Development of Aluminium Based Silicon Carbide Particulate Metal Matrix Composite

Journals Menu

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org

Google-based Impact Factor: 1.55
Citations

Journals Menu

"Development of Aluminium Based Silicon Carbide Particulate Metal Matrix Composite"
written by Manoj Singla, D. Deepak Dwivedi, Lakhvir Singh, Vikas Chawla,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.6, 2009

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Mechanical, tribological, and morphological properties of SiC and Gr reinforced Al-0.7 Fe-0.6 Si-0.375 Cr-0.25 Zn based stir-casted hybrid metal matrix …
	Journal of Materials …, 2024

[2]	Characterization of wear rate of Al-12 wt% Si alloy based MMC reinforced with ZrO2 particulates
	Materials Research …, 2024

[3]	Chemical and Thermal Analysis of Fly Ash-Reinforced Aluminum Matrix Composites (AMCs)
	Journal of Composites …, 2024

[4]	Investigation of Mechanical Properties of Al6061–SiC–B4C Composites Produced by Using Stir Casting Method
	Journal of The Institution …, 2024

[5]	Fabrication and characterization of sic, tio2, and pksa hybrid aluminum-based metal matrix composites
	MATEC Web of …, 2024

[6]	Optimization of process variables and characterization of mechanically agitated ceramic‐microsphere reinforced aluminium composite
	Materialwissenschaft …, 2024

[7]	Optimization of 7 Machining Parameter Using Electric Discharge Machining on Fabricated Aluminium-Based Metal Matrix Composite
	Modern Hybrid Machining and …, 2024

[8]	Characterization of microstructural and mechanical properties of hybrid Al/SiC/Al2O3 nanocomposites
	Emergent …, 2024

[9]	Improving thermal conductivity of AlSiC composites by post-oxidization of reaction-bonded silicon carbide preforms
	2024

[10]	Experimental Investigation of Al-6061 Metal Matrix Composite Reinforced with Selenium
	MATEC Web of …, 2024

[11]	Fabrication of aluminium metal matrix composites with Al 6063 reinforced with Al2O3 by two step stir casting method for investigation of mechanical properties
	International …, 2024

[12]	Evaluation of machining behaviours in aluminium metal matrix composite reinforced with polypropylene and silicon carbide
	AIP Conference …, 2023

[13]	Complex eigenvalue analysis of aluminium composites disc brake with damping
	International Journal of …, 2023

[14]	Discover Materials
	2023

[15]	Investigation of the Mechanical Behaviour of Nylon 6-Silicon Carbide (SiC)-Mica Polymer Matrix Composites
	폴리머, 2023

[16]	Microstructure-based Finite Element Analysis of Composites.
	Journal of Mines …, 2023

[17]	Effect of the addition of different concentrations of particulate reinforcement on the density, hardness and wear resistance of aluminum composites produced by …
	The Journal of …, 2023

[18]	Fabrication, mechanical characterization, and ranking of shell ash reinforced Al-7075-based hybrid composites
	2023

[19]	Surrogate analytical models of damage localization in metal matrix composites
	Journal of Composite …, 2023

[20]	Influence of alumina and zinc oxide nanoparticles on microstructure and electro-mechanical properties of aluminum metal matrix composites fabricated by …
	2023

[21]	POTENTIALS OF RICE HUSK ASH UTILISATION AS AN ALTERNATIVE SOURCE OF HYBRID MATERIALS FOR ENGINEERING APPLICATION: A CRITICAL …
	Nigerian Journal of …, 2023

[22]	A preliminary study on the manufacturing aluminum–potassium feldspar metal matrix composite materials
	Materialwissenschaft …, 2023

[23]	Fabrication and Characterization of Al6061-Nano Al 2 O 3 Composites by Ultrasonic Assisted Stir Casting followed by Heat Treatment and Hot Forging
	Archives of Metallurgy …, 2023

[24]	A Review on Fabrication and Mechanical Characterization of Particulate Reinforced Al-7075 Metal Matrix Composites/Hybrid Composites
	Journal of Advanced Research in …, 2023

[25]	Characterization of mechanical properties and machineability parameters of aluminium alloy (Al7075) reinforced with silicon carbide (SiC) and tungsten carbide (WC) …
	AIP Conference Proceedings, 2023

[26]	Effect of Heat Treatment on the Hardness and Electrical Connectivity of an Aluminum Composite Reinforced with Al2O3 Nanoparticles
	Metal Science and Heat Treatment, 2023

[27]	Study the effect of silica particles on mechanical characteristics of aluminium matrix composite prepared by stir casting process
	AIP Conference Proceedings, 2023

[28]	Development of aluminum composite reinforced with selected agricultural residues
	Discover Materials, 2023

[29]	The effects of the size of filler materials on the mechanical properties of aluminium matrix composites
	Materials Today: Proceedings, 2023

[30]	Prediction and optimization of heat treatment effects on hardness and electrical conductivity of aluminum composite reinforced with nano alumina based on …
	2023

[31]	Using electrochemical testing and modeling to assess the efficiency of a water-soluble inhibitor on the corrosion of 6061Al-15 % (v) SiC (p) composite
	Corrosion Reviews, 2023

[32]	Review of Microstructural and Mechanical Properties of Microwave Welding of Lightweight Alloys
	… , and Processing of …, 2023

[33]	Effect of Graphite on Mechanical and Tribological Properties of Al6061/SiC Hybrid Composites.
	Annales de Chimie …, 2023

[34]	Influence of sawdust ash on the microstructural and physicomechanical properties of stir-cast Al6063/SDA matrix composite
	… International Journal of …, 2023

[35]	Investigation of machining characteristics and surface integrity for trim cut WEDM of hybrid metal matrix composite [Al 6061, SiC, and TiB2]
	Journal of Engineering and Applied Science, 2023

[36]	Microstructure Characterization, Mechanical and Wear Behavior of Silicon Carbide and Neem Leaf Powder Reinforced AL7075 Alloy hybrid MMC's.
	Frattura ed Integrità …, 2023

[37]	Stir Cast AA 6351/Graphene/TiB2/Rice Husk Ash composite: Fabrication and assessment of mechanical properties
	Proceedings of the …, 2023

[38]	Periodic advancement of aluminium metal matrix composites: tribo-mechanical performance, corrosion properties, challenges and future
	Advances in Materials …, 2023

[39]	Vacuum stir cast developed aluminium alloy hybrid nanocomposite performance compared with gravity cast: mechanical and tribological characteristics study
	International Journal of …, 2023

[40]	Al2014–alumina aerospace composites: particle size impacts on microstructure, mechanical, fractography, and wear characteristics
	ACS …, 2023

[41]	Synthesis of Al/Mg hybrid nanocomposite by electromagnetic stir cast: characteristics study
	Silicon, 2023

[42]	Investigation and Assessment of Mechanical Properties of Al-Fly Ash
	Recent Trends in Product …, 2023

[43]	Investigating the effects of SiC particles addition and thermal treatment on 90% Al-10% Cu alloy
	2023

[44]	ATIK ALÜMİNYUM MATRİSLİ VE NANO PARTİKÜL TAKVİYELİ KOMPOZİTLERİN MEKANİK ÖZELLİKLERİNİN İNCELENMESİ
	2023

[45]	GRAPHENE REINFORCED ALUMINUM MATRIX COMPOSITES FOR STRUCTURAL APPLICATIONS
	2023

[46]	Влияние термической обработки на твердость и электропроводность алюминиевого композита, армированного наночастицами Al2O3
	Металловедение и термическая …, 2023

[47]	ATIK ALÜMİNYUMDAN METAL MATRİS ÜRETİMİ VE MİKRO PARTİKÜL TAKVİYELİ KOMPOZİTLERDE MEKANİK ÖZELLİKLERİN İNCELENMESİ
	2023

[48]	Investigations into Tribological Behavior of Aluminium Based Silicon Carbide Metal Matrix Composite for Brake Pad
	2022

[49]	SIC/AL COMPOSITE IN AEROSPACE OPTOELECTRONIC
	International Journal for Research Publication and …, 2022

[50]	Effect of ZrB2 Nano-Ingredient on Uncoated Tool Wear for Aluminum Alloys-Based Metal Matrix Composite
	Innovations in Mechanical Engineering, 2022

[51]	Mechanical and wear properties of AL7075 Sic and graphite hybrid composite and optimization using utility additives method
	Hybrid Composites: Processing …, 2022

[52]	Investigation on Mechanical Properties of Aluminum 8011 Metal Matrix Compositewith Titanium Carbide Particulate Reinforcement
	Tehnički vjesnik, 2022

[53]	Investigation of mechanical and tribological behaviour of graphene nanoplatelet reinforced ZE10 magnesium alloy
	2022

[54]	Heat transfer enhancement through perforated fin made by MMC by reinforcing Aluminium with SiC & Graphite and optimization of design parameters using Taguchi …
	Materials Today: Proceedings, 2022

[55]	Predicting impact strength and hardness of aluminium & tungsten carbide nano-composite synthesized by PM
	Materials Today …, 2022

[56]	Investigation on wear behavior of aluminium matrix micro and nanocomposites
	Materials Today: Proceedings, 2022

[57]	Performance of Graphene: A Brief Literature Review on Technologies for Composite Manufacturing
	Handbook of Consumer …, 2022

[58]	Experimental investigation of Al7075 reinforced with WC and SiC metal matrix composites
	Materials Today …, 2022

[59]	A literature survey on effect of various types of reinforcement particles on the mechanical and tribological properties of aluminium alloy matrix hybrid nano composite
	Materials Today: Proceedings, 2022

[60]	Mechanical properties of SiC and neem leaf powder reinforced Al-6063 hybrid metal matrix composites
	Materials Today: Proceedings, 2022

[61]	Morphological and mechanical characterization of the Al-4032/granite powder composites
	Journal of Composite Materials, 2022

[62]	Effect of Ablation Casting on the Microstructural Parameters and Tensile Properties of Aluminum Matrix Composite Reinforced by SiC Particles
	… , Microstructure, and Analysis, 2022

[63]	Mixture DoE: A strategic approach for multi-response optimization of AA1100 metal-matrix hybrid composites
	Materials Today: Proceedings, 2022

[64]	A comprehensive review on the new developments consideration in a stir casting processing of aluminum matrix composites
	Materials Today: Proceedings, 2022

[65]	Microstructural characterization and properties of aluminium 7075/Mo prepared by microwave sintering for high-strength application
	Advances in Materials …, 2022

[66]	Optimization of wear behaviour of Al7075/SiC/Al2O3 MMCs Using statistical method
	Advances in Materials …, 2022

[67]	Development of Al-SiC composite material from rice husk and its parametric assessment
	Materials Research Express, 2022

[68]	Effect of reinforcement on microstructure and mechanical properties of aluminium hybrid composites
	Materials Today: Proceedings, 2022

[69]	Simulation Based Optimization of Geometrical Factors and Process Parameters for a Continuous Caster to Fabricate Aluminum Based MMC
	International Journal of …, 2022

[70]	Effect of different reinforcements on aluminium composite properties–a review
	Materials Today …, 2022

[71]	On this page
	Journal of Nanomaterials, 2022

[72]	Trends in Aluminium Matrix Composite Development
	Crystals, 2022

[73]	Fabrication and Characterization of Aluminum (Al-6061) Matrix Composite Reinforced with Waste Glass for Engineering Applications
	Journal of Nanomaterials, 2022

[74]	Effect of cenosphere and specimen crack lengths on the fracture toughness of Al6061-SiC composites
	Frattura ed Integrità …, 2022

[75]	MECHANICAL AND WEAR CHARACTERIZATION OF ALUMINA/B4C/SiC REINFORCED Al-6061 ALLOY METAL COMPOSITES
	… An International Journal, 2022

[76]	Effects of size and oxidation treatment for SiC particles on the microstructures and mechanical properties of SiCp/Al composites prepared by powder metallurgy
	Materials Science and …, 2022

[77]	A comprehension review of dry sliding wear on aluminum matrix composites
	Materials Today …, 2022

[78]	Experimental investigation and optimization of material removal rate and tool wear in the machining of aluminum-boron carbide (Al-B4C) nanocomposite …
	Advances in Materials Science and …, 2022

[79]	The Role of Tetra Hybrid Reinforcements on the Behavior of Aluminum Metal Matrix Composites.
	Journal of …, 2022

[80]	Experimental Investigation and Prediction Analysis on Granite/SiC Reinforced Al7050 and Al7075 Using Hybrid Deep Neural Network Based Salp Swarm …
	Silicon, 2022

[81]	Tribological behaviour of LM25 hybrid metal matrix composites by using Taguchi's techniques
	Materials Today: Proceedings, 2022

[82]	Effect of solid waste materials on properties of Magnesium matrix composites-A systematic review
	Journal of Magnesium and Alloys, 2022

[83]	Mechanical behaviour of stir cast aluminum matrix composites reinforced with silicon carbide and palm kernel shell ash
	Manufacturing Review, 2022

[84]	Investigating the effect of reinforcing particles size and content on tensile and fatigue properties of heat-treated Al7075-SiC composites fabricated by the stir casting …
	Jom, 2022

[85]	Effect of Heat Treatment on Wear Rate of Al-4.5% wt. Copper Matrix Reinforced with Graphite and Zircon Sand Hybrid Composites
	International Journal of …, 2022

[86]	The Progressive Development of Metal Matrix Composites: From Alloy to Hybrid Composites–A Review
	Metal Matrix Composites, 2022

[87]	Investigation and development of aluminium matrix composite reinforced with silicon carbide using process of stir casting
	Materials Today …, 2022

[88]	A Novel Investigation on Tensile Strength, Compressive strength, Hardness and Corrosion resistance of A16061 Composite with Weight Fractions of 5%, 10% and 15 …
	2022 14th International …, 2022

[89]	Research Article Experimental Investigation and Optimization of Material Removal Rate and Tool Wear in the Machining of Aluminum-Boron Carbide (Al-B4C) …
	parameters, 2022

[90]	Study on Silica Content of Peat Soil and Concrete Reinforced Aluminium AA7075 Chips by Cold Compaction Method: Hardness and Physical Properties
	… and process Plant …, 2022

[91]	Influence of micro boron carbide particles on microstructure, mechanical properties, and dry sliding wear properties of an aluminium Al2214-B4C metal matrix …
	Tribologia-Finnish Journal of Tribology, 2022

[92]	Evaluation of mechanical and dry sliding wear behaviour of Al 2214 aluminium alloy â€“graphite metal matrix composites
	Journal of Mines, Metals and …, 2021

[93]	The Effect of Carbon Concentration on the Amorphization and Properties of Mechanically Alloyed Cobalt-Carbon Alloys
	2021

[94]	Investigation of Mechanical Properties of Si3N4 Reinforced Composites Produced from Aluminum Waste
	Avrupa Bilim ve Teknoloji Dergisi, 2021

[95]	A Review on Vibrational Characteristics of Aluminium (Al) Matrix Composites
	Journal of Huazhong University of Science and Technology, 2021

[96]	Microstructural and tensile behaviour of hybrid MMC Al7075/SiC/B4C produced by mechanical stir casting
	Materials Today: Proceedings, 2021

[97]	Influence of agro-based reinforcements on the properties of aluminum matrix composites: a systematic review
	Journal of Materials Science, 2021

[98]	Effect of Reinforment of Particles on the Mechanical Properties of Al6065-SiC, Al6065-Al2O3, Hybrid Composites by Modified Stir Casting Method
	2021

[99]	Pengaruh Kecepatan Pengadukan pada Proses Stircasting terhadap Sifat Mekanik pada Paduan Aluminium
	2021

[100]	The influence of imperfect interfaces on the measurable effective properties of ceramic composites
	2021

[101]	Experimental analysis and characterization of Mechanical, Physical properties of Aluminium (Al6061) Metal Matrix composite reinforced with SiC and Al2O3 using Stir …
	2021

[102]	Mechanical Behavior in Tungsten Carbide-Reinforced Aluminum Composites
	2021

[103]	Enhancement of mechanical characterization of aluminum alloy with tungsten carbide metal matrix composite by particulate reinforcements
	2021

[104]	Study on Mechanical Properties of AA6061/SiC/B4C Hybrid Nano Metal Matrix Composites
	2021

[105]	Development of Hybrid Nanocomposites by Stir Casting Technique Using Two-Step Mixing
	2021

[106]	Evaluation of mechanical performance on a developed AA 6061matrix-Mg/0.9-Si/0.68 reinforced with B4C based composites
	2021

[107]	Effect of dual reinforced ceramic particles on elevated temperature tribological properties of hybrid aluminium matrix composites
	2021

[108]	Influence of reaction synthesis feedstocks on solidification defect formation and microstructure-property relationships in electron beam freeform fabrication of …
	2021

[109]	The key attributes of processing parameters on semi-solid metal casting: An Overview
	E3S Web of Conferences, 2021

[110]	Micro-structural and mechanical characterization of AA2014/TiB2/Al2O3 hybrid composites
	AIP Conference …, 2021

[111]	Plant Fibers-Based Sustainable Biocomposites: Ancients to Recent Developments
	Handbook of Nanomaterials and …, 2021

[112]	Development and analysis of SiC, TiO2, and Biochar hybrid reinforced aluminium-based metal matrix composite
	Advances in Materials …, 2021

[113]	Fabrication, Characterization and Machining of Al6061 Reinforced with Red Mud Composite
	Journal of Minerals and …, 2021

[114]	Study of stirrer speed and preheat temperature on stir cast aluminium matrix composite materials–A review
	Materials Today: Proceedings, 2021

[115]	Robust design optimisation of constituent mix and WEDM electrical parameters of AA6063/SiC composites
	International Journal of …, 2021

[116]	Recycling for a Sustainable World with Metal Matrix Composites
	Recycling of Plastics, Metals, and …, 2021

[117]	Tribological Behaviour of Al 7075 Alloy Reinforced with Nano-Alumina and Silicon Carbide Particulates
	2021

[118]	Experimental studies of different quenching media on mechanical and wear behavior of Al7075/SiC/Al2O3 hybrid composites
	2021

[119]	A review on metal matrix composite for automobile applications
	2021

[120]	Influence of the fly ash material inoculants on the tensile and impact characteristics of the aluminum AA 5083/7.5 SiC composites
	2021

