Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org
"A Comparative Study on the Microstructures and Mechanical Properties of Al 6061 Alloy and the MMC Al 6061/TiB2/12p"
written by T.V. Christy, N. Murugan, S. Kumar,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.1, 2010
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Mechanical behaviour of aluminium based metal matrix composites reinforced with aluminium oxide
[2] Fabrication and Investigation of Mechanical Behaviors of TiB2 Reinforced AMCs
Transactions of the …, 2024
[3] Effect of B4C Particles on CTE and Thermal Conductivity of Al2214/3Grp/xB4Cp Hybrid Metal Matrix Composites
Journal of The Institution of Engineers (India) …, 2024
[4] Assessment studies and considerations of machining qualities of Al, Ti, SiC and Gr based metal matrix composites
AIP Conference Proceedings, 2024
[5] Crystal Plasticity Modeling to Capture Microstructural Variations in Cold-Sprayed Materials
Crystals, 2024
[6] Microstructure Analysis of Aluminium and Hybrid Reinforced Metal Matrix Al6061/B4C/ZrO2/SiC Composites
2024
[7] Dry Sliding Wear Behaviour of Al6061-Reinforcement with Graphite and Palm Stalk Ash.
… Journal of Vehicle …, 2023
[8] Pengaruh Variasi Media Pendingin Terhadap Kekerasan dan Mikrostruktur Pada Pengecoran Aluminium 6061
Jurnal Teknik Mesin, 2023
[9] Analisis Pengaruh Perlakuan Panas Hasil Pengelasan Gmaw Baja St-40 terhadap Kekerasan dan Struktur Mikro
2023
[10] Study on the mechanical behaviour of metal matrix composites (MMC)
Materials Today: Proceedings, 2023
[11] Surface treatment methods for metal components trays and frames
2023
[12] Development and Testing of Al6061-TiB2 Coconut Shell Ash Reinforced Hybrid Composite
NanoWorld J, 2023
[13] Computational Analysis of Heat Dissipation Strategies in Li-Ion Battery System Using Aluminium 7075 and Aluminium 6061
Hydraulic and Civil …, 2023
[14] Corrosion Studies on Al6061 Alloy Based Hybrid Metal Matrix Composites.
… Journal of Vehicle …, 2023
[15] Parametric Study for Surface Quality on Magnetic Force-assisted Powder-mixed EDM
NanoWorld J, 2023
[16] Pengaruh arus pengelasan terhadap kekuatan tarik dan struktur mikro sambungan las SMAW pada aluminium 6061
2023
[17] Investigations On Mechanical Properties Of Micro Particulates (Al2O3/B4C) Reinforced In Aluminium 7075 Matrix Composite
Journal of Manufacturing Engineering, 2023
[18] Multi-Objective Optimization for the Sustainable Machining of Metal Matrix Composites Using Wire Electric Discharge Machining
Journal of Advanced Manufacturing Systems, 2023
[19] Enhanced Predictive Model for the Mechanical Response of Compression-Loaded Slender Structures. Metals 2023, 13, 1286
2023
[20] Machining Characteristics Evaluation of Al7075–TiB2 In Situ Composite Using Abrasive Water Jet Machining with Varied Test Parameters
Journal of The Institution …, 2023
[21] A Critical Review of Thermal-Barrier Coatings and Critical Examination on Post Heat Treatment
Recent Trends in …, 2023
[22] A Failure Model Coupled with Particle Size Effects
Transactions of the Indian Institute of Metals, 2023
[23] Investigation of mechanical and tribological properties of Al–7 wt.% Si alloy metal matrix composites reinforced with SiC
Silicon, 2023
[24] Mechanical behaviors of Al 6063/TiB2 composites fabricated by stir casting process
Materials Today: Proceedings, 2023
[25] Experimental investigation and optimization of Aluminium 6061 by using various welding process–A review
Materials Today …, 2023
[26] Experimental Investigation of the Mechanical Properties and Tribological Behaviour of Al6061 Enhanced by TiB2 Particles
Transactions of the Indian Institute of Metals, 2023
[27] Evaluation of age-hardening time on the mechanical behavior of Al-Mg-Si (Al 6063) alloy composites reinforced with alumina particles
Journal of Alloys and …, 2023
[28] Consumable pin-friction stir spot welding of Al-Mg-Si alloy via pre-created hole and refilling: Microstructure evolution, defects, and shear/tensile failure load
Proceedings of the Institution of …, 2023
[29] Enhanced Predictive Model for the Mechanical Response of Compression-Loaded Slender Structures
Metals, 2023
[30] Determination of the casting-mold interface heat transfer coefficient for numerically die-casting process depending on different mold temperatures
Journal of Mechanical Science and Technology, 2023
[31] Characterization of Aluminium-Magnesium (Al-Mg) Alloy Reinforced with Strontium (Sr) by Casting Technique
Journal of …, 2023
[32] Characterisation of Al-6061-T6 metal matrix composites reinforced with rice husk ash and Bakelite powder
Materials Today: Proceedings, 2023
[33] Effect of the Hardness in Al/TiB2 MMC with Sand Mould and Permanent Mould
