[1]
|
Effect of quenching media on mechanical properties of welded mild steel plate
|
|
… for Society and …,
2023 |
|
|
[2]
|
A study on effect of sulphur and phosphorous on the mechanical characteristics of C45 steel
|
|
Materials Today: Proceedings,
2022 |
|
|
[3]
|
Energy Reports
|
|
2022 |
|
|
[4]
|
Study of the Effect of Quenchants on the Machinability of Heat Treated Mild-Steel
|
|
Nigerian Journal of …,
2022 |
|
|
[5]
|
Investigation of the mechanical properties of annealing heat treated low carbon steel
|
|
Algerian Journal of …,
2022 |
|
|
[6]
|
Effect of Oil Quenching and Shot Peening to Improve Hardness Behavior of S45C Carbon Steel
|
|
Materials Science …,
2022 |
|
|
[7]
|
Effect of Trace Elements on Hardness and Impact Characteristics of Carbon Steel
|
|
Technology Innovation in Mechanical …,
2022 |
|
|
[8]
|
Sifat Mekanik Dan Kegagalan Material Pada Ekskavator Bucket Teeth
|
|
2022 |
|
|
[9]
|
Simulated microbial corrosion in oil, gas and non-volcanic geothermal energy installations: The role of biofilm on pipeline corrosion
|
|
Energy Reports,
2022 |
|
|
[10]
|
Effect of Microstructure on Electrochemical Properties of the EN S275 Mild Steel under Chlorine-Rich and Chlorine-Free Media at Different pHs
|
|
Metals,
2022 |
|
|
[11]
|
Mechanical characterization of quenched hardened chromoly steel using taguchi coupled WASPAS method
|
|
Materials Today …,
2022 |
|
|
[12]
|
Preface
|
|
Madah: Jurnal Bahasa dan Sastra,
2022 |
|
|
[13]
|
ADHESIONANALYSIS OF DIFFERENTLY DRIEDPRIMERCOATINGSFOR CARBON STEEL CORROSION PROTECTION ANALIZA PRIONJIVOSTI RAZLIČITO …
|
|
2022 |
|
|
[14]
|
PENGARUH HOLDING TIMEDAN MEDIA PENDINGIN PADA PROSES HARDENING TERHADAP KEKERASAN DAN LAJU KOROSI BAJA AISI 410
|
|
Jurnal Teknik Ilmu Dan Aplikasi,
2021 |
|
|
[15]
|
Investigation of Heat Treatment on Mechanical Properties of Medium Carbon Steel
|
|
2021 |
|
|
[16]
|
Effects of Heat Treatment Process on Mechanical Properties of Medium Carbon Steel
|
|
Vietnam Journal of Agricultural Sciences,
2021 |
|
|
[17]
|
Immersion Behavior of Carbon Steel, Phosphate Carbon Steel and Phosphate and Painted Carbon Steel in Saltwater
|
|
2021 |
|
|
[18]
|
Effect of Cooling Rate on Mechanical Properties of ASTM Grade Steel
|
|
2021 |
|
|
[19]
|
Immersion Behavior of Carbon Steel, Phosphate Carbon Steel and Phosphate and Painted Carbon Steel in Saltwater. Materials 2021, 14, 188
|
|
2021 |
|
|
[20]
|
Effects of Heat Treatment on the Corrosion and Mechanical Properties of Stainless Steel 316L as Used in Biomedical Applications
|
|
2021 |
|
|
[21]
|
Evaluation of Mechanical Properties by Grain Refining of Low Carbon Steel Under Various Cooling Media
|
|
2021 |
|
|
[22]
|
EFFECTIVENESS OF BIODEGRADABLE OILS AS QUENCHING MEDIA FOR COMMERCIAL ALUMINIUM
|
|
2020 |
|
|
[23]
|
Sustaining behavior of sintered forged aluminum powder specimens made by unconventional die
|
|
2020 |
|
|
[24]
|
COMPARATIVE EFFECT OF QUENCHING MEDIA ON THE MECHANICAL PROPERTIES OF CAST ALUMINUM ALLOY
|
|
2020 |
|
|
[25]
|
Improvement of the Method for the High-Carbon Wire Rod Pearlite Grain Grade Identification
|
|
2020 |
|
|
[26]
|
Performance analysis on synthesized reinforced carbon steel for structural applications
|
|
2020 |
|
|
[27]