[121]	Fabrication and Characterization of Al6061 with Boron Carbide Metal Matrix Composites
	2021

[122]	Investigation on Microstructural and Mechanical Properties of Microwave Welded Al6061-SiC-Graphite Hybrid Metal Matrix Composites
	2021

[123]	Investigations on Al 7075/nano-SiC/B4C hybrid reinforcements using liquid casting method
	2021

[124]	Effect of the Parametric Processes in Stir-Casting Technique for Aluminium Based Composite Development: A review
	2021

[125]	Scientific African
	2021

[126]	Evaluation of Mechanical performance on developed AA 6061Matrix-Mg/0.9-Si/0.68 reinforced with B4C based Composites
	Functional Composites and Structures, 2021

[127]	Study of Microstructure and Mechanical Properties of Ball milled Nano-SiC Reinforced Aluminium Matrix Composites
	2021

[128]	Multi-objective optimization of process parameters in dry sliding wear characteristics of Al/sic composites using Taguchi grey relation analysis
	2021

[129]	Influence of micro B 4 C ceramic particles addition on mechanical and wear behavior of aerospace grade Al-Li alloy composites
	2021

[130]	Optimization on Operation Parameters in Reinforced Metal Matrix of AA6066 Composite with HSS and Cu
	2021

[131]	Eggshell and rice husk ash utilization as reinforcement in development of composite material: A review
	2021

[132]	Wear and Friction Behavior of Gr/Sn Solid Lubricated Dual Reinforced AMCs
	2021

[133]	The Prediction of Stress and Strain Behaviors in Composite Gears using FEM
	2021

[134]	Study the Mechanical Behaviour of Al 7075 with Silicon Nitride by Computer Analysis & Stir Casting
	International Journal of Innovative Science and Research Technology, 2021

[135]	Mechanical and microstructural characteristics of Aluminium 6063 Alloy/Palm Kernel shell composites for lightweight applications
	2021

[136]	A Review on the Significance of Hybrid Particulate Reinforcements on the Mechanical and Tribological Properties of Stir-Casted Aluminum Metal Matrix Composites
	2021

[137]	Dry Sliding Wear Study of Solid Lubricants and Sillimanite-Reinforced Aluminum Alloy Composites
	2021

[138]	Synthesis and development of size hybrid nano SiC-Al7075 composites by advanced stir casting
	2021

[139]	Investigating the lubricated sliding wear behaviour of aluminium matrix composite produced by stir-squeeze cast process.
	2021

[140]	Preparation and Experimentation of Graphite and Aluminium Nitride Reinforced Metal Matrix Composite
	2021

[141]	Chemical Data Collections
	2020

[142]	Fabrication and Tribological Characteristics of Al6061-B4C Metal Matrix Composites
	2020

[143]	The comparative study of conventional and ultra-high frequency induction sintering behavior of pure aluminum
	2020

[144]	MECHANICAL AND TRIBOLOGICAL BEHAVIOUR OF AL 7075 HYBRID MNC'S USING STIR CASTING METHOD
	International Journal of Mechanical and Production Engineering Research and Development, 2020

[145]	Mechanical properties of titanium carbide reinforced aluminum metal matrix composites
	2020

[146]	Mechanical and Microstructure Properties of Friction Stir Welding Joints of Aluminum Reinforced with Silicon Carbide Nanoparticles
	International Journal of Engineering Research and Technology, 2020

[147]	Property Evaluation of Hybrid Metal Matrix Composite
	2020

[148]	Study on Mechanical Properties of Al6063 Reinforced with Sic & Tur Husk
	2020

[149]	Cutting temperature prediction model and parametric optimization in turning aluminium matrix composite
	2020

[150]	CHARACTERISATION OF STIR-CAST FERROTITANIUM AND SILICON CARBIDE REINFORCED ALUMINIUM MATRIX COMPOSITES
	2020

[151]	SiC Reinforcement in the Synthesis and Characterization of A356/AL 2 O 3/Sic/Gr Reinforced Composite-Paving a Way for the Next Generation of Aircraft Applications
	2020

[152]	Investigation of SiC and AL2O3–Reinforced with aluminium composites-A review
	2020

[153]	Mechanical properties of aluminium metal matrix composites-A review
	2020

[154]	ОСОБЕННОСТИ ПОЛУЧЕНИЯ НИЗКОНАПОЛНЕННЫХ ДИСПЕРСНО-УПРОЧНЕННЫХ АЛЮМОМАТРИЧНЫХ КОМПОЗИЦИОННЫХ МАТЕРИАЛОВ
	2020

[155]	Mekanik Alaşımlama Metodu ile Üretilen Al-4.5 Cu/SiC Kompozitin Termal ve Mikroyapısal Özelliklerinin İncelenmesi
	2020

[156]	Effects of Reinforcement Ratios and Sintering Temperatures on the Mechanical Properties of Titanium Nitride/Nickel Composites
	2020

[157]	MULTI-RESPONSE OPTIMIZATION OF AA1100 MMC THROUGH MIXTURE DoE
	2020

[158]	Mechanical Properties and Wear Characteristic of (Aluminum-Zinc Oxide) Metal Matrix Composite Prepared Using Stir Casting Process
	2020

[159]	Comparison studies on mechanical and wear behavior of Stir Cast Al-SiC-B4C metal matrix composites
	2020

[160]	Effects of particle size and surface modification of SiC on the wear behavior of high volume fraction Al/SiCp composites
	2020

[161]	Incorporation of SiC Ceramic Nanoparticles into the Aluminum Matrix by a Novel Method: Production of a Metal Matrix Composite
	2020

[162]	Manufacturing techniques for metal matrix composites (MMC): an overview
	2020

[163]	Selective laser melting of aluminium metal-matrix composites and the challenges
	2020

[164]	Automotive industry application of aluminium-based hybrid metal matrix composite
	2020

[165]	Effect of Double and Triple Particle Size Al2O3 Reinforcement on Properties of AMC Prepared by Vacuum Moulding
	2020

[166]	Influence of heat treatment on tribological behavior of Al/ZrO2/fly ash hybrid composite
	2020

[167]	Evaluation of thermal and mechanical properties of Al7475 alloy reinforced with SiC and graphite
	2020

[168]	Thixoforming and Rheo-Die-Casting of A356/SiC Composite
	2020

[169]	Analysis of mechanical and wear properties of Al2O3+ SiC+ B4C/AA5083 hybrid metal matrix composite done by stir casting route
	2020

[170]	Forming behaviour of aluminium matrix nano Al2O3 composites for automotive applications
	2020

[171]	Fabrication and characterization of stir cast Al2024/SiCp metal matrix composite
	2020

[172]	Surface characterization and mechanical behavior of aluminum based metal matrix composite reinforced with nano Al2O3, SiC, TiO2 particles
	2020

[173]	Study and development of aluminium metal matrix composite with SiC using stir casting process
	2020

[174]	Effect of substituting SiC in varying proportions for TiC in Al-5052/TiC/SiC hybrid MMC
	2020

[175]	Biowaste Management: Banana Fiber Utilization for Product Development
	2020

[176]	Processing Methods and Mechanical Properties of Aluminium Matrix Composites
	2020

[177]	Study of age hardening process on Al/SiC/Al2O3 hybrid composite
	2020

[178]	Structure Property Correlation of In Situ Reinforced Al–based Metal Matrix Composite via Stir Casting
	2020

[179]	Characterization of microstructure, mechanical properties and corrosion response of aluminium-based composites fabricated via casting—a review
	2020

[180]	Effect of Sintering Temperature on Microstructure and Mechanical Properties of Aluminium Composites
	2020

[181]	Mechanical and microstructural analysis of Al-Al2O3/B4C hybrid composites
	2020

[182]	Analyzing the Effect of B4C/Al2O3 on the Wear Behavior of Al-6.6 Si-0.4 Mg Alloy Using Response Surface Methodology
	2020

[183]	Effects of stirring duration and casting temperature in ultrasonic assisted stir casting of Al A356 matrix composites
	2020

[184]	Experimental Investigations on Microstructure, Mechanical and Wear Behavior Under Dry Sliding of Al6061 with Particulate-Reinforced SiC and TiB2 Metal Matrix …
	2020

[185]	An investigation on the impact of SiC/B4C on the mechanical properties of Al-6.6 Si-0.4 Mg alloy
	Materials Today …, 2020

[186]	Wear Behaviour Analysis of Silicon Carbide based Aluminium Metal Matrix Composites
	2020

[187]	Vibration and Acoustic Characteristics of Aluminium Silicon Carbide Metal Matrix Composite Under Uniform and Non Uniform Thermal Environment
	2020

[188]	Using Entropy Weight and Over All Evaluation Criteria Optimize the Parameters in EDM of Al–20 Wt.% SICP MMC
	2020

[189]	PREPARATION AND INVESTIGATION OF ALUMINIUM-ALUMINA METAL MATRIX COMPOSITE
	2020

[190]	Effect of Double and Triple Particle Size Al 2 O 3 Reinforcement on Properties of AMC Prepared by Vacuum Moulding
	2020

[191]	Desarrollo y evaluación de películas de alcohol polivinílico y óxidos de grafeno termorreducidos (PVA-TRGOS) para su potencial uso como vehículo de inclusión en …
	2020

[192]	МЕТАЛЛИЗАЦИЯ СИСТЕМОЙ TI-CU МЕТАЛЛОМАТРИЧНОГО КОМПОЗИТА ALSIC
	2020

[193]	Mechanical & Tribological Behaviors of Aluminium Metal Matrix/Hybrid Metal Matrix Composites: A Review
	JOURNAL OF CRITICAL REVIEWS, 2020

[194]	Fabrication and Study of Effect of Sugarcane Bagasse Ash Secondary Reinforcement on Aluminum Magnesium Composite
	2020

[195]	Materials Today: Proceedings
	2020

[196]	Investigation of Thermal and Microstructural Properties of Al-4.5 Cu/SiC Composite Produced by Mechanical Alloying Method
	… University Journal of Science Part C …, 2020

[197]	Evaluation on Microstructure and Mechanical Behaviour of Al6061-Al2O3-Gr Hybrid Composites
	Open Journal of …, 2019

[198]	FABRICATION AND STUDY OF EFFECT OF COCONUT SHELL ASH SECONDARY REINFORCEMENT ON ALUMINIUM SILICON CARBIDE COMPOSITE
	2019

[199]	Experimental Evaluation of Al-Zn-Al2O3 Composite on Piston Analysis by CAE Tools.
	Mechanics & Mechanical …, 2019

[200]	Experimental Evaluation of Al-Zn-AlO Composite on Piston Analysis by CAE Tools
	Mechanics and Mechanical Engineering, 2019

[201]	Experimental Investigations on Microstructure, Mechanical and Wear Behavior Under Dry Sliding of Al6061
	2019

[202]	An investigation of the mechanical properties of hybridcomposites in applications of automotive industry
	Materials Today …, 2019

[203]	Evaluation of hardness and impact strength of aluminium alloy (LM6)–soda–lime composite
	2019

[204]	Coefficient of thermal expansion (CTE) study in metal matrix composite of CuSiC vs AlSiC
	2019

[205]	Study on mechanical properties of Metal Matrix Composites (MMCs) Al-Cu-Mg/SiCp with Powder Metallurgy
	2019

[206]	Review on Aluminium Silicon Carbide Metal Matrix Composite
	International Journal of Engineering Research & Technology (IJERT), 2019

[207]	Effect of Heat Treatment on Wear behavior of Hybrid Aluminum Metal Matrix Composites.
	2019

[208]	Fabrication and Properties of Aluminium Matrix Hybrid Nanocomposites By Stir Casting
	International Journal of Recent Technology and Engineering, 2019

[209]	Mechanical characteristics of Al-Al2O3-SiC metal matrix composites made by stir casting technique
	2019

[210]	Investigation of mechanical and wear behavior of Al based SiC reinforce metal matrix composite
	2019

[211]	DEVELOPMENT COMPARISONS OF AL-SiC MMC USING STIR CASTING PROCESS AND POWDER METALLURGY PROCESS FOR AUTOMOTIVE INDUSTRIES
	International Journal of Mechanical and Production Engineering Research and Development, 2019

[212]	Effects of silicon carbide contents on microstructure and mechanical properties of spark plasma–sintered titanium-based metal matrix
	2019

[213]	Review on effect of process parameter on Mechanical properties of Al-based MMC
	2019

[214]	PREPARATION OF AMCs BY STIR CASTING METHOD: A REVIEW
	2019

[215]	Study of mechanical properties of stir casted Al7075/SiCp composites after thermomechanical treatment
	2019

[216]	Effects of variations in the addition of SiCp filler to corrosion rate of metal matrix composites (MMCs) Al-Cu-Mg/SiCp
	2019

[217]	Comparison of Tensile Properties of Varying Size Boron Carbide Particulates Reinforced Al7475 Alloy Composites
	Science, Technology and Development, 2019

[218]	Preparation and Characterization of AA6061 Aluminum Alloy Composite Reinforced With Different Contents of Blast-Furnace Slag by Powder Metalurgy
	MRS Advances, 2019

[219]	MICROSTRUCTURE STUDIES AND MECHANICAL CHARACTERISATION OF T6 HEAT TREATED ALUMINIUM AND COPPER BASED ALLOY REINFORCED WITH ZIRCON AND GRAPHITE COMPOSITE
	Journal of Engineering Science and Technology, 2019

[220]	Microstructure and Compressive Behavior of Al–Y2O3 Nanocomposites Prepared by Microwave-Assisted Mechanical Alloying
	2019

[221]	Material characterization of SiC and Al2O3–reinforced hybrid aluminum metal matrix composites on wear behavior
	2019

[222]	PRODUCTION OF AA5754/B4C COMPOSITE MATERIALS BY THE SEMI-SOLID STIRRING METHOD
	2019

[223]	Green Design of Novel Metal Matrix Composites
	2019

[224]	Characterization and mechanical response of novel Al-(Mg–TiFe–SiC) metal matrix composites developed by stir casting technique
	2019

[225]	Investigation of Hardness and Tribological Behaviour of Aluminium Alloy LM30 Reinforced with Silicon Carbide, Boron Carbide and Graphite
	2019

[226]	Development and properties evaluation of marble dust reinforced ZA-27 alloy composites for ball bearing application
	2019

[227]	Analysis on Mechanical Behaviour of Binary and Hybrid Al2014 Metal Matrix Composites
	2019

[228]	Conventional stir casting versus ultrasonic assisted stir casting process: Mechanical and physical characteristics of AMCs
	2019

[229]	Silicon Carbide Effect as Reinforcement on Aluminium Metal Matrix Composite
	2019

[230]	Experimental Evaluation of Al-Zn-Al2O3 Composite on Piston Analysis by CAE Tools
	2019

[231]	Development and Property Evaluation of Aluminium Alloy Reinforced with Fly-Ash
	Asian Journal of Applied Science and Technology (AJAST), 2019

[232]	DEVELOPMENT AND CHARACTERIZATION OF HYBRID ALUMINUM METAL MATRIX COMPOSITES
	2019

[233]	Study of Hardness of Al-Sic Composites using stir casting Method.
	2019

[234]	Parameter optimization and characterization of environmental friendly aluminium hybrid metal matrix composites
	2019

[235]	Electro-mechanical, microstructure and corrosion properties of 85Al6063-15CFBP alloy for advance applications
	2019

[236]	Dry sliding wear behaviour of Al 7075/Al2O3/B4C composites using mathematical modelling and statistical analysis
	2019

[237]	FORMABILITY CHARACTERISTICS OF Al-Cu-TiC COMPOSITE MATERIAL DURING COLD UPSETTING
	2019

[238]	Production and characterization of SiC reinforced aluminum alloy matrix composites from waste beverages cans
	2019

[239]	Enhancement of toughness of SiC through compositing SiC-Al interpenetrating phase composites
	2019

[240]	Effect of SiC content on microstructure, mechanical and electrical properties of sintered Al-20Si-xSiC nanocomposites fabricated by mechanical alloying
	2019

[241]	Development Of Silicon Carbide Particle Reinforced Aluminium 6101 Metal Matrix Composite Using Two-Step Stir Casting
	2019

[242]	Silicon carbide (SiC) effect on mechanical properties and corrosion rates on composite Al/SiC and Al-Cu/SiC
	2019

[243]	OPTIMIZATION AND ANALYSIS OF DRY SLIDING WEAR BEHAVIOR OF STIR CASTED AlSi6Cu4–TiO2 COMPOSITE USING CENTRAL COMPOSITE DESIGN
	2019

[244]	Evaluation of Mechanical and Metallurgical Properties on Aluminium Hybrid Metal Matrix Composites
	2019

[245]	A Review on Metal Matrix Hybrid Composite Al/SiC/Gr
	International Journal of Electro Mechanics and Mechanical Behaviour, 2019

[246]	A LITERATURE REVIEW ON ALUMINIUM-7075 METAL MATRIX COMPOSITES
	2019

[247]	Processing and characterization of AA2024/Al2O3/SiC reinforces hybrid composites using squeeze casting technique
	Iranian Journal of Materials Science and Engineering, 2019

[248]	PRODUCTION OF AA7075/B4C COMPOSITE MATERIALS BY SEMI-SOLID STIRRING METHOD
	2019

[249]	Study of Tribological Behaviour of AA6351/SiC/Gr Hybrid Metal Matrix Composite using Taguchi Technique.
	2019

[250]	DEVELOPMENT COMPARISONS OF AL-SiC MMC USING STIR CASTING PROCESS AND POWDER METALLURGY PROCESS FOR AUTOMOTIVE …
	2019

[251]	Study of tribological behaviour of AA6351/SIC/Gr hybrid metal matrix composite using Taguchi technique
	2019

[252]	MICROSTRUCTURE STUDIES AND MECHANICAL CHARACTERISATION OF T6 HEAT TREATED ALUMINIUM AND COPPER BASED ALLOY REINFORCED …
	2019

[253]	Hafif Metal Ana Fazlı Kompozit Malzeme Üretim Sisteminin Tasarım, İmalat Ve Performansının İncelenmesi
	GAZ? üN?VERS?TES? FEN B?L?MLER? DERG?S? Part C: TASARIM ve TEKNOLOJ?, 2019

