has been cited by the following article(s):
[1]
|
Measurement of elastic modulus of CNT composites: a nondestructive study
|
|
… , Nanotubes and Carbon …,
2022 |
|
|
[2]
|
A Recent Review on Synthesis, Potential Environmental Applications and Socio-Economic Impact of Waste-Derived Carbon Nanotubes
|
|
Novel Applications of …,
2022 |
|
|
[3]
|
Recycling the Plastic Wastes to Carbon Nanotubes
|
|
2021 |
|
|
[4]
|
Waste plastic-derived NiO-MWCNT composite as visible light photocatalyst for degradation of methylene blue dye
|
|
Nanotechnology for Environmental …,
2021 |
|
|
[5]
|
Waste-Derived Nanoparticles: Synthesis Approaches, Environmental Applications, and Sustainability Considerations
|
|
2020 |
|
|
[6]
|
Insight into the effect of lignocellulosic biomass source on the performance of biochar as persulfate activator for aqueous organic pollutants remediation: epicarp and …
|
|
2020 |
|
|
[7]
|
Increase of Mechanical and Thermic Performance of Polymers with Renewable-Base Nanomaterials to Develop Composite for Fiber Reinforced Polymers Industry
|
|
2020 |
|
|
[8]
|
Agro-industrial Waste as Precursor Source for Carbon Nanotubes (CNTs) Synthesis Using a New Technical of Solvent Autoignition
|
|
2020 |
|
|
[9]
|
Behavior of X-Ray Analysis of Carbon Nanotubes
|
|
2019 |
|
|
[10]
|
Carbon Nanotubes as a Resourceful Product Derived from Waste Plastic—A Review
|
|
Waste Management and Resource Efficiency,
2019 |
|
|
[11]
|
Synthesis of carbon nanotubes using biochar as precursor material under microwave irradiation
|
|
2019 |
|
|
[12]
|
Fabrication of Various Carbon Nanotube/Nickel Nanocomposite Powders by Polyol Process
|
|
2019 |
|
|
[13]
|
Synthesis and characterization of multiwalled carbon nanotubes supported LaxCa1-xMnO3 (x= 0.2, 0.3)
|
|
2019 |
|
|
[14]
|
Synthesis, Characterization and General Properties of Carbon Nanotubes
|
|
2018 |
|
|
[15]
|
Process and engineering trends in membrane based carbon capture
|
|
Renewable and Sustainable Energy Reviews,
2017 |
|
|
[16]
|
Superior shuttling of lithium and sodium ions in manganese-doped titania@ functionalized multiwall carbon nanotubes anode
|
|
Nanoscale,
2017 |
|
|
[17]
|
Superior shuttling of lithium and sodium ions in manganese-doped titania@ functionalized multiwall carbon nanotube anodes
|
|
2017 |
|
|
[18]
|
Superior shuttling of lithium and sodium ions in manganese-doped titania@ functionalized multiwall carbon nanotube anodes.
|
|
Nanoscale,
2017 |
|
|
[19]
|
Transforming waste into carbon-based nanomaterials
|
|
Carbon,
2016 |
|
|
[20]
|
Effect of fly ash composition on the synthesis of carbon nanomaterials
|
|
2016 |
|
|
[21]
|
24-10-2023
|
|
|
|
|
[1]
|
Measurement of elastic modulus of CNT composites: a nondestructive study
Fullerenes, Nanotubes and Carbon Nanostructures,
2021
DOI:10.1080/1536383X.2021.1936506
|
|
|
[2]
|
Waste plastic-derived NiO-MWCNT composite as visible light photocatalyst for degradation of methylene blue dye
Nanotechnology for Environmental Engineering,
2021
DOI:10.1007/s41204-021-00163-8
|
|
|
[3]
|
Synthesis and characterization of multiwalled carbon nanotubes supported LaxCa1−xMnO3 (x = 0.2, 0.3)
Materials Research Express,
2020
DOI:10.1088/2053-1591/ab5ec1
|
|
|
[4]
|
Waste-Derived Nanoparticles: Synthesis Approaches, Environmental Applications, and Sustainability Considerations
Frontiers in Chemistry,
2020
DOI:10.3389/fchem.2020.00782
|
|
|
[5]
|
Carbon Nanotubes [Working Title]
2019
DOI:10.5772/intechopen.85156
|
|
|
[6]
|
Waste Management and Resource Efficiency
2019
DOI:10.1007/978-981-10-7290-1_77
|
|
|