|
Optimization of heat treatment parameters of medium carbon steel quenched in different media using Taguchi method and grey relational analysis
|
|
2020 |
|
|
[28]
|
Effects of Heat Treatment on the Corrosion Behavior of ASTM A-36 Steel
|
|
2020 |
|
|
[29]
|
The Effect of Cooling Media on Tensile Strength of Medium Carbon Steel in Post Welding Process Using Electric Welding (SMAW) with E7018 Electrodes
|
|
2020 |
|
|
[30]
|
Corrosion Behaviour of Heat Treated and Nickel Plated Mild Steel in Citrus Fruit: Lime and Lemon
|
|
2019 |
|
|
[31]
|
Mechanical Properties Control Of Low And Medium Carbon Steel Using Feed Forward Neural Networks
|
|
2019 |
|
|
[32]
|
Corrosion Behaviour of Mild Steel
|
|
International Journal of Research in Engineering and Science,
2019 |
|
|
[33]
|
Comparative Analysis of Selected Animal and Vegetable Oils Suitability in Machining of Plain Carbon Steels
|
|
2019 |
|
|
[34]
|
Effect Of Different Quenching Media On Mechanical Properties Of Aisi 1018 Low Carbon Steel
|
|
2019 |
|
|
[35]
|
Mechanical Properties of Heat-treated Medium Carbon Steel in Renewable and Biodegradable Oil
|
|
2019 |
|
|
[36]
|
Investigating the Quality and Conformity of Carbon Steel AISI 1035 under Varying Heat Treatment Conditions
|
|
2019 |
|
|
[37]
|
Vegetable oil quenchants: a review
|
|
2019 |
|
|
[38]
|
ADHESIVE WEAR BEHAVIOR OF AISI 1018 LOW CARBON STEEL UNDER DIFFERENT QUENCHING MEDIA
|
|
International Journal of Mechanical Engineering and Technology (IJMET),
2019 |
|
|
[39]
|
Effect of Cooling System on the Mechanical Properties and Residual Stress of Steel AISI 1045 in Quenching Heat Treatment
|
|
2019 |
|
|
[40]
|
Evaluation of Mechanical Properties of AISI 5140 steel using a Blend of Biodegradable Oils with Quench Accelerators
|
|
IOSR Journal of Engineering,
2018 |
|
|
[41]
|
The effect of polymeric quenching media on mechanical properties of medium carbon steel
|
|
2018 |
|
|
[42]
|
Повышение качества оценки микроструктуры высокоуглеродистой катанки
|
|
2018 |
|
|
[43]
|
TENSILE STRENGTH AND MICROSTRUCTURAL BEHAVIOUR OF MEDIUM CARBON STEEL QUENCHED IN SOME SELECTED MEDIA
|
|
International Journal of Civil Engineering and Technology (IJCIET),
2018 |
|
|
[44]
|
MATERIAL POWER INFLUENCE OF BUCKET TEETH EXCAVATORAISI 4140USING ABRASIVE WEAR TEST WITH OGOSHI UNIVERSAL HIGH SPEEDTESTINGMETHOD
|
|
GLOBAL JOURNAL OF ADVANCED ENGINEERING TECHNOLOGIES ANDSCIENCES,
2018 |
|
|
[45]
|
Effect of Heat Treatment Parameters on Mechanical Properties of Medium Carbon Steel
|
|
2018 |
|
|
[46]
|
Conceptual design and computational analysis of new school desk
|
|
2018 |
|
|
[47]
|
Pengaruh Substrat Terhadap Kekerasan Lapisan NiCoCrAlY Yang Terdeposisi Dengan Teknik HVOF [Effect of Different Substrate on Hardness Properties of …
|
|
2018 |
|
|
[48]
|
Effects of Local Cooling Media on the Mechanical Properties of Heat Treated Mild Steel
|
|
2018 |
|
|
[49]
|
Computational Design of a Novel Medium-Carbon, Low-Alloy Steel Microalloyed with Niobium
|
|
Journal of Materials Engineering and Performance,
2018 |
|
|
[50]
|
Heat Treatment, Mechanical Properties and Microstructure of T-Joint Steel Arc Welded
|
|
Applied Mechanics and Materials,
2018 |
|
|
[51]
|
