[1]
|
Investigation on effects of parameters of GMAW process on bead geometry, hardness and microstructure of AISI 410 steel weldments
|
|
2021 |
|
|
[2]
|
Application of flux cored arc welding (fcaw) without pre-heating for heavy structures in ship building fabrication & construction of heavy offshore structural steels
|
|
2020 |
|
|
[3]
|
Performance characteristics of GMAW process parameters of multi-bead overlap weld claddings
|
|
2020 |
|
|
[4]
|
Investigating the effect of pilot errors and its probability to change trajectory parameters during maneuvers
|
|
2019 |
|
|
[5]
|
STUDY ON THE FAILURES OF WELD JOINTS OF ROOF HOOPS & BIAS MEMBERS IN THE PROJECT JEWEL ROOF CONSTRUCTION AND APPLICATION OF …
|
|
2019 |
|
|
[6]
|
Cladding of Mild Steel Plates Using GMAW Process
|
|
International Journal of Emerging Technologies in Engineering Research (IJETER),
2018 |
|
|
[7]
|
Development of Mathematical Models for Prediction of Weld Bead Geometry of GTAW Stainless Steel
|
|
2017 |
|
|
[8]
|
Application of RSM to Optimize MIG welding Process Parameters for Hardness
|
|
International Journal of Emerging Technologies in Engineering Research(IJETER),
2017 |
|
|
[9]
|
Weld Bead Geometry Dimensions Measurement based on Pixel Intensity by Image Analysis Techniques
|
|
Journal of The Institution of Engineers (India): Series C,
2017 |
|
|
[10]
|
Optimization of MIG Welding Process Parameters: A Review
|
|
Research Journal of Engineering and Technology,
2017 |
|
|
[11]
|
Parametric analysis of the stringer bead reinforcement area and prediction of the number of beads in a single-V butt joint, using the robotic Flux-cored arc welding …
|
|
The International Journal of Advanced Manufacturing Technology,
2017 |
|
|
[12]
|
Optimization of surface appearance for wire and arc additive manufacturing of Bainite steel
|
|
The International Journal of Advanced Manufacturing Technology,
2016 |
|
|
[13]
|
Effects of process parameters and thermo-mechanical simulation of GMAW process for welding of 3Cr12 steel
|
|
International Journal of Agricultural Sustainability,
2016 |
|
|
[14]
|
Parametric analysis of the stringer bead reinforcement area and prediction of the number of beads in a single-V butt joint, using the robotic Flux-cored arc welding …
|
|
The International Journal of Advanced Manufacturing Technology,
2016 |
|
|
[15]
|
Statistical study of a 308L austenitic steel deposit in SAE 1020 steel
|
|
2016 |
|
|
[16]
|
EFFECTS OF WELDING CURRENT AND ARC VOLTAGE ON FCAW WELD BEAD GEOMETRY
|
|
International Journal of Research in Engineering and Technology,
2015 |
|
|
[17]
|
Multi–objective optimisation of FCAW parameters using grey–based Taguchi with entropy technique
|
|
International Journal of Industrial and Systems Engineering,
2015 |
|
|
[18]
|
Groove configurations of a flux-cored arc welding process used in critical structures of precision mechanical presses—mechanical and metallurgical studies
|
|
The International Journal of Advanced Manufacturing Technology,
2015 |
|
|
[19]
|
Influence of Welding Process Parameters on Bead Geometry-A Review
|
|
Journal of Mechanical and Mechanics Engineering,
2015 |
|
|
[20]
|
Multi-Objective Optimization Of Bead Geometry And Dilution In FCAW Process Using PSO
|
|
International Journal of Applied Engineering Research,
2014 |
|
|
[21]
|
Development of mathematical model with a genetic algorithm for automatic GMA welding process
|
|
The International Journal of Advanced Manufacturing Technology,
2014 |
|
|
[22]
|
Optimization of flux-cored arc welding process parameters by using genetic algorithm
|
|
The International Journal of Advanced Manufacturing Technology,
2014 |
|
|
[23]
|
Διεξαγωγή μετωπικών συγκολλήσεων FCAW διφασικών χαλύβων FCA με χρήση του αυτοματοποιημένου συγκολλητικού βραχίονα IGM RT 330.1
|
|
2014 |
|
|
[24]
|
Welding Procedures Specification for FCAW of Wind Towers
|
|
NC de Matos,
2012 |
|
|
[25]
|
Correlation between Process Variables in Shielded Metal-Arc Welding (SMAW) Process and Post Weld Heat Treatment (PWHT) on Some Mechanical Properties of Low Carbon Steel Welds
|
|
Journal of Minerals and Materials Characterization and Engineering,
2012 |
|
|
[26]
|
Towards autonomous mobile robotic welding: Theoretical development and empirical validation
|
|
ProQuest Dissertations Publishing,
2012 |
|
|