Effect of FCAW Process Parameters on Weld Bead Geometry in Stainless Steel Cladding

Journals Menu

Follow SCIRP

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org

Google-based Impact Factor: 1.55
Citations

Journals Menu

"Effect of FCAW Process Parameters on Weld Bead Geometry in Stainless Steel Cladding"
written by V. Vasantha Kumar, N. Murugan,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.9, 2011

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Investigation on effects of parameters of GMAW process on bead geometry, hardness and microstructure of AISI 410 steel weldments
	2021

[2]	Application of flux cored arc welding (fcaw) without pre-heating for heavy structures in ship building fabrication & construction of heavy offshore structural steels
	2020

[3]	Performance characteristics of GMAW process parameters of multi-bead overlap weld claddings
	2020

[4]	Investigating the effect of pilot errors and its probability to change trajectory parameters during maneuvers
	2019

[5]	STUDY ON THE FAILURES OF WELD JOINTS OF ROOF HOOPS & BIAS MEMBERS IN THE PROJECT JEWEL ROOF CONSTRUCTION AND APPLICATION OF …
	2019

[6]	Cladding of Mild Steel Plates Using GMAW Process
	International Journal of Emerging Technologies in Engineering Research (IJETER), 2018

[7]	Development of Mathematical Models for Prediction of Weld Bead Geometry of GTAW Stainless Steel
	2017

[8]	Application of RSM to Optimize MIG welding Process Parameters for Hardness
	International Journal of Emerging Technologies in Engineering Research(IJETER), 2017

[9]	Weld Bead Geometry Dimensions Measurement based on Pixel Intensity by Image Analysis Techniques
	Journal of The Institution of Engineers (India): Series C, 2017

[10]	Optimization of MIG Welding Process Parameters: A Review
	Research Journal of Engineering and Technology, 2017

[11]	Parametric analysis of the stringer bead reinforcement area and prediction of the number of beads in a single-V butt joint, using the robotic Flux-cored arc welding …
	The International Journal of Advanced Manufacturing Technology, 2017

[12]	Optimization of surface appearance for wire and arc additive manufacturing of Bainite steel
	The International Journal of Advanced Manufacturing Technology, 2016

[13]	Effects of process parameters and thermo-mechanical simulation of GMAW process for welding of 3Cr12 steel
	International Journal of Agricultural Sustainability, 2016

[14]	Parametric analysis of the stringer bead reinforcement area and prediction of the number of beads in a single-V butt joint, using the robotic Flux-cored arc welding …
	The International Journal of Advanced Manufacturing Technology, 2016

[15]	Statistical study of a 308L austenitic steel deposit in SAE 1020 steel
	2016

[16]	EFFECTS OF WELDING CURRENT AND ARC VOLTAGE ON FCAW WELD BEAD GEOMETRY
	International Journal of Research in Engineering and Technology, 2015

[17]	Multi–objective optimisation of FCAW parameters using grey–based Taguchi with entropy technique
	International Journal of Industrial and Systems Engineering, 2015

[18]	Groove configurations of a flux-cored arc welding process used in critical structures of precision mechanical presses—mechanical and metallurgical studies
	The International Journal of Advanced Manufacturing Technology, 2015

[19]	Influence of Welding Process Parameters on Bead Geometry-A Review
	Journal of Mechanical and Mechanics Engineering, 2015

[20]	Multi-Objective Optimization Of Bead Geometry And Dilution In FCAW Process Using PSO
	International Journal of Applied Engineering Research, 2014

[21]	Development of mathematical model with a genetic algorithm for automatic GMA welding process
	The International Journal of Advanced Manufacturing Technology, 2014

[22]	Optimization of flux-cored arc welding process parameters by using genetic algorithm
	The International Journal of Advanced Manufacturing Technology, 2014

[23]	Διεξαγωγή μετωπικών συγκολλήσεων FCAW διφασικών χαλύβων FCA με χρήση του αυτοματοποιημένου συγκολλητικού βραχίονα IGM RT 330.1
	2014

[24]	Welding Procedures Specification for FCAW of Wind Towers
	NC de Matos, 2012

[25]	Correlation between Process Variables in Shielded Metal-Arc Welding (SMAW) Process and Post Weld Heat Treatment (PWHT) on Some Mechanical Properties of Low Carbon Steel Welds
	Journal of Minerals and Materials Characterization and Engineering, 2012

[26]	Towards autonomous mobile robotic welding: Theoretical development and empirical validation
	ProQuest Dissertations Publishing, 2012

[1]	Optimization of friction stir process parameters for enhanced mechanical properties in surface-alloyed ZK60 magnesium with Tin (Sn): an RSM-ANN hybrid approach Production & Manufacturing Research, 2024 DOI:10.1080/21693277.2024.2366870

[2]	Application of metal cored filler wire for environmental-friendly welding of low alloy steel: experimental investigation and parametric optimization International Journal on Interactive Design and Manufacturing (IJIDeM), 2024 DOI:10.1007/s12008-024-01780-8

[3]	Optimization of friction stir process parameters for enhanced mechanical properties in surface-alloyed ZK60 magnesium with Tin (Sn): an RSM-ANN hybrid approach Production & Manufacturing Research, 2024 DOI:10.1080/21693277.2024.2366870

[4]	Influence of Regulated Metal Deposition and Gas Metal Arc Welding on ASTM A387-11–2 Steel Plates: As-deposited Inspection, Microstructure, and Mechanical Properties Journal of Materials Engineering and Performance, 2023 DOI:10.1007/s11665-022-07185-6

[5]	Influence of Regulated Metal Deposition and Gas Metal Arc Welding on ASTM A387-11–2 Steel Plates: As-deposited Inspection, Microstructure, and Mechanical Properties Journal of Materials Engineering and Performance, 2022 DOI:10.1007/s11665-022-07185-6

[6]	Performance characteristics of GMAW process parameters of multi-bead overlap weld claddings IOP Conference Series: Materials Science and Engineering, 2020 DOI:10.1088/1757-899X/988/1/012013

[7]	Prediction of Flux Core Arc Welding (FCAW) Bead Geometry and Welding Parameters for 1G Position International Journal of Materials, Mechanics and Manufacturing, 2017 DOI:10.18178/ijmmm.2017.5.1.289

[8]	Development of Mathematical Models for Prediction of Weld Bead Geometry of GTAW Stainless Steel Applied Mechanics and Materials, 2017 DOI:10.4028/www.scientific.net/AMM.867.88

[9]	Effects of process parameters and thermo-mechanical simulation of GMAW process for welding of 3Cr12 steel Advances in Materials and Processing Technologies, 2016 DOI:10.1080/2374068X.2016.1243406

[10]	Groove configurations of a flux-cored arc welding process used in critical structures of precision mechanical presses—mechanical and metallurgical studies The International Journal of Advanced Manufacturing Technology, 2015 DOI:10.1007/s00170-014-6766-7

Follow SCIRP

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

Journals Menu

Home

About SCIRP

Service

Policies