Effects of Gas Metal Arc Welding Techniques on the Mechanical Properties of Duplex Stainless Steel

Journals Menu

Follow SCIRP

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org

Google-based Impact Factor: 1.55
Citations

Journals Menu

"Effects of Gas Metal Arc Welding Techniques on the Mechanical Properties of Duplex Stainless Steel"
written by Tanimu Ibrahim, Danjuma S. Yawas, Shekarau Y. Aku,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.5, 2013

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	An Overview on Enhancing Materials' Tribological and Mechanical Characteristics by Using Gas Metal Arc Weld Hardfacing.
	Journal of Engineering Science & Technology …, 2024

[2]	Investigating quality of steel for building construction: A case study of Nigeria steel industries
	AIP Conference …, 2024

[3]	The effects of heat input and electrode type on the mechanical properties of welded A309 stainless steel using a shielded metal arc welding
	Applied Research and …, 2023

[4]	Optimization and statistical modeling of the thermal conductivity of a pumice powder and carbonated coal particle hybrid reinforced aluminum metal matrix composite …
	Functional Composites …, 2023

[5]	Tanimu Kogi Ibrahim, Danjuma Saleh Yawas 2, 3, Bashar Dan‑asabe 2 &
	Scientific Reports, 2023

[6]	Taguchi optimization and modelling of stir casting process parameters on the percentage elongation of aluminium, pumice and carbonated coal composite
	Asabe, AA Adebisi - Scientific Reports, 2023

[7]	Manufacturing and optimization of the effect of casting process parameters on the compressive strength of aluminum/pumice/carbonated coal hybrid composites …
	asabe… - The International Journal …, 2023

[8]	Enhancing mechanical and corrosion qualities using metal inert gas weld hardfacing: a brief review
	Journal of Physics: Conference Series, 2023

[9]	Inhomogeneous microstructure and properties along the thickness of stir zone in friction stir welded SAF 2507 super duplex stainless steel joint
	Journal of Manufacturing …, 2022

[10]	Effect of inhomogeneous fiber structure on the mechanical properties of friction stir welded SAF 2507 super duplex stainless steel
	Materials Chemistry and …, 2022

[11]	Numerical analysis of butt and lap welded titanium reinforced mild steel joints
	Materials Today …, 2021

[12]	The effect of post-weld heat-treatment (PWHT) and vibratory assisted welding (VAW) on hardness of 304L stainless steels material
	International Journal of Advanced …, 2021

[13]	Statistical analysis of the effect of welding parameters on the tensile strength of titanium reinforced mild steel joints using taguchi's DoE
	2021

[14]	Efecto de la aplicación de campo electromagnético sobre la microestructura y propiedades mecánicas de la unión disímil 2205/316L
	2021

[15]	San Nicolás de Hidalgo
	2021

[16]	Investigating mechanical properties of MIG reinforced steel sheets using Titanium Alloy powder
	2020

[17]	RESEARCH DISSERTATION INVESTIGATING MECHANICAL PROPERTIES OF MIG REINFORCED STEEL SHEETS USING TITANIUM ALLOY POWDER
	2020

[18]	GMAW cladding on metals to impart anti-corrosiveness: Machine, processes and materials
	2020

[19]	Analysis of Filler Metal Composition on Weld Dilution of Austenitic Stainless Steel by TIG and MIG Welding.
	2020

[20]	Gas Metal Arc Weld Cladding and its Anti-Corrosive Performance-A Brief Review
	2018

[21]	Analysis of Dissimilar Metal Welding of EN19 and SS304L
	2018

[22]	Improvement of Joint Integrity in MIG Welded Steel: A Review
	2018

[23]	Gas metal arc weld cladding and its anti-corrosive performance: a brief review
	2018

[24]	GRNN-Immune Based Strategy for Estimating and Optimizing the Vibratory Assisted Welding Parameters to Produce Quality Welded Joints
	2017

[25]	ON THE VARIATION OF HARDNESS OF DUPLEX STAINLESS STEEL CLAD LAYER DEPOSITED BY FLUX-CORED ARC WELDING
	2017

[26]	A review on techniques for improving the mechanical properties of fusion welded joints
	2017

[27]	Adsorption
	Interface Science and Technology, 2017

[28]	METHODS TO IMPROVE MECHANICAL PROPERTIES OF WELDED JOINTS: VIEW POINT
	International Journal of Mechanical Engineering and Technology (IJMET), 2016

[29]	On The Variation of Hardness of Duplex Stainless Steel Clad Layer Deposited By Flux-Cored-Cored Arc Welding
	Reason-A Technical Journal …, 2016

[30]	Influence of shot peening parameters on high‐cycle fatigue strength of steel produced by powder metallurgy process
	Fatigue & Fracture of Engineering Materials & Structures, 2015

[31]	Effects of electrode type on the mechanical properties of weldments of some steel samples produced in Nigeria
	World Journal of Engineering, 2014

[32]	El estudio del derecho y las humanidades en la maestría en derecho de la Universidad Michoacana de San Nicolás de Hidalgo
	2013

[1]	Investigating quality of steel for building construction: A case study of Nigeria steel industries INTERNATIONAL CONFERENCE ON RECENT TRENDS IN COMPOSITE SCIENCES WITH COMPUTATIONAL ANALYSIS, 2024 DOI:10.1063/5.0182811

[2]	Evaluating mechanical properties of duplex stainless steel with flux core arc welding: a comparison of welding modes Matéria (Rio de Janeiro), 2024 DOI:10.1590/1517-7076-rmat-2024-0394

[3]	Optimization and statistical modeling of the thermal conductivity of a pumice powder and carbonated coal particle hybrid reinforced aluminum metal matrix composite for brake disc application: a Taguchi approach Functional Composites and Structures, 2023 DOI:10.1088/2631-6331/acc0d1

[4]	Enhancing mechanical and corrosion qualities using metal inert gas weld hardfacing: a brief review Journal of Physics: Conference Series, 2023 DOI:10.1088/1742-6596/2484/1/012018

[5]	Numerical analysis of butt and lap welded titanium reinforced mild steel joints Materials Today: Proceedings, 2021 DOI:10.1016/j.matpr.2020.11.236

[6]	GMAW cladding on metals to impart anti-corrosiveness: Machine, processes and materials Materials Today: Proceedings, 2020 DOI:10.1016/j.matpr.2020.02.518

[7]	GMAW cladding on metals to impart anti-corrosiveness: Machine, processes and materials Materials Today: Proceedings, 2020 DOI:10.1016/j.matpr.2020.02.518

[8]	Influence of shot peening parameters on high‐cycle fatigue strength of steel produced by powder metallurgy process Fatigue & Fracture of Engineering Materials & Structures, 2015 DOI:10.1111/ffe.12324

[9]	Influence of shot peening parameters on high-cycle fatigue strength of steel produced by powder metallurgy process Fatigue & Fracture of Engineering Materials & Structures, 2015 DOI:10.1111/ffe.12324

[10]	Effects of electrode type on the mechanical properties of weldments of some steel samples produced in Nigeria World Journal of Engineering, 2014 DOI:10.1260/1708-5284.11.2.95

Follow SCIRP

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

Journals Menu

Home

About SCIRP

Service

Policies