|
[1]
|
Machinability of different cutting tool materials for electric discharge machining: A review and future prospects
|
|
AIP Advances,
2024 |
|
|
|
|
[2]
|
Performance Studies on the Wire Electric Discharge Machining Characteristics of Stellite-6B Superalloys
|
|
Journal of Materials …,
2024 |
|
|
|
|
[3]
|
A review on powders used for PMEDM machining process
|
|
AIP Conference Proceedings,
2024 |
|
|
|
|
[4]
|
Emerging Trends in High-Speed Micro-Machining of Dental Ceramics Through CAD-CAM Systems
|
|
Electro-Micromachining and Microfabrication,
2024 |
|
|
|
|
[5]
|
Effect of Process Parameters on the Performance of Powder Mixed Edm of Ni-BASED Superalloys: a Review
|
|
Surface Review and Letters …,
2023 |
|
|
|
|
[6]
|
Methods for ceramic machining
|
|
Advanced Flexible Ceramics,
2023 |
|
|
|
|
[7]
|
Influence of Microstructure and Alloy Composition on the Machinability of α/β Titanium Alloys. Materials 2023, 16, 688
|
|
Hadad, M Sherif,
2023 |
|
|
|
|
[8]
|
Experimental investigation on EDM of aluminium alloy (Al 2014) using diatomite powder-mixed dielectric fluid based on Taguchi methodology
|
|
Materials Today …,
2023 |
|
|
|
|
[9]
|
Optimizing process parameters for EDM of nimonic C-263 under green dielectric
|
|
Sādhanā,
2023 |
|
|
|
|
[10]
|
Prediction and Optimization of Mold Steel Hardness in Wire Cut Process Based on Fuzzy Inference System
|
|
Journal Of Applied and …,
2023 |
|
|
|
|
[11]
|
Dalma ve Tel Erozyon İle İşlenen Geometrilerin İşleme Parametrelerinde Oluşan Yüzeylerin Deneysel Olarak İncelenmesi
|
|
International Journal of Engineering …,
2023 |
|
|
|
|
[12]
|
Influence of EDM process parameters of novel Al7010/B4C/BN hybrid metal matrix nanocomposite
|
|
Composites Theory and …,
2023 |
|
|
|
|
[13]
|
پیشبینی و بهینهسازی مقدار سختی فوالد قالب در فرایند وایرکات مبتنی بر سیستم استنتاج فازی.
|
|
Journal of Applied & …,
2023 |
|
|
|
|
[14]
|
پیشبینی و بهینهسازی مقدار سختی فولاد قالب در فرایند وایرکات مبتنی بر سیستم استنتاج فازی
|
|
علوم کاربردی و …,
2023 |
|
|
|
|
[15]
|
A critical review on different aspects of electric discharge machining
|
|
Materials Today …,
2023 |
|
|
|
|
[16]
|
An analysis of machining response parameters, crystalline structures, and surface topography during EDM of die-steel using EDM oil and liquid-based viscous …
|
|
Arabian Journal for …,
2023 |
|
|
|
|
[17]
|
Influence of Microstructure and Alloy Composition on the Machinability of α/β Titanium Alloys
|
|
Hadad, M Sherif, KM Ibrahim… - Materials,
2023 |
|
|
|
|
[18]
|
Deposition rate and microhardness analysis on electrical discharge coating of AA7075 using response surface methodology
|
|
International Journal on …,
2023 |
|
|
|
|
[19]
|
Nowoczesność z tradycją–nowe trendy w rozwoju obróbki ubytkowej
|
|
Stal, Metale & Nowe Technologie,
2022 |
|
|
|
|
[20]
|
An insight on Powder Mixed Electric Discharge Machining: A state of the art review
|
|
Proceedings of the …,
2022 |
|
|
|
|
[21]
|
A review on sustainability, health, and safety issues of electrical discharge machining
|
|
Journal of the Brazilian Society of Mechanical …,
2022 |
|
|
|
|
[22]
|
Graphene applications in Unconventional Machining Processes–A review
|
|
Materials Today …,
2022 |
|
|
|
|
[23]
|
Research Article Modeling and Optimization of MRR in Wire Electrical Discharge Machining of Silicon Particle-Reinforced AA6063 Composite
|
|
2022 |
|
|
|
|
[24]
|
ANALYSIS OF A CRYOGENICALLY COOLED NEAR-DRY WEDM PROCESS USING DIFFERENT DIELECTRICS
|
|
Materials and …,
2022 |
|
|
|
|
[25]
|
Wire EDM cutting of Inconel 718 nickel-based superalloy: kerf and MRR analysis
|
|
Multidiscipline Modeling in Materials and Structures,
2022 |
|
|
|
|
[26]
|
