[1]
|
Structural Composite Materials
Composites Science and Technology,
2024
DOI:10.1007/978-981-99-5982-2_14
|
|
|
[2]
|
Wear debris analysis of Al-Si/MWCNT nanocomposite during dry sliding wear tests
Engineering Research Express,
2024
DOI:10.1088/2631-8695/ad4cb0
|
|
|
[3]
|
Wear performance of aluminium hybrid nanocomposites using Taguchi
Engineering Research Express,
2024
DOI:10.1088/2631-8695/ad4b95
|
|
|
[4]
|
Tribological study of magnesium-based AZ91/TiC/rGO hybrid composite prepared by powder metallurgy route: an experimental and analytical approach
Advances in Materials and Processing Technologies,
2024
DOI:10.1080/2374068X.2024.2373562
|
|
|
[5]
|
Investigating wear behavior of Al/Al2O3/Gr hybrid composite prepared by centrifugal casting method
Mechanic of Advanced and Smart Materials,
2023
DOI:10.61186/masm.3.3.285
|
|
|
[6]
|
Wear and heat treatment studies on Al7075 alloy hybrid composites
Materials Today: Proceedings,
2023
DOI:10.1016/j.matpr.2023.01.272
|
|
|
[7]
|
Experimental investigation on the impact of process parameters on the tribological behaviors of the hybrid metal matrix composites
INTELLIGENT BIOTECHNOLOGIES OF NATURAL AND SYNTHETIC BIOLOGICALLY ACTIVE SUBSTANCES: XIV Narochanskie Readings,
2023
DOI:10.1063/5.0179245
|
|
|
[8]
|
Fabrication and wear on composite brake drum analysis
INTERNATIONAL CONFERENCE ON SUSTAINABLE MATERIALS SCIENCE, STRUCTURES, AND MANUFACTURING,
2023
DOI:10.1063/5.0168260
|
|
|
[9]
|
Wear and heat treatment studies on Al7075 alloy hybrid composites
Materials Today: Proceedings,
2023
DOI:10.1016/j.matpr.2023.01.272
|
|
|
[10]
|
Wear and heat treatment studies on Al7075 alloy hybrid composites
Materials Today: Proceedings,
2023
DOI:10.1016/j.matpr.2023.01.272
|
|
|
[11]
|
Advances in Manufacturing, Automation, Design and Energy Technologies
Lecture Notes in Mechanical Engineering,
2023
DOI:10.1007/978-981-99-1288-9_3
|
|
|
[12]
|
Tribological behaviour of metal matrix composites
Materials Today: Proceedings,
2022
DOI:10.1016/j.matpr.2021.10.175
|
|
|
[13]
|
Investigations on Machinability Behavior in Turning of Al7075/Beryl/Graphene Nano Platelets Hybrid Composites with Multilayer Coated Carbide Insert Using Taguchi and Statistical Techniques
Key Engineering Materials,
2022
DOI:10.4028/p-own7g0
|
|
|
[14]
|
Investigation on mechanical and Tribological properties of Al7075 reinforced with silicon carbide and graphite particulates
Materials Today: Proceedings,
2022
DOI:10.1016/j.matpr.2021.11.190
|
|
|
[15]
|
Dry Sliding Wear Study on AA6061/SiCp Nano and AA6061/SiCp/Gr Hybrid Nanocomposites
Silicon,
2022
DOI:10.1007/s12633-022-01908-z
|
|
|
[16]
|
Effect of beryl and graphene nano platelets reinforcements on the wear behaviour of AL7075- beryl graphene particulate hybrid nano composites
Journal of Mines, Metals and Fuels,
2022
DOI:10.18311/jmmf/2021/30100
|
|
|
[17]
|
Experimental Analysis on Tribological Characteristics of AZ60A/Gr/BN Magnesium Composites
Journal of Nanomaterials,
2022
DOI:10.1155/2022/2312076
|
|
|
[18]
|
Tribological Analysis of Jute/Coir Polyester Composites Filled with Eggshell Powder (ESP) or Nanoclay (NC) Using Grey Rational Method
Fibers,
2022
DOI:10.3390/fib10070060
|
|
|
[19]
|