[254]	Effect of CCBP doping on the multifunctional Al-0.5 Mg-15CCBP superalloy using liquid metallurgy process for advanced application
	2019

[255]	EFFECT OF ADDITION OF SIC AND AL2O3 ON WEAR BEHAVIOR OF HYBRID ALUMINUM METAL MATRIX COMPOSITES.
	2019

[256]	Mechanical properties of Al–Si–SiC composites
	2019

[257]	Development of cast aluminum metal matrix composites by additional processes
	2019

[258]	Pulsed TIG Welding of Al–SiC Composite: Welding Parameter Optimization
	… of Aluminum and Its …, 2018

[259]	Sintering Behavior: Al–SiC Compacts in Different Atmospheres
	Encyclopedia of Aluminum and Its Alloys, Two …, 2018

[260]	An Estimation Study on Fatigue transition Life of Nanocomposites Reinforced by AL2O3
	2018

[261]	Influence of T6-heat treatment on mechanical properties of Al7075 alloy reinforced with Cenosphere
	2018

[262]	Investigation of Mechanical Properties of SiC and Al2O3 Reinforcement in Aluminum Metal Matrix Composite Produced by Mechanical Stirring Promoted with Ultrasonic Stirring Application
	19th International Metallurgy & Materials Congress, 2018

[263]	Enhancing the Mechanical Properties of Metal Matrix Composite by Reinforcing Aluminium 6063 with Sic & Graphite
	International Journal of Engineering Research & Technology, 2018

[264]	Characterization of Aluminium Alloy 6063 Hybrid Metal Matrix Composite by Using Stir Casting Method
	International Journal of Mechanical, Industrial and Aerospace Sciences, 2018

[265]	Effect of machining parameters on surface roughness while turning metal matrix composites-an experimental approach
	2018

[266]	Mechanical Survey and Morphological Review of LM22 composite Coated with Multi Wall Carbon Nano Tubes
	2018

[267]	Mathematical Modeling of dry Sliding Wear Behaviour of Stir–Squeeze cast Aluminium Matrix Composite
	2018

[268]	Synthesis of aluminum-based Metal Matrix Composites (MMC) and experimental study of their properties
	2018

[269]	Synthesis, Consolidation and Modelling Study of AA2014-TiB2 Composite Prepared by Powder Metallurgy (P/M) Method
	Materials Science Forum, 2018

[270]	Influence of Solutionising and Aging Treatments on Mechanical Behavior of Stir-Cast Eutectoid Steel Powder Reinforced Al 7075 Metal Matrix Composites
	2018

[271]	A Review on Fabrication and Mechanical Characterization of Aluminium Metal Matrix Composites
	2018

[272]	Graphical Representations of Experimental and ANN Predicted Data for Mechanical and Electrical Properties of AlSiC Composite Prepared by Stir Casting Method
	IOP Conference Series: Materials Science and Engineering, 2018

[273]	Preliminary Evaluations on Development of Recycled Porcelain Reinforced LM-26/Al-Si10Cu3Mg1 Alloy for Piston Materials
	Silicon, 2018

[274]	Zinc-aluminum (ZA-27)-based metal matrix composites: a review article of synthesis, reinforcement, microstructural, mechanical, and corrosion characteristics
	The International Journal of Advanced Manufacturing Technology, 2018

[275]	STUDY ON MECHANICAL BEHAVIOR OF BORON CARBIDE AND RICE HUSK ASH BASED ALUMINIUM ALLOY 6061 HYBRID COMPOSITE
	International Journal of Technical Innovation in Modern Engineering & Science, 2018

[276]	Interactive study on phase morphology and mechanical characteristics of diffusion annealed and age hardened Al7075–steel powder reinforced metal matrix …
	Materials Research Express, 2018

[277]	INVESTIGATION AND TRIBOLOGICAL CHARACTERIZATION OF HYBRID NANO MMC
	International Journal of Scientific Research and Innovations, 2018

[278]	Mechanical and Wear Behavior of Aluminium-Zircon Sand-Flyash Metal Matrix Composite
	IOP Conference Series: Materials Science and Engineering, 2018

[279]	Dry condition machining performance of T6 treated aluminium matrix composites
	Materials Today: Proceedings, 2018

[280]	The influence of Cu doped on structure and mechanical properties of aluminium material
	The 3rd Annual Applied Science and Engineering Conference (AASEC 2018), 2018

[281]	To compare the output characteristics in electric discharge machining using new and re-used tool on Aluminium silicon Carbide MMC.
	International Journal of Management, Technology And Engineering, 2018

[282]	Investigation on properties of SiC reinforced Zn-Mg-Cu based Al metal matrix composites-a case study
	Materials Today: Proceedings, 2018

[283]	Sİ3N4 TAKVİYESİYLE ATIK ALÜMİNYUMDAN ÜRETİLMİŞ KOMPOZİTLERİN ÖZELLİKLERİNİN İNCELENMESİ
	Technological Applied Sciences, 2018

[284]	THE EFFECT OF ROLLING CYCLES AND SETTING DIRECTION OF THE REINFORCEMENT ON ALUMINUM BASED COMPOSITE BY REPETITIVE PRESS ROLL …
	2018

[285]	Simulation of mushy state solidification in stir casting
	World Journal of Engineering, 2018

[286]	Investigation on mechanical behavior and material characteristics of various weight composition of SiCp reinforced aluminium metal matrix composite
	IOP Conference Series: Materials Science and Engineering, 2018

[287]	Fabrication of LM 25/WC functionally graded composite for automotive applications and investigation of its mechanical and wear properties
	Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2018

[288]	A REVIEW ON FABRICATION, MECHANICAL CHARACTERIZATION OF ALUMINIUM METAL MATRIX COMPOSITES
	"JOURNAL OF ADVANCEMENT IN ENGINEERING AND TECHNOLOGY", 2018

[289]	Analysis of SiC grain size variation and NaCl concentration on the corrosion susceptibility of AA1070 aluminium matrix composites
	Cogent Engineering, 2018

[290]	Preparation and characterization of aluminium-silica metal matrix composite
	AIP Conference Proceedings, 2018

[291]	Parametric study of the dry sliding wear behaviour of AA6082-T6/SiC and AA6082-T6/B4C composites using RSM
	Journal of Mechanical Science and Technology, 2018

[292]	Synthesis of Al LM25/TiC Composite Using Squeeze Casting Method and Investigation of its Mechanical and Adhesive Wear properties
	Materials Today: Proceedings, 2018

[293]	Characterization and experimental analysis of boron carbide and rice husk ash reinforced AA7075 aluminium alloy hybrid composite
	Journal of Alloys and Compounds, 2018

[294]	TRIBOLOGICAL CHARACTERIZATION OF MICROWAVE PROCESSED AL-SIC METAL MATRIX COMPOSITES
	INTERNATIONAL JOURNAL OF RESEARCH INAERONAUTICAL AND MECHANICAL ENGINEERING, 2018

[295]	Preparation and characterization of ternary alloy (Al-20Cu-10Mg) reinforced aluminium composite
	Materials Today: Proceedings, 2018

[296]	Dry sliding wear characterization of red mud reinforced aluminium composite
	Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2018

[297]	Effect of SiC Reinforcement on Microstructure and Mechanical Properties of Aluminum Metal Matrix Composite
	IOP Conference Series: Materials Science and Engineering, 2018

[298]	Development of Al-SiC MMC by bottom pouring stir casting and parametric analysis on EDM
	International Research Journal of Engineering and Technology, 2018

[299]	Experimental Characterization of Aluminum-Based Hybrid Composites Obtained Through Powder Metallurgy
	IOP Conference Series: Materials Science and Engineering, 2018

[300]	Development and Mechanical Properties of SiC Reinforced Aluminium Metal Matrix Composites
	2018

[301]	Characterization of the developed aluminium matrix composites-an experimental analysis
	Materials Today: Proceedings, 2018

[302]	Effect of Nano-Ceria on Physiognomies of Aluminum-5% Zinc Sacrificial Anode
	2018

[303]	Influence Of Mechanical &Tribological BehaviourOf Al 2024 MMC Fabricated By Stir Casting Technique-A Review
	Materials Today: Proceedings, 2018

[304]	EFFECT OF DATE SEED PARTICULATES ON MECHANICAL PROPERTIES OF ALUMINIUM ALLOY
	Acta Technica Corvininesis - Bulletin of Engineering, 2018

[305]	An Investigation on the Mechanical Properties of Nano-Al2O3 and TiC Reinforced Aluminum Matrix Hybrid Composites
	Journal of Advanced Microscopy Research, 2018

[306]	Corrosion Behavior of Cenosphere Reinforced Al7075 Metal Matrix Composite—An Experimental Approach
	2018

[307]	Aluminum Metal Matrix Composites with SiC, Al2O3 and Graphene–Review
	2018

[308]	An Experimental and Modeling Study of Synthesis, Consolidation and Aging Behavior of AA2014 Composite Reinforced by TiB2 via Powder Metallurgy Method
	Transactions of the Indian Institute of Metals, 2018

[309]	Technology Drivers: Engine for Growth: Proceedings of the 6th Nirma University International Conference on Engineering (NUiCONE 2017), November 23-25, 2017 …
	Technology Drivers: Engine for Growth, 2018

[310]	Tensile behavior of aluminum alloy (AA7050) metal matrix composite reinforced with graphene fabricated by stir and squeeze cast processes
	Science and Technology of Materials, 2018

[311]	Mechanical and tribological behaviour of tungsten carbide reinforced aluminum LM4 matrix composites
	Particulate Science And Technology, 2018

[312]	Study of silicon carbide-reinforced aluminum matrix composite brake rotor for motorcycle application
	The International Journal of Advanced Manufacturing Technology, 2018

[313]	Surface Micro patterning of Aluminium Reinforced Composite for Aerospace Applications through High Energy Pulse Laser Peening
	Materials Today: Proceedings, 2018

[314]	Corrosion and Wear Studies On LM6 Grade Aluminum-Cenosphere Composite–An Experimental Approach
	Materials Today: Proceedings, 2018

[315]	Mechanical Characterization of Aluminium Hybrid Metal Matrix Composite
	2018

[316]	Influence of Edge Condition of Cutting Tool on Cutting Force and Surface Roughness While Machining Aluminum-Fly Ash Composites
	Materials Today: Proceedings, 2018

[317]	Influence Of Percent Filler On Tensile Strength, Impact Strength And Wear Properties Of The Al7075-Cenosphere Composite
	Materials Today: Proceedings, 2018

[318]	Studies on Mechanical Behaviour of Aluminium-Silicon Carbide-Copper Metal Matrix Composite
	The 2nd International Conference on Mechanical, Aeronautical and Automotive Engineering (ICMAA 2018), 2018

[319]	Characteristic behaviour of aluminium metal matrix composites: A review
	Materials Today: Proceedings, 2018

[320]	Microstructures and hardness of A356-SiC composites produced by the mechanical stir casting
	Materials Today: Proceedings, 2018

[321]	Synthesize and characterization of ceria based nano-composite materials for low temperature solid oxide fuel cell
	International Journal of Hydrogen Energy, 2018

[322]	Fabrication and Characterization of Aluminium Boron Nitride Composite for Fins
	Materials Today: Proceedings, 2018

[323]	Fabrication of Al/SiC Metal Matrix Composite by Stir Casting and Machinability Study by Micro-Drilling
	2018

[324]	Multi-Response Optimization of Al2024/red mud MMC using Hybrid Taguchi-GRA-Entropy Optimization Technique
	Materials Today: Proceedings, 2018

[325]	Fabrication & Mechanical Testing of AA6082/Si3N4 Composites
	2018

[326]	Wear study of Al-SiC metal matrix composites processed through microwave energy
	AIP Conference Proceedings, 2018

[327]	Characterization of AA6082/Si3N4 Composites
	1st International Conference on New Frontiers in Engineering, Science & Technology, 2018

[328]	The effect of laser engraving on L-shaped Carbon Fiber Reinforced Polymer (CFRP) components during the curing process
	2018

[329]	Investigation of Mechanical Properties for Al-Sic-TiB2 Metal Matrix Composite
	2018

[330]	Prospects of effective use and production of particle-reinforced metal matrix composite alloys
	2018

[331]	Effect of Nano BN Addition on the Properties of an Aluminum Metal Matrix Composite
	2018

[332]	Characterization behaviour of aluminium matrix hybrid composite-A Review
	2018

[333]	Development of Al–SiC MMC by bottom pouring stir casting and parametric analysis on EDM
	2018

[334]	Graphical Representations of Experimental and ANN Predicted Data for Mechanical and Electrical Properties of AlSiC Composite Prepared by Stir Casting Method …
	2018

[335]	Experimental Investigation of Processes and Properties of Aluminium Matrix Composites
	2018

[336]	INVESTIGATION OF MECHANICAL PROPERTIES FOR Al-SiC-TiB2 METAL MATRIX COMPOSITE.
	2018

[337]	Development of Hybrid Aluminium Alloy Composite
	2018

[338]	Effect of nano ceria on physiognomies of aluminum-5% zinc sacrificial anode
	2018

[339]	Technology Drivers: Engine for Growth: Proceedings of the 6th Nirma University International Conference on Engineering (NUICONE 2017), November 23-25 …
	2018

[340]	THE EFFECT OF SILICON CARBIDE (SiC) ON PHYSICAL AND MECHANICAL PROPERTIES OF RECYCLED ALUMINIUM CHIP AA6061
	2018

[341]	Encyclopedia of Aluminum and Its Alloys, Two-Volume Set (Print)
	2018

[342]	Doctor of Philosophy In Mechanical Engineering
	2018

[343]	Aluminum Metal Matrix Composites with SiC, Al2O3 and Graphene – Review
	Archives of foundry …, 2018

[344]	High temperature mechanical characteristics of friction stir processed light alloys
	2018

[345]	Mechanical deformation behavior of aged Al-Cu alloys and innovative Al-Cu metal matrix composite fabricated using stir-casting technique
	2018

[346]	Fabrication and experimental analysis of aluminium composites and optimization of process parameters
	2017

[347]	A review on the mechanical properties of aluminum based metal matrix composites (MMCs
	International Journal. Engg. Sci. Invention, 2017

[348]	Hardness and Wear analysis of Micro/nano sized sic reinforced aluMiniuM coMposites
	I J A M R, 2017

[349]	The Effect of ECAP on the Al6061 Matrix and Al-SiCp at Elevated Temperature
	2017

[350]	SiCp/Al 复合材料表面电镀 Ni-P 合金的工艺研究
	2017

[351]	Study of Mechanical and Corrosive Behaviour of Metal Alloy Composites-Ingrained with Micro and Hybrid Reinforcement
	4th International Conference on Multidisciplinary Research & Practice, 2017

[352]	Vibrational Analysis of Aluminium Graphite Metal Matrix Composite
	International Journal of Engineering Research & Technology, 2017

[353]	ELECTRICAL DISCHARGE MACHINING: STATE OF THE ART AND FUTURE PROSPECTS
	International Journal of Latest Trends in Engineering and Technology, 2017

[354]	APPLICATIONS AND MODELLING CHALLENGES OF METAL MATRIX COMPOSITES
	2017

[355]	Effects of Precipitation Hardening on Mechanical Properties of Multistage Stirred Cast AA6063 Composites
	2017

[356]	Assessment of the density and mechanical properties of particulate periwinkle shell-aluminium 6063 metal matrix composite (PPS-ALMMC) produced by two …
	2017

[357]	Influence of Nano TiO2 Particles on the Properties and Behaviour of A356 Aluminium Metal Matrix Composites
	2017

[358]	Fabrication and wear characterization of silicon carbide and copper reinforced aluminium matrix composite
	Materials Discovery, 2017

[359]	Investigation on Mechanical Properties and Analysis of Dry Sliding Wear Behavior of Al LM13/AlN Metal Matrix Composite Based on Taguchi's Technique
	Journal of Tribology, 2017

[360]	Metal Matrix Composites Processed through Powder Metallurgy Route
	2017

[361]	Influence of Nanoreinforced Particles (Al2O3) on Fatigue Life and Strength of Aluminium Based Metal Matrix Composite
	Al-Khwarizmi Engineering Journal, 2017

[362]	A Review on the Mechanical Properties of Aluminum Based Metal Matrix Composites (MMCs)
	2017

[363]	Aluminium Based Metal Matrix Composites: A Review of Reinforcement; Mechanical, Wear Properties
	2017

[364]	Surface Micro Patterning of Aluminium Reinforced Composite through Laser Peening
	International Journal of Manufacturing, Materials, and Mechanical Engineering (IJMMME), 2017

[365]	Synthesis and Mechanical Characterization of Aluminium Based MMC With SIC as Reinforcement
	2017

[366]	Manufacturing of AA2124 aluminum alloy metal matrix composites reinforced by silicon carbide processed by powder metallurgy techniques of high energy ball milling and hot extrusion
	Materials Science Forum, 2017

[367]	Optimization of gas protected stir casting process using GRA and TOPSIS
	2017

[368]	Evaluation of Mechanical Properties of Al6063 Alloy MMC Reinforced with SiC and Coconut Shell Ash
	2017

[369]	ВОЗДЕЙСТВИЕ СИНТЕЗИРУЕМОЙ НАНОКОМПОЗИЦИИ SiC-Al2O3 НА СТРУКТУРООБРАЗОВАНИЕ И ТРИБОТЕХНИЧЕСКИЕ СВОЙСТВА КОМПОЗИТА НА …
	2017

[370]	Effect of B4C/Fly Ash Addition on Wear and Mechanical Properties of Al-Cu-Mg Alloy
	Engineering and Technology Journal, 2017

[371]	Eco-friendly benzimidazolium based ionic liquid as a corrosion inhibitor for aluminum alloy composite in acidic media
	Journal of Molecular Liquids, 2017

[372]	ASSESSMENT OF THE DENSITY AND MECHANICAL PROPERTIES OF PARTICULATE PERIWINKLE SHELL-ALUMINIUM 6063 METAL MATRIX COMPOSITE (PPS-ALMMC) PRODUCED BY TWO-STEP CASTING
	Acta Technica Corvininesis-Bulletin of Engineering, 2017

