurgy
	International Journal of Advanced Research Trends in Engineering and Technology, 2015

[115]	Experimental Investigations on Mechanical Properties of Hot Extruded Al-TiO2-Gr Hybrid Composites
	2015

[116]	Study of Dispersoid Content and Chill Effect for Improved Mechanical Properties of Aluminum-Garnet-Carbon Hybrid Metal Matrix Composites
	2015

[117]	A review on the mechanical properties, tribological behavior and the microstructural characterization of Aluminium metal matrix composites (AMMCs).
	International Journal of Scientific & Engineering Research, 2015

[118]	Experimental Investigation of aluminum doping crumb rubber/epoxy composite in reciprocating motion
	Journal of Communications Technology, Electronics and Computer Science, 2015

[119]	OPTIMIZATION TECHNIQUE TO STUDY DRY SLIDING WEAR BEHAVIOR OF ALUMINIUM ALLOY 2218 BASED SELF LUBRICATING COMPOSITE …
	International Journal Of Advance Research And Innovative Ideas In Education, 2015

[120]	Dry sliding wear behaviour of MWCNT reinforced commercial purity aluminiumcomposite
	2014

[121]	A Review on Sliding Wear Behaviour of Aluminium Matrix Composites with Hybrid Reinforcements for Automotive Applications
	Tribology Online, 2014

[122]	MECHANICAL AND TRIBOLOGICAL BEHAVIOUR OF ALUMINIUM METAL MATRIX COMPOSITES USING POWDER METALLURGY TECHNIQUE—A REVIEW
	2014

[123]	Characteristics of Aluminum Hybrid Composites
	International Journal of Materials and Metallurgical Engineering, 2014

[124]	EXPERIMENTAL ANALYSIS OF THE WEAR BEHAVIOR OF HYBRID METAL-MATRIX COMPOSITES OF LM25Al WITH EQUAL VOLUMES OF SiC+ TiO2
	Materiali in tehnologije, 2014

[125]	A Review on Fabrication & Characterization of Hybrid Aluminium Metal Matrix Composite
	International Journal, 2014

[126]	Sliding wear of LM25 aluminium alloy with 7.5% SiC+2.5% TiO2 and 2.5% SiC+7.5% TiO2 hybrid composites
	Journal of Composite Materials, 2014

[127]	Mechanical and tribological behavior of aluminum metal matrix composites using powder metallurgy technique-a review
	2014

[128]	PERFORMACE INVESTIGATION OF CRYOGENICALLY TREATED PISTON FOR WEAR AND HEAT DISTRIBUTION
	2014

[129]	Mechanical and Tribological Behaviour of Aluminium Metal Matrix Composites using Powder Metallurgy Technique—A Review.
	2014

[130]	Tribološko ponašanje hibridnih kompozita sa A356 matricom
	2013

[131]	Tribological behavior of hybrid (LM25Al+ SiC+ TiO2) metal matrix composites
	Procedia Engineering, 2013

[132]	A study of sliding wear behaviors of Al-7075 alloy and Al-7075 hybrid composite by response surface methodology analysis
	Materials & Design, 2013

[133]	Sliding wear of LM25 aluminium alloy with 7.5% SiC+ 2.5% TiO2 and 2.5% SiC+ 7.5% TiO2 hybrid composites
	Journal of Composite Materials, 2013

[134]	Research Article Effect of Addition of Fine SiC Particles on the Dry Sliding Wear Behaviour of Extruded 2014 Al-Alloy
	International Scholarly Research Notices, 2013

[135]	Effect of extrusion on the microstructure and properties of 2014–based particulate composites
	International Journal of Microstructure and Materials Properties, 2013

[136]	Tribological Behavior of Hybrid (LM25Al+ SiC+ TiO₂) Metal Matrix Composites
	Procedia Engineering, 2013

[137]	The effect of TiC additive on microstructure and final properties of microwave and conventional sintered Al-SiC composite
	rad, K Asadian… - Journal of Advanced …, 2013

[138]	Investigation of wear behaviour of Al+ Cu powder performs
	IOSR Journal of Engineering, 2012

[139]	Investigation of wear behaviour of Al+ Cu powder preforms.
	AK Tiwari, MTK, M Choubey, RK Ranjan - iosrjen.org, 2012

[140]	Effect of addition of fine SiC particles on the dry sliding wear behaviour of extruded 2014 Al-alloy
	ISRN Tribology, 2012

[141]	A Review on Machining and Tribological Behaviors of Aluminium Hybrid Composites
	Procedia Engineering, 2012

[142]	Effect of Reinforcements on Al8011 Metal Matrix Hybrid Composites with respect Compressive strength and Hardness