Materials, Design and …, 2023
[34] Exploring the intricacies of machine learning-based optimization of electric discharge machining on squeeze cast TiB2/AA6061 composites: Insights from …
Journal of Materials …, 2023
[35] Study of various types of aluminium alloy grade series and their effect on mechanical performance
Materials Today …, 2023
[36] Characterization of aluminum composite reinforced by silver nanoparticles
Magd, A Mazen, AMM Ibrahim - Scientific reports, 2023
[37] Exploring the potential uses of Aluminium Metal Matrix Composites (AMMCs) as alternatives to steel bar in Reinforced Concrete (RC) structures-A state of art review
Journal of Building Engineering, 2023
[38] Experimental investigation of wear properties of AA6061+ Al2O3 metal matrix composite fabricated by vacuum stir casting method
Materials Today: Proceedings, 2022
[39] On the low-cycle fatigue behavior of aluminum alloys under influence of tensile pre-strain histories and strain ratio
International Journal of …, 2022
[40] Basınçlı döküm prosesinde iki farklı soğutma kanallı kalıpların döküm-kalıp arayüzey ısı transfer katsayısının nümerik olarak incelenmesi
Gümü?hane üniversitesi Fen Bilimleri Dergisi, 2022
[41] ANALISIS PENGARUH PARAMETER PEMESINAN, METODE PENYAYATAN DAN MATERIAL PISAU FRAIS TERHADAP KEKASARAN PERMUKAAN ALUMINIUM …
Jurnal Vokasi Mekanika …, 2022
[42] An Experimental Study of the TiB2-Reinforced AA7075 Manufactured by the Stir Casting
International Journal of Engineering Research & Technology (IJERT), 2022
[43] Investigation on Inorganic Salts K2TiF6 and KBF4 to Develop Nanoparticles Based TiB2 Reinforcement Aluminium Composites
Bioinorganic …, 2022
[44] Investigation on Corrosion Behaviour of Hybrid Aluminium Metal Matrix Composite Welded by Friction Stir Welding
Materials Today …, 2022
[45] Computational simulation of IC engine cooling using different materials for different shapes of fins: a comparative study
International Journal of Ambient …, 2022
[46] Synthesis of Fe 3 O 4–aluminium matrix composites: mechanical and corrosion characteristics
Int J Cast Met …, 2022
[47] Experimental Investigation of Magnetic Force-assisted Powder-mixed EDM for Aluminium Based Metal Matrix Composite
2022 IEEE International Conference …, 2022
[48] Analisis Pengaruh Parameter Pemesinan, Metode Penyayatan dan Material Pisau Frais terhadap Kekasaran Permukaan Aluminium 6061 pada Proses End Milling …
2022
[49] Evaluation of Dissimilar Grade Aluminium Alloy-Tailored Blanks Fabricated by FSW
… and Compensation of …, 2022
[50] Influence of Cold Extrusion on Mechanical Properties of In-Situ Formed MMC
… and Advances in …, 2022
[51] Effect of Post-Welding Heat Treatment on Springback Pattern of AA6061 TWBs
… and Compensation of …, 2022
[52] Metal Matrix Composites An Overview
Toughened Composites, 2022
[53] Effect of tool path strategy and tooltip profile on geometrical feature and surface quality of Al-6061 alloy during deformation machining in bending mode
Advances in Materials …, 2022
[54] Effect of pin geometry and orientation on friction and wear behavior of nickel-coated EN8 steel pin and Al6061 alloy disc pair
advances in materials …, 2022
[55] An Investigation into the Effect of Vacuum Conditions on the Filling Analysis of the Pressure Casting Process
International Journal of Metalcasting, 2022
[56] Manufacturing of (Al–10Zn)/TiB2 in-situ nanocomposites by reactive liquid metallurgy and hot-extrusion for enhanced interfacial bonding and mechanical properties
Materials Science and …, 2022
[57] Investigation of Microstructure and Mechanical Behavior of Al/SiC/CNT Surface Composite Fabricated by Friction Stir Processing
Journal of Solid and Fluid …, 2022
[58] Investigation of the Mechanical Behavior of Synthesized Al6061/TiO2 Microcomposites Using an Innovative Stir Casting Method
Mawla… - Nanomaterials, 2022
[59] Optimization of 1U nanosatellite on the basis of strength and weight using different Materials: A numerical approach
Materials Today: Proceedings, 2022
[60] Effects of heat treatment on the surface quality and improvement in formability of deformation machined products of Al 6061
Journal of …, 2022
[61] Comparative Analysis and Optimization of Thermoelectric Machining of Alumina and Silicon Carbide-Reinforced Aluminum Metal Matrix Composites …
Journal of Advanced …, 2022
[62] Effects of sintering techniques and parameters on microstructure and mechanical properties of Al-15Si-2, 5Cu-0.5 Mg compacts and Al-15Si-2, 5Cu-0.5 Mg/B4C …
Materials Today Communications, 2022
[63] Effect of nitinol on mechanical properties of AA6061 metal matrix composite: A review
Materials Today …, 2021