[373]	Microstructural Investigation of Aluminium-Silicon Carbide Particulate Metal Matrix Composite Fabricated by Stir Casting
	International Journal for Innovative Research in Science & Technology, 2017

[374]	Effect of hybrid reinforcement of SiC and Al2O3 in Nylon-6 matrix on mechanical properties of feed stock filament for FDM
	IETE Journal of Education, 2017

[375]	Microstructures and characteristics of solid state recycling aluminium chips AA6061/Al-SiC composites fabricated by cold compaction method
	AIP Conference Proceedings, 2017

[376]	Microstructure and properties of sintered metal matrix composites reinforced with sic particles Mikrostruktura i właściwości spiekanych kompozytów o osnowie …
	2017

[377]	Assessment of some mechanical properties and microstructure of particulate periwinkle shell-aluminium 6063 metal matrix composite (PPS-ALMMC) produced by two …
	Nigerian Journal of Technology, 2017

[378]	Development of Bamboo Stem Ash-Al-Hybrid Reinforced with SiC Produced by Spin Casting Technique
	American Journal of Engineering Research, 2017

[379]	Multiobjective optimization of in situ process parameters in preparation of Al-4.5% Cu–TiC MMC using a grey relation based teaching–learning-based optimization algorithm
	Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2017

[380]	Study of mechanical and tribological behaviour of Al/SiC/ZrO2 hybrid composites fabricated through powder metallurgy technique
	Materials Research Express, 2017

[381]	Studies on Non-traditional Machining of Metal Matrix Composites
	Materials Today: Proceedings, 2017

[382]	Corrosion Behavior of Recycling Al-Alloy Based Metal Matrix Composites Reinforced by Nano particles
	Kurdistan Journal of Applied Research, 2017

[383]	Analysis the Surface Roughness in Drilling of Aluminium Composites
	International Journal of Engineering Technology, Management and Applied Sciences, 2017

[384]	Properties of an Al/(Al2O3+ TiB2+ ZrB2) hybrid composite manufactured by powder metallurgy and hot pressing
	Journal of Applied Mechanics and Technical Physics, 2017

[385]	Characterization of mechanical properties and three‐body abrasive wear of functionally graded aluminum LM25/titanium carbide metal matrix composite …
	Materialwissenschaft und Werkstofftechnik, 2017

[386]	Fabrication and Testing of Aluminium 6061 Alloy & Silicon Carbide Metal Matrix Composites
	2017

[387]	A SIGNIFICANT REASSESS ON PERFORMANCE AND MACHINING OF METAL MATRIX COMPOSITES
	2017

[388]	Development and Analysis of Aluminium Based Alloy A356 Reinforced with Aluminium Nitride and Magnesium by Stir Casting Technique
	2017

[389]	GRA and ANN Integrated Approach for Photochemical Machining of Al/SiC Composite
	Materials Today: Proceedings, 2017

[390]	UJI PERFORMASI DISC BRAKE SEPEDA MOTOR MATERIAL KOMPOSIT MATRIKS ALUMINIUM BERPENGUAT PARTIKEL KERAMIK
	2017

[391]	Свойства гибридного композита Al/(Al2O3+TiB2+ZrB2), изготовленного с использованием методов порошковой металлургии и горячего прессования
	2017

[392]	Atık Alüminyumdan Elde Edilen Matrise Grafen Takviyesiyle Üretilen Kompozitlerin Özelliklerinin İncelenmesi
	B?LD?R? ?ZETLER? K?TABI, 2017

[393]	Investigation of properties of composites produced by reinforcement graphene matrix obtained from waste aluminium
	2017

[394]	Multi-objective Optimization of Mechanical Properties of Aluminium 7075-Based Hybrid Metal Matrix Composite Using Genetic Algorithm
	Advances in 3D Printing & Additive Manufacturing Technologies, 2017

[395]	Production and mechanical properties of nano SiC particle reinforced Ti–6Al–4V matrix composite
	Transactions of Nonferrous Metals Society of China, 2017

[396]	Characterization of mechanical and tribological behaviour of aluminiumsilicon carbide-titanium dioxide hybrid metal matrix composites (MMC)
	… Conference on Current …, 2017

[397]	Effects of reinforcement materials and matrix particle sizes on mechanical properties and wear of recycled aluminum chips
	2017

[398]	Evaluation of Mechanical Properties of Aluminium Alloy T6-6061 (Reinforced with ZRO2) Subjected to Forging
	Manufacturing Technology Today, 2017

[399]	The effects of quenching and aging on the mechanical and physical properties of recycled aa6061 aluminum chips
	2017

[400]	Свойства гибридного композита , изготовленного с использованием методов порошковой металлургии и горячего прессования
	Прикладная механика и …, 2017

[401]	Influence of Processing on Microstructure and Properties of Al-Al2O3 Nanocomposites
	2016

[402]	Electrical Discharge Machining (EDM): Casting Process Parameters
	Encyclopedia of Plasma Technology-Two Volume …, 2016

[403]	Aluminum Based Metal Matrix Composites: A Review Influence of Reinforced Particles; Techniques; Factors Affecting the Composite
	2016

[404]	Fabrication of Al–SiC–B 4 C metal matrix composite by powder metallurgy technique and evaluating mechanical properties
	Perspectives in Science, 2016

[405]	Effect of Sintering Temperature on the Properties of Aluminium-Aluminium Oxide Composite Materials
	2016

[406]	A Review on Properties of Aluminium Based Metal Matrix Composites via Stir Casting
	International Journal of Scientific & Engineering Research, 2016

[407]	EVALUATION OF FATIGUE AND CORROSION TEST OF Al LM13 REINFORCED WITH HEMATITE
	International Journal of Research in Engineering and Technology , 2016

[408]	Prediction of Mechanical Properties and Modeling on Sliding Wear Behaviour of LM25/TiC Composite Using Response Surface Methodology
	Cogent Mathematics, 2016

[409]	Study of Physical, Mechanical and Machinability Properties of Aluminium Metal Matrix Composite Reinforced with Coconut Shell Ash particulates
	2016

[410]	Effect of silicon carbide addition on the corrosion behavior of powder metallurgy Cu 30Zn brass in a 3.5 wt% NaCl solution
	Journal of Alloys and Compounds, 2016

[411]	STRUCTURAL ANALYSIS OF COMPOSITE MATERIAL HELICAL GEAR UNDER DIFFERENT LOADING CONDITION
	INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY, 2016

[412]	STRUCTURAL AND MODEL ANALYSIS OF A COMPOSITE MATERIAL DIFFERENTIAL GEARBOX ASSEMBLY
	INTERNATIONAL JOURNA L OF ENGINEERING SCI ENCES & RESEARCH TECHNOLOGY, 2016

[413]	Abrasive Wear Behaviour of Monolithic Alloy, Homogeneous and Functionally Graded Aluminium (LM25/AlN and LM25/SiO2) Composites
	Journal of Biomaterials Science Polymer Edition, 2016

[414]	Microstructure and Mechanical Behaviour of AA6082-T6/SiC/B4C Based Aluminium Hybrid Composites
	Drying Technology, 2016

[415]	COMPARATIVE STUDY ON INDIVIDUAL AND COMBINED EFFECTS OF ZIRCONIUM DIOXIDE AND GRAPHITE REINFORCEMENTS ON MECHANICAL PROPERTIES OF AL 6061 COMPOSITES
	International Journal of Research in Engineering and Technology, 2016

[416]	Wear Behaviour of Al-6061 alloy with different mesh size and reinforcement of SiC Metal Matrix Composite
	International Journal of Recent Advances in Engineering & Technology, 2016

[417]	Influence of single and dual particle reinforcements on the corrosion behavior of aluminum alloy based composites
	2016

[418]	Dry sliding wear behaviour of AA6082-T6/SiC/B4C hybrid metal matrix composites using response surface methodology
	2016

[419]	Analysis of Stir Cast Aluminium Silicon Carbide Metal Matrix Composite: A Comprehensive Review
	Procedia Technology, 2016

[420]	DEVELOPMENT OF HYBRID COMPOSITE FOR AUTOMOBILE: A PROPOSED TECHNOLOGY
	International Journal For Technological Research In Engineering , 2016

[421]	Effect of Heat Treatment on the Wear Behaviour of Functionally Graded LM13/B 4 C Composite.
	Tribology in Industry, 2016

[422]	The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting
	2016

[423]	Parameters optimization, microstructure and microhardness of silicon carbide laser deposited on titanium alloy
	2016

[424]	Effect of Reinforcements in the enhancement of Mechanical Properties: An Experimental Study
	IOSR Journal of Mechanical and Civil Engineering, 2016

[425]	THE DEVELOPMENT AND CHARACTERIZATION OF GLASS FIBER-SILICA SAND NANOPARTICLES REINFORCED HYBRID COMPOSITES
	2016

[426]	SiCp/2024Al 复合材料与 SiC 陶瓷的软钎焊
	焊接, 2016

[427]	Hybrid materials of aluminium
	Materials Today: Proceedings, 2016

[428]	Mechanical Properties of Metal Al/SiC and AlCu/SiC Metal Matrix Composites (MMCs)
	2016

[429]	Experimental investigation of Mg/SiC composite fabrication via friction stir processing
	The International Journal of Advanced Manufacturing Technology, 2016

[430]	Wear performance of garnet aluminium composites at high contact pressure
	AIP Conference Proceedings, 2016

[431]	Development and Characterization of Aluminium LM6 based Matrix using 2% Sic & 2% Al2O3
	2016

[432]	Aluminum Silicon Carbide Particulate Metal Matrix Composite Development Via Stir Casting Processing
	Silicon, 2016

[433]	Characteristic Study and Enhancement of Mechanical Properties of Al2024 Gray Cast Iron Powder Reinforced MMC by Heat Treatment
	2016

[434]	MECHANICAL AND TRIBOLOGICAL PROPERTIES OF FLY ASH REINFORCED ALUMINIUM 6061 COMPOSITE-A REVIEW
	International Journal of Current Trends in Engineering & Research, 2016

[435]	SOME ASPECTS CONCERNING A NEW POSSIBILITY OF Al-SiCP COMPOSITE PRODUCTION
	U.P.B. Sci. Bull., 2016

[436]	RECENT DEVELOPMENTS IN THE FABRICATION OF METAL MATRIX COMPOSITES BY STIR CASTING ROUTE–A REVIEW
	2016

[437]	Machining Studies on Hybrid AMCs used for Automotive Applications
	2016

[438]	Modification of microstructure and superficial properties of A356 and A356/10% SiCp by Selective Laser Surface Melting (SLSM)
	Surface and Coatings Technology, 2016

[439]	Wear Rate Investigation of Aluminium Based Silicon Carbide Metal Matrix Composite Embedded with Copper
	International Journal for Innovative Research in Science & Technology, 2016

[440]	Compared production behavior of borax and unborax premixed SiC reinforcement Al7Si-Mg-TiB alloys composites with semi-solid stir casting method
	AIP Conference Proceedings, 2016

[441]	INVESTIGATION ON MECHANICAL PROPERTIES OF AL 7075-AL2O3 METAL MATRIX COMPOSITE
	International Journal of Mechanical Engineering and Technology, 2016

[442]	Latest Research Development in Aluminum Matrix with Particulate Reinforcement Composites–A Review
	2016

[443]	Comparison of the mechanical and wear behaviour of aluminium alloy with homogeneous and functionally graded silicon nitride composites
	Science and Engineering of Composite Materials, 2016

[444]	Mechanical properties of Aluminum-Copper (p) composite metallic materials
	Journal of Applied Research and Technology, 2016

[445]	Role of SiC ceramic particles on the physical and mechanical properties of Al–4% Cu metal matrix composite fabricated via mechanical alloying
	Journal of Composite Materials, 2016

[446]	Modeling and Analysis on the Influence of Reinforcement Particle Size During EDM of Aluminum (Al/3.25 Cu/8.5 Si)/Fly Ash Composites
	Journal of Advanced Manufacturing Systems, 2016

[447]	Experimental investigations of Al-TiO2-Gr hybrid composites fabricated by stir casting
	2016

[448]	Manufacturing and Characterization of AA1100 Aluminum Alloy Metal Matrix Composites Reinforced by Silicon Carbide and Alumina Processed by Powder Metallurgy
	Materials Science Forum, 2016

[449]	Some Investigations on Effect of Cooling Rate on Al2O3 Reinforced Al-MMC Prepared by Vacuum Moulding
	Journal of The Institution of Engineers (India): Series C, 2016

[450]	Parametric Optimization of Wear Behavior of Friction Stir Welded Dissimilar Joints Aluminum Alloys (AA6061–AA6082)
	IJSART, 2016

[451]	Recent developments in the fabrication of metal matrix composites by stir casting route. A Review
	2016

[452]	Investigation of the Effect of Solution Hardening on Mechanical Properties of Al 7075–SiC Metal Matrix Composite
	2016

[453]	Mechanical Characterization of stir cast Al 356-Fly ash Composite
	SKN International Journal of Scientific and Multidisciplinary Engineering Research, 2016

[454]	Experimental Evaluation of Pouring Speed Effects on Mechanical and Machining Properties of Al6061-Cu-Sicp Metal Matrix Composites
	2016

[455]	Analysis of Enhanced Mechanical Properties of Al-MMCs Reinforced with SiC by using Stir Casting Method
	International Journal of Technical Research (IJTR), 2016

[456]	ผล ของ อนุภาค ซิลิคอน คา ร์ ไบ ด์ ต่อ โครงสร้าง จุลภาค และ สมบัติ ทาง กล ใน วัสดุ ผสม อะลูมิเนียม A356 (Effects of SiCp Additions on Microstructure and …
	RMUTI JOURNAL Science …, 2016

[457]	Evolution of fatigue and corrosion test of Al LM13 reinforced with hematite
	Int JR Eng Technol, 2016

[458]	Hybrid Aluminium Metal Matrix Composites and Reinforcement Materials: A Review
	… Journal of Innovative …, 2016

[459]	Effect of heat treatment on the wear behaviour of functionally graded LM13/B4C composite
	Tribology in Industry, 2016

[460]	Encyclopedia of Plasma Technology-Two Volume Set
	2016

[461]	Softening resistance, dimensional stability and corrosion behaviour of alumina and rice husk ash reinforced aluminium matrix composites subjected to thermal …
	Tribology in Industry, 2015

[462]	Microstructural Analysis, Micro Hardness and Compressive Behaviour of Dual Reinforced Particles ADC-12 Alloy Composite
	Int. J. Eng. Technol …, 2015

[463]	Effect of heat treatment variables on the abrasive wear behaviour of Al-6061 Alloy and Al 6061-SiCP composites using Taguchi Technique
	2015

[464]	Mechanical and Tribological Behaviour of Friction-Stir-Processed Al 6061 Aluminium Sheet Metal Reinforced with Hybrid Surface Nanocomposite.
	2015

[465]	Study on mechanical properties of Al 7075 based metal matrix composites
	2015

[466]	Primjena Al kompozita za jarbole
	2015

[467]	Characterisation of Aluminum-Silicon Carbide Composite using Stir Casting Technique
	2015

[468]	Dry sliding wear behaviour of aluminium Al–Si12Cu/TiB 2 metal matrix composite using response surface methodology
	2015

[469]	Mechanical properties of Aluminium–Graphite particulate composites
	2015

[470]	Experimental investigation and mechanical behavior of a 356.1 aluminium alloy matrix composite reinforced with silicon carbide
	2015

[471]	Mechanical Properties of Cast Aluminum Matrix Composites Reinforced with SiC and Al2O3 Particles
	2015

[472]	Morphological Study of Coated Silicon Carbide Particle with Multi Wall Carbon Nano Tubes
	Applied Mechanics and Materials, 2015

[473]	Development And Wear Analysis Of Flyash/Graphite Filled Copper Alloy Composite For Bearing Application...
	2015

[474]	Comparison of microstructure and wear resistance of A356–SiCp composites processed via compocasting and vibrating cooling slope
	Transactions of Nonferrous Metals Society of China, 2015

[475]	Development of Aluminium MMC with Hybrid Reinforcement-A Review
	Materials Science Forum, 2015

[476]	6061 铝合金/岩粉复合材料的干滑动磨损行为
	中国有色金属学报: 英文版, 2015

[477]	Analysis on Mechanical Behaviour of AA 1050/SiC and AA 1050/Al2O3 Composites
	2015

[478]	Analysis of Mechanical Properties and Morphological Study of Coated Ceramics Using Multiwall Carbon Nanotubes with Aluminium Alloy
	Applied Mechanics and Materials, 2015

[479]	Influence of the Grit size of Silicon Carbide Particles on the Mechanical and Electrical Properties of Stir Casting Aluminum Matrix Composite Material
	Silicon, 2015

[480]	FABRICATION AND COMPARATIVE STUDY OF Zn-Ni METAL MATRIX COMPOSITE
	International Journal of Science, Technology & Management , 2015

[481]	Experimental Evaluation in the Properties of Various Tin Bronzes
	International Journal of Latest Technology in Engineering, Management & Applied Science, 2015

[482]	Design for a sustainability of a commercial product: a case study of a dynamic loudspeaker
	2015

[483]	STUDY ON THE EFFECTS OF SiC PARTICLES ON TENSILE PROPERTIES FOR Al/SiC COMPOSITES
	International Journal of Science, Technology & Management, 2015

[484]	Design and Fabrication of a Stir Casting Furnace Set-Up
	Int. Journal of Engineering Research and Applications, 2015

[485]	Mechanical Properties of Cast Aluminium Matrix Composites Reinfroced with SiC and Al2O3 Particles
	2015

[486]	Effects of Silicon Carbide (SIC) Nano Particulates Addition on Mechanical Properties of Aa2618 Alloy
	2015

[487]	MICROSTRUCTURAL ANALYSIS, MICROHARDNESS AND COMPRESSIVE BEHAVIOUR OF DUAL REINFORCED PARTICLES ADC-12 ALLOY COMPOSITE
	2015