[143]	Characterisation Of Copper Metal Matrix Reinforced With TiN Composite


[144]	Ekstrüzyon yöntemi ile üretilen parçacık takviyeli alüminyum kompozit profillerin mekanik özelliklerinin incelenmesi

[1]	Advances in Sustainable Materials 2025 DOI:10.1016/B978-0-443-13849-2.00022-3

[2]	Application of machine learning in predicting mechanical properties of sandcrete blocks made from quarry dust: a review AI in Civil Engineering, 2024 DOI:10.1007/s43503-024-00033-7

[3]	Multi-Performance Optimization of the Mechanical Characteristics of Basalt Fiber and Silicon Carbide-Filled Aluminum Matrix Composites Journal of Engineering Sciences, 2024 DOI:10.21272/jes.2024.11(2).c1

[4]	An extensive study of mechanical properties and tribological characteristics for hybrid composites 2023 INTERNATIONAL CONFERENCE ON CIVIL, ARCHITECTURAL, AND ENVIRONMENTAL ENGINEERING (ICCAEE 2023), 2024 DOI:10.1063/5.0224994

[5]	Mechanical Investigation of a Recycled Aluminum Scrap Reinforced with Antimony 2024 International Conference on Science, Engineering and Business for Driving Sustainable Development Goals (SEB4SDG), 2024 DOI:10.1109/SEB4SDG60871.2024.10630291

[6]	Correlative evaluation of the corrosion resilience and passivation properties of zinc and aluminum alloys in neutral chloride and acid-chloride solutions Open Engineering, 2024 DOI:10.1515/eng-2022-0539

[7]	Evaluating the Mechanical Integrity of Multi-Pass Friction Stir Processed Aluminium Alloy Impregnated with Titanium Particles 2023 International Conference on Science, Engineering and Business for Sustainable Development Goals (SEB-SDG), 2023 DOI:10.1109/SEB-SDG57117.2023.10124517

[8]	Investigations on machinability characteristics of Cast Aluminum Alloy based (LM 26+Graphite+Fly ash) Hybrid Metal Matrix Composites for automobile components Materials and Manufacturing Processes, 2022 DOI:10.1080/10426914.2021.1962531

[9]	The Role of Tetra Hybrid Reinforcements on the Behavior of Aluminum Metal Matrix Composites Journal of Nanomaterials, 2022 DOI:10.1155/2022/1988293

[10]	An Insight into Mechanical and Metallurgical Behavior of Hybrid Reinforced Aluminum Metal Matrix Composite Advances in Materials Science and Engineering, 2022 DOI:10.1155/2022/7843981

[11]	Investigation of mechanical properties of SiC-reinforced seamless aluminium pipes fabricated using powder metallurgy followed by hot extrusion International Journal of Materials Research, 2022 DOI:10.1515/ijmr-2021-8556

[12]	The Role of Tetra Hybrid Reinforcements on the Behavior of Aluminum Metal Matrix Composites Journal of Nanomaterials, 2022 DOI:10.1155/2022/1988293

[13]	Development of Grey-ANFIS Model for Wire Electrical Discharge Machining of Al-GNP Composites Materials Today: Proceedings, 2021 DOI:10.1016/j.matpr.2020.07.205

[14]	Corrosion resistance and passivation behavior of 3004 AlMnMg and 4044AlSi aluminum alloys in acid-chloride electrolytes Materials Research Express, 2021 DOI:10.1088/2053-1591/ac286b

[15]	Machinability analysis on wire electrical discharge machining of stir casted AA2024/Al2O3/BN hybrid composite for aerospace applications Materials and Manufacturing Processes, 2021 DOI:10.1080/10426914.2020.1854466

[16]	A Study on the Tribological Properties of Al-AlN-Y2W3O12 Hybrid Composites Journal of Materials Engineering and Performance, 2020 DOI:10.1007/s11665-020-05086-0

[17]	Erosion-Corrosion Behavior of Al-20%Ni-Al₂O₃ Metal Matrix Composites by Stir Casting Materials Science Forum, 2020 DOI:10.4028/www.scientific.net/MSF.1002.161

[18]	Improvement in tribological properties of Al6061-Sic Materials Today: Proceedings, 2020 DOI:10.1016/j.matpr.2020.06.077

[19]	Study of tribological properties on aluminium based hybrid composite developed through microwave energy Materials Today: Proceedings, 2020 DOI:10.1016/j.matpr.2020.10.540

[20]	Evaluation of mechanical and tribological properties of AL7075 hybrid metal matrix composite reinforced with fly ash and graphite Materials Today: Proceedings, 2020 DOI:10.1016/j.matpr.2020.10.827