Effects of hybrid Al2O3- SiO2 nanoparticles in deionized water on the removal rate and surface roughness during electrical discharge machining of Ti-6Al-4V
|
|
Proceedings of the …,
2022 |
|
|
|
|
[27]
|
Investigation on the Wire Electric Discharge Machining Performance of artificially aged Al6061/B4C composites by Response Surface Method
|
|
Materials Research,
2022 |
|
|
|
|
[28]
|
Modeling and Optimization of MRR in Wire Electrical Discharge Machining of Silicon Particle-Reinforced AA6063 Composite
|
|
Advances in Materials …,
2022 |
|
|
|
|
[29]
|
Surface modification of bio degradable materials through PMEDM–A research perspective
|
|
Materials Today: Proceedings,
2022 |
|
|
|
|
[30]
|
Performance evaluation of electric discharge machining of titanium alloy-a review
|
|
Journal of Engineering …,
2022 |
|
|
|
|
[31]
|
Effect of powder concentration on the EDM performance of AISI 304 using cryotreated post tempered electrodes
|
|
… s aspekta analize konstrukcija, materijala i novih …,
2022 |
|
|
|
|
[32]
|
1 Electrical Machining Discharge (EDM)
|
|
Electric Discharge Hybrid-Machining Processes …,
2022 |
|
|
|
|
[33]
|
Electrical Discharge Machining (EDM)
|
|
Electric Discharge Hybrid-Machining Processes,
2022 |
|
|
|
|
[34]
|
GAP PROFILE MODEL OF ELECTRICAL DISCHARGE MACHINING PROCESS TO PREDICT MATERIAL REMOVAL RATE
|
|
2021 |
|
|
|
|
[35]
|
Influence of process parameters on surface roughness of titanium alloy Ti-6Al-4V through electro discharge machining
|
|
Int Res J Eng Technol,
2021 |
|
|
|
|
[36]
|
Study The Influence of Changing Voltage Values on The Surface Roughness (SR) in The Electrical Discharge Machining Process
|
|
Design Engineering,
2021 |
|
|
|
|
[37]
|
Advancement in the EDM Process: A Critical Review
|
|
Current Advances in …,
2021 |
|
|
|
|
[38]
|
New advancements in electrical discharge machining of metal matrix composite: An overview
|
|
2021 |
|
|
|
|
[39]
|
Characteristics of Raw and Acid-Activated Bentonite and Its Application for Improving Electrical Conductivity of Tap Water
|
|
2021 |
|
|
|
|
[40]
|
Influence of mixed dielectric fluids on material removal performance during electric discharge machining process
|
|
2021 |
|
|
|
|
[41]
|
Effect of Input Parameters on SR and MRR for Tool Steel AISI L2 By Electric Discharge Machine (EDM)
|
|
2021 |
|
|
|
|
[42]
|
A review: Machinability studies on human implant materials
|
|
2021 |
|
|
|
|
[43]
|
State of the art in processing of shape memory alloys with electrical discharge machining: a review
|
|
2021 |
|
|
|
|
[44]
|
Optimization and modeling of material removal rate in wire-EDM of silicon particle reinforced Al6061 composite
|
|
Materials,
2021 |
|
|
|
|
[45]
|
MIRRAX KALIP ÇELİĞİNİN ELEKTRO EROZYON YÖNTEMİ İLE İŞLENEBİLİRLİĞİNİN İNCELENMESİ
|
|
2021 |
|
|
|
|
[46]
|
A review of current researches on powder mixed electrical discharge machining (PMEDM) technology
|
|
2021 |
|
|
|
|
[47]
|
The Effect of Laser Treatment on the Secondary Bonding Behavior of Carbon Fibre Composite
|
|
2020 |
|
|
|
|
[48]
|
Experimental studies on aluminum powder mixed electro discharge machining of ultra-light weight Mg-6Al alloy
|
|
2020 |
|
|
|
|
[49]
|
Effect of Nano Powder Additives in Blended Dielectric For Al6061+ Sic Tool on Edm
|
|
2020 |
|
|
|
|
[50]
|
The manufacturing and the application of polycrystalline diamond tools–A comprehensive review
|
|
2020 |
|
|
|
|
[51]
|
Research on Die Steel Machinability Using Powder Mixed Electric Discharge Machining (PMEDM)
|
|
2020 |
|
|
|
|
[52]
|
An Investigation on Surfactant Added PMWEDM of Inconel 718
|
|
2020 |
|
|
|
|
[53]
|
Recent advances and perceptive insights into powder-mixed dielectric fluid of EDM
|
|
2020 |
|
|
