|
[1]
|
Breakthrough of Powder Additives in Powder Mixed Micro-Electric Discharge Machining
|
|
Electro-Micromachining …,
2024 |
|
|
|
|
[2]
|
Optimization and effect of dielectric fluid with Zr and Ni on electrical discharge machining of die steel material: Original scientific paper
|
|
Chemical Industry & …,
2023 |
|
|
|
|
[3]
|
Powder Mixed Electrical Discharge Machining (PMEDM)
|
|
Electric Discharge Hybrid-Machining …,
2022 |
|
|
|
|
[4]
|
12 Powder Discharge Mixed Machining Electrical
|
|
Electric Discharge Hybrid-Machining …,
2022 |
|
|
|
|
[5]
|
Effect of powder mixed dielectric medium in electrical discharge machining–A review
|
|
Materials Today: Proceedings,
2022 |
|
|
|
|
[6]
|
Machinability of SUPERNI-800 during PMEDM using the Taguchi method
|
|
2021 |
|
|
|
|
[7]
|
Improvement of process performance of powder mixed electrical discharge machining by optimisation-A Review
|
|
Advances in Materials …,
2021 |
|
|
|
|
[8]
|
Optimizing Main Process Parameters When Conducting Powder-Mixed Electrical Discharge Machining of Hardened 90CrSi
|
|
Machines,
2021 |
|
|
|
|
[9]
|
Performance enhancement of microelectrical discharge machining using powder additives mixed dielectrics
|
|
2021 |
|
|
|
|
[10]
|
Optimization of EDM Process Parameters: A Review of Technique, Process, and Outcome
|
|
2021 |
|
|
|
|
[11]
|
Transition from EDM to PMEDM–Impact of suspended particulates in the dielectric on Ti6Al4V and other distinct material surfaces: A review
|
|
2021 |
|
|
|
|
[12]
|
A Comparative Study of Electro-discharge Drilling Process Using Solid and Tubular Electrodes
|
|
2021 |
|
|
|
|
[13]
|
Powder mixed electric discharge machining–A review
|
|
2020 |
|
|
|
|
[14]
|
Recent advances and perceptive insights into powder-mixed dielectric fluid of EDM
|
|
2020 |
|
|
|
|
[15]
|
Advances in Abrasive Assisted EDM and Micro-EDM
|
|
2020 |
|
|
|
|
[16]
|
A review on the performance of the materials by surface modification through EDM
|
|
2020 |
|
|
|
|
[17]
|
On material removal and tool wear rate in powder contained electric discharge machining of die steels
|
|
2020 |
|
|
|
|
[18]
|
Comparison of the Removal Rate in EDM Based on the Mixed Environment
|
|
2020 |
|
|
|
|
[19]
|
Multi-response Optimization in PMSEDM Process Using Taguchi-Grey Method
|
|
2020 |
|
|
|
|
[20]
|
Machinability performance of Chromium powder mixed EDM of AISI D2 Steel
|
|
2019 |
|
|
|
|
[21]
|
On Material Removal Rate and Overcut In Electric Discharge Machining Consisting Nickel Metallic Powder
|
|
Think India Journal,
2019 |
|
|
|
|
[22]
|
Parametric Analysis For Material Removal Rate of Die Steels In Electric Discharge Machining Consisting Nickel Metallic Powder
|
|
Think India …,
2019 |
|
|
|
|
[23]
|
Performance parameters characteristics of PMEDM: A review
|
|
2018 |
|
|
|
|
[24]
|
Multi-objective Optimization of MWCNT Mixed Electric Discharge Machining of Al–30SiCp MMC Using Particle Swarm Optimization
|
|
Futuristic Composites,
2018 |
|
|
|
|
[25]
|
OPTIMIZATION CHARACTERISTICS OF POWDER MIXED ELECTRICAL DISCHARGE MACHINING (PMEDM)
|
|
International Journal of Applied Engineering Research,
2018 |
|
|
|
|
[26]
|
INVESTIGATION ON ELECTRODE VIBRATION BEHAVIOR OF MACHINING CHARACTERISTICS IN NANO-TiC MIXED AN EDM MACHINING PERFORMANCE.