[64] Characterization of Strength of Aluminum (Al 6063-T6) After Corrosion
… of Experimental & …, 2021
[65] Wear Behavior of Al6061/TiO2 Composites Synthesized by Stir Casting Process
Journal of Advanced Engineering Trends, 2021
[66] DEVELOPMENT AND CHARACTERIZATION OF SUSTAINABLE NOVEL ALUMINUM METAL MATRIX COMPOSITES
2021
[67] Influence of reaction synthesis feedstocks on solidification defect formation and microstructure-property relationships in electron beam freeform fabrication of …
2021
[68] Recent progress in hybrid aluminum composite: manufacturing and application
Metals, 2021
[69] Friction stir welding of AA7075-T6/TiB2 in situ cast composites plates using scarf joint configuration
Advances in Materials and …, 2021
[70] Mechanical properties of titanium diboride particles reinforced aluminum alloy matrix composites: a comprehensive review
Advances in Materials …, 2021
[71] Research Summary on the Processing, Mechanical and Tribological Properties of Aluminium Matrix Composites as Effected by Fly Ash Reinforcement
Crystals, 2021
[72] Synthesis of graphene–aluminium matrix nanocomposites: mechanical and tribological properties
2021
[73] Study of Mechanical and Tribological Behavior of Aluminium Metal Matrix Composite Reinforced with Alumina
2021
[74] Production of Aluminum Matrix Composite Material by Active Carbon Additive
2021
[75] Taguchi Optimization for the Production of Optimized Sustainable Novel Aluminium MMC Using Squeeze Stir Casting Process
2021
[76] A Numerical and Experimental Investigation of the Thermal Behavior of a Permanent Metal Mold with a Conventional Cooling Channel and a New Cooling Channel …
2021
[77] Manufacturing of Al-Li-Si3N4 metal matrix composite for weight reduction
2021
[78] Characterization of physical and mechanical properties of aluminium based composites reinforced with titanium diboride particulates
2021
[79] TOZ METALURJİSİ YÖNTEMİ İLE A356 MATRİSLİ HİBRİT KOMPOZİT MALZEME ÜRETİMİ VE KARAKTERİZASYONU
2021
[80] Fabrication characteristics and mechanical behaviour of aluminium alloy reinforced with Al2O3 and coconut shell particles synthesized by stir casting
2021
[81] Investigation of Corrosion Characteristic of Al6063 Reinforced with Al2O3-CBA by Using Stir Casting
2021
[82] Effect of heat treatment and biosilica on mechanical, wear, and fatigue behavior of Al-T i B 2 in situ metal matrix composite
2021
[83] Particulate Mollusc Shells as Reinforcements for Aluminium Matrix Composites: A Review
2021
[84] Investigation of mechanical & corrosion properties of graphene, R-glass fiber reinforced Aluminium 2024 hybrid composites
2021
[85] Corrosion Behavior of Stir Cast Al6061-B4C/TiB2 Composites Processed by Post-Accumulative Roll Bonding
2021
[86] Recent Progress in Hybrid Aluminum Composite: Manufacturing and Application. Metals 2021, 11, 1919
2021
[87] Effect of Heat Treatment on Microstructure and Hardness of Graphene Nanoplatelets Reinforced Al-Zn-Mg-Cu Alloy Composite
ASME …, 2021
[88] DEVELOPMENT AND CHARACTERIZATION OF Al 6061/MoS2 MMC AND OPTIMIZATION OF PROCESS PARAMETERS FOR MACHINING WITH WEDM
2020
[89] Development and Characterization of Al 6061 Mos2 Mmc and Optimization of Process Parameters for Machining with Wedm
2020
[90] Fabrication and Performance Evaluation Of Mechanical Pproperties of Aluminium Alloy Reinforced With Bio-ashes
2020
[91] DEVELOPMENT AND CHARACTERIZATION OF HYBRID ALUMINIUM METAL MATRIX COMPOSITES FOR FATIGUE/WEAR RESISTANT …
2020
[92] ALUMINUM BASED HYBRID METAL MATRIX COMPOSITES: A REVIEW OF SELECTION PHILOSOPHY AND MECHANICAL PROPERTIES FOR ADVANCED APPLICATIONS
International Journal of Mechanical and Production Engineering Research and Developmen, 2020
[93] Development and Characterization of AI 6061 MoS2 MMC and optimization of process parameters for machining with WEDM
2020
[94] Processing, properties, and microstructure of recycled aluminum alloy composites produced through an optimized stir and squeeze casting processes
2020
[95] Tribological behaviour of aluminum alloy (AA7075) based hybrid composites
2020
[96] Mechanical and Tribological Characterizations of Al/TiB2 composites
2020
[97] Corrosion characterization of Al 6061/Red Mud MMCs in hydrochloric Acid
2020
[98] Enhancement of corrosion behaviour of AL6061-B4C-RHA reinforced hybrid composite
2020
[99] Experimental analysis of aluminium alloy LM25 with carbon in composite material
2020
[100] Influence of silicon carbide and porcelain on tribological performance of Al6061 based hybrid composites
2020
[101] MECHANICAL PROPERTIES AND WEAR CHARACTERIZATION OF AA 6082 ALUMINUM USING INDUSTRIAL WASTE FLY ASH
2020
[102] Investigation of Production and Abrasive Wear Behavior of Functionally Graded TiB 2/Al and TiB 2/Al–4Cu Composites