Optimization on Wear Rate of AA2219/Nanographite/TiB2/Si3N4 Hybrid Composites Using Taguchi Process
Journal of Nanomaterials,
2022
DOI:10.1155/2022/1814623
|
|
|
[20]
|
Investigation on mechanical and Tribological properties of Al7075 reinforced with silicon carbide and graphite particulates
Materials Today: Proceedings,
2022
DOI:10.1016/j.matpr.2021.11.190
|
|
|
[21]
|
Wear Optimization of Aluminium and Hybrid Reinforcement Metal Matrix Composites Using Response Surface Methodology
Materials Science Forum,
2022
DOI:10.4028/p-8x10qb
|
|
|
[22]
|
Multi-objective optimisation of dry sliding wear control parameters for stir casted AA7075- TiO2 composites using Taguchi-Grey relational approach
Australian Journal of Mechanical Engineering,
2022
DOI:10.1080/14484846.2020.1815997
|
|
|
[23]
|
An experimental investigation on mechanical properties of aluminium-7075 based graphite and bagasse ash particles reinforced metal matrix composite
THE 8TH ANNUAL INTERNATIONAL SEMINAR ON TRENDS IN SCIENCE AND SCIENCE EDUCATION (AISTSSE) 2021,
2022
DOI:10.1063/5.0108849
|
|
|
[24]
|
Investigations on Machinability Behavior in Turning of Al7075/Beryl/Graphene Nano Platelets Hybrid Composites with Multilayer Coated Carbide Insert Using Taguchi and Statistical Techniques
Key Engineering Materials,
2022
DOI:10.4028/p-own7g0
|
|
|
[25]
|
Dry Sliding Wear Study on AA6061/SiCp Nano and AA6061/SiCp/Gr Hybrid Nanocomposites
Silicon,
2022
DOI:10.1007/s12633-022-01908-z
|
|
|
[26]
|
Wear Optimization of Aluminium and Hybrid Reinforcement Metal Matrix Composites Using Response Surface Methodology
Materials Science Forum,
2022
DOI:10.4028/p-8x10qb
|
|
|
[27]
|
Experimental Analysis on Tribological Characteristics of AZ60A/Gr/BN Magnesium Composites
Journal of Nanomaterials,
2022
DOI:10.1155/2022/2312076
|
|
|
[28]
|
Optimization on Wear Rate of AA2219/Nanographite/TiB2/Si3N4 Hybrid Composites Using Taguchi Process
Journal of Nanomaterials,
2022
DOI:10.1155/2022/1814623
|
|
|
[29]
|
Wear Optimization of Aluminium and Hybrid Reinforcement Metal Matrix Composites Using Response Surface Methodology
Materials Science Forum,
2022
DOI:10.4028/p-8x10qb
|
|
|
[30]
|
Study on effect of ceramics on dry sliding wear behaviour of Al-Cu-Mg based metal matrix composite at different temperature
Materials Today: Proceedings,
2021
DOI:10.1016/j.matpr.2021.04.034
|
|
|
[31]
|
A Contemporary Review of Aluminium MMC Developed through Stir-Casting Route
Materials,
2021
DOI:10.3390/ma14216386
|
|
|
[32]
|
Encyclopedia of Materials: Composites
2021
DOI:10.1016/B978-0-12-819724-0.00104-X
|
|
|
[33]
|
Effect of dry sliding wear parameters on the tribological behavior of aluminum hybrid metal matrix composites
Materials Today: Proceedings,
2021
DOI:10.1016/j.matpr.2020.12.113
|
|
|
[34]
|
Aluminium metal matrix composites and effect of reinforcements – A Review
IOP Conference Series: Materials Science and Engineering,
2021
DOI:10.1088/1757-899X/1057/1/012098
|
|
|
[35]
|
An Experimental Investigation on the Material Removal Rate and Surface Roughness of a Hybrid Aluminum Metal Matrix Composite (Al6061/SiC/Gr)
Metals,
2021
DOI:10.3390/met11091449
|
|
|
[36]
|
Thermal Conductivity Optimization of Porous Alumina Ceramics via Taguchi Model
Materials Science Forum,
2020
DOI:10.4028/www.scientific.net/MSF.1002.125