|
|
Journal of the …,
2018 |
|
|
|
|
[27]
|
An approach for increasing the micro-hardness in electrical discharge machining by adding conductive powder to the dielectric
|
|
Materials Today: Proceedings,
2017 |
|
|
|
|
[28]
|
1.7 Techniques to Improve EDM Capabilities: A Review
|
|
2016 |
|
|
|
|
[29]
|
Experimental Study of MRR, TWR, SR on SS 316 and AISI D2 steel using Aluminium Electrode on EDM
|
|
2016 |
|
|
|
|
[30]
|
State of the art in powder mixed dielectric for EDM applications
|
|
Precision Engineering,
2016 |
|
|
|
|
[31]
|
The study of using assistant electrode in wire electrical discharge machining of polycrystalline silicon
|
|
2016 |
|
|
|
|
[32]
|
Studies on the Material Removal Rate of Al-SiC Composites Machined by Powder-Mixed EDM Technique
|
|
International Journal of Engineering and Technology (IJET),
2016 |
|
|
|
|
[33]
|
Determination of Best Concentration of Powder to Be Mixed in Di-Electric Fluid of PMEDM
|
|
2016 |
|
|
|
|
[34]
|
A Review on Current Trends in PM-EDM using Commercial Kerosene as Di-Electric Fluid
|
|
International Journal of Science, Engineering and Technology Research (IJSETR),
2016 |
|
|
|
|
[35]
|
Enhancing electrical discharge machining performance through employment of titanium nanopowder mixed dielectric and severe plastic deformation of electrode …
|
|
2016 |
|
|
|
|
[36]
|
Enhancing Electrical Discharge Machining Performance Through Employment of Titanium Nanopowder Mixed Dielectric and Severe Plastic Deformation of Electrode
|
|
2016 |
|
|
|
|
[37]
|
Multi-attribute optimization of machining process parameters in powder mixed electro-discharge machining using TOPSIS and grey relational analysis
|
|
Engineering Science and Technology, an International Journal,
2015 |
|
|
|
|
[38]
|
Effect of Powder Mixed Electric Discharge Machining (PMEDM) on Various Materials with Different Powders: A Review
|
|
International Journal for Innovative Research in Science and Technology,
2015 |
|
|
|
|
[39]
|
Effects of chromium powder mixed in electrical discharge machining of AISI D2 hardened steels
|
|
2015 |
|
|
|
|
[40]
|
Development and Experimental Study of Powder Mixed EDM for Cemented Carbide Work piece
|
|
Intl J Engg Sci Adv Research,
2015 |
|
|
|
|
[41]
|
Nano-Finishing of Materials by Powder Mixed Electric Discharge Machining (PMEDM): A Review
|
|
Science of Advanced Materials,
2015 |
|
|
|
|
[42]
|
Experimental investigation of machining characteristics of Titanium alloy (Ti-6Al-4V) by using EDM process
|
|
2015 |
|
|
|
|
[43]
|
Development of mirror like surface characteristics using nano powder mixed electric discharge machining (NPMEDM)
|
|
The International Journal of Advanced Manufacturing Technology,
2015 |
|
|
|
|
[44]
|
Finite element modeling and analysis of powder mixed electric discharge machining process for temperature distribution and volume removal considering multiple craters
|
|
International Journal of Modeling, Simulation, and Scientific Computing,
2014 |
|
|
|
|
[45]
|
Current Advanced Research Development of Electric Discharge Machining (EDM): A Review
|
|
SK Choudhary, RS Jadoun - ijrat.org,
2014 |
|
|
|
|
[46]
|
Finite element modeling and analysis of powder mixed electric discharge machining process for temperature distribution and volume removal considering multiple …
|
|
International Journal of Modeling, Simulation, and Scientific Computing,
2014 |
|
|
|
|
[47]
|
Finite element modeling and analysis of powder mixed electric discharge machining process for temperature distribution and volume removal considering multiple …
|
|
International Journal of Modeling, Simulation, and Scientific Computing,
2014 |
|
|
|
|
[48]
|
Study on optimization and machining characteristics of electric discharge machining using powder suspension dielectric fluids
|
|
2012 |
|
|
|
|
[49]
|
Nanoparticle Incorporation to Enhance Titanium Alloy Electric Discharge Machining Capabilities
|
|
|
|
|
|
|
[50]
|
Parametric Optimization of PMEDM Process using Graphite Powder Mixed Dielectric
|
|
|
|
|
|
|
[51]
|
OPTIMIZATION AND EFFECT OF DIELECTRIC FLUID WITH Zr AND Ni ON ELECTRICAL DISCHARGE MACHINING OF DIE STEEL MATERIAL
|
|
|
|
|
|