Experimental Strain Investigation of Bolt Torque Effect in Mechanically Fastened Joints

Journals Menu

Follow SCIRP

ISSN Print: 1947-3931
ISSN Online: 1947-394X
www.scirp.org/journal/eng
E-mail: eng@scirp.org

"Experimental Strain Investigation of Bolt Torque Effect in Mechanically Fastened Joints"
written by Nashwan Younis,
published by Engineering, Vol.4 No.7, 2012

has been cited by the following article(s):

[1]	Axial stress measurement for tightened bolt based on the effect of stress on ultrasonic wave attenuation
	Nondestructive Testing and …, 2023

[2]	Solution of the contact task of the elbow orthosis prototype
	International Science Journal of …, 2022

[3]	A New Axial Stress Measurement Method for High-Strength Short Bolts Based on Stress-Dependent Scattering Effect and Energy Attenuation Coefficient
	Sensors, 2022

[4]	Напружено-деформований стан і міцність однозрізних болтових з'єднань елементів конструкцій із композиційних матеріалів
	2019

[5]	The Use of Optical Methods in the Analysis of the Areas with Stress Concentration
	Journal of Mechanical Engineering, 2018

[6]	High-Speed Photography and Digital Optical Measurement Techniques for Geomaterials: Fundamentals and Applications
	Rock Mechanics and Rock Engineering, 2017

[7]	Proposal of Methodology for Verification of Stress Distribution in Bolted Joints by Optical Method.
	Applied Mechanics & Materials, 2015

[8]	Proposal of Methodology for Verification of Stress Distribution in Bolted Joints by Optical Method
	2015

[9]	THE EFFECT OF PERPENDICULARITY ERROR ON STRESS CONCENTRATION FOR CARBON FIBER RENFORCED PLASTIC
	2014

[10]	František Trebuňa", Miroslav Pástor"", Peter Frankovský “, Ján Kostka

[1]	Axial stress measurement for tightened bolt based on the effect of stress on ultrasonic wave attenuation Nondestructive Testing and Evaluation, 2023 DOI:10.1080/10589759.2023.2182882

[2]	Axial stress measurement for tightened bolt based on the effect of stress on ultrasonic wave attenuation Nondestructive Testing and Evaluation, 2023 DOI:10.1080/10589759.2023.2182882

[3]	A New Axial Stress Measurement Method for High-Strength Short Bolts Based on Stress-Dependent Scattering Effect and Energy Attenuation Coefficient Sensors, 2022 DOI:10.3390/s22134692

[4]	The Use of Optical Methods in the Analysis of the Areas with Stress Concentration Strojnícky casopis – Journal of Mechanical Engineering, 2018 DOI:10.2478/scjme-2018-0018

[5]	The Use of Optical Methods in the Analysis of the Areas with Stress Concentration Strojnícky casopis – Journal of Mechanical Engineering, 2018 DOI:10.2478/scjme-2018-0018

[6]	The Use of Optical Methods in the Analysis of the Areas with Stress Concentration Strojnícky casopis – Journal of Mechanical Engineering, 2018 DOI:10.2478/scjme-2018-0018

[7]	High-Speed Photography and Digital Optical Measurement Techniques for Geomaterials: Fundamentals and Applications Rock Mechanics and Rock Engineering, 2017 DOI:10.1007/s00603-016-1164-0

[8]	Proposal of Methodology for Verification of Stress Distribution in Bolted Joints by Optical Method Applied Mechanics and Materials, 2015 DOI:10.4028/www.scientific.net/AMM.816.443

Follow SCIRP