2020
[103] Effect of B4C and waste porcelain ceramic particulate reinforcements on mechanical and tribological characteristics of high strength AA7075 based hybrid …
2020
[104] Effects of yttrium addition and aging on mechanical properties of AA2024 fabricated through multi-step stir casting
2020
[105] An Effect of EDM on AL6061-5% SiC as stir cast MMC
2020
[106] Investigation of production and abrasive wear behavior of functionally graded TiB2/Al and TiB2/Al–4Cu composites
Transactions of the Indian Institute of Metals, 2020
[107] Mechanical Properties Investigation of Aluminium Silicon Carbide Hybrid Metal Matrix Composites (MMCs)
2020
[108] Experimental investigation on the mechanical properties of LM6 aluminum alloy reinforced with boron carbide and titanium hybrid composites
2019
[109] An investigation on the Corrosion Behavior of Al (Mg-TiFe-SiC) Matrix Composite in Acidic and Chloride Media
2019
[110] DEVELOPMENT OF HIGH STRENGTH TO WEIGHT RATIO ALUMINIUM–MAGNESIUM ALLOY WITH ENHANCED CORROSION RESISTANCE
2019
[111] Tensile Behavior of Aluminium2014 Reinforced with Boron Carbide and Copper Coated Short Basalt Fiber Based Hybrid Composites
2019
[112] Development of aluminium 5056/SiC/bagasse ash hybrid composites using stir casting method
2019
[113] On the multi-parametric optimization of quality characteristics of the hybrid Al-6061 composites fabricated through powder metallurgy
2019
[114] Parameter optimization and characterization of environmental friendly aluminium hybrid metal matrix composites
2019
[115] Effect of Heat Treatment on Hardness of Aluminium Alloy Reinforced with Rice Husk Ash
2019
[116] Alüminyum/biyokütle kaynaklı aktif karbon kompozitlerinin üretimi ve karakterizasyonu
2019
[117] TAGUCHI METHOD PARAMETRIC OPTIMIZATION OF SURFACE ROUGHNESS AND MRR ON HPMMC IN CNC TURNING PHASE
… JOURNAL ENGINEERING AND …, 2019
[118] Surface Characteristics of Drilled Holes in Al–TiB2 Metal Matrix Composites Using Electric Discharge Machine
Advances in Manufacturing Processes, 2019
[119] Investigation of Erosion-Corrosion of Aluminium Alloy Composites: Influence of Slurry Composition and Speed in different mediums
2019
[120] Microstructures and mechanical properties of Ti/Al/Mg/Al/Ti laminates with various rolling reductions
2019
[121] Influence of fly ash on the microstructure and mechanical properties of AA6063 alloy using compocasting technique
2019
[122] Comparison of the Effects of B4C and SiC Reinforcement in Al-Si Matrix Alloys Produced via PM Method
2019
[123] Titanium Diboride Reinforced Aluminium Metal Matrix Composites: A
2019
[124] STUDY ON THE PREPARATION OF NANO-TIB2 REINFORCED AL MATRIX COMPOSITES
2019
[125] ZnO nanoparticles impregnated polymer composite as superhydrophobic anti-corrosive coating for Aluminium-6061 alloy
2019
[126] A comprehensive review on material selection, processing, characterization and applications of aluminium metal matrix composites
2019
[127] EXPERIMENTAL INVESTIGATION ON THE MECHANICAL PROPERTIES OF LM6 ALUMINUM ALLOY REINFORCED WITH BORON CARBIDE AND TITANIUM …
2019
[128] Investigation of High Stress Abrasive and Erosive Wear Behaviour of AA336/TiB2/SiC Ex Situ Composites
2019
[129] Evaluation on Microstructure and Mechanical Behaviour of Al6061-Al2O3-Gr Hybrid Composites
2019
[130] COMPOSITO DE MATRIZ DE ALUMINIO CON CENIZA DE BAGAZO DE CANA DE AZUCAR COMO MATERIAL DE REFUERZO
2019
[131] Aluminum Matrix Composite with Sugarcane Bagasse Ash as Reinforcement Material
2019
[132] Titanium diboride reinforced aluminum composite as a robust material for automobile applications
2019
[133] A review on mechanical and wear characteristics of particulate reinforced Al-alloy based MMC
2019
[134] Mechanical Behavioural Aspects of Al-356 Under the Influence of Boron Carbide and Magnesium
2019
[135] Effects of Reinforcement on Tribological Behaviour of Aluminium Matrix Composites
2019
[136] Optimization of dry sliding wear behaviour of AA6061 (as cast) and AA6061 (HT) aluminium alloy using design of experiment approach
2019
[137] An Investigation of the Mechanical Properties of HybridComposites in Applications of Automotive Industry
2019
[138] A Comparative Study on Sliding wear Behavior of Aluminum Alloy with B4C and SiC Reinforced Metal Matrix Composites
2018
[139] Approach to Determine the Temperature of Aluminum Alloy AL 6061 with Unknown Emissivity using Noncontact Technique
2018
[140] A Study on Mechanical Properties of Aluminum-4.5% Copper Alloy Metal Matrix Composites Reinforced with Alumina Fibers Using Squeeze Casting Process
2018
[141] MULTI-RESPONSE OPTIMISATION OF PROCESS VARIABLES IN SQUEEZE CASTING OF Al 6063-SiC COMPOSITE.