|
|
|
[37]
|
Parametric studies on dry sliding wear behaviour of Al-7075 alloy matrix composite using S/N ratio and ANOVA analysis
Materials Research Express,
2020
DOI:10.1088/2053-1591/ab654a
|
|
|
[38]
|
Investigation of Corrosion Behavior of SiC-Reinforced Al 6061/SiC Metal Matrix Composites Using Taguchi Technique
Journal of Bio- and Tribo-Corrosion,
2020
DOI:10.1007/s40735-020-0328-3
|
|
|
[39]
|
Study of tribological behaviour of hybrid metal matrix composites prepared by stir casting method
Materials Today: Proceedings,
2020
DOI:10.1016/j.matpr.2020.04.527
|
|
|
[40]
|
Analysing the Mechanical Properties and Corrosion Phenomenon of Reinforced Metal Matrix Composite
Materials Research,
2020
DOI:10.1590/1980-5373-mr-2019-0681
|
|
|
[41]
|
Thermal Conductivity Optimization of Porous Alumina Ceramics via Taguchi Model
Materials Science Forum,
2020
DOI:10.4028/www.scientific.net/MSF.1002.125
|
|
|
[42]
|
Studies on mechanical properties of graphite reinforced AA7475 metal matrix composites
Materials Today: Proceedings,
2020
DOI:10.1016/j.matpr.2020.10.654
|
|
|
[43]
|
Numerical Modelling of Nanocomposites Using GA and FD Techniques
Materials Science Forum,
2019
DOI:10.4028/www.scientific.net/MSF.969.478
|
|
|
[44]
|
Characteristics of A6061/(Glass Fibre + AL2O3 + SiC + B4C) Reinforced Hybrid Composite Prepared through STIR Casting
Advances in Materials Science and Engineering,
2019
DOI:10.1155/2019/6104049
|
|
|
[45]
|
Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018)
Lecture Notes in Mechanical Engineering,
2019
DOI:10.1007/978-981-13-2697-4_2
|
|
|
[46]
|
Surface mechanical and self-lubricating properties of MWCNT impregnated aluminium surfaces
Surface Engineering,
2019
DOI:10.1080/02670844.2019.1584959
|
|
|
[47]
|
Characterization of Al–Si12Fe/silicon nitride composites based on microstructure and influence of weight fraction of silicon nitride particles on the mechanical and tribological behaviour
Materials Research Express,
2019
DOI:10.1088/2053-1591/ab149d
|
|
|
[48]
|
Advances in Interdisciplinary Engineering
Lecture Notes in Mechanical Engineering,
2019
DOI:10.1007/978-981-13-6577-5_44
|
|
|
[49]
|
Experimental study on the mechanical properties of heat treated aluminium composites
Materials Research Express,
2019
DOI:10.1088/2053-1591/ab2ebb
|
|
|
[50]
|
Wear testing of in situ cast AA8011-TiB2 metal matrix composites
Materials Testing,
2019
DOI:10.3139/120.111386
|
|
|
[51]
|
An Experimental Investigation of Drilling Al/Sic/Mica Hybrid Composites
Materials Today: Proceedings,
2019
DOI:10.1016/j.matpr.2019.05.162
|
|
|
[52]
|
Numerical Modelling of Nanocomposites Using GA and FD Techniques
Materials Science Forum,
2019
DOI:10.4028/www.scientific.net/MSF.969.478
|
|
|
[53]
|
Characterization of Wear Properties of Epoxy - SiC - Alumina Filled Polymer Matrix Composites
International Journal of Scientific Research in Science and Technology,
2019
DOI:10.32628/IJSRST196516
|
|
|
[54]
|
Numerical Modelling of Nanocomposites Using GA and FD Techniques
Materials Science Forum,
2019
DOI:10.4028/www.scientific.net/MSF.969.478
|
|
|
[55]
|
Influence Of Mechanical &Tribological BehaviourOf Al 2024 MMC Fabricated By Stir Casting Technique- A Review
Materials Today: Proceedings,