Analysis of AISI material power of AISI 4140 bucket teeth excavator using influence of abrasive wear
|
|
AIP Conference Proceedings,
2018 |
|
|
[52]
|
Effects of Quenchants on Impact Strength of Single-Vee Butt Welded Joint of Mild Steel
|
|
IOP Conference Series: Materials Science and Engineering,
2018 |
|
|
[53]
|
MATERIAL POWER INFLUENCE OF BUCKET TEETH EXCAVATORAISI 4140 USING ABRASIVE WEAR TEST WITH OGOSHI UNIVERSAL HIGH SPEED TESTINGMETHOD
|
|
Global Journal of Advance Engineering Technology and Sciences,
2018 |
|
|
[54]
|
Studies of the Properties and Microstructure of Heat Treated 0.27% C and 0.84% Mn Steel
|
|
2018 |
|
|
[55]
|
Methodology of High-Carbon Wire Rod Perlite Grain Grade Identification
|
|
Solid State Phenomena,
2018 |
|
|
[56]
|
Comparison of Mechanical Properties of Austempered, Normalized and As-Weld Carbon Steel Weldment
|
|
International Journal of Advanced Engineering, Management and Science (IJAEMS) ,
2018 |
|
|
[57]
|
TENSILE STRENGTH AND MICRO-STRUCTURAL BEHAVIOUR OF MEDIUM CARBON STEEL QUENCHED IN SOME SELECTED MEDIA
|
|
International Journal of Civil Engineering and Technology,
2018 |
|
|
[58]
|
Effect of Addition CuO Nanoparticle to Quenching Media on Properties of Medium Carbon Steel
|
|
Engineering and Technology Journal,
2017 |
|
|
[59]
|
Performance Evaluation Of Africa Elemi, Melon And Africa Locust Bean Oil As Potential Quenchants For Medium Carbon Steel
|
|
2017 |
|
|
[60]
|
Mechanical Properties Improvement Evaluation of Medium Carbon Steels Quenched in Different Media
|
|
International Journal of Engineering Research in Africa,
2017 |
|
|
[61]
|
Wear Behavior of Spherodized Cementite in Hyper Eutectoid Plain Carbon Steel
|
|
2017 |
|
|
[62]
|
Vegetable Oils as Metal Quenchants: A Comprehensive Review
|
|
2017 |
|
|
[63]
|
Investigation of Influence of Quenching and Annealing on the Plane Fracture Toughness and Brittle to Ductile Transition Temperature of the Zinc Coated Structural …
|
|
International Journal of Surface Engineering and Interdisciplinary Materials Science (IJSEIMS),
2017 |
|
|
[64]
|
Mechanical properties of bitumen quenched dual phase steel
|
|
2017 |
|
|
[65]
|
Effect of Different Quenching Media on Microstructure, Hardness, and Wear Behavior of Steel Used in Petroleum Industries
|
|
2017 |
|
|
[66]
|
Developing of Mechanical Properties for Reinforcing Bar Steel through Heat Treating with Various Cooling Media
|
|
Solid State Phenomena,
2017 |
|
|
[67]
|
Evaluation of Mechanical Properties of Medium Carbon Low Alloy Forged Steels by Polymer Quenching
|
|
2017 |
|
|
[68]
|
Mechanical Properties of Bitumen Quenched Dual Phase Steel (Sifat Mekanik Bitumen Lindap Keluli Dual Fasa)
|
|
2017 |
|
|
[69]
|
Evaluation of mechanical properties of medium carbon low alloy forged steels quenched in water, oil and polymer
|
|
J. Mater. Sci. Eng,
2017 |
|
|
[70]
|
Penanggung Jawab
|
|
2016 |
|
|
[71]
|
The Application of Expanded Polystyrene (EPS) Foam as Pattern Material in Sand Casting of a Logo
|
|
2016 |
|
|
[72]
|
SMART PRELOADING OF AN AUTOMOBILE CAM CHAIN STATION
|
|
2016 |
|
|
[73]
|
Heat treatment and mechanical characterisation Of dual phase (ferrite-martensite) medium carbon Low alloy steels
|
|
2016 |
|
|
[74]
|
