Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org
"Mechanical Properties of Fly Ash Filled High Density Polyethylene"
written by Iftekhar Ahmad, Prakash A. Mahanwar,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.3, 2010
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Epoxy resin/fly ash composites: Effect of sonication time on thermo-mechanical behavior
[2] Synthesis And Analysis of Grinding Wheel of Fly Ash Grinding Machine
International Engineering Research Journal
[3] Environmental and geotechnical properties of lightweight aggregates made of reused solid wastes
Environmental …, 2023
[4] Waste material fly ash as an alternative filler for elastomers
Polymer Engineering …, 2023
[5] Расчетно-экспериментальные исследования композитных радиационно-защитных материалов с использованием природных минералов и …
2023
[6] Parametric Optimization of Fly Ash Building Bricks Material Composition for Compressive-Tensile Strength Using Taguchi Method
Res Militaris, 2022
[7] Generalised Model of Trends in Mechanical Properties of Toughened Sphere-reinforced Polymer Matrix Composites
Toughened …, 2022
[8] Photo-degradation of renewable biopolymer blended with thermoplastic high density polyethylene (HDPE)
2022
[9] Використання гумінових кислот з бурого вугілля при отриманні полімерів
2022
[10] AFM Measurements and Testing Properties of HDPE and PBT Composites with Fillers in the Form of Montmorillonite and Aluminum Hydroxide
Materials, 2022
[11] Filled Polymer Composites
Thermoplastic Polymer Composites: Processing …, 2022
[12] Mechanical, electrical and thermal properties of nylon-66/flyash composites: Effect of flyash
Organic Polymer …, 2022
[13] DESIGN AND STUDY OF HYDROGELS AND BIOPOLYMERS MODIFIED BY HUMIC ACIDS
Publishing House “ …, 2022
[14] Mechanical Properties of Recycled High-Density Polyethylene, Rice Husk Ash, and Fly Ash Composite Mixture
Journal of Innovation and …, 2022
[15] Experimental Investigation and Comparative Analysis of Aluminium Hybrid Metal Matrix Composites Reinforced with Silicon Nitride, Eggshell and Magnesium
Materials, 2022
[16] Effective Utilization of Thermal Power Plant Waste Fly Ash for Value Addition of Plastic Products: A Conceptual Use of Fly Ash in Polymeric Materials
Green Chemistry for the …, 2022
[17] DEVELOPMENT OF FIRE RETARDANT BIOCOMPOSITE ROOFING SHINGLES FROM RECOVERED POLYMER WASTE
European Journal of Engineering and Technology, 2021
[18] Effect of Filler Particle Size on the Recyclability of Fly Ash Filled HDPE Composites. Polymers 2021, 13, 2836
2021
[19] Mechanical Performance of High-Density Polyethylene (HDPE) Composites Containing Quarry Dust Filler
IOP Conference Series: Earth …, 2021
[20] Comparative Study on Creep Rate Property of Coconut Shell Filler in Selected Thermoplastic Polymer Composites
World Scientific …, 2021
[21] Fly ash-reinforced polyvinyl chloride composites
Handbook of Fly Ash, 2021
[22] Potential composite materials based on polyethylene and yellow phosphorus slag: preparation and characterisation
Plastics, Rubber and …, 2021
[23] Mechanical Properties, Morphology and Elemental Composition of composites produced from Acrylonitrile-Butadiene-Styrene Thermoplastics Incorporated with Cow …
World Scientific …, 2021
[24] A systematic review of research on the longitudinal consequences of workplace bullying and the mechanisms involved
Aggression and violent behavior, 2021
[25] Effect of Filler Particle Size on the Recyclability of Fly Ash Filled HDPE Composites
Polymers, 2021
[26] Investigation of the Mechanical Behavior of the Oil Shale Ash Filled Chlorinated Polyvinyl Chloride Composite Material
International Journal of Composite Materials, 2021
[27] Recent developments in fire retardant glass fibre reinforced epoxy composite and geopolymer as a potential fire-retardant material: A review
2021
[28] Poly (ethylene terephthalate) composite material with modified fly ash filler
2021
[29] Coal as a Filler in Polymer Composites: A Review
2021
[30] Poly(ethylene terephthalate) composite material with modified fly ash filler
Magazine of Civil Engineering, 2021
[31] Tensile Test Of Fly Ash-Polypropylene Hybrid Composite Via Ansys Simulation
2020
[32] An experimental study on fly ash with lime and gypsum for quality improvement in pavement subgrade materials
2020
[33] Effect of waste fillers addition on properties of high-density polyethylene composites: mechanical properties, burning rate, and water absorption
2020
[34] The Effect of Fiber Sizes on Mechanical Properties of Millet Husk (Pennisetum glaucum) Fiber Filled High Density Polyethylene Composites
2020
[35] Characterization and utilization of coal fly ash: a review
2020
[36] Effect of Some Fillers on The Polyethylene Properties.