|
|
[54]
|
Enhancement of material removal rate in EDM process using silicon carbide based strenx 900 steel
|
|
2020 |
|
|
|
|
[55]
|
Feasibility of Using CeO 2/Water Dielectrical Nanofluid in Electrical Discharge Machining (EDM)
|
|
2020 |
|
|
|
|
[56]
|
Research on discharge characteristics of working mediums of electric discharge machining
|
|
2020 |
|
|
|
|
[57]
|
Mathematical Modeling and Optimization of Wire Electric Discharge Machining Parameters on Inconel 825 Using Desirability Method
|
|
2020 |
|
|
|
|
[58]
|
Feasibility of Using CeO2/Water Dielectrical Nanofluid in Electrical Discharge Machining (EDM)
|
|
Arabian Journal for …,
2020 |
|
|
|
|
[59]
|
Powder mixed electrical discharge machining (PM-EDM): A methodological review
|
|
2020 |
|
|
|
|
[60]
|
Victrol4003 Mixed Wire Electric Discharge Machining (Wedm) of Optimization for Inconel Alloy 800HT using Taguchi-Grey Relation Analysis
|
|
2020 |
|
|
|
|
[61]
|
Optimisation of process parameters for minimising the surface roughness during wire-electrical discharge machining (WEDM) of silicon particle reinforced al6061 …
|
|
International Journal of …,
2020 |
|
|
|
|
[62]
|
A review on micro electric discharge machining of titanium alloys
|
|
2019 |
|
|
|
|
[63]
|
Investigation of the controllable characteristics of electrical discharge ablation of Ti6Al4V
|
|
2019 |
|
|
|
|
[64]
|
Review on process parameters of WEDM
|
|
A JOURNAL OF COMPOSITION THEORY,
2019 |
|
|
|
|
[65]
|
Influence of tool steel properties on surface quality after electrical discharge machining by wire electrode
|
|
2019 |
|
|
|
|
[66]
|
Micro-EDM Performance Using Different Dielectrics
|
|
2019 |
|
|
|
|
[67]
|
Optimization of process parameters using graphene-based dielectric in electric discharge machining of AISI D2 steel
|
|
2019 |
|
|
|
|
[68]
|
Microfeatures and microfabrication: current role of micro-electric discharge machining
|
|
2019 |
|
|
|
|
[69]
|
Analysis of Machining Pit by using Electrical Discharge Machine Die Sinking
|
|
2018 |
|
|
|
|
[70]
|
Electro-Discharge Machining: Recent Developments and Trends
|
|
International Research Journal of Engineering and Technology,
2018 |
|
|
|
|
[71]
|
Modelling and Characterisation of Electrical Discharge TiC-Fe Cermet Coatings
|
|
2018 |
|
|
|
|
[72]
|
Study on the Influence of Hybridized Powder Mixed Dielectric in Electric Discharge Machining of Alloy Steels
|
|
Materials Today: Proceedings,
2018 |
|
|
|
|
[73]
|
An Insight on Current and Imminent Research Issues in EDM
|
|
2018 |
|
|
|
|
[74]
|
A Comparative Study for Machining of Ti–6Al–4V Alloy for Multi-Criteria Response
|
|
Journal of Advanced Manufacturing Systems,
2018 |
|
|
|
|
[75]
|
Experimental Investigations on the Effect of Hybrid Aluminum and Graphite powders mixed Dielectric in EDM
|
|
Materials Today: Proceedings,
2018 |
|
|
|
|
[76]
|
Experimental Investigation of Wire-EDM Process Parameters for Surface Roughness in the Machining of Carbon Steel 1017 and Aluminum Alloy 6060
|
|
2018 |
|
|
|
|
[77]
|
Modelling of single spark interactions during electrical discharge coating
|
|
Journal of Materials Processing Technology,
2018 |
|
|
|
|
[78]
|
Effects of Process Parameters on Material Removal Rate and Surface Roughness in Wedm of H-13 Die Tool Steel
|
|
Advanced Engineering Forum,
2018 |
|
|
|
|
[79]
|
Micro-Electro Discharge Machining of Holes and Grooves: AnAssessment of Process Parameters
|
|
International Journal of Engineering and Technology (IJET),
2017 |
|
|
|
|
[80]
|
1.11 Micromachining
|
|
2017 |
|
|
|
|
[81]
|
NSGA Optimization of Performance of Powder Mixed EDM
|
|
2017 |
|
|
|
|
[82]
|
Effect of machining parameter on the surface roughness of AISI 304 in silicon carbide powder mixed EDM