2018
[142] Thermal Analysis of Engine Cylinder in Al/TiB2 and Al/SiC Using ANSYS
2018
[143] COMBINED EFFECTS OF STIR CASTING AND IN-SITU TECHNIQUES IN THE PRODUCTION OF AL 6061-TIB2 METAL MATRIX COMPOSITE WITH …
International Journal of Mechanical Engineering and Technology (IJMET), 2018
[144] Dry-Sliding Wear Analysis of SiC Reinforced AA6063 As-Cast Aluminum Metal Matrix Composites
2018
[145] Effect of TiB2 particle addition on the mechanical properties of Al/TiB2 in situ formed metal matrix composites
2018
[146] Review on wear characteristics of aluminum silicon carbide reinforced with basalt fibre
2018
[147] Enhancing the Mechanical Properties of Metal Matrix Composite by Reinforcing Aluminium 6063 with Sic & Graphite
International Journal of Engineering Research & Technology, 2018
[148] Study of Mechanical and Tribological Characteristics of Aluminium Alloy Reinforced with Sugarcane Bagasse Ash
2018
[149] On the Formation and Distribution of In Situ Synthesized TiB2 Reinforcements in Cast Aluminium Matrix Composites
Journal of Composites Science, 2018
[150] Study of Mechanical and Tribological Characteristics of Aluminium Alloy Reinforced with Rice Husk Ash
2018
[151] Effect of ceramic reinforcement on mechanical properties of aluminum matrix composites produced by stir casting process
Materials Today: Proceedings, 2018
[152] A Comparative Study on Sliding wear Behavior of of Aluminum Alloy with B4C and SiC Reinforced Metal Matrix Composites
International Journal of Science, Engineering and Technology Research (IJSETR), 2018
[153] REINFORCEMENT AND HOT WORKABILITY OF ALUMINIUM ALLOY 7075 PARTICULATE COMPOSITES: A REVIEW
2018
[154] Aluminium Alloy Composites and its Machinability studies; A Review
Materials Today: Proceedings, 2018
[155] Experimental Studies on SiC and Rice Husk Ash Reinforced Al Alloy Composite
International Conference on Research in Mechanical Engineering Sciences (RiMES 2017), 2018
[156] Effect of matrix powder and reinforcement content on tribological behavior of particulate 6061Al-TiB2 composites
Journal of Composite Materials, 2018
[157] Comparative study of aluminium with SiC and TiB2 as reinforce particulate and with FEA
Materials Research Express, 2018
[158] An investigation on the tensile properties and micro-structure of hybrid metal matrix composites
International Journal of Materials and Product Technology, 2018
[159] A novel High-Entropy Alloy-based composite material
Journal of Alloys and Compounds, 2018
[160] A STUDY ON MECHANICAL PROPERTIES OF ALUMINIUM-4.5% COPPER ALLOY METAL MATRIX COMPOSITES REINFORCED WITH ALUMINA FIBERS USING …
2018
[161] Investigation of Flexure Strength of Aluminum Composites Reinforced with Iron Fibers‎
2018
[162] Study on Mechanical Properties of Rice Husk Ash and Fly Ash Reinforcement in Aluminium (Al 6061) Metal Matrix Composites
2018
[163] Optimization of EDM Parameters for Al–TiC Composites Prepared through Powder Metallurgy Route
2018
[164] Design And Fabrication Of Fatigue Test Rig And Preliminary Investigation On Flax Composite Beam
Materials Today: Proceedings, 2018
[165] Mechanical Properties of Al 6061/TiB2 In-Situ Formed Metal Matrix Composites
Journal of Advanced Microscopy Research, 2018
[166] FRICTION-STIR INCREMENTAL SHEET FORMING OF ALUMINUM ALLOY AND METAL MATRIX COMPOSITE
2018
[167] A study on mechanical properties of aluminium-4.5% copper alloy metal matrix composites reinforced with alumina fibers using squeeze casting process
2018
[168] Combined effects of stir casting and in-situ techniques in the production of Al 6061-TiB2 metal matrix composite with different reaction holding times and its …
2018
[169] EVALUATION OF A356-B4C COMPOSITES FABRICATED THRU ULTRASONIC ASSISTED STIR CASTING TECHNIQUE
2018
[170] MECHANICAL AND TRIBOLOGICAL ENHANCEMENT OF AA6063 ALUMINUM ALLOY USING SOLID SPHERE FLY ASH PARTICLES REINFORCEMENT
2018
[171] MULTI-RESPONSE OPTIMISATION OF PROCESS VARIABLES IN SQUEEZE CASTING OF Al 6063-SiC COMPOSITE
2018
[172] Controlling factors in aluminum matrix composites fabrication
Anusandhan, 2018
[173] Processing of aluminium metal matrix composites-a review
Journal of …, 2017
[174] Fabrication of LM25/SiO2 Metal Matrix Composite and Optimization of Wear Process Parameters Using Design of Experiment.
Tribology in industry, 2017
[175] Desarrollo y caracterización de un material compuesto de matriz de aluminio
2017
[176] A COMPARATIVE STUDY ON THE MICROSTRUCTURES AND MECHANICAL PROPERTIES OF ALUMINUM ALLOY AND THE MMC
International Journal of Research Sciences and Advanced Engineering [IJRSAE], 2017
[177] EVALUTION OF MECHANICAL PROPERTIES OF ALUMINIUM/SILICON CARBIDE/FLY ASH BRAKE ROTOR
International Research Journal of Engineering and Technology, 2017
[178] Performance investigation of aluminum 6061 metal matrix composite
Advances in Natural and Applied Sciences, 2017
[179] Effective Hazard Control: An Imperative for Managing Health, Safety and Environmental Challenges of Construction Projects in Nigeria
Journal of Scientific and Engineering Research, 2017
[180] Effect of pouring temperature on A356-TiB2 MMCs cast in sand and permanent moulds by in-situ method
Journal of the Mechanical Behavior of Materials, 2017
[181] Wear behavior of Al-7% Si-0.3% Mg/melon shell ash particulate composites
2017
[182] Investigation of mechanical properties and electrical discharge machining of LM25-RHA metal matrix composite
International Journal of Machining and Machinability of Materials, 2017
[183] Effect of Particle Size on Mechanical Properties of Al-RMp Metal Matrix Composites
2017
[184] STUDIES ON MICROSTRUCTURE, MECHANICAL AND TRIBOLOGICAL PROPERTIES OF 1.2MG-0.70FE-0.40CU REINFORCED WITH GRAPHITE
International Journal oF Engineering Sciences &Management Research, 2017
[185] Investigation of Mechanical Properties on Aluminium Based Hybrid Composites
2017
[186] Effects of Precipitation Hardening on Mechanical Properties of Multistage Stirred Cast AA6063 Composites
2017
[187] Nanocomposites Mechanical and Tribological Properties Using Graphene-Coated-SiC Nanoparticles (GCSiCNP) for Light Weight Applications
Proceedings of the 3rd Pan American Materials Congress, 2017
[188] Failure Response of Simultaneously Pre-Stressed and Laser Irradiated Aluminum Alloys
Applied Sciences, 2017
[189] Effect of Applied Pressure on the Mechanical Properties of 6061 Aluminum Alloy Welded Joints Prepared by Friction Stir Welding
2017
[190] Fabrication of LM25/SiO 2 Metal Matrix Composite and Optimization of Wear Process Parameters Using Design of Experiment.