[488]	Tribological behavior of AL-lm25 and SiC
	micron, 2015

[489]	Aluminium matrix hybrid composites: a review of reinforcement philosophies; mechanical, corrosion and tribological characteristics
	Journal of Materials Research and Technology, 2015

[490]	EXPERIMENTAL INVESTIGATION AND MECHANICAL BEHAVIOR OF A356. 1 ALUMINIUM ALLOY MATRIX COMPOSITE REINFORCED WITH SILICON CARBIDE
	International Research Journal of Engineering and Technology, 2015

[491]	Dry Sliding Wear Behaviour of Aluminium Al–Si12Cu/TiB2 Metal Matrix Composite Using Response Surface Methodology
	Tribology Letters, 2015

[492]	Development of AL SIC MMC and Parametric Analysis on EDM
	2015

[493]	Microstructural Finite Element Modeling and Simulation on Al–MgO Composites
	International Journal of Computational Methods, 2015

[494]	Effect of Magnesium Addition on Fracture Toughness in Aluminium Silicon Carbide Metal Matrix Composite Composite
	International Journal of Research in Engineering & Advanced Technology, 2015

[495]	Effect of Heat Treatment Variables on the Abrasive Wear Behaviour of Al-6061 Alloy and Al 6061-SiC P Composites Using Taguchi Technique
	American Journal of Materials Science, 2015

[496]	MMHCs in Light-Weight Car Design
	Conference: International conference on Emerging & Futuristic trends in engineering & Technology, 2015

[497]	Multi Response Optimization of Tungsten Inert Gas (TIG) Welding of Al6063/15% Sicp Metal Matrix Composites
	Journal of Applied Mechanical Engineering, 2015

[498]	Development and characterization of Al-Cu-Mg alloy/TiC metal matrix composites
	Industrial Science Journal, 2015

[499]	Identification of Optimum Composition and Mechanical Properties of Al-Ni Metal Matrix Composite
	Journal of Minerals and Materials Characterization and Engineering, 2015

[500]	Thermo-Mechanical and Fracture Characterization of Uncoated, Single and Multilayer (SiN/CrN) Coating on Granite Powder Filled Metal Alloy Composites
	Silicon, 2015

[501]	Softening Resistance, Dimensional Stability and Corrosion Behaviour of Alumina and Rice Husk Ash Reinforced Aluminium Matrix Composites Subjected to Thermal Cycling.
	Tribology in Industry, 2015

[502]	Investigations of Al–SiC AMC prepared by vacuum moulding assisted stir casting
	Journal of Manufacturing Processes, 2015

[503]	Review of experimental fracture toughness (KIC) of aluminium alloy and aluminium MMCs
	International Journal of Fracture and Damage Mechanics, 2015

[504]	ANALISA KETANGGUHAN KOMPOSIT ALUMINIUM BERPENGUAT SERBUK SiC
	Jurnal Simetris, 2015

[505]	MECHANICAL PROPERTIES OF Al-Si COMPOSITE MATERIALS OBTAINED BY STIR CASTING
	ACTA TECHNICA NAPOCENSIS-Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, 2015

[506]	Recent development and challenges in processing of ceramics reinforced Al matrix composite through stir casting process: A Review
	International Journal of Engineering and Applied Sciences, 2015

[507]	Wettability of Silicon Carbide Particles by the Aluminium Melts in Producing Al-SiC Composites
	Advanced Materials Research, 2015

[508]	Effect of Environmental Conditions for New Hybrid Aluminium Metal Matrix Composites Wear
	2015

[509]	复合铸造与振动斜板冷却铸造 SiC_p 增强 A356 复合材料显微组织与耐磨性的比较
	中国有色金属学报: 英文版, 2015

[510]	CFD Simulation of Centrifugal Casting of Al-SiC FGM for the Application of Brake Rotor Disc
	2015

[511]	Mechanical Properties of Al-Si-SiCp Composites
	International Journal of Scientific & Engineering Research, 2015

[512]	Roughness Analysis of the Holes Drilled on Al/Sic Metal Matrix Composites using Atomic Force Microscope.
	Applied Mechanics & Materials, 2015

[513]	Effect on mechanical properties of aluminium alloy composites on adding ash as reinforcement material
	Journal of Metals, Materials and Minerals, 2015

[514]	STUDIES ON MECHANICAL PROPERTIES AND TRIBOLOGICAL BEHAVIOUR OF LM25/SiC/Al2O3 COMPOSITES
	Journal of Engineering Science and Technology, 2015

[515]	Dry sliding wear characterization of Al 6061/rock dust composite
	Transactions of Nonferrous Metals Society of China, 2015

[516]	Mechanical and Tribological Behaviour of Friction-Stir-Processed Al 6061 Aluminium Sheet Metal Reinforced with {{\ rm Al} _ {2}{\ rm O} _ {3}/0.5\,{\ rm Gr}} Hybrid Surface Nanocomposite
	Arabian Journal for Science and Engineering, 2015

[517]	Microstructure and Properties of Spark Plasma Sintered Aluminum Containing 1 wt.% SiC Nanoparticles
	Metals, 2015

[518]	Fracture toughness evaluation technique for metal matrix composites using ball indentation method
	International Journal of Computer Aided Engineering and Technology, 2015

[519]	ADHESIVE WEAR BEHAVIOUR OF ALUMINIUM HYBRID METAL MATRIX COMPOSITES USING GENETIC ALGORITHM
	Journal of Engineering Science and Technology, 2015

[520]	Investigation of Vibration properties of Aluminium, Silicon carbide, Mica a Hybrid Metal Matrix Composite
	2015

[521]	Development and Analysis of Aluminium Hybrid Metal Matrix Composites
	Int. J. Adv. Eng, 2015

[522]	Microstructure and Tribological Properties of Aluminum Matrix Composite
	Key Engineering Materials, 2015

[523]	Investigation of Wear Loss in Aluminium Silicon Carbide Mica Hybrid Metal Matrix Composite
	2015

[524]	Effect of Machining Parameters on the Surface Roughness while Turning Particulate Composites
	Procedia Engineering, 2014

[525]	Aluminium alloy-rice husk ash composites production and analysis
	Leonardo Electronic Journal of Practices and Technologies, 2014

[526]	EFFECT OF SILICON CARBIDE PERCENTAGE ON FRACTURE TOUGHNESS OF ALUMINIUM SILIOCN CARBIDE METAL MATRIX COMPOSITES
	2014

[527]	Fabrication and heat treatment of ceramic-reinforced aluminium matrix composites-a review
	International Journal of Mechanical and Materials Engineering, 2014

[528]	Study of the Effect of Varying Pouring Rate on Mechanical Properties of Al-Cu and SiCp Reinforced Metal Matrix Composites (MMC)
	Journal of Energy Technologies and Policy, 2014

[529]	Mechanical and Machining Properties Analysis of Al6061-Cu-Reinforced SiC P Metal Matrix Composite
	Journal of Minerals and Materials Characterization and Engineering, 2014

[530]	Microstructural analysis and tribological behavior of aluminum alloy reinforced with hybrid alumina/nanographite particles
	Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2014

[531]	Studies on mechanical and tribological behaviour of particulate Aluminium metal matrix composites
	NULL 2014

[532]	Synthesis of Al-Sic Composite Prepared By Mechanical Alloying
	C Singh, J Singh - iosrjournals.org, 2014

[533]	FABRICATION AND CHARACTERISATION OF Al-BASED HYBRID COMPOSITE REINFORCED WITH SiC, Al2O3 AND C PARTICLES BY SQUEEZE CASTING
	G Singh, CS Kalra - confabjournals.com, 2014

[534]	FABRICATION AND MECHANICAL PROPERTIES OF STIR CAST Al-Si12Cu/B4C COMPOSITES
	T Raviteja, N Radhika, R Raghu - ijret.org, 2014

[535]	A Fatigue Model for Discontinuous Particulate-Reinforced Aluminum Alloy Composite: Influence of Microstructure
	Journal of materials engineering and performance, 2014

[536]	Mechanical Behavior of Aluminum (AlSi10Mg)-RHA Composite
	International Journal of Engineering and Technology, 2014

[537]	Wear Characterization of Aluminium/Sic/Al2O3 Hybrid Metal Matrix Composite Using Taguchi Technique
	International Journal of Innovative Research and Development, 2014

[538]	Development of Aluminium based Titanium Carbide Particulate Metal Matrix Composite
	NULL 2014

[539]	Influence of fly ash particles on tensile and impact behaviour of aluminium (Al/3Cu/8.5 Si) metal matrix composites
	Science and Engineering of Composite Materials, 2014

[540]	PROCESSING AND CHARACTERIZATION OF SiCp REINFORCED ZINC-ALUMINUM METAL MATRIX COMPOSITES AS BEARING MATERIALS
	M Khan Hasib Kaisar, N Haque, KM Shorowordi - buet.ac.bd, 2014

[541]	Machining Behavior of Al6061-Fly Ash Composites
	Procedia Materials Science, 2014

[542]	Tribological and mechanical behavior of particulate aluminum matrix composites
	Journal of Reinforced Plastics and Composites, 2014

[543]	Study of Mechanical Properties & Residual Stresses on Post Wear Samples of A356-SiC Metal Matrix Composites
	Procedia Materials Science, 2014

[544]	SOME THEORETICAL AND PRACTICAL ASPECTS IN PRODUCING CAST ALUMINIUM-SILICON CARBIDE PARTICLES COMPOSITES
	IJ ODAGIU, F ?TEF?NESCU, G NEAGU - scientificbulletin.upb.ro, 2014

[545]	A Comparative Study on the Properties of Al-7% Si-Rice Husk Ash and Al-7% Si-Bagasse Ash Composites Produced by Stir Casting
	AM Usman, A Raji, MA Hassan, NH Waziri - theijes.com, 2014

[546]	In-situ synthesis of SiC particles by the structural evolution of TiC x in Al–Si melt
	Journal of Alloys and Compounds, 2014

[547]	Microstructural Studies of Aluminium 7075-Silicon Carbide-Alumina Metal Matrix Composite
	Advanced Materials Research, 2014

[548]	A Comparative Analysis of Transimpedance Amplifier in Giga-bit Optical Communication
	Research Journal of Engineering Sciences, 2014

[549]	Mechanical and Microstructure Characterization of A356 (Al/SiC) MMC
	Advanced Materials Research, 2014

[550]	A Study on Mechanical Properties of Silicon Carbide, E-Glass and Red Mud Reinforced Aluminium (LM25) Composite.
	NULL 2014

[551]	Mechanical properties of Magnesium Inoculated 6063 Aluminium Alloy
	MA Bodude, EF Ochulor, WA Ayoola, SO Adeosun - 2013, 2014

[552]	A STUDY ON MECHANICAL PROPERTIES OF REINFORCED AL6061 USING REINFORCING MATERIALS OF Al2O3 AND SiC COMPOSITE
	Journal of Advanced Manufacturing Technology (JAMT), 2014

[553]	Evaluation of mechanical characteristics for Aluminum-copper Metal matrix composite
	2014

[554]	Microstructural analysis, micro hardness and tensile strength of silicon carbide and zirconium silicate dual reinforced particle ADC-12 alloy composite
	International Journal of Applied Science and Engineering Research, 2014

[555]	Microstructural and Medium Silica Quartz Slurry Erosion Wear Behavior of Silicon Carbide and Zircon Sand Dual Reinforced Particle (DRP) LM-13 Alloy Composites
	International Journal of Engineering Innovations and Research, 2014

[556]	Study on the Effect of the Roof Opening on the Temperature Underneath
	International Journal of Applied Engineering Research, 2014

[557]	Study of Machinability Characteristics on E-Glass Fiber and Silicon Carbide Reinforced Aluminum 2618 Hybrid Composite
	Journal of Basic and Applied Engineering Research, 2014

[558]	Microstructure and erosion wear of LM-13 alloy composites with dual reinforcement by silicon carbide and zircon sand in fine silica quartz slurry
	Usak University Journal of Material Sciences, 2014

[559]	EFFECT OF POURING TEMPERATURE AND STIRRING SPEED ON MECHANICAL, MICROSTRUCTURE AND MACHINING PROPERTIES OF AL6061-CU REINFORCED SiC_P METAL MATRIX COMPOSITES
	International Journal of Research in Engineering and Technology , 2014

[560]	MICROSTRUCTURAL ANALYSIS, MICRO HARDNESS AND TENSILE STRENGTH OF SILICON CARBIDE AND ZIRCONIUM SILICATE DUAL REINFORCED PARTICLE LM- 13 ALLOY COMPOSITE
	JOURNAL OF INTERNATIONAL ACADEMIC RESEARCH FOR MULTIDISCIPLINARY, 2014

[561]	FARKLI MATRİS KOMPOZİSYONLARI VE TAKVİYE ORANLARI İÇİN ALÜMİNYUM ESASLI KOMPOZİTLERİN TOZ METALURJİSİ YÖNTEMİYLE ÜRETİMİ VE KARAKTERİZASYONU
	Celal Bayar University Journal of Science, 2014

[562]	中间层对高体积分数 SiC_p/Al 复合材料真空钎焊的影响
	焊接学报, 2014

[563]	Physical, mechanical, and tribological attributes of stir-cast AZ91/SiCp composite
	Acta Metallurgica Sinica (English Letters), 2014

[564]	Effect of silicon carbide percentage on fracture toughness of aluminum silicon carbide metal matrix composites
	2014

[565]	Production and characterization of aluminum based composites by powder metallurgy method for different matrix composition and amounth of the reinforcement
	Celal Bayar Üniversitesi Fen Bilimleri Dergisi, 2014

[566]	Statistical Modeling and Analysing of Wear Behaviour of LM25 Al/B4C/Gr Hybrid Composites
	2014

[567]	Study of Hardness of Al-SiC Composites Using Powder Metallurgy
	2014

[568]	Mechanical and machining properties analysis of Al6061-Cu-reinforced SiCP metal matrix composite
	2014

[569]	Investigation of Tool Wear during Friction Stir Welding of Metal Matrix Composites
	2014

[570]	EXPERIMENTAL ANALYSIS OF THERMOPHYSICAL AND MECHANICAL CHARACTERISTICS OF AlSiCp METAL MATRIX COMPOSITE
	2014

[571]	A Novel Composite with Nacreous Designed to Resist Wear and Corrosion
	2014

[572]	Study on mechanical properties and wear behavior of LM6 aluminum/nano Al2O3 composites
	Applied Mechanics and Materials, 2014

[573]	EFFECT OF POURING TEMPERATURE AND STIRRING SPEED ON MECHANICAL, MICROSTRUCTURE AND MACHINING PROPERTIES OF AL6061-CU …
	2014

[574]	The Effect of Milling Time on Aluminium Silicon Carbide Composite
	2014

[575]	Physical, Mechanical, and Tribological Attributes of Stir-Cast AZ91/SiC p Composite
	2014

[576]	Microstructural and medium silica quartz slurry erosion wear behavior of silicon carbide and zircon sand dual reinforced particle (DRP) LM-13 alloy …
	2014

[577]	Production and characterization of aluminum based composites by powder metallurgy method for different matrix composition and amounth of the …
	2014

[578]	Development of Al-Sic MMC and Experimental investigation by Electro discharge machining-A Review
	International Journal for Scientific Research & Development, 2014

[579]	A Study on Mechanical Properties of Silicon Carbide, E-Glass and Red Mud Reinforced Aluminium (LM25) Composite
	IOSR-Journal of …, 2014

[580]	FARKLI MATRİS KOMPOZİSYONLARI VE TAKVİYE ORANLARI İÇİN ALÜMİNYUM ESASLI KOMPOZİTLERİN TOZ METALURJİSİ YÖNTEMİYLE ÜRETİMİ VE …
	Celal Bayar University Journal of Science, 2014

[581]	Effect of filler metal on vacuum brazing of high volume fraction SiCp/Al composites
	Transactions of The …, 2014

[582]	The effect of TiC additive on microstructure and final properties of microwave and conventional sintered Al-SiC composite
	rad, K Asadian… - Journal of Advanced …, 2013

[583]	Investigation of Dry Sliding Wear Behaviour of Particulate Reinforced Mg Matrix Composites
	… Physica Polonica A, 2013

[584]	Development of Al/SiC 5%, Al/SiC 10%, Al/SiC 15%, metal matrix composite and its comparision with aluminium alloy–LM25 on tribological parameters
	Int. J. Emerging Technol …, 2013

[585]	e-Governance in India
	2013

[586]	Frictional and wear characteristics of stir-cast hybrid composite aluminium Al6061reinforced with SiC particulates
	2013

[587]	Effect of process parameters on microstructure and properties of spark plasma sintered Al-SiC nanocomposites
	ProQuest Dissertations Publishing, 2013

[588]	بررسی تاثیر کاربید تیتانیوم بر‌ریز‌ساختار و خواص نهایی کامپوزیت‌های آلومینیوم-کاربید سیلیسیم تهیه شده به روش‌های حرارت‌دهی معمولی و مایکروویو‎
	NULL 2013

[589]	The effect of sintering temperature on mechanical properties of Al/SiC composites
	2013

[590]	Mechanical behaviour of alumina reinforced AA 6063 metal matrix composites developed by two step-stir casting process
	Acta Technica Corviniensis-bulletin of engineering, 2013

[591]	Effect of process parameters on corrosion rate of friction stir welded aluminium SiC–Gr hybrid composites
	Corrosion Engineering, Science and Technology, 2013

[592]	Microstructure Analysis of Aluminium metal matrix alloy with Silicon Carbide
	2013

[593]	Development of Al/Sic5%, Al/Sic10%, Al/Sic15%, Metal Matrix Composite And Its Comparision With Alumi-nium Alloy – LM25 On Tribological Parameters
	International Journal of Emerging Technology and Advanced Engineering, 2013

[594]	Process Capability Analysis of MMC Prepared by Combining FDM, Vacuum Moulding and Stir Casting
	Asian Journal of Engineering and Applied Technology, 2013

[595]	Investigation of Dry Sliding Wear Behaviour of B4C Particulate Reinforced Mg Matrix Composites
	Acta Physica Polonica A, 2013

[596]	Enhancing the Properties of Al–WC Nanocomposites Using Liquid Metallurgy
	Experimental Techniques, 2013