[21]	Erosion-Corrosion Behavior of Al-20%Ni-Al₂O₃ Metal Matrix Composites by Stir Casting Materials Science Forum, 2020 DOI:10.4028/www.scientific.net/MSF.1002.161

[22]	Erosion-Corrosion Behavior of Al-20%Ni-Al₂O₃ Metal Matrix Composites by Stir Casting Materials Science Forum, 2020 DOI:10.4028/www.scientific.net/MSF.1002.161

[23]	THE INFLUENCE OF GLASSY CARBON AND ITS FORMS ON TRIBOLOGICAL PROPERTIES OF ALUMINIUM MATRIX COMPOSITES Tribologia, 2019 DOI:10.5604/01.3001.0013.5437

[24]	Influence of Primary B4C Particles and Secondary Mica Particles on the Wear Performance of Al6061/B4C/Mica Hybrid Composites Journal of Bio- and Tribo-Corrosion, 2019 DOI:10.1007/s40735-019-0267-z

[25]	Tribological and mechanical properties of AA6061 reinforced with SiC and graphite for automobile applications Materials Today: Proceedings, 2019 DOI:10.1016/j.matpr.2019.05.354

[26]	Effect of Nickel on Mechanical and Tribological Properties of Al 6082 Materials Today: Proceedings, 2019 DOI:10.1016/j.matpr.2019.05.117

[27]	Mechanical and tribological behaviour of molten salt processed self-lubricated aluminium composite under different treatments Materials Research Express, 2018 DOI:10.1088/2053-1591/aac4ac

[28]	Mechanical and Corrosion Behavior of Al-Ni-Sic Metal Matrix Composites by Powder Metallurgy Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2018.02.204

[29]	Effect of SiC Reinforcement on Microstructure and Mechanical Properties of Aluminum Metal Matrix Composite IOP Conference Series: Materials Science and Engineering, 2018 DOI:10.1088/1757-899X/376/1/012057

[30]	Influence of reinforcements in friction stir processed magnesium alloys: insight in medical applications Materials Research Express, 2018 DOI:10.1088/2053-1591/aaeea8

[31]	A Comprehensive Study of Aluminum Based Metal Matrix Composites: Challenges and Opportunities Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2018.10.186

[32]	A review on the intensification of metal matrix composites and its nonconventional machining Science and Engineering of Composite Materials, 2018 DOI:10.1515/secm-2015-0287

[33]	Advances in 3D Printing & Additive Manufacturing Technologies 2017 DOI:10.1007/978-981-10-0812-2_7

[34]	Tribological and mechanical characterization of Al-Ni-SiC metal matrix composites 2017 DOI:10.1063/1.4990173

[35]	Optimization of machining parameters of Aluminium based hybrid composites using Gray Relation Analysis Materials Today: Proceedings, 2017 DOI:10.1016/j.matpr.2017.06.305

[36]	Corrosion polarization behavior and microstructural analysis of AA1070 aluminium silicon carbide matrix composites in acid chloride concentrations Cogent Engineering, 2017 DOI:10.1080/23311916.2017.1422229

[37]	Study of Microstructure and Mechanical Behavior of Aluminum/Garnet/Carbon Hybrid Metal Matrix Composites (HMMCs) Fabricated by Chill Casting Method Journal of Materials Science and Chemical Engineering, 2015 DOI:10.4236/msce.2015.33001

[38]	A Review on Sliding Wear Behaviour of Aluminium Matrix Composites with Hybrid Reinforcements for Automotive Applications Tribology Online, 2014 DOI:10.2474/trol.9.121

[39]	Sliding wear of LM25 aluminium alloy with 7.5% SiC+2.5% TiO2 and 2.5% SiC+7.5% TiO2 hybrid composites Journal of Composite Materials, 2014 DOI:10.1177/0021998313496592

[40]	Sliding wear of LM25 aluminium alloy with 7.5% SiC+2.5% TiO2 and 2.5% SiC+7.5% TiO2 hybrid composites Journal of Composite Materials, 2014 DOI:10.1177/0021998313496592

[41]	Effect of Addition of Fine SiC Particles on the Dry Sliding Wear Behaviour of Extruded 2014 Al-Alloy ISRN Tribology, 2013 DOI:10.5402/2013/648524

[42]	Tribological Behavior of Hybrid (LM25Al + SiC+ TiO2) Metal Matrix Composites Procedia Engineering, 2013 DOI:10.1016/j.proeng.2013.09.142

[43]	A Review on Machining and Tribological Behaviors of Aluminium Hybrid Composites Procedia Engineering, 2012 DOI:10.1016/j.proeng.2012.06.174

Follow SCIRP

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

Journals Menu

Home

About SCIRP

Service

Policies