International Journal of Pharmaceutical …, 2020
[37] Mechanical Properties of Coal Ash Particle-Reinforced Recycled Plastic-Based Composites for Sustainable Railway Sleepers
2020
[38] AJ Csian OURNALOF HEMISTRY AJ Csian OURNALOF HEMISTRY
2019
[39] Mechanical and electrical properties of bismuth filled high-density polyethylene composites
2019
[40] Leaching Behaviour of Fly Ash: A Review.
2019
[41] THE EFFECT OF PALM KERNEL SHELL AS FILLER ON THE PHYSICO-MECHANICAL PROPERTIES IN POLYMERIC MATRICES COMPOSITES
2019
[42] Critical and Rare Earth Elements: Recovery from Secondary Resources
2019
[43] THE EFFECT OF COW HORN AS FILLER ON THE PHYSICO-MECHANICAL PROPERTIES IN POLYMERIC MATRICES COMPOSITES
2019
[44] Leaching Behaviour of Fly Ash: A Review
2019
[45] MECHANICAL AND ELECTRICAL PROPERTIES OF BISMUTH FILLED HIGH DENSITY POLYETHYLENE COMPOSITES
2019
[46] مقارنة بعض الخواص الميكانيكية لخلائط البولي إيثيلين‎
2019
[47] Structure and Properties of Epoxy/Fly Ash System: Influence of Filler Content and Surface Modification
2019
[48] Tensile Modulus of Film Stacked Palm Fibers-LDPE Sheet Composites
2019
[49] Recovery of Rare Earth Elements from Coal Fly Ash: A Review
2019
[50] A brief review on fly ash and its use in surface engineering
AIP Conference Proceedings, 2018
[51] The effect of particle size of fly ash (FA) on the interfacial interaction and performance of PVC/FA composites
Journal of Vinyl and Additive Technology, 2018
[52] Environmental assessment and mechanical properties of acrylonitrile butadiene styrene (ABS) reinforced with fly ash filler
AIP Conference Proceedings, 2018
[53] Investigation of properties of molded parts made of polyethylene with addition of ASH from bituminous coal
Composites Theory and Practice, 2018
[54] Composite material based on the polyethylene terephthalate polymer and modified fly ash filler
2018
[55] Study on Tensile Behavior of Fly Ash Reinforced Hybrid Polymer Matrix Composite
2018
[56] Reinforcement of lime ash particles in LDPE.
2018
[57] Υβριδικά συστήματα πολυμερικής μήτρας με μικρο-και νανο-πληρωτές άνθρακα
2018
[58] Study the effect of the adding of Ash of Palm Fronds on the Mechanical Properties for High Density Polyethylene (HDPE)
2018
[59] Improvement of Tensile Properties of Recycled Low-Density Polyethylene by Incorporation of Calcium Carbonate Particles
2018
[60] Reinforcement of Lime Ash Particles in LDPE
2018
[61] Preparation and characterization of thermoplastic starch composites with fly ash modified by planetary ball milling
Carbohydrate Polymers, 2018
[62] Evaluation of Ohio Coal as Filler Material for Thermoplastic Composites
Dissertation, Ohio University, 2017
[63] Effect of Accelerated Weathering on the Compressive Strength for PMMA Nano Composites Used in Dental Applications. pdf
Engineering and Techology Journal, 2017
[64] Effect on Mechanical Properties of Epoxy Hybrid Composites Modified with Titanium Oxide (TiO2) and Silicon Carbide (SiC)
2017
[65] Effect of Thermal Treatment on Mechanical Properties Rice Husk Ash Filled Tapioca Starch Composite
2017
[66] Effect of Accelerated Weathering on the Compressive Strength for PMMA Nano Composites and PMMA Hybrids Nano Composites Used in Dental Applications
Engineering and Technology Journal, 2017
[67] Natural Rubber Modification For Upper Layer Of Rubberized Asphalt Paving Block AS Shock Absorber
2017
[68] Recycling of Fly Ash as an Energy Efficient Building Material: A Sustainable Approach
Key Engineering Materials, 2016
[69] EFFECT OF FLY ASH FILLER QUANTITY ON ELECTRICAL PROPERTIES OF SILICONE RUBBER INSULATOR MATERIAL
ARPN Journal of Engineering and Applied Sciences, 2016
[70] Preparation, mechanical properties and fracture of the optimal surface modified alumina silicate based ceramic particles reinforced polymer composites
2016
[71] General model for comparative tensile mechanical properties of composites fabricated from fly ash and virgin/recycled high‐density polyethylene
Polymer Engineering & Science, 2016
[72] Design and Analysis of Grinding Wheel of Fly Ash Grinding Machine
International Journal of Science, Engineering and Technology Research, 2016
[73] Effect of Fly-Ash on Thermal & Mechanical Properties of Polystyrene Fly-Ash Composites
International Journal for Scientific Research & Development, 2016
[74] Assessment of the Use of Steel Slag and/or Air Pollution Control Devices Dust in theManufacturing of Fly Ash Bricks/Blocks
2015
[75] Effect of Oil Palm Ash on the Properties of Polypropylene/Recycled Natural Rubber Gloves/Oil Palm Ash Composites
BioResources, 2015
[76] Effect of Particle Size and Concentration of Fly Ash on Mechanical Properties of Polyphenylene Oxide Composites
2015
[77] Property evaluation of nanostructured fly ash-reinforced acrylonitrile butadiene styrene nanocomposites
Journal of Thermoplastic Composite Materials, 2015
[78] A Review Study of Managed Disposal of Fly Ash
2015
[79] Effect of Particle Size and Concentration of Fly Ash on Properties of Polytrimethylene Terepthalate
International Conference on Chemical, Metallurgy and Material Science Engineering , 2015
[80] LUẬN ÁN TIẾN SĨ HÓA HỌC
2015
[81] Mechanical and thermal properties of fly ash filled ABS
2014
[82] Effect of Fiber Loading on the Mechanical Properties of Millet Husk Filled High Density Polyethylene Composites.