Tribology in Industry, 2017
[191] Effect of Heat Treatment on Mechanical and Wear Characterization of Coconut Shell Ash and E-glass Fiber Reinforced Aluminum Hybrid Composites
American Journal of Materials Science, 2016
[192] Konsolidacija aluminijskog praha
2016
[193] Study on Mechanical Properties and Microstructure of Aluminum Alloy 63401 Metal Matrix Composite Reinforced with Silicon Carbide Powder
2016
[194] Investigation of micro-structural and mechanical properties of metal matrix composite A359/B 4 C through electromagnetic stir casting
2016
[195] Mechanical Properties and Abrasive Wear Behaviour of Functionally Graded Al-Si12Cu/Al2O3 Metal Matrix Composite
Transactions of the Indian Institute of Metals, 2016
[196] MULTI-OBJECTIVE OPTIMIZATION OF TRIBOLOGICAL PARAMETERS OF HYBRID COMPOSITES USING GREY RELATIONAL ANALYSIS
Int. J. Chem. Sci., 2016
[197] Fabrication, Reinforcement and Characterization of Metal Matrix Composites (MMCs) using Rice Husk Ash and Aluminium Alloy (A-356.2)
International Journal of Scientific & Engineering Research, 2016
[198] Experimental Evaluation of Process Parameters Effect on Mechanical and Machining Properties of Al6061–Cu–SiCp-Reinforced Metal Matrix Composite
Arabian Journal for Science and Engineering, 2016
[199] TRIBOLOGICAL PERFORMANCE OPTIMIZATION OF STIR-CAST AL-TIB^ sub 2^ METAL MATRIX COMPOSITES USING TAGUCHI-BASED GREY RELATION ANALYSIS
Journal of Manufacturing Technology Research, 2016
[200] Study on Mechanical Properties of AMCs produced by Stir Casting Method
KSMPE Autumn Conference 2016, 2016
[201] The Effect of Production Process Parameters on the Tensile Strength of Squeeze Cast Al 2 O 3+ SiC/Al6061 Hybrid Composites
2016
[202] Wear behavior of aluminum matrix hybrid composites fabricated through friction stir welding process
Journal of Iron and Steel Research, International, 2016
[203] In-situ synthesis of aluminum-titanium diboride metal matrix hybrid nanocomposite
ProQuest Dissertations Publishing, 2016
[204] The Effect of Production Process Parameters on the Tensile Strength of Squeeze Cast Al2O3+ SiC/Al6061 Hybrid Composites
2016
[205] Synthesis and characterization of TiB 2 reinforced aluminium matrix composites: a review
2016
[206] Investigation of micro-structural and mechanical properties of metal matrix composite A359/B4C through electromagnetic stir casting
2016 - NISCAIR-CSIR, 2016
[207] TRIBOLOGICAL PERFORMANCE OPTIMIZATION OF STIR-CAST AL-TIB^ sub 2^ METAL MATRIX COMPOSITES USING TAGUCHI-BASED GREY RELATION …
2016
[208] The Effect of Production Process Parameters on the Tensile Strength of Squeeze Cast Al O+ SiC/Al6061 Hybrid Composites
Materials Performance and …, 2016
[209] Cronfa-Swansea University Open Access Repository
Yanes, E Forno, 2016
[210] Aliaje metalice utilizate pentru fabricarea jantelor destinate autovehiculelor rutiere
2015
[211] Stir casting of in–situ Al 6061 TiB2 metal matrix composite synthesized with different reaction holding times
Int. J. Eng. Res. Technol, 2015
[212] A review on the mechanical properties, tribological behavior and the microstructural characterization of Aluminium metal matrix composites (AMMCs)
2015
[213] Determination of Warm Working Temperature Range for In Situ Al m–TiB 2p Composite
2015
[214] MECHANICAL PROPERTIES OF LEAF ASHES REINFORCED ALUMINUM ALLOY METAL MATRIX COMPOSITES
International Journal of Applied Engineering Research, 2015
[215] THERMAL IMAGING-ASSIST HAND
2015
[216] Design and Fabrication of a Stir Casting Furnace Set-Up
Int. Journal of Engineering Research and Applications, 2015
[217] Razvoj titan-magnezij kompozita za biomedicinsku primjenu
2015
[218] Thermal and Electrical Transport Measurements in Metals
2015
[219] Stir Casting of in-situ Al 6061TiB2 Metal Matrix Composite Synthesized with Different Reaction Holding Times
International Journal of Engineering Research & Technology, 2015
[220] Comparative Analysis of Al/TiB2 Metal Matrix Composites in Different Mould Conditions
Journal of Advanced Microscopy Research, 2015
[221] Thermal and Electrical Transport Measurements in Wrought and Cast Aluminum Alloys
2015
[222] Characterization of hybrid aluminum matrix composites for advanced applications–A review
Journal of Materials Research and Technology, 2015
[223] A review on the mechanical properties, tribological behavior and the microstructural characterization of Aluminium metal matrix composites (AMMCs).
