|
[1]
|
Microstructural characteristics and deformation behaviors of an Al–Mg–Si alloy with improved strength and conductivity processed by continuous casting and …
|
|
Journal of Materials …,
2023 |
|
|
|
|
[2]
|
Effects of Ferro-Silicon addition, heat-treatment and plastic deformation on corrosion resistance of 6063 Aluminum Alloy
|
|
Nigerian Journal of Technology,
2022 |
|
|
|
|
[3]
|
The Effect of Strain Hardening on Mechanical Properties of Line Pipes for the Application of Pressure-Containing Sleeves
|
|
Journal of Pipeline Systems …,
2022 |
|
|
|
|
[4]
|
EFFECTS OF FERRO-SIUCON ADDITION, COLD ROLLING AND HEAT-TREATMENT ON POST-DEFORMATION QUALITY AND CORROSION BEHAVIOUR …
|
|
Annals of the Faculty of Engineering …,
2022 |
|
|
|
|
[5]
|
A new development of four-point method to measure the electrical resistivity in situ during plastic deformation
|
|
2021 |
|
|
|
|
[6]
|
Trace Impurity effect on the precipitation behaviuor of commercially pure aluminium through repeated melting
|
|
European Journal of Materials Science and …,
2020 |
|
|
|
|
[7]
|
Table top experimental setup for electrical contact resistance measurement during indentation
|
|
2020 |
|
|
|
|
[8]
|
TRACE IMPURITY EFFECT ON THE PRECIPITATION BEHAVIOUR OF COMMERCIALLY PURE ALUMINIUM THROUGH REPEATED MELTING
|
|
2020 |
|
|
|
|
[9]
|
Effects of process parameters on the formability of sheet metal during plastic injection forming
|
|
2020 |
|
|
|
|
[10]
|
Electrical And Mechanical Properties Of Iron-Ceramic Composites
|
|
2020 |
|
|
|
|
[11]
|
Change in the Mechanical and Electrical Properties of Aluminium 6063 Alloy under Cold Forging Process
|
|
2020 |
|
|
|
|
[12]
|
Comportamiento Mecánico y Microestructural de la Aleación AlMgSi para Conductores Eléctricos
|
|
2019 |
|
|
|
|
[13]
|
Thermoelectric Method of Plastic Deformation Detection
|
|
Materials Science Forum,
2018 |
|
|
|
|
[14]
|
Encyclopedia of aluminum and its alloys, two-volume set (print)
|
|
2018 |
|
|
|
|
[15]
|
Al-Mg-Si: Microstructural Analysis
|
|
Encyclopedia of Aluminum and Its Alloys, Two …,
2018 |
|
|
|
|
[16]
|
Etude et caractérisation de la réaction de recristallisation des fils d'aluminium tréfilés industriellement à ENI CA. BISKRA.
|
|
2017 |
|
|
|
|
[17]
|
Microwave methods for additive layer m anufacturing
|
|
2017 |
|
|
|
|
[18]
|
Etude et caractérisation de la réaction de recristallisation des fils d'aluminium tréfilés industriellement à ENI CA. BISKRA
|
|
2017 |
|
|
|
|
[19]
|
Microwave Methods for Additive Layer Manufacturing
|
|
2017 |
|
|
|
|
[20]
|
Effect of Surface Stresses on Microwave Surface Resistance and Its Impact for Cavity Perturbation Measurements
|
|
2017 |
|
|
|
|
[21]
|
Potential drop method for online crack length measurement during fracture testing: Development of a correction procedure
|
|
Engineering Fracture Mechanics,
2017 |
|
|
|
|
[22]
|
Sac Metallerin Şekillendirilmesinde Farklı bir Uygulama: Plastik Enjeksiyon Kalıplamada Akışkan Basıncıyla Alüminyum Sacın Şekillendirilmesi
|
|
Çukurova University Journal of the Faculty of Engineering and Architecture,
2017 |
|
|
|
|
[23]
|
Enhanced strength and electrical conductivity of Al–Mg–Si alloy by thermo-mechanical treatment
|
|
Materials Science and Engineering: A,
2016 |
|
|
|
|
[24]
|
Study of texture, mechanical and electrical properties of cold drawn AGS alloy wire
|
|
2016 |
|
|
|
|
[25]
|
MECHANICAL PROPERTIES AND ELCETROCONDUCTIVITY OF ALUMINUM ALLOYS PROCESSED USING UNIAXIAL COMPRESSION
|
|
International Journal of Innovative Research in Science and Engineering,
2016 |
|
|
|
|
[26]
|
Specialized mechanical properties of pure aluminum by using non-equal channel angular pressing for developing its electrical applications
|
|
Applied Physics A,
2016 |
|
|
|
|
[27]
|
预应变与预时效对 6101 导电铝合金组织与性能的影响
|
|
2016 |
|
|
|
|
[28]
|
Effects of pre-strain and pre-aging treatments on microstructure and properties of 6101 aluminum alloy used for electrical conductor
|
|
有色金属科学与 …,
2016 |
|
|
|
|
[29]
|
Effect of aluminum pre-straining on strength of clinched galvanized SAE1004 steel-to-AA6111-T4 aluminum
|
|
Journal of Materials Processing Technology,
2015 |
|
|
|
|
[30]
|
Effect of cold deformation on the microstructure and properties of Al–Cu–Mg/Bean pod ash nano-particles composites
|
|
Journal of Alloys and Compounds,
2015 |
|
|
|
|
[31]
|
Effect of the Degree of Plastic Deformation on the Electrical Resistance and Thermal Conductivity of Al-Mg-Si Alloy
|
|
Leonardo Electronic Journal of Practices and Technologies,
2014 |
|
|
|
|
[32]
|
Quality inspection of clinched joints of steel and aluminum
|
|
The International Journal of Advanced Manufacturing Technology,
2014 |
|
|
|
|
[33]
|
Studying the Effects of Deformation on Microstructure and Mechanical Behavior of Al-Cu Alloys
|
|
2013 |
|
|
|
|
[34]
|
Relationship between microstructure and cold deformation behavior of aluminum alloys using thermodynamic modeling method
|
|
2013 |
|
|
|
|
[35]
|
Effects of Copper and Magnesium on Microstructure and Hardness of Al-Cu-Mg Alloy
|
|
International Journal of Engineering and Technology,
2013 |
|
|
|
|
[36]
|
Microstructural Characteristics, Deformation Behaviors and Properties of an Al-Mg-Si Alloy Processed by Continuous Casting and Expansion Extrusion
|
|
|
|
|
|
|
[37]
|
Location and quantitative evaluation of impact fatigue defect in metallic component with eddy current thermography
|
|
|
|
|
|
|
[38]
|
Effects of Ferro-Silicon Addition, Cold Rolling and Heat Treatment on Corrosion Resistance of 6063 Aluminium Alloy.
|
|
|
|
|
|