[597]	Investigation of the effect of aging variables on the impact behaviour of Al 6061 alloy and its composites
	Research & Technology in the Coming Decades (CRT 2013), National Conference on Challenges in, 2013

[598]	Experimental and finite element analysis of mechanical and fracture behavior of SiC particulate filled A356 alloy composites: Part I
	Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications, 2013

[599]	Experimental Investigation of Effect of Gear Milling Parameters of Al-B4C Composite Gears on Surface Roughness
	Advanced Materials Research, 2013

[600]	Mechanical Behaviour of Cold Deformed and Solution Heat-treated Alumina Reinforced AA 6063 Metal Matrix Composites
	KK Alaneme - criticalthinking.uwi.tt, 2013

[601]	Production of Aluminium AC8H/Al2O3p Coated Metal Matrix Composites by Stir Casting Route
	KMUTNB: International Journal of Applied Science and Technology, 2013

[602]	Research Review On Corrosion Behaviour Of Metal Matrix Composites
	NULL 2013

[603]	Study of Dry Sliding Wear Behavior of Aluminium/SiC/Al2O3/Graphite Hybrid Metal Matrix Composite Using Taguchi Technique
	International Journal of Scientific and Research Publications, 2013

[604]	Machinability of aluminum metal matrix composite reinforced with in-situ ceramic composite developed from mines waste colliery shale
	Materials and Manufacturing Processes, 2013

[605]	Sliding wear of LM25 aluminium alloy with 7.5% SiC+ 2.5% TiO2 and 2.5% SiC+ 7.5% TiO2 hybrid composites
	Journal of Composite Materials, 2013

[606]	Tribological Behavior of Novel Hybrid Composite Materials Using Taguchi Technique
	Journal of Tribology, 2013

[607]	The key attributes of synthesizing ceramic particulate reinforced al-based matrix composites through stir casting process: a review
	Materials and Manufacturing Processes, 2013

[608]	Preparation of Aluminum Metal Matrix Composite with Novel In situ Ceramic Composite Particulates, Developed from Waste Colliery Shale Material
	Metallurgical and Materials Transactions B, 2013

[609]	IN SITU SEM MICROBENDING TESTS OF ALUMINIUM ALLOYS AND ALUMINIUM MATRIX COMPOSITES
	LM Laorden, P Rodrigo, B Torres, J Rams, 2013

[610]	Nonlinear elastic properties of Al-alloy/Nanodiamond composite
	Proceedings of Meetings on Acoustics. Acoustical Society of America, 2013

[611]	Study of Particle Distribution in Al-SiC Particulate Composite by Random Motion of Mould
	Key Engineering Materials, 2013

[612]	Fractographic aspects of al-alloy-sicp metal matrix composite subjected to static, dynamic and cyclic mechanical loading
	ECF19, 2013

[613]	OPTIMIZATION OF PROCESS PARAMETER FOR STIR CASTED ALUMINIUM METAL MATRIX COMPOSITE USING TAGUCHI METHOD
	L Singh, B Ram, A Singh - ijret.org, 2013

[614]	SiCAl 电子封装材料制备工艺研究进展
	兵器材料科学与工程, 2013

[615]	The Effect of Sintering Duration on Mechanical Properties of Al/SiC Composites
	International Review of Mechanical Engineering (IREME), 2013

[616]	Caracterização fratográfica de compósito de matriz metálica submetido a ensaios de impacto, flexão e fadiga
	Thesis, 2013

[617]	Parametric Optimization of Wear Test on Al/SiC–Metal Matrix Composite Using Taguchi Method
	2013

[618]	Influence of Reinforcement Type on Microstructure, Hardness, and Tensile Properties of an Aluminum Alloy Metal Matrix Composite
	Journal of Minerals and Materials Characterization and Engineering, 2013

[619]	Thermal, Hardness and Microstructural Characterization of Al-Si-SiCp Composites
	Journal of Minerals and Materials Characterization and Engineering, 2012

[620]	Dry Sliding Wear Behaviour of Aluminium/Be3Al2 (SiO3) 6 Composite Using Taguchi Method
	Journal of Minerals and Materials Characterization and Engineering, 2012

[621]	Fabrication and Characterizations of Mechanical Properties of Al-4.5% Cu/10TiC Composite by In-Situ Method
	Journal of Minerals and Materials Characterization and Engineering, 2012

[622]	Fabrication of A356 composite reinforced with micro and nano Al₂O₃ particles by a developed compocasting method and study of its properties
	Journal of Alloys and Compounds, 2012

[623]	The Optimization of Sliding Wear Behaviour of Aluminium/Be3Al2 (SiO3) 6 Composite using Taguchi Approach
	Optimization, 2012

[624]	Experimental Analysis in Machining Aluminium Matrix Composites
	NULL 2012

[625]	An Experimental investigation of Mechanical behavior of Aluminum by adding SiC and Alumina
	International Journal on Emerging Technologies, 2012

[626]	Corrosion behaviour of Al (6063) alloy (as-cast and age hardened) in H2SO4 solution
	Journal of Materials Science Research, 2012

[627]	Hot rolling behaviour of stir-cast Al 6061 and Al 6082 alloys–SiC fine particulates reinforced composites
	Journal of Materials Processing Technology, 2012

[628]	Fracture toughness (K1C) and tensile properties of as-cast and age-hardened aluminium (6063)–silicon carbide particulate composites
	Scientia Iranica, 2012

[629]	Microstructural and wear behavior of dual reinforced particle (DRP) aluminum alloy composite
	Journal of Materials Science, 2012

[630]	Thermo-mechanical and crack position on stress intensity factor in particle-reinforced Zinc–aluminium alloy composites
	Computational Materials Science, 2012

[631]	Effect of particle size on mechanical properties and tribological behaviour of aluminium/fly ash composites
	Science and Engineering of Composite Materials, 2012

[632]	Aluminum-Silicon Carbide Composites for Enhanced Physio-Mechanical Properties
	Advanced Materials Research, 2012

[633]	Evaluation of Mechanical Properties of Aluminum Alloy 6061-Glass Particulates reinforced Metal Matrix Composites
	MK Yc, U Shankar - academia.edu, 2012

[634]	Dry sliding wear behaviour of aluminium/alumina/graphite hybrid metal matrix composites
	Industrial Lubrication and Tribology, 2012

[635]	Observations on the Electrical Properties of Al-Sic Composite
	NULL 2012

[636]	Fabrication and Characterization of Aluminium Matrix Composites by High Velocity Oxy-Fuel Thermal Spraying
	Advanced Materials Research, 2012

[637]	Mechanical Behavior of A356/Albite Composite Material
	2012

[638]	Entangled dilaton dyons
	2012

[639]	Production and age-hardening behavior of borax premixed SiC reinforced Al-Mg-Si alloy composites developed by double stir-casting technique
	2012

[640]	DEVELOPMENT OF ELECTROMAGNETIC STIR CASTING PROCESS FOR METAL MATRIX COMPOSITE (MMC)
	2012

[641]	Analisa Pengaruh Komperesibilitas Metalurgi Serbuk Terhadap Karakteristik Fisik Pada Komposit Matriks Logam Alumunium Berpenguat Alumina
	2012

[642]	CHALLENGES OF NANOMATERIALS AND NANOTECHNOLOGIES IN JOINT EDUCATION AND RESEARCH PROJECT
	ICERI2011 …, 2011

[643]	Измерение упругих модулей дисперсно-наполненных композиционных материалов лазерным оптико-акустическим методом
	2011

[644]	An Investigation on the Influence of SiC Volume Percent and Heat-treatment on the Corrosion Behaviour of Al-6063/SiCp Composites in HCL - H2SO4 Environment
	NSE Technical Transactions, 2011

[645]	Partikül takviyeli alüminyum matrisli kompozit malzemelerin difüzyonla birleştirilmesi
	2011

[646]	CORROSION BEHAVIOUR OF ALUMINIUM BASED METAL MATRIX COMPOSITES REINFORCED WITH SiC AND ZIRCON SAND
	2011

[647]	Corrosion behaviour of heat-treated Al-6063/SiCp composites immersed in 5 wt% NaCl solution
	Leonardo Journal of Sciences, 2011

[648]	Influence of size of SiC particles on selected properties of aluminium-based composites obtained by extrusion of P/M compats
	Kompozyty, 2011

[649]	Mechanical behaviour of aluminium based metal matrix composites reinforced with SIC and Alumina
	NULL 2011

[650]	Tribological behaviour of Aluminium/Alumina/Graphite hybrid metal matrix composite using taguchi's techniques
	Journal of Minerals and Materials Characterization and Engineering, 2011

[651]	Microstructure and mechanical properties of Al/Al2O3 micro and nano nanocomposites fabricated by a novel stirr casting
	Journal of Mathematics, 2011

[652]	Karakterisasi Blok Rem Kereta Api Berbahan Al-Sic Berdasarkan Komposisi Material
	Majalah Ilmiah Gema Maritim, 2011

[653]	Developing Regression Model to Predict the Tensile Strength, Bending Load and Micro Hardness and to Optimize the wt% of Sic in Al-Sic Composite
	2006

[654]	Optimization of Machining Parameter Using Electric Discharge Machining on Fabricated Aluminium-Based Metal Matrix Composite


[655]	CYCLIC GAN AS TOOL FOR GENERATING SYNTHETIC MICROSTRUCTURAL DATA OF AL-SiC METAL MATRIX COMPOSITE


[656]	YÜKSEK LİSANS TEZİ
	AAKGVE SİLİSYUM

[657]	Effect of Silica on Sliding Wear Behavior of Silica reinforced Aluminium Alloy based Composites


[658]	Fabrication and Analysis of Mechanical Properties of Aluminium-Magnesium Composite


[659]	JOURNAL OF MECHANICAL ENGINEERING EDUCATION


[660]	Mechanical Behaviour of Mg/SiC Composite Processed by Friction Stir Processing


[661]	Optimization using Taguchi Method to Investigate the Effects of Process Parameters on the Hardness of Developed Aluminium Roofing Sheets


[662]	Sliding Wear of Cryogenic Treated Al6061Aluminium Hybrid Metal Matrix Composite


[663]	A STUDY ON FABRICATION TECHNIQUES OF ALUMINUM BASED COMPONENTS

[1]	Innovations in Electronic Materials: Advancing Technology for a Sustainable Future Advances in Science, Technology & Innovation, 2025 DOI:10.1007/978-3-031-73816-6_45

[2]	A study on the effects of hybrid (SIC- PSSA) nano sized reinforcement on mechanical and tribological behaviour of Al alloy-based metal matrix composite produced by ultrasonic assisted stir casting Materials Research Express, 2024 DOI:10.1088/2053-1591/ad62bb

[3]	Investigation of the Microstructure and Mechanical Properties of an Al/SiC/ZrO2 Hybrid Composite by Spark Plasma Sintering Technique Gazi University Journal of Science, 2024 DOI:10.35378/gujs.1348461

[4]	Advancements in Materials Processing Technology, Volume 2 Springer Proceedings in Materials, 2024 DOI:10.1007/978-981-97-6875-2_21

[5]	Tribological, Compressibility and Micro Hardness Behaviour of Al7075/SiC Composites Journal of Physics: Conference Series, 2024 DOI:10.1088/1742-6596/2925/1/012021

[6]	Experimental Investigation of Al-6061 Metal Matrix Composite Reinforced with Selenium MATEC Web of Conferences, 2024 DOI:10.1051/matecconf/202439301002

[7]	Effect of Mg percentage and weight fraction of yttrium oxide on the tensile strength of aluminum matrix composite (Al-6061 /Y2O3) ELECTROMECHANICAL ENGINEERING AND ITS APPLICATIONS, 2024 DOI:10.1063/5.0205902

[8]	Characterization and Mechanical Testing of Hybrid Metal Composites of Aluminium Alloy (A356/LM25) Reinforced by Micro-Sized Ceramic Particles Journal of The Institution of Engineers (India): Series C, 2024 DOI:10.1007/s40032-024-01064-w

[9]	Review On Development, Nanoparticle Reinforcement and Sustainable Materials For Enhancement Of Mechanical Properties In Aluminium Hybrid Metal Matrix Composites E3S Web of Conferences, 2024 DOI:10.1051/e3sconf/202455201068

[10]	Al2014–Alumina Aerospace Composites: Particle Size Impacts on Microstructure, Mechanical, Fractography, and Wear Characteristics ACS Omega, 2023 DOI:10.1021/acsomega.3c01163

[11]	Periodic advancement of aluminium metal matrix composites: tribo-mechanical performance, corrosion properties, challenges and future Advances in Materials and Processing Technologies, 2023 DOI:10.1080/2374068X.2023.2216397

[12]	Using electrochemical testing and modeling to assess the efficiency of a water-soluble inhibitor on the corrosion of 6061Al-15 % (v) SiC (p) composite Corrosion Reviews, 2023 DOI:10.1515/corrrev-2022-0078

[13]	Influence of sawdust ash on the microstructural and physicomechanical properties of stir-cast Al6063/SDA matrix composite The International Journal of Advanced Manufacturing Technology, 2023 DOI:10.1007/s00170-023-11700-x

[14]	Surrogate analytical models of damage localization in metal matrix composites Journal of Composite Materials, 2023 DOI:10.1177/00219983231176793

[15]	Modeling, Characterization, and Processing of Smart Materials Advances in Chemical and Materials Engineering, 2023 DOI:10.4018/978-1-6684-9224-6.ch009

[16]	Fabrication, Mechanical Characterization, and Ranking of Shell Ash Reinforced Al-7075-Based Hybrid Composites Journal of Engineering Sciences, 2023 DOI:10.21272/jes.2023.10(2).c5

[17]	Using electrochemical testing and modeling to assess the efficiency of a water-soluble inhibitor on the corrosion of 6061Al-15 % (v) SiC (p) composite Corrosion Reviews, 2023 DOI:10.1515/corrrev-2022-0078

[18]	Optimization using Taguchi Method to Investigate the Effects of Process Parameters on the Hardness of Developed Aluminium Roofing Sheets Black Sea Journal of Engineering and Science, 2023 DOI:10.34248/bsengineering.1273509

[19]	Evaluation of machining behaviours in aluminium metal matrix composite reinforced with polypropylene and silicon carbide INTERNATIONAL CONFERENCE ON SCIENCE, ENGINEERING, AND TECHNOLOGY 2022: Conference Proceedings, 2023 DOI:10.1063/5.0173284

[20]	Microstructural characterization and properties of aluminium 7075/Mo prepared by microwave sintering for high-strength application Advances in Materials and Processing Technologies, 2023 DOI:10.1080/2374068X.2022.2130894

[21]	Development of aluminum composite reinforced with selected agricultural residues Discover Materials, 2023 DOI:10.1007/s43939-023-00069-z

[22]	Characterization of mechanical properties and machineability parameters of aluminium alloy (Al7075) reinforced with silicon carbide (SiC) and tungsten carbide (WC) a hybrid metal matrix composite fabricated via centrifugal casting—a review 2ND INTERNATIONAL CONFERENCE & EXPOSITION ON MECHANICAL, MATERIAL, AND MANUFACTURING TECHNOLOGY (ICE3MT 2022), 2023 DOI:10.1063/5.0186918

[23]	Study the effect of silica particles on mechanical characteristics of aluminium matrix composite prepared by stir casting process 4TH INTERNATIONAL SCIENTIFIC CONFERENCE OF ALKAFEEL UNIVERSITY (ISCKU 2022), 2023 DOI:10.1063/5.0183554

[24]	Effect of Heat Treatment on the Hardness and Electrical Connectivity of an Aluminum Composite Reinforced with Al2O3 Nanoparticles Metal Science and Heat Treatment, 2023 DOI:10.1007/s11041-023-00953-8

[25]	Surrogate analytical models of damage localization in metal matrix composites Journal of Composite Materials, 2023 DOI:10.1177/00219983231176793

[26]	Recent Trends in Product Design and Intelligent Manufacturing Systems Lecture Notes in Mechanical Engineering, 2023 DOI:10.1007/978-981-19-4606-6_41

[27]	Recent Trends in Product Design and Intelligent Manufacturing Systems Lecture Notes in Mechanical Engineering, 2023 DOI:10.1007/978-981-19-4606-6_73

[28]	Microstructural characterization and properties of aluminium 7075/Mo prepared by microwave sintering for high-strength application Advances in Materials and Processing Technologies, 2022 DOI:10.1080/2374068X.2022.2130894

[29]	Simulation Based Optimization of Geometrical Factors and Process Parameters for a Continuous Caster to Fabricate Aluminum Based MMC International Journal of Metalcasting, 2022 DOI:10.1007/s40962-021-00705-5

[30]	The influence of imperfect interfaces on the measurable effective properties of ceramic composites Composite Interfaces, 2022 DOI:10.1080/09276440.2021.1942716

[31]	Influence of Nano-sized Al2O3 Reinforcements on the Mechanical Behavior of the Al7075 Composites Micro and Nanosystems, 2022 DOI:10.2174/1876402913666210315160435

[32]	Morphological and mechanical characterization of the Al-4032/granite powder composites Journal of Composite Materials, 2022 DOI:10.1177/00219983221092837

[33]	Fabrication and Characterization of Aluminum (Al-6061) Matrix Composite Reinforced with Waste Glass for Engineering Applications Journal of Nanomaterials, 2022 DOI:10.1155/2022/8409750

[34]	Effect of different reinforcements on aluminium composite properties – a review Materials Today: Proceedings, 2022 DOI:10.1016/j.matpr.2022.04.572

[35]	Wear and Friction Behavior of Gr/Sn Solid Lubricated Dual Reinforced AMCs Silicon, 2022 DOI:10.1007/s12633-021-01343-6

[36]	Effect of reinforcement on microstructure and mechanical properties of aluminium hybrid composites Materials Today: Proceedings, 2022 DOI:10.1016/j.matpr.2022.04.986

[37]	Mechanical behaviour of stir cast aluminum matrix composites reinforced with silicon carbide and palm kernel shell ash Manufacturing Review, 2022 DOI:10.1051/mfreview/2022011

[38]	Effect of dual reinforced ceramic particles on elevated temperature tribological properties of hybrid aluminium matrix composites Advances in Materials and Processing Technologies, 2022 DOI:10.1080/2374068X.2020.1853495