2018
DOI:10.1016/j.matpr.2018.02.170
|
|
|
[56]
|
Influence of abrasive water jet machining parameter on performance characteristics of AA7075-ZrSiO4-hBN hybrid metal matrix composites
Materials Research Express,
2018
DOI:10.1088/2053-1591/aadabf
|
|
|
[57]
|
Optimization of friction and wear behaviour of Al7075-Al2O3-B4C metal matrix composites using Taguchi method
IOP Conference Series: Materials Science and Engineering,
2018
DOI:10.1088/1757-899X/314/1/012025
|
|
|
[58]
|
Studies on Mechanical Behaviour of Aluminium-Silicon Carbide-Copper Metal Matrix Composite
MATEC Web of Conferences,
2018
DOI:10.1051/matecconf/201816601001
|
|
|
[59]
|
Effect of amount of boron carbide on wear loss of Al-6061 matrix composite by Taguchi technique and Response surface analysis
IOP Conference Series: Materials Science and Engineering,
2018
DOI:10.1088/1757-899X/376/1/012071
|
|
|
[60]
|
Mechanical and Wear Behavior of Aluminium-Zircon Sand-Flyash Metal Matrix Composite
IOP Conference Series: Materials Science and Engineering,
2018
DOI:10.1088/1757-899X/390/1/012018
|
|
|
[61]
|
Study and comparison of A356-WC composite and A356 alloy for an off-road vehicle chassis
Materials Today: Proceedings,
2018
DOI:10.1016/j.matpr.2018.11.006
|
|
|
[62]
|
Effect of High Temperature on Wear Behavior of Stir Cast Aluminium/Boron Carbide Composites
Mechanics and Mechanical Engineering,
2018
DOI:10.2478/mme-2018-0082
|
|
|
[63]
|
A Study of Tribological Behaviour of Aluminum-7075/SiC Metal Matrix Composite
Materials Today: Proceedings,
2018
DOI:10.1016/j.matpr.2018.06.368
|
|
|
[64]
|
Cumulative influence of nanoparticles on MMCs’ time–temperature history curve
Nanomaterials and Energy,
2018
DOI:10.1680/jnaen.17.00011
|
|
|
[65]
|
Dry Sliding Wear Behavior of the Reinforced by Graphite Particle and Heat Treated of Recycled Aluminum AA6061 Based MMC Fabricated by Powder Metallurgy Method
Key Engineering Materials,
2017
DOI:10.4028/www.scientific.net/KEM.740.9
|
|
|
[66]
|
Optimization ofWear Performance of Castor Oil based Lubricant using Taguchi Technique
Materials Today: Proceedings,
2017
DOI:10.1016/j.matpr.2017.02.055
|
|
|
[67]
|
Tribological Performance of Al-MMC Reinforced withTreated Fly Ash using Response Surface Methodology
Indian Journal of Science and Technology,
2017
DOI:10.17485/ijst/2017/v10i15/113824
|
|
|
[68]
|
Wear behavior of Al-7%Si-0.3%Mg/melon shell ash particulate composites
Heliyon,
2017
DOI:10.1016/j.heliyon.2017.e00375
|
|
|
[69]
|
Investigation of Mechanical Properties and Dry Sliding Wear Behaviour of Graphite Reinforced Al7068 Alloy
Applied Mechanics and Materials,
2017
DOI:10.4028/www.scientific.net/AMM.867.10
|
|
|
[70]
|
Microstructure and Dry Sliding Wear Behaviour of Al2219-TiC Composites
Materials Today: Proceedings,
2017
DOI:10.1016/j.matpr.2017.08.058
|
|
|
[71]
|
Investigation of Mechanical and Wear Properties of LM24/Silicate/Fly Ash Hybrid Composite Using Vortex Technique
Advances in Materials Science and Engineering,
2016
DOI:10.1155/2016/6728237
|
|
|
[72]
|
The experimental optimization of abrasive wear resistance model for an in-situ AlB2/Al-4Cu metal matrix composite
Industrial Lubrication and Tribology,
2016
DOI:10.1108/ILT-12-2015-0198
|
|
|
[73]
|