International Journal of Scientific & Engineering Research, 2015
[224] Al 6061-TiB 2 Metal Matrix Composite Synthesized with Different Reaction Holding Times by In-Situ Method
International Journal of Composite Materials, 2015
[225] Study on Mechanical Properties of AA6351 Alloy Reinforced with Titanium Di-Boride (TiB2) Composite by In Situ Casting Method
Applied Mechanics and Materials, 2015
[226] Modeling and analysis of process parameters on metal removal rate (MRR) in machining of aluminium titanium diboride (Al-TiB2) composite
Multidiscipline Modeling in Materials and Structures, 2015
[227] Hardness and Wear Characteristics of Hybrid Aluminium Metal Matrix Composites Produced by Stir Casting Technique
Materials Today: Proceedings, 2015
[228] Synthesis and Characterization of TiB2 Reinforced Aluminium Matrix Composites: A Review
Journal of The Institution of Engineers (India): Series D, 2015
[229] Optimization of process parameters during machining of thixoformed A356-5TiB 2 in-situ composite using Design of Experiments
2015
[230] Evaluation of the mechanical properties and corrosion behaviour of coconut shell ash reinforced aluminium (6063) alloy composites
2015
[231] LOAN PERFORMANCE IN SELECTED INDIAN PUBLIC SECTOR BANKS - A COMPARATIVE STUDY
International Journal of Engineering Sciences & Management Research, 2015
[232] Ageing behavior of aluminum hybrid metal matrix composites
2014
[233] EFFECT OF POURING TEMPERATURE AND STIRRING SPEED ON MECHANICAL, MICROSTRUCTURE AND MACHINING PROPERTIES OF AL6061-CU REINFORCED SiCP METAL MATRIX COMPOSITES
2014
[234] Ultrasound assisted low-temperature synthesis of TiB2 and Al3Ti particulates in molten aluminum
2014
[235] Ultrasonic Fatigue Endurance of Aluminum Alloy AISI 6061-T6 on Pre-corroded and Non-corroded Specimens
Metallurgical and Materials Transactions A, 2014
[236] Overview of Aluminium Matrix Composites for Automotive Applications
International Journal of Applied Engineering Research, 2014
[237] An Investigation on the Mechanical Properties of Hybrid Metal Matrix Composites
Procedia Engineering, 2014
[238] Combined Effect of Cold Rolling and Heat Treatment on the Mechanical Properties of Al-Ti Alloy
International Journal of Chemical, Nuclear, Materials and Metallurgical Engineering, 2014
[239] Hybrid Aluminium Metal Matrix Composite Reinforced with SiC and TiB2
Procedia Engineering, 2014
[240] Production characterization and friction stir welding of aluminum 6061 matrix composite reinforced with boron carbide
2014
[241] Production characterization and friction stir welding of aa6061zrb2 in situ composites
2014
[242] Determination of Warm Working Temperature Range for In Situ Alm–TiB2p Composite
Journal of The Institution of Engineers (India): Series D, 2014
[243] Development and testing of Al5083 alloy reinforced by SiC particles
2014
[244] Mechanical and Machining Properties Analysis of Al6061-Cu-Reinforced SiC P Metal Matrix Composite
Journal of Minerals and Materials Characterization and Engineering, 2014
[245] Microstructure and Mechanical Behaviour of Stir-Cast Al-Mg-Sl Alloy Matrix Hybrid Composite Reinforced with Corn Cob Ash and Silicon Carbide
2014
[246] Comparative Study of Composites Reinforced With SiC and TiB2
Procedia Engineering, 2014
[247] Effects of Reinforced Particulates on Properties of Aluminium Metal Matrix Composite
2014
[248] Production and Characterization of Al 6061–TiB2 In–situ Metal Matrix Composite
2014
[249] Corrosion and Tribological Studies of Bamboo Leaf Ash and Alumina Reinforced Al-Mg-Si Alloy Matrix Hybrid Composites in Chloride Medium
Int. J. Electrochem. Sci, 2014
[250] SYNTHESIZING OF IN SITU FORMED Al TiB2 MMC INGOT ALLOWING TiB2 REINFORCEMENT PARTICLES TO GROW TO THE DESIRED SIZE WITH DESIRED …
2014
[251] SYNTHESIZING OF IN SITU FORMED Al TiB2 MMC INGOT ALLOWING TiB2 REINFORCEMENT PARTICLES TO GROW TO THE DESIRED SIZE WITH …
2014
[252] Development and Testing of Metal Matrix Composite by Reinforcement of Sic Particles on Al 5XXX Series Alloy
2014
[253] Mechanical and machining properties analysis of Al6061-Cu-reinforced SiCP metal matrix composite
2014
[254] 采用响应面方法对原位反应铸造制备 Al/TiB_2 金属基复合材料工艺参数进行优化 (英文)
2013
[255] 采用响应面方法对原位反应铸造制备 Al/TiB2 金属基复合材料工艺参数进行优化 (英文)
中国有色金属学报: 英文版, 2013
[256] Mechanical Properties and Corrosion Behaviour of Aluminium Hybrid Composites Reinforced with Silicon Carbide and Bamboo Leaf Ash
Tribology in Industry, 2013
[257] Structure and properties of hybrid composite materials
Russian Metallurgy (Metally), 2013
[258] Effects of Heat Treatment on the Mechanical Properties of Al-4% Ti Alloy
International Journal of Metals, 2013
[259] Studies on effect of heat treatment and water quench age hardening on microstructure, strength, abrasive wear behaviour of Al6061-MWCNT metal matrix composites
2013
[260] Mechanical properties of Magnesium Inoculated 6063 Aluminium Alloy
2013
[261] Design and performance of a compact subthermal neutron source for an Electron Linear Accelerator