[39]	Experimental investigation of Al7075 reinforced with WC and SiC metal matrix composites Materials Today: Proceedings, 2022 DOI:10.1016/j.matpr.2021.10.239

[40]	Optimization of wear behaviour of Al7075/SiC/Al2O3 MMCs Using statistical method Advances in Materials and Processing Technologies, 2022 DOI:10.1080/2374068X.2022.2036583

[41]	Tensile hardness and wear properties of iron oxide (Fe3O4) reinforced aluminium 7075 metal matrix composites Advances in Materials and Processing Technologies, 2022 DOI:10.1080/2374068X.2022.2079227

[42]	Optimization of wear behaviour of Al7075/SiC/Al2O3 MMCs Using statistical method Advances in Materials and Processing Technologies, 2022 DOI:10.1080/2374068X.2022.2036583

[43]	Tensile hardness and wear properties of iron oxide (Fe3O4) reinforced aluminium 7075 metal matrix composites Advances in Materials and Processing Technologies, 2022 DOI:10.1080/2374068X.2022.2079227

[44]	Effect of reinforcement on microstructure and mechanical properties of aluminium hybrid composites Materials Today: Proceedings, 2022 DOI:10.1016/j.matpr.2022.04.986

[45]	Effect of dual reinforced ceramic particles on elevated temperature tribological properties of hybrid aluminium matrix composites Advances in Materials and Processing Technologies, 2022 DOI:10.1080/2374068X.2020.1853495

[46]	A Novel Investigation on Tensile Strength, Compressive strength, Hardness and Corrosion resistance of A16061 Composite with Weight Fractions of 5%, 10% and 15% SiC and Comparing the Outputs with as-cast A16061 2022 14th International Conference on Mathematics, Actuarial Science, Computer Science and Statistics (MACS), 2022 DOI:10.1109/MACS56771.2022.10023027

[47]	Development of Al-SiC composite material from rice husk and its parametric assessment Materials Research Express, 2022 DOI:10.1088/2053-1591/ac4a2e

[48]	Tribological behaviour of LM25 hybrid metal matrix composites by using Taguchi’s techniques Materials Today: Proceedings, 2022 DOI:10.1016/j.matpr.2021.09.221

[49]	Innovations in Mechanical Engineering Lecture Notes in Mechanical Engineering, 2022 DOI:10.1007/978-981-16-7282-8_38

[50]	A literature survey on effect of various types of reinforcement particles on the mechanical and tribological properties of aluminium alloy matrix hybrid nano composite Materials Today: Proceedings, 2022 DOI:10.1016/j.matpr.2022.01.068

[51]	Biowaste Management: Banana Fiber Utilization for Product Development Journal of Natural Fibers, 2022 DOI:10.1080/15440478.2020.1776665

[52]	Evaluation of mechanical and dry sliding wear behaviour of Al 2214 aluminium alloy – graphite metal matrix composites Journal of Mines, Metals and Fuels, 2022 DOI:10.18311/jmmf/2021/30087

[53]	Morphological and mechanical characterization of the Al-4032/granite powder composites Journal of Composite Materials, 2022 DOI:10.1177/00219983221092837

[54]	A Novel Investigation on Tensile Strength, Compressive strength, Hardness and Corrosion resistance of A16061 Composite with Weight Fractions of 5%, 10% and 15% SiC and Comparing the Outputs with as-cast A16061 2022 14th International Conference on Mathematics, Actuarial Science, Computer Science and Statistics (MACS), 2022 DOI:10.1109/MACS56771.2022.10023027

[55]	Experimental Investigation and Optimization of Material Removal Rate and Tool Wear in the Machining of Aluminum-Boron Carbide (Al-B4C) Nanocomposite Using EDM Process Advances in Materials Science and Engineering, 2022 DOI:10.1155/2022/4254024

[56]	The Role of Tetra Hybrid Reinforcements on the Behavior of Aluminum Metal Matrix Composites Journal of Nanomaterials, 2022 DOI:10.1155/2022/1988293

[57]	Trends in Aluminium Matrix Composite Development Crystals, 2022 DOI:10.3390/cryst12101357

[58]	Effect of different reinforcements on aluminium composite properties – a review Materials Today: Proceedings, 2022 DOI:10.1016/j.matpr.2022.04.572

[59]	Fabrication and Characterization of Aluminum (Al‐6061) Matrix Composite Reinforced with Waste Glass for Engineering Applications Journal of Nanomaterials, 2022 DOI:10.1155/2022/8409750

[60]	The Role of Tetra Hybrid Reinforcements on the Behavior of Aluminum Metal Matrix Composites Journal of Nanomaterials, 2022 DOI:10.1155/2022/1988293

[61]	A comprehension review of dry sliding wear on aluminum matrix composites Materials Today: Proceedings, 2022 DOI:10.1016/j.matpr.2021.11.312

[62]	Study on Mechanical Properties of AA6061/SiC/B₄C Hybrid Nano Metal Matrix Composites Materials Science Forum, 2021 DOI:10.4028/www.scientific.net/MSF.1034.35

[63]	Handbook of Nanomaterials and Nanocomposites for Energy and Environmental Applications 2021 DOI:10.1007/978-3-030-36268-3_182

[64]	[Retracted] Optimization on Operation Parameters in Reinforced Metal Matrix of AA6066 Composite with HSS and Cu Advances in Materials Science and Engineering, 2021 DOI:10.1155/2021/1609769

[65]	Experimental analysis and characterization of Mechanical, Physical properties of Aluminium (Al6061) Metal Matrix composite reinforced with SiC and Al2O3 using Stir casting IOP Conference Series: Materials Science and Engineering, 2021 DOI:10.1088/1757-899X/1145/1/012109

[66]	Evaluation of mechanical performance on a developed AA 6061matrix-Mg/0.9-Si/0.68 reinforced with B4C based composites Functional Composites and Structures, 2021 DOI:10.1088/2631-6331/abdb99

[67]	Effect of the Parametric Processes in Stir-Casting Technique for Aluminium Based Composite Development: A review IOP Conference Series: Materials Science and Engineering, 2021 DOI:10.1088/1757-899X/1107/1/012070

[68]	Recent Advances in Mechanical Engineering Lecture Notes in Mechanical Engineering, 2021 DOI:10.1007/978-981-15-8704-7_44

[69]	Multi-objective optimization of process parameters in dry sliding wear characteristics of Al/sic composites using Taguchi grey relation analysis Materials Today: Proceedings, 2021 DOI:10.1016/j.matpr.2020.09.133

[70]	Advances in Industrial Automation and Smart Manufacturing Lecture Notes in Mechanical Engineering, 2021 DOI:10.1007/978-981-15-4739-3_59

[71]	Influence of the Fly Ash Material Inoculants on the Tensile and Impact Characteristics of the Aluminum AA 5083/7.5SiC Composites Materials, 2021 DOI:10.3390/ma14092452

[72]	Study on Mechanical Properties of AA6061/SiC/B₄C Hybrid Nano Metal Matrix Composites Materials Science Forum, 2021 DOI:10.4028/www.scientific.net/MSF.1034.35

[73]	Handbook of Nanomaterials and Nanocomposites for Energy and Environmental Applications 2021 DOI:10.1007/978-3-030-36268-3_182

[74]	Optimization on Operation Parameters in Reinforced Metal Matrix of AA6066 Composite with HSS and Cu Advances in Materials Science and Engineering, 2021 DOI:10.1155/2021/1609769

[75]	A review on metal matrix composite for automobile applications Materials Today: Proceedings, 2021 DOI:10.1016/j.matpr.2020.11.670

[76]	Eggshell and rice husk ash utilization as reinforcement in development of composite material: A review Materials Today: Proceedings, 2021 DOI:10.1016/j.matpr.2020.11.717

[77]	The key attributes of processing parameters on semi-solid metal casting: An Overview E3S Web of Conferences, 2021 DOI:10.1051/e3sconf/202130901089

[78]	Study of stirrer speed and preheat temperature on stir cast aluminium matrix composite materials – A review Materials Today: Proceedings, 2021 DOI:10.1016/j.matpr.2021.06.442

[79]	Dry Sliding Wear Study of Solid Lubricants and Sillimanite-Reinforced Aluminum Alloy Composites Journal of Materials Engineering and Performance, 2021 DOI:10.1007/s11665-021-05975-y

[80]	Micro-structural and mechanical characterization of AA2014/TiB2/Al2O3 hybrid composites RECENT TRENDS IN MANUFACTURING TECHNOLOGIES, MATERIALS PROCESSING, AND TESTING, 2021 DOI:10.1063/5.0068176

[81]	Investigation of Mechanical Properties of Si3N4 Reinforced Composites Produced from Aluminum Waste European Journal of Science and Technology, 2021 DOI:10.31590/ejosat.1010738

[82]	Studies on Wear Behaviour of Coated RHA-TIO2-LM24 Aluminium Alloy Composite International Journal of Scientific Research in Science and Technology, 2021 DOI:10.32628/IJSRST218540

[83]	A comprehension review of dry sliding wear on aluminum matrix composites Materials Today: Proceedings, 2021 DOI:10.1016/j.matpr.2021.11.312

[84]	Study of age hardening process on Al/SiC/Al2O3 hybrid composite IOP Conference Series: Materials Science and Engineering, 2020 DOI:10.1088/1757-899X/912/5/052025

[85]	Cutting temperature prediction model and parametric optimization in turning aluminium matrix composite PROCEEDINGS OF ADVANCED MATERIAL, ENGINEERING & TECHNOLOGY, 2020 DOI:10.1063/5.0024242

[86]	The comparative study of conventional and ultra-high frequency induction sintering behavior of pure aluminum International Advanced Researches and Engineering Journal, 2020 DOI:10.35860/iarej.729395

[87]	Emerging Trends in Mechanical Engineering Lecture Notes in Mechanical Engineering, 2020 DOI:10.1007/978-981-32-9931-3_29

[88]	Effects of Stirring Duration and Casting Temperature in Ultrasonic Assisted Stir Casting of Al A356 Matrix Composites Journal of Polytechnic, 2020 DOI:10.2339/politeknik.629473

[89]	Structure Property Correlation of In Situ Reinforced Al–based Metal Matrix Composite via Stir Casting Materials Performance and Characterization, 2020 DOI:10.1520/MPC20190038

[90]	Enhancement of toughness of SiC through compositing SiC–Al interpenetrating phase composites Nanotechnology, 2020 DOI:10.1088/1361-6528/ab6468

[91]	An investigation on the impact of SiC/B4C on the mechanical properties of Al-6.6Si-0.4Mg alloy Materials Today: Proceedings, 2020 DOI:10.1016/j.matpr.2019.12.359

[92]	Manufacturing techniques for metal matrix composites (MMC): an overview Advances in Materials and Processing Technologies, 2020 DOI:10.1080/2374068X.2020.1729603

[93]	Thixoforming and Rheo-Die-Casting of A356/SiC Composite Metals, 2020 DOI:10.3390/met10020251

[94]	MICROSTRUCTURAL ANALYSIS, MICROHARDNESS AND COMPRESSIVE BEHAVIOUR OF DUAL REINFORCED PARTICLES ADC-12 ALLOY COMPOSITE International Journal of Engineering Technologies and Management Research, 2020 DOI:10.29121/ijetmr.v1.i1.2015.23

[95]	Study and development of aluminium metal matrix composite with SiC using stir casting process eTIME-2019 – INTERNATIONAL CONFERENCE ON EMERGING TRENDS IN MECHANICAL ENGINEERING, 2020 DOI:10.1063/5.0007047

[96]	Selective laser melting of aluminium metal-matrix composites and the challenges Materials Today: Proceedings, 2020 DOI:10.1016/j.matpr.2020.05.086

[97]	Mekanik Alaşımlama Metodu ile Üretilen Al-4.5Cu/SiC Kompozitin Termal ve Mikroyapısal Özelliklerinin İncelenmesi Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, 2020 DOI:10.29109/gujsc.704063

[98]	Mechanical Properties and Wear Characteristic of (Aluminum-Zinc Oxide) Metal Matrix Composite Prepared Using Stir Casting Process Materials Science Forum, 2020 DOI:10.4028/www.scientific.net/MSF.1002.175

[99]	Mechanical and microstructural analysis of Al-Al2O3/B4C hybrid composites Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2020 DOI:10.1177/1464420720942554

[100]	Handbook of Nanomaterials and Nanocomposites for Energy and Environmental Applications 2020 DOI:10.1007/978-3-030-11155-7_182-1

[101]	Processing Methods and Mechanical Properties of Aluminium Matrix Composites Advances in Materials Science and Engineering, 2020 DOI:10.1155/2020/3765791

[102]	Mechanical properties of titanium carbide reinforced aluminum metal matrix composites INTERNATIONAL CONFERENCE ON MECHANICAL, ELECTRONICS AND COMPUTER ENGINEERING: ICMECE 2020, 2020 DOI:10.1063/5.0024764

[103]	Effects of Reinforcement Ratios and Sintering Temperatures on the Mechanical Properties of Titanium Nitride/Nickel Composites Materials, 2020 DOI:10.3390/ma13204473

[104]	Effect of Sintering Temperature on Microstructure and Mechanical Properties of Aluminium Composites IOP Conference Series: Materials Science and Engineering, 2020 DOI:10.1088/1757-899X/912/3/032070

[105]	Comparison studies on mechanical and wear behavior of Stir Cast Al-SiC-B4C metal matrix composites IOP Conference Series: Materials Science and Engineering, 2020 DOI:10.1088/1757-899X/912/5/052003

[106]	Analyzing the Effect of B4C/Al2O3 on the Wear Behavior of Al-6.6Si-0.4Mg Alloy Using Response Surface Methodology International Journal of Surface Engineering and Interdisciplinary Materials Science, 2020 DOI:10.4018/IJSEIMS.2020070105

[107]	Experimental investigation of wear characteristics of aluminium metal matrix composites Materials Today: Proceedings, 2020 DOI:10.1016/j.matpr.2020.03.778

[108]	Experimental investigation of wear characteristics of aluminium metal matrix composites Materials Today: Proceedings, 2020 DOI:10.1016/j.matpr.2020.03.778

[109]	Processing Methods and Mechanical Properties of Aluminium Matrix Composites Advances in Materials Science and Engineering, 2020 DOI:10.1155/2020/3765791

[110]	Structure Property Correlation of In Situ Reinforced Al–based Metal Matrix Composite via Stir Casting Materials Performance and Characterization, 2020 DOI:10.1520/MPC20190038

[111]	An investigation on the impact of SiC/B4C on the mechanical properties of Al-6.6Si-0.4Mg alloy Materials Today: Proceedings, 2020 DOI:10.1016/j.matpr.2019.12.359

[112]	Mechanical and microstructural analysis of Al-Al2O3/B4C hybrid composites Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2020 DOI:10.1177/1464420720942554

[113]	Mechanical Properties and Wear Characteristic of (Aluminum-Zinc Oxide) Metal Matrix Composite Prepared Using Stir Casting Process Materials Science Forum, 2020 DOI:10.4028/www.scientific.net/MSF.1002.175

[114]	Mechanical Properties and Wear Characteristic of (Aluminum-Zinc Oxide) Metal Matrix Composite Prepared Using Stir Casting Process Materials Science Forum, 2020 DOI:10.4028/www.scientific.net/MSF.1002.175

[115]	Experimental investigation of wear characteristics of aluminium metal matrix composites Materials Today: Proceedings, 2020 DOI:10.1016/j.matpr.2020.03.778

[116]	Effects of Stirring Duration and Casting Temperature in Ultrasonic Assisted Stir Casting of Al A356 Matrix Composites Politeknik Dergisi, 2020 DOI:10.2339/politeknik.629473

[117]	Mekanik Alaşımlama Metodu ile Üretilen Al-4.5Cu/SiC Kompozitin Termal ve Mikroyapısal Özelliklerinin İncelenmesi Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, 2020 DOI:10.29109/gujsc.704063

[118]	The comparative study of conventional and ultra-high frequency induction sintering behavior of pure aluminum International Advanced Researches and Engineering Journal, 2020 DOI:10.35860/iarej.729395

[119]	Hafif Metal Ana Fazlı Kompozit Malzeme Üretim Sisteminin Tasarım, İmalat Ve Performansının İncelenmesi Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, 2019 DOI:10.29109/gujsc.414933

[120]	Production and characterization of SiC reinforced aluminum alloy matrix composites from waste beverages cans Journal of Metals, Materials and Minerals, 2019 DOI:10.55713/jmmm.v29i4.535

[121]	Preparation and Characterization of AA6061 Aluminum Alloy Composite Reinforced With Different Contents of Blast-Furnace Slag by Powder Metalurgy MRS Advances, 2019 DOI:10.1557/adv.2019.387

[122]	Evaluation of hardness and impact strength of aluminium alloy (LM6)–soda–lime composite Australian Journal of Mechanical Engineering, 2019 DOI:10.1080/14484846.2019.1601542

[123]	Energy Generation using Reverse Electrodialysis SpringerBriefs in Applied Sciences and Technology, 2019 DOI:10.1007/978-981-13-6374-0_62

[124]	Mechanical properties of Al–Si–SiC composites Materials Research Express, 2019 DOI:10.1088/2053-1591/ab1521

[125]	An Investigation of the Mechanical Properties of HybridComposites in Applications of Automotive Industry Materials Today: Proceedings, 2019 DOI:10.1016/j.matpr.2019.05.172

[126]	Mechanical characteristics of Al-Al2O3-SiC metal matrix composites made by stir casting technique IOP Conference Series: Materials Science and Engineering, 2019 DOI:10.1088/1757-899X/653/1/012005

[127]	Hafif Metal Ana Fazlı Kompozit Malzeme Üretim Sisteminin Tasarım, İmalat Ve Performansının İncelenmesi Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, 2019 DOI:10.29109/gujsc.414933

[128]	Evaluation of Mechanical and Metallurgical Properties on Aluminium Hybrid Metal Matrix Composites Materials Today: Proceedings, 2019 DOI:10.1016/j.matpr.2019.07.109