|
|
2017 |
|
|
|
|
[83]
|
Fabrication and Machining of Ceramic Composites—A Review on Current Scenario and Future Prospective
|
|
Materials and Manufacturing Processes,
2017 |
|
|
|
|
[84]
|
Effects of bioceramic particles in dielectric of powder-mixed electrical discharge machining on machining and surface characteristics of titanium alloys
|
|
Journal of Materials Processing Technology,
2017 |
|
|
|
|
[85]
|
THE PHENOMENON OF SURFACE MODIFICATION BY ELECTRO-DISCHARGE COATING PROCESS: A REVIEW
|
|
Surface Review and Letters,
2017 |
|
|
|
|
[86]
|
Experimental Investigations into Powder-Mixed Electrical Discharge Machining (PMEDM) of HCHCr D2 Die Steel
|
|
2017 |
|
|
|
|
[87]
|
A parametric optimization of wire-ED turning process parameters on material removal rate of INCONEL 718
|
|
Journal of Mechanical Engineering and Biomechanics,
2017 |
|
|
|
|
[88]
|
Surface modification of biomaterial embedded with pits using die sinker machine
|
|
Scientia Iranica,
2017 |
|
|
|
|
[89]
|
Provided for non-commercial research and educational use. Not for reproduction, distribution or commercial use.
|
|
2017 |
|
|
|
|
[90]
|
Silver and molybdenum disulfide nanoparticles synthesized in situ in dimethylformamide as dielectric for micro-electro discharge machining
|
|
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture,
2017 |
|
|
|
|
[91]
|
Effect of process parameters on the surface crack density of AISI 304 in PMEDM
|
|
World Journal of Engineering,
2017 |
|
|
|
|
[92]
|
Restructured review on Electrical Discharge Machining-A state of the art
|
|
IOP Conference Series: Materials Science and Engineering,
2017 |
|
|
|
|
[93]
|
Influence of Nano Powder Mixed Dielectric Fluid on Surface Finish in Micro Electro Discharge Machining of Zirconia
|
|
Current Nanomaterials,
2017 |
|
|
|
|
[94]
|
Experimental Investigation of Machining Parameters of Powder Mixed EDM and Optimization of MRR, Surface Roughness & Tool Wear Rate Using Taguchi Method
|
|
2016 |
|
|
|
|
[95]
|
1.10 Micro-EDM Drilling of Tungsten Carbide Using Microelectrode with High Aspect Ratio to Improve MRR, EWR, and Hole Quality
|
|
2016 |
|
|
|
|
[96]
|
Optimization of electrical discharge machining parameters of sisic through response surface methodology
|
|
2016 |
|
|
|
|
[97]
|
Investigation on Effects of Untreated and Cryogenically Treated Brass Wire on M42 Hss In WEDM Process
|
|
2016 |
|
|
|
|
[98]
|
Experimental study on the effects of electro-discharge machining process parameters on the fatigue strength of 16MnCr5 steels
|
|
2016 |
|
|
|
|
[99]
|
Optimization of process parameters and dielectric fluids on machining EN 31 by using Topsis
|
|
Int J Eng Res Appl,
2016 |
|
|
|
|
[100]
|
Experimental Study of Process Parameters through Dissimilar Form of Electrodes in EDM Machining
|
|
2016 |
|
|
|
|
[101]
|
INVESTIGATION OF HOLE PROFILES IN DEEP MICRO-HOLE DRILLING OF AISI 420 STAINLESS STEEL USING POWDER-MIXED DIELECTRIC FLUIDS
|
|
2016 |
|
|
|
|
[102]
|
A review of EDM Process for difficult to cut materials
|
|
2016 |
|
|
|
|
[103]
|
Effect of Various Dielectric Fluids on Performance of EDM: A Review
|
|
2016 |
|
|
|
|
[104]
|
بررسی تجربی تاثیر پارامترهای فرآیند ماشینکاری تخلیه الکتریکی بر روی مقاومت به خستگی فولاد 16MnCr5
|
|
2016 |
|
|
|
|
[105]
|
Experimental investigation of the electrolyte type effect on the specifications of electrochemical machining (ECM) of the 304 stainless steel
|
|
2016 |
|
|
|
|
[106]
|
อิทธิพล ของ ผง อะลูมิเนียม ที่ มี ผล ต่อ ความ หยาบ ผิว เหล็กกล้า เครื่องมือ SKD11 ด้วย กระบวนการ PMEDM
|
|
2016 |
|
|
|
|
[107]
|
Electrical discharge grinding of polycrystalline diamond–Effect of wheel rotation
|
|