Effect of SiC and Graphite Particulates Addition on Wear Behaviour of Al2219 Alloy Hybrid Composites
IOP Conference Series: Materials Science and Engineering,
2016
DOI:10.1088/1757-899X/149/1/012108
|
|
|
[74]
|
Microstructure and Tensile Behaviour of B4C Reinforced ZA43 Alloy Composites
IOP Conference Series: Materials Science and Engineering,
2016
DOI:10.1088/1757-899X/149/1/012115
|
|
|
[75]
|
Evaluation of the Taguchi Method for Wear Behavior of Al6061/Cu-SiC/Cu-Gr Hybrid Composite
Materials Today: Proceedings,
2015
DOI:10.1016/j.matpr.2015.07.262
|
|
|
[76]
|
Study of Microstructure and Mechanical Behavior of Aluminum/Garnet/Carbon Hybrid Metal Matrix Composites (HMMCs) Fabricated by Chill Casting Method
Journal of Materials Science and Chemical Engineering,
2015
DOI:10.4236/msce.2015.33001
|
|
|
[77]
|
Synthesis of Metal Matrix Hybrid Composites and Evaluation of Mechanical and Tribological Properties
Applied Mechanics and Materials,
2015
DOI:10.4028/www.scientific.net/AMM.813-814.121
|
|
|
[78]
|
A Review on Optimization of Friction and Wear Parameters (Al Alloy-B4C) Composite Using Taguchi Technique
Applied Mechanics and Materials,
2015
DOI:10.4028/www.scientific.net/AMM.813-814.491
|
|
|
[79]
|
A Study on Dry Sliding Wear Behaviour of Hybrid Metal Matrix Composites at Room Temperature
Applied Mechanics and Materials,
2015
DOI:10.4028/www.scientific.net/AMM.766-767.219
|
|
|
[80]
|
Estimation of Tribological Behavior of Al2024-TiB2 In Situ Composite Using GMDH and ANN
Applied Mechanics and Materials,
2014
DOI:10.4028/www.scientific.net/AMM.592-594.1310
|
|
|
[81]
|
A Review on Sliding Wear Behaviour of Aluminium Matrix Composites with Hybrid Reinforcements for Automotive Applications
Tribology Online,
2014
DOI:10.2474/trol.9.121
|
|
|
[82]
|
Fabrication and Sliding Wear Behaviour of Metal Matrix Composites
Applied Mechanics and Materials,
2014
DOI:10.4028/www.scientific.net/AMM.612.157
|
|
|
[83]
|
Optimization of Tribological Performance of Al-6061T6-15% SiCp-15% Al2O3 Hybrid Metal Matrix Composites Using Taguchi Method & Grey Relational Analysis
Journal of Minerals and Materials Characterization and Engineering,
2014
DOI:10.4236/jmmce.2014.24040
|
|
|
[84]
|
Prediction of Wear Behaviour of Almg1sicu Hybrid MMC Using Taguchi with Grey Rational Analysis
Procedia Engineering,
2014
DOI:10.1016/j.proeng.2014.12.283
|
|
|
[85]
|
On modeling the abrasive wear characteristics of in situ Al–12%Si/TiC composites
Materials & Design,
2013
DOI:10.1016/j.matdes.2013.02.042
|
|
|
[86]
|
Polystyrene grafted carbon black synthesis via in situ solution radical polymerization in ionic liquid
Journal of Polymer Research,
2013
DOI:10.1007/s10965-013-0167-8
|
|
|
[87]
|
A study of sliding wear behaviors of Al-7075 alloy and Al-7075 hybrid composite by response surface methodology analysis
Materials & Design,
2013
DOI:10.1016/j.matdes.2013.02.038
|
|
|
[88]
|
A Statistical Analysis of Optimization of Wear Behaviour of Al- Al2O3 Composites Using Taguchi Technique
Procedia Engineering,
2013
DOI:10.1016/j.proeng.2013.09.174
|
|
|
[89]
|
Optimization of Friction and Wear Behaviour in Hybrid Metal Matrix Composites Using Taguchi Technique
Journal of Minerals and Materials Characterization and Engineering,
2012
DOI:10.4236/jmmce.2012.118063
|
|
|