[129]	Silicon carbide (SiC) effect on mechanical properties and corrosion rates on composite Al/SiC and Al-Cu/SiC THE 8TH NATIONAL PHYSICS SEMINAR 2019, 2019 DOI:10.1063/1.5132691

[130]	Dry sliding wear behaviour of Al 7075/Al2O3/B4C composites using mathematical modelling and statistical analysis Materials Research Express, 2019 DOI:10.1088/2053-1591/ab546a

[131]	Parameter optimization and characterization of environmental friendly aluminium hybrid metal matrix composites Materials Research Express, 2019 DOI:10.1088/2053-1591/ab4fb4

[132]	Mathematical Modeling of dry Sliding Wear Behaviour of Stir – Squeeze cast Aluminium Matrix Composite IOP Conference Series: Materials Science and Engineering, 2018 DOI:10.1088/1757-899X/455/1/012008

[133]	A Study of Tribological Behaviour of Aluminum-7075/SiC Metal Matrix Composite Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2018.06.368

[134]	Interactive study on phase morphology and mechanical characteristics of diffusion annealed and age hardened Al7075–steel powder reinforced metal matrix composites Materials Research Express, 2018 DOI:10.1088/2053-1591/aae3ae

[135]	OPTIMIZATION AND ANALYSIS OF DRY SLIDING WEAR BEHAVIOR OF STIR CASTED AlSi6Cu4–TiO2 COMPOSITE USING CENTRAL COMPOSITE DESIGN Surface Review and Letters, 2018 DOI:10.1142/S0218625X19500525

[136]	Simulation of Mushy State Solidification in Stir Casting World Journal of Engineering, 2018 DOI:10.1108/WJE-04-2017-0079

[137]	Latest Research Development in Aluminum Matrix with Particulate Reinforcement Composites – A Review Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2017.11.260

[138]	Parametric study of the dry sliding wear behaviour of AA6082-T6/SiC and AA6082-T6/B4C composites using RSM Journal of Mechanical Science and Technology, 2018 DOI:10.1007/s12206-018-0105-5

[139]	Multi-Response Optimization of Al2024/red mud MMC using Hybrid Taguchi-GRA-Entropy Optimization Technique Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2017.12.048

[140]	Mechanical deformation behavior of aged Al-Cu alloys and innovative Al-Cu metal matrix composite fabricated using stir-casting technique Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2017.12.182

[141]	Investigation on mechanical behavior and material characteristics of various weight composition of SiCp reinforced aluminium metal matrix composite IOP Conference Series: Materials Science and Engineering, 2018 DOI:10.1088/1757-899X/310/1/012082

[142]	Preparation and characterization of ternary alloy (Al-20Cu-10Mg) reinforced aluminium composite Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2017.11.624

[143]	Microstructures and hardness of A356-SiC composites produced by the mechanical stir casting Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2017.10.129

[144]	Preparation and characterization of aluminium-silica metal matrix composite 2018 DOI:10.1063/1.5029681

[145]	Studies on Mechanical Behaviour of Aluminium-Silicon Carbide-Copper Metal Matrix Composite MATEC Web of Conferences, 2018 DOI:10.1051/matecconf/201816601001

[146]	Preparation and Study the Wear Behaviour of Aluminium Hybrid Composite Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2017.11.497

[147]	Influence of single and dual particle reinforcements on the corrosion behavior of aluminum alloy based composites Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2018 DOI:10.1177/1464420716638111

[148]	Analysis of SiC grain size variation and NaCl concentration on the corrosion susceptibility of AA1070 aluminium matrix composites Cogent Engineering, 2018 DOI:10.1080/23311916.2018.1473002

[149]	Effect of Nano-Ceria on Physiognomies of Aluminum-5% Zinc Sacrificial Anode Mehran University Research Journal of Engineering and Technology, 2018 DOI:10.22581/muet1982.1802.11

[150]	Experimental Characterization of Aluminum-Based Hybrid Composites Obtained Through Powder Metallurgy IOP Conference Series: Materials Science and Engineering, 2018 DOI:10.1088/1757-899X/374/1/012036

[151]	Effect of SiC Reinforcement on Microstructure and Mechanical Properties of Aluminum Metal Matrix Composite IOP Conference Series: Materials Science and Engineering, 2018 DOI:10.1088/1757-899X/376/1/012057

[152]	An Experimental and Modeling Study of Synthesis, Consolidation and Aging Behavior of AA2014 Composite Reinforced by TiB2 via Powder Metallurgy Method Transactions of the Indian Institute of Metals, 2018 DOI:10.1007/s12666-018-1375-z

[153]	Mechanical and Wear Behavior of Aluminium-Zircon Sand-Flyash Metal Matrix Composite IOP Conference Series: Materials Science and Engineering, 2018 DOI:10.1088/1757-899X/390/1/012018

[154]	Synthesis, Consolidation and Modelling Study of AA2014-TiB₂ Composite Prepared by Powder Metallurgy (P/M) Method Materials Science Forum, 2018 DOI:10.4028/www.scientific.net/MSF.928.45

[155]	Graphical Representations of Experimental and ANN Predicted Data for Mechanical and Electrical Properties of AlSiC Composite Prepared by Stir Casting Method IOP Conference Series: Materials Science and Engineering, 2018 DOI:10.1088/1757-899X/413/1/012063

[156]	Wear study of Al-SiC metal matrix composites processed through microwave energy 2018 DOI:10.1063/1.5029636

[157]	Dry condition machining performance of T6 treated aluminium matrix composites Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2018.06.383

[158]	Investigation on properties of SiC reinforced Zn-Mg-Cu based Al metal matrix composites - a case study Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2018.06.352

[159]	Comparison of the mechanical and wear behaviour of aluminium alloy with homogeneous and functionally graded silicon nitride composites Science and Engineering of Composite Materials, 2018 DOI:10.1515/secm-2015-0160

[160]	Influence of single and dual particle reinforcements on the corrosion behavior of aluminum alloy based composites Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2018 DOI:10.1177/1464420716638111

[161]	Dry sliding wear behaviour of AA6082-T6/SiC/B4C hybrid metal matrix composites using response surface methodology Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2018 DOI:10.1177/1464420716657114

[162]	Multiobjective optimization of in situ process parameters in preparation of Al-4.5%Cu–TiC MMC using a grey relation based teaching–learning-based optimization algorithm Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2018 DOI:10.1177/0954408917710555

[163]	Role of SiC ceramic particles on the physical and mechanical properties of Al–4%Cu metal matrix composite fabricated via mechanical alloying Journal of Composite Materials, 2017 DOI:10.1177/0021998316673145

[164]	Corrosion Behavior of Recycling Al- Alloy Based Metal Matrix Composites Reinforced by Nano particles Kurdistan Journal of Applied Research, 2017 DOI:10.24017/science.2017.3.49

[165]	Surface Micro Patterning of Aluminium Reinforced Composite through Laser Peening International Journal of Manufacturing, Materials, and Mechanical Engineering, 2017 DOI:10.4018/IJMMME.2017100102

[166]	Experimental investigation of Mg/SiC composite fabrication via friction stir processing The International Journal of Advanced Manufacturing Technology, 2017 DOI:10.1007/s00170-016-9801-z

[167]	Production and mechanical properties of nano SiC particle reinforced Ti–6Al–4V matrix composite Transactions of Nonferrous Metals Society of China, 2017 DOI:10.1016/S1003-6326(17)60009-8

[168]	Role of SiC ceramic particles on the physical and mechanical properties of Al–4%Cu metal matrix composite fabricated via mechanical alloying Journal of Composite Materials, 2017 DOI:10.1177/0021998316673145

[169]	Mechanical and tribological behaviour of tungsten carbide reinforced aluminum LM4 matrix composites Particulate Science and Technology, 2017 DOI:10.1080/02726351.2017.1331285

[170]	Effect of hybrid reinforcement of SiC and Al2O3 in Nylon-6 matrix on mechanical properties of feed stock filament for FDM Advances in Materials and Processing Technologies, 2017 DOI:10.1080/2374068X.2017.1331578

[171]	Multiobjective optimization of in situ process parameters in preparation of Al-4.5%Cu–TiC MMC using a grey relation based teaching–learning-based optimization algorithm Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2017 DOI:10.1177/0954408917710555

[172]	Microstructures and characteristics of solid state recycling aluminium chips AA6061/Al-SiC composites fabricated by cold compaction method 2017 DOI:10.1063/1.4983586

[173]	GRA and ANN Integrated Approach for Photochemical Machining of Al/SiC Composite Materials Today: Proceedings, 2017 DOI:10.1016/j.matpr.2017.07.044

[174]	Influence of Nano TiO2 Particles on the Properties and Behaviour of A356 Aluminium Metal Matrix Composites SAE Technical Paper Series, 2017 DOI:10.4271/2017-28-1986

[175]	Properties of an Al/(Al2O3+TiB2+ZrB2) hybrid composite manufactured by powder metallurgy and hot pressing Journal of Applied Mechanics and Technical Physics, 2017 DOI:10.1134/S0021894417030105

[176]	Manufacturing of AA2124 Aluminum Alloy Metal Matrix Composites Reinforced by Silicon Carbide Processed by Powder Metallurgy Techniques of High Energy Ball Milling and Hot Extrusion Materials Science Forum, 2017 DOI:10.4028/www.scientific.net/MSF.899.25

[177]	Wear performance of garnet aluminium composites at high contact pressure 2016 DOI:10.1063/1.4946312

[178]	Experimental investigations of Al-TiO2-Gr hybrid composites fabricated by stir casting Materials Testing, 2016 DOI:10.3139/120.110839

[179]	Enhancing the Properties of Al–WC Nanocomposites Using Liquid Metallurgy Experimental Techniques, 2016 DOI:10.1007/s40799-016-0015-y

[180]	Abrasive wear behavior of monolithic alloy, homogeneous and functionally graded aluminum (LM25/AlN and LM25/SiO2) composites Particulate Science and Technology, 2016 DOI:10.1080/02726351.2016.1199074

[181]	Modeling and Analysis on the Influence of Reinforcement Particle Size During EDM of Aluminum (Al/3.25Cu/8.5Si)/Fly Ash Composites Journal of Advanced Manufacturing Systems, 2016 DOI:10.1142/S0219686716500141

[182]	Analysis of Stir Cast Aluminium Silicon Carbide Metal Matrix Composite: A Comprehensive Review Procedia Technology, 2016 DOI:10.1016/j.protcy.2016.05.052

[183]	Hybrid materials of aluminium Materials Today: Proceedings, 2016 DOI:10.1016/j.matpr.2016.11.087

[184]	Mechanical properties of Aluminum-Copper(p) composite metallic materials Journal of Applied Research and Technology, 2016 DOI:10.1016/j.jart.2016.05.009

[185]	Comparative Study of Different Materials with Al-Sic for Engine Valve Guide by Using FEM World Journal of Engineering and Technology, 2016 DOI:10.4236/wjet.2016.42023

[186]	Microstructural analysis and tribological behavior of aluminum alloy reinforced with hybrid alumina/nanographite particles Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2015 DOI:10.1177/1350650114556399

[187]	Microstructural Finite Element Modeling and Simulation on Al–MgO Composites International Journal of Computational Methods, 2015 DOI:10.1142/S0219876215500309

[188]	Roughness Analysis of the Holes Drilled on Al / SiC Metal Matrix Composites Using Atomic Force Microscope Applied Mechanics and Materials, 2015 DOI:10.4028/www.scientific.net/AMM.766-767.837

[189]	Analysis of Mechanical Properties and Morphological Study of Coated Ceramics Using Multiwall Carbon Nanotubes with Aluminium Alloy Applied Mechanics and Materials, 2015 DOI:10.4028/www.scientific.net/AMM.766-767.333

[190]	Morphological Study of Coated Silicon Carbide Particle with Multi Wall Carbon Nano Tubes Applied Mechanics and Materials, 2015 DOI:10.4028/www.scientific.net/AMM.766-767.368

[191]	Comparison of microstructure and wear resistance of A356–SiCp composites processed via compocasting and vibrating cooling slope Transactions of Nonferrous Metals Society of China, 2015 DOI:10.1016/S1003-6326(15)63867-5

[192]	Identification of Optimum Composition and Mechanical Properties of Al-Ni Metal Matrix Composite Journal of Minerals and Materials Characterization and Engineering, 2015 DOI:10.4236/jmmce.2015.34035

[193]	Dry sliding wear characterization of Al 6061/rock dust composite Transactions of Nonferrous Metals Society of China, 2015 DOI:10.1016/S1003-6326(15)64036-5

[194]	Wettability of Silicon Carbide Particles by the Aluminium Melts in Producing Al-SiC Composites Advanced Materials Research, 2015 DOI:10.4028/www.scientific.net/AMR.1128.149

[195]	Microstructure and Tribological Properties of Aluminum Matrix Composite Key Engineering Materials, 2015 DOI:10.4028/www.scientific.net/KEM.641.30

[196]	Study on Mechanical Properties of Aluminium Based Metal Matrix Composites by Hybrid Reinforcement Applied Mechanics and Materials, 2015 DOI:10.4028/www.scientific.net/AMM.813-814.116

[197]	Microstructural analysis and tribological behavior of aluminum alloy reinforced with hybrid alumina/nanographite particles Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2015 DOI:10.1177/1350650114556399

[198]	Properties of ceramic-reinforced aluminium matrix composites - a review International Journal of Mechanical and Materials Engineering, 2014 DOI:10.1186/s40712-014-0012-9

[199]	Fabrication and heat treatment of ceramic-reinforced aluminium matrix composites - a review International Journal of Mechanical and Materials Engineering, 2014 DOI:10.1186/s40712-014-0006-7

[200]	Study on Mechanical Properties and Wear Behavior of LM6 Aluminum/Nano Al₂O₃ Composites Applied Mechanics and Materials, 2014 DOI:10.4028/www.scientific.net/AMM.592-594.1352

[201]	Mechanical and Microstructure Characterization of A356 (Al/SiC) MMC Advanced Materials Research, 2014 DOI:10.4028/www.scientific.net/AMR.875-877.135

[202]	Development of Aluminium MMC with Hybrid Reinforcement - A Review Materials Science Forum, 2014 DOI:10.4028/www.scientific.net/MSF.808.109

[203]	Mechanical and Machining Properties Analysis of Al6061-Cu-Reinforced SiC_P Metal Matrix Composite Journal of Minerals and Materials Characterization and Engineering, 2014 DOI:10.4236/jmmce.2014.21009

[204]	Microstructural Studies of Aluminium 7075-Silicon Carbide-Alumina Metal Matrix Composite Advanced Materials Research, 2014 DOI:10.4028/www.scientific.net/AMR.984-985.194

[205]	Machining Behavior of Al6061-Fly Ash Composites Procedia Materials Science, 2014 DOI:10.1016/j.mspro.2014.07.347

[206]	Study of Mechanical Properties & Residual Stresses on Post Wear Samples of A356-SiC Metal Matrix Composites Procedia Materials Science, 2014 DOI:10.1016/j.mspro.2014.07.374

[207]	Effect of Machining Parameters on the Surface Roughness while Turning Particulate Composites Procedia Engineering, 2014 DOI:10.1016/j.proeng.2014.12.266

[208]	Sliding wear of LM25 aluminium alloy with 7.5% SiC+2.5% TiO2 and 2.5% SiC+7.5% TiO2 hybrid composites Journal of Composite Materials, 2014 DOI:10.1177/0021998313496592

[209]	Sliding wear of LM25 aluminium alloy with 7.5% SiC+2.5% TiO2 and 2.5% SiC+7.5% TiO2 hybrid composites Journal of Composite Materials, 2014 DOI:10.1177/0021998313496592

[210]	Preparation of Aluminum Metal Matrix Composite with Novel In situ Ceramic Composite Particulates, Developed from Waste Colliery Shale Material Metallurgical and Materials Transactions B, 2013 DOI:10.1007/s11663-013-9832-x

[211]	Machinability of Aluminum Metal Matrix Composite Reinforced with In-Situ Ceramic Composite Developed from Mines Waste Colliery Shale Materials and Manufacturing Processes, 2013 DOI:10.1080/10426914.2013.811734

[212]	Preparation of Aluminum Metal Matrix Composite with Novel In situ Ceramic Composite Particulates, Developed from Waste Colliery Shale Material Metallurgical and Materials Transactions B, 2013 DOI:10.1007/s11663-013-9832-x

[213]	Investigation of Dry Sliding Wear Behaviour of B4C Particulate Reinforced Mg Matrix Composites Acta Physica Polonica A, 2013 DOI:10.12693/APhysPolA.123.488

[214]	Synthesis and Characterization of A356-SiCpComposite Produced through Vacuum Hot Pressing Materials and Manufacturing Processes, 2013 DOI:10.1080/10426914.2013.773012

[215]	Influence of Reinforcement Type on Microstructure, Hardness, and Tensile Properties of an Aluminum Alloy Metal Matrix Composite Journal of Minerals and Materials Characterization and Engineering, 2013 DOI:10.4236/jmmce.2013.14022

[216]	Surface Modification of SiC Reinforcements & its Effects on Mechanical Properties of Aluminium Based MMC Applied Mechanics and Materials, 2013 DOI:10.4028/www.scientific.net/AMM.446-447.93

[217]	Study of Particle Distribution in Al-SiC Particulate Composite by Random Motion of Mould Key Engineering Materials, 2013 DOI:10.4028/www.scientific.net/KEM.545.188

[218]	Experimental Investigation of Effect of Gear Milling Parameters of Al-B₄C Composite Gears on Surface Roughness Advanced Materials Research, 2013 DOI:10.4028/www.scientific.net/AMR.690-693.2523

[219]	Fabrication and Characterization of Aluminium Matrix Composites by High Velocity Oxy-Fuel Thermal Spraying Advanced Materials Research, 2012 DOI:10.4028/www.scientific.net/AMR.585.317

[220]	Aluminum-Silicon Carbide Composites for Enhanced Physio-Mechanical Properties Advanced Materials Research, 2012 DOI:10.4028/www.scientific.net/AMR.576.370

[221]	Dry sliding wear behaviour of aluminium/alumina/graphite hybrid metal matrix composites Industrial Lubrication and Tribology, 2012 DOI:10.1108/00368791211262499

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

Journals Menu

Home

About SCIRP

Service

Policies