Applied Mechanics and Materials, 2014
[83] Mechanical & thermal properties of fly ash filled ABS
2014
[84] Study of Mechanical Properties and Characterization of the Composites Made From Oyster Shell Crystals, Barytes Along With Other Filler Materials
Journal of Mechanical Engineering, 2014
[85] Rice Husk Silica-Efficient Bio Filler in High Density Polyethylene
PMS Begum, R Joseph, AR Jose - rspublication.com, 2014
[86] Structural and Mechanical Characterization of Sustainable Composites Based on Recycled and Stabilized Fly Ash
Materials, 2014
[87] Evaluation of properties of industrial waste filled polymer composites for automobile applications
Materials Science and Technology , 2014
[88] Studies on Mechanical Properties of Fly Ash Filled PPO Composite with Coupling Agent
2014
[89] Characterization of LDPE Reinforced with Calcium Carbonate—Fly Ash Hybrid Filler
Journal of Minerals and Materials Characterization and Engineering, 2014
[90] Review of Agro Waste Plastic Composites Production
Journal of Minerals and Materials Characterization and Engineering, 2013
[91] Disposal and Utilization of Fly Ash to Protect the Environment
International Journal of Innovative Research in Science …, 2013
[92] Morphology and Mechanical Properties of HDPE/Bio-polymer as Compounding Materials
Advanced Materials Research, 2013
[93] Enhanced properties of fly ash–reinforced unsaturated polyester composites
International Journal of Materials Engineering Innovation, 2013
[94] Biopolymer-based thermoplastic mixture for producing solid biodegradable shaped bodies and its photo degradation stability
IOP Conference Series: Materials Science and Engineering. Vol. 50. No. 1. IOP Publishing, 2013
[95] Fundamental Technique of Pre-blending of Bio-matrix with Commercial HDPE
Applied Mechanics and Materials, 2013
[96] Preparation and Property Evaluation of Aluminium alloy (6061) Reinforced with Bottom Ash Particulate composite (ALBAP Composite)
International Journal of Innovative Research in Science, Engineering and Technology, 2013
[97] THE INFLUENCE OF CHEMICAL COMPOSITION OF MIXTURE ON THE MECHANICAL PROPERTIES OF FLY ASH CONCRETE
12th International Multidisciplinary Scientific GeoConference SGEM 2012, 2012
[98] Utilization Of Flyash As Filler In Hdpe/Flyash Polymer Composites: A Review
International Journal of Applied Engineering Research, 2012
[99] Effect of intumescent ammonium polyphosphate (APP) and melamine cyanurate (MC) on the properties of epoxy/glass fiber composites
Composites Part B: Engineering , 2012
[100] Effects of fly ash in composites fabricated by injection molding
Polymer Composites, 2012
[101] Design of municipal solid waste incinerator for use in semi-arid regions
Arid Zone Journal of …, 2012
[102] 粉煤灰改性通用热塑性树脂的研究进展
材料导报, 2011
[103] A Study on the Manufacturing, Mechanical Properties, Abrasion Resistance, and Slow Crack Growth Resistance of the Recycled Polyethylene/Fly Ash Composites
2011
[104] 재생 폴리에틸렌/비산회 분말 충전 복합체 제조와 기계적 물성, 내마모성 및 저속균열성장 저항성에 관한 연구
2011
[105] Halogen free flame retardants for Epoxy substrate in electronic applications
Electronic Manufacturing Technology Symposium (IEMT), 2010 34th IEEE/CPMT International, 2010
[106] Рецензенти: ОБ Гринишин, доктор технічних наук, професор, завідувач кафедри хімічної технології переробки нафти, газу та твердого палива …
[107] Arid Zone Journal of Engineering, Technology and Environment Journal/Arid Zone Journal of Engineering, Technology and Environment/Vol. 16 No. 1 (2020)/Articles …
[108] Sustainability of coconut shell residue as a filler with polystyrene on mechanical and morphology properties and elemental composition of the compisite
[109] The influence of palm fronds ash (PA) on some physical properties of polypropylene (PP).
Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top