Journal of Instrumentation, 2013
[262] Optimization of process parameters for in situ casting of Al/TiB2 composites through response surface methodology
Transactions of Nonferrous Metals Society of China, 2013
[263] Mechanical behaviour of Al-Mg-Si matrix composites reinforced with alumina and bamboo leaf ash
Metallurgical and Materials Engineering, 2013
[264] Preparation and evaluation of mechanical properties of Al-6061 reinforced with graphite and fly ash of seed husk (Honge) particulate metal matrix composite
National Conference on Challenges in Research & Technology in the Coming Decades (CRT 2013), National Conference on Challenges in Research & Technology in the Coming Decades, 2013
[265] Investigations into Effect of Tool Wear on Surface Integrity in Dry Turning of Al6061
Advanced Materials Research, 2013
[266] Fabrication characteristics and mechanical behaviour of rice husk ash–Alumina reinforced Al-Mg-Si alloy matrix hybrid composites
Journal of Materials Research and Technology, 2013
[267] Corrosion and wear behaviour of rice husk ash—Alumina reinforced Al–Mg–Si alloy matrix hybrid composites
Journal of Materials Research and Technology, 2013
[268] Influence of rice husk ash-silicon carbide weight ratios on the mechanical behaviour of Al-Mg-Si alloy matrix hybrid composites
Tribology in industry, 2013
[269] Mechanical behaviour of alumina reinforced AA 6063 metal matrix composites developed by two step-stir casting process
Acta Technica Corviniensis-bulletin of engineering, 2013
[270] Electrical discharge machining of Al-TiB2 with low-frequency vibrating tool
2013
[271] Experimental Investigation of Effect of Gear Milling Parameters of Al-B4C Composite Gears on Surface Roughness
Advanced Materials Research, 2013
[272] Структура и свойства гибридных композиционных материалов
2013
[273] Influence of rice husk ash–silicon carbide weight ratios on the mechanical behaviour of Al-Mg-Si alloy matrix hybrid composites
Tribology in industry, 2013
[274] Research Article Effects of Heat Treatment on the Mechanical Properties of Al-4% Ti Alloy
2013
[275] Influence of Heat Treatment on Strength and Abrasive Wear Behavior of Al6061–MWCNT Metal Matrix Composites
2012
[276] Fabrication and Characterizations of Mechanical Properties of Al-4.5% Cu/10TiC Composite by In-Situ Method
Journal of Minerals and Materials Characterization and Engineering, 2012
[277] Preparation and evaluation of mechanical and wear properties of 6061Al reinforced with graphite particulate metal matrix composite
Materials Science and Engineering (IJMMSE), 2012
[278] Effect of Tool Wear on Tri-Phase CVD Coated Carbide Tools Life while Turning Al6061
Advanced Materials Research, 2012
[279] Fracture toughness (K1C) and tensile properties of as-cast and age-hardened aluminium (6063)–silicon carbide particulate composites
Scientia Iranica, 2012
[280] Effect of Heat Treatment on the Microstructure and Hardening Properties of 6061Aluminum Alloy.
Journal of Applied Sciences Research, 2012
[281] PREPARATION AND EVALUATION OF MECHANICAL AND WEAR PROPERTIES OF Al6061 REINFORCED WITH GRAPHITE AND SiC PARTICULATE METAL MATRIX COMPOSITES
International Journal of Mechanical Engineering and Robotics Research, 2012
[282] Production and age-hardening behavior of borax premixed SiC reinforced Al-Mg-Si alloy composites developed by double stir-casting technique
2012
[283] Characteristic Study of the Al 6061 T-6 used in RTP Primary Cooling System Using Scanning Electron Microscope (SEM)
2011
[284] Corrosion behavior of alumina reinforced aluminium (6063) metal matrix composites
Journal of Minerals and Materials Characterization and Engineering, 2011
[285] Investigations of flank wear, cutting force, and surface roughness in the machining of Al-6061–TiB2 in situ metal matrix composites produced by flux-assisted synthesis
The International Journal of Advanced Manufacturing Technology, 2011
[286] Effect of KBF4 and K2TiF6 on precipitation kinetics of TiB2 in aluminium matrix composite
Journal of Advance Material Letters, 2011
[287] TRIBOLOGY IN BIOMATERIALS DESIGN AND SELECTION
12th International Conference on Tribology, 2011
[288] Wear behavior and its correlation with mechanical properties of TiB2 reinforced aluminium-based composites
Advances in Tribology, 2011
[289] Investigations of flank wear, cutting force, and surface roughness in the machining of Al-6061–TiB2 in situ metal matrix composites produced by flux-assisted …
2011
[290] Investigation of Chemical Composition on Widely Used Al 6061-T6511 Engineered Material: An XRD Analysis Towards Improvement of Mechanical Properties
2010
[291] SERBIATRIB '19
[292] PENGARUH VARIASI TEKANAN DAN TEMPERATUR WARM COMPACTION TERHADAP SIFAT MEKANIK KOMPOSIT Cu-10% Sn DENGAN 0, 7% ZINC …
[293] An inves
[294] Ring Mechanical Engineering (RING ME)
Free SCIRP Newsletters
Copyright © 2006-2025 Scientific Research Publishing Inc. All Rights Reserved.
Top