Study of Mechanical Properties of Steel Quenched in a Blend of Biodegradable Oils with Quench Accelerators
|
|
2016 |
|
|
[75]
|
A Study on the Tensile Test Properties of Medium Carbon Steel Specimens Under Specific Manufacturing Conditions
|
|
2016 |
|
|
[76]
|
Effect of Tempering Temperature and Tempering Time on ASTM A36 Carburized Steel
|
|
Thesis,
2016 |
|
|
[77]
|
Intensifying the Mechanical Properties of Is-4454/1981 Spring Steel Material
|
|
Asian Journal of Research in Social Sciences and Humanities,
2016 |
|
|
[78]
|
Effects of Thermal Treatment on Mechanical Properties and Grain size of En8 Steel
|
|
2016 |
|
|
[79]
|
Effect of Quenching Media on Mechanical Properties for Medium Carbon Steel
|
|
Int. Journal of Engineering Research and Application,
2016 |
|
|
[80]
|
Asian Research Consortium
|
|
2016 |
|
|
[81]
|
COMPARISON OF MECHANICAL PROPERTIES OF DUAL PHASE STEEL FOR DIFFERENT QUENCHING MEDIUMS
|
|
International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ,
2015 |
|
|
[82]
|
Effect of Heat Treatment on Microstructure and Mechanical Properties of SAE 1025 Steel: Analysis by one-way ANOVA
|
|
2015 |
|
|
[83]
|
EFFECTS OF VARIOUS QUENCHING MEDIA ON MECHANICAL PROPERTIES OF ANNEALED 0.509 Wt% C–0.178 Wt% Mn STEEL
|
|
Nigerian Journal of Technology,
2015 |
|
|
[84]
|
EFFECT OF VEGETABLE OIL QUENCHANTS ON THE PROPERTIES OF ALUMINUM DURING SOLUTION HEAT TREATMENT
|
|
Journal of Mechanical Engineering and Sciences,
2015 |
|
|
[85]
|
A Study on the Effect of Heat on Properties of Reinforcing Steel Bars made from Scrap Metal
|
|
2015 |
|
|
[86]
|
TENSILE PROPERTIES OF PRE-HEATED BITUMEN QUENCHED DUAL PHASE MEDIUM CARBON STEEL
|
|
UNILAG JOURNAL OF MEDICINE, SCIENCE AND TECHNOLOGY,
2015 |
|
|
[87]
|
Experimental Investigation on Characteristic Study of the Carbon Steel C45 in Different Working Conditions Using Toughness Test
|
|
International Journal of Modern Engineering Research,
2015 |
|
|
[88]
|
An Assessment of the Microstructure and Mechanical Properties of 0.26% Low Carbon Steel under Different Cooling Media: Analysis by one-way ANOVA
|
|
Industrial Engineering Letters,
2014 |
|
|
[89]
|
Experimental Analysis of Temperature Distribution in Machining Operation
|
|
TK Ajiboye, AGF Alabi, AM Abioye - rspublication.com,
2014 |
|
|
[90]
|
Effect of immersion speed on the mechanical properties and micro-structure of oil quenched AISI 1020 steel
|
|
Journal of Engineering and Technology Research,
2014 |
|
|
[91]
|
Effect of tempering temperature on mechanical properties of medium carbon steel
|
|
2014 |
|
|
[92]
|
A STUDY ON THE MECHANICAL PROPERTIES OF S45C MEDIUM TYPE CARBON STEEL SPECIMENS UNDER LATHE MACHINING AND QUENCHING CONDITIONS
|
|
2014 |
|
|
[93]
|
Assessment Of Mechanical Properties Of Reinforcing Steel Used In Construction Works At FCT, Abuja.
|
|
2013 |
|
|
[94]
|
Assessment of mechanical properties of reinforcing steel used in construction works at FC TAbuja
|
|
2013 |
|
|
[95]
|
Investigating the mechanical properties of post weld heat treated 0.33% C low alloy steel
|
|
2013 |
|
|
[96]
|
Effect of Titanium Addition on Behavior of Medium Carbon Steel
|
|
Journal of Minerals and Materials Characterization and Engineering,
2012 |
|
|
[97]
|
Behavior of Mild Steel Corrosion
|
|
|
|
|