Preparative Biochemistry & Biotechnology,
2016 |
|
|
|
|
[108]
|
Optimization of Process Parameters in Die Sinking EDM-A Review
|
|
IJSTE - International Journal of Science Technology & Engineering ,
2016 |
|
|
|
|
[109]
|
Analysis of the Influence of EDM Parameters on Material Removal Rate of Low Alloy Steel and Electrode Wear of Copper Electrode
|
|
2016 |
|
|
|
|
[110]
|
Effect of electrical discharge machining on dental Y-TZP ceramic-resin bonding
|
|
Journal of Prosthodontic Research,
2016 |
|
|
|
|
[111]
|
Review of research work in die sinking EDM for machining curved hole
|
|
Journal of the Brazilian Society of Mechanical Sciences and Engineering,
2016 |
|
|
|
|
[112]
|
Experimental Investigation of Machining Parameters of Powder Mixed EDM and Optimization of MRR, Surface Roughness & Tool Wear Rate Using Taguchi Method
|
|
International Journal of Aerospace and Mechanical Engineering,
2016 |
|
|
|
|
[113]
|
A State-of-the-art Review on Micro Electro-discharge Machining
|
|
Procedia Technology,
2016 |
|
|
|
|
[114]
|
Experimental Study of MRR, TWR, SR on SS 316 and AISI D2 steel using Aluminium Electrode on EDM
|
|
2016 |
|
|
|
|
[115]
|
Performance of additive mixed kerosene–servotherm in electrical discharge machining of Monel 400™
|
|
Materials and Manufacturing Processes,
2016 |
|
|
|
|
[116]
|
Optimization of process parameters in die sinking EDM—a review
|
|
Int. J. Sci. Technol. Eng,
2016 |
|
|
|
|
[117]
|
INVESTIGATION OF MATERIAL REMOVAL AND ELECTRODE WEAR RATES IN DEEP MICRO-HOLE DRILLING USING POWDERMIXED DIELECTRIC FLUIDS.
|
|
Journal of the Balkan Tribological Association,
2016 |
|
|
|
|
[118]
|
Optimisation d'un procédé d'usinage par microélectroérosion
|
|
Thesis, UNIVERSITE CLAUDE BERNARD LYON1,
2015 |
|
|
|
|
[119]
|
A review on the use of dielectric fluids and their effects in electrical discharge machining characteristics
|
|
Precision Engineering,
2015 |
|
|
|
|
[120]
|
Research on the influence of dielectric characteristics on the EDM of titanium alloy
|
|
The International Journal of Advanced Manufacturing Technology,
2015 |
|
|
|
|
[121]
|
Influences of Process Parameters on MRR Improvement in Simple and Powder Mixed EDM of AA6061/10% SiC Composite
|
|
Materials and Manufacturing Processes,
2015 |
|
|
|
|
[122]
|
Comparison Performances of EDM on Ti6Al4V with Two Graphite Grades
|
|
2015 |
|
|
|
|
[123]
|
A Fuzzy Multi-criteria Decision-making Model for Green Electrical Discharge Machining
|
|
Proceedings of Fourth International Conference on Soft Computing for Problem Solving,
2015 |
|
|
|
|
[124]
|
Powder Mixed Dielectric in EDM–An overview
|
|
International Journal of Research,
2015 |
|
|
|
|
[125]
|
Experimental Investigation of Electrode Material on MRR, KERF Width and SR in Wire EDM of Pure Titanium
|
|
2015 |
|
|
|
|
[126]
|
Latest Trends in Electro Discharge Machining
|
|
European Journal of Advances in Engineering and Technology,
2015 |
|
|
|
|
[127]
|
Study of Powder Mixed Dielectric in EDM-A Review
|
|
2015 |
|
|
|
|
[128]
|
Parameter optimisation of powder mixed EDM of aluminium-based metal matrix composite using Taguchi and grey analysis
|
|
International Journal of Productivity and Quality Management,
2015 |
|
|
|
|
[129]
|
Powder Mixed Dielectric in EDM—An overview
|
|
2015 |
|
|
|
|
[130]
|
Experimental Investigation on Parametrical Changes and Texture Analysis on Al6063/Al2o3 Metal Matrix Composite by Wire-Cut Electric Discharge …
|
|
2015 |
|
|
|
|
[131]
|
Experimental Investigation on Parametrical Changes and Texture Analysis on Al6063/Al2o3 Metal Matrix Composite by Wire-Cut Electric Discharge Machining …
|
|
2015 |
|
|
|
|
[132]
|
SAF SUDA ELEKTRO EROZYON İLE İŞLEME.
|
|
Engineer & the Machinery Magazine,
2014 |
|
|
|
|
[133]
|
DEVELOPMENT OF THERMO-PHYSICAL MODEL OF POWDER MIXED ELECTRICAL DISCHARGE MACHINE USING FEM AND EXPERIMENTAL …
|
|
2014 |
|
|
|
|
[134]
|
Saf Suda Elektro Erozyon ile İşleme
|
|
2014 |
|
|
|
|
[135]
|
Determination of Material Removal Rate in Electro Discharge Machining through Copper Electrode
|
|
Journal of Mechanical Engineering (JMechE),
2014 |
|
|
|
|
[136]
|
Surface modification of tool steels by electrical discharge treatment in electrolyte
|
|
EJ. Math. Model. Comput. Simul,
2014 |
|
|
|
|
[137]
|
Study on cutting parameter on kerf width using wire electrical discharge machining of Inconel 718
|
|
2014 |
|
|
|
|
[138]
|
Performance Analysis on EDM Using WC with Powder Mixed Dielectric Fluid.
|
|
International Journal of Applied Engineering Research,
2014 |
|
|
|
|
[139]
|
Investigation on Applicability of Diatomite Powder-Mixed Dielectric Fluid in Electrical Discharge Machining Processes
|
|
Proceedings of Sustainable Research and Innovation Conference,
2014 |
|
|
|
|
[140]
|
Effect of Control Parameters in Electrical Discharge Machining-A
|
|
International Journal of R&D in Engineering, Science And Management,
2014 |
|
|
|
|
[141]
|
Performance of Additive Mixed Kerosene-Servotherm in Electrical Discharge Machining of Monel 400TM
|
|
Materials and Manufacturing Processes,
2014 |
|
|
|
|
[142]
|
Experimental study on green electrical discharge machining in tap water of Ti–6Al–4V and parameters optimization
|
|
The International Journal of Advanced Manufacturing Technology,
2014 |
|
|
|
|
[143]
|
Multi-Objective Optimization of Green Electrical Discharge Machining Ti-6Al-4V in Tap Water via Grey-Taguchi Method
|
|
Materials and Manufacturing Processes,
2014 |
|
|
|
|
[144]
|
Power Generator of Electrical Discharge Machining (EDM) System
|
|
Applied Mechanics and Materials,
2014 |
|
|
|
|
[145]
|
SAF SUDA ELEKTRO EROZYON Ä°LE Ä°ÅžLEME
|
|
O Gülcan - Engineer & the Machinery Magazine,
2014 |
|
|
|
|
[146]
|
Electrical discharge precision machining parameters optimization investigation on S-03 special stainless steel
|
|
The International Journal of Advanced Manufacturing Technology,
2014 |
|
|
|
|
[147]
|
SURFACE MODIFFICATION OF TOOL STEELS BY ELECTRICAL DISCHARGE TREATMENT IN ELECTROLYTE
|
|
V Paunov - uctm.edu,
2014 |
|
|
|
|
[148]
|
Influence of Discharge Energy Parameters on S-03 High-Strength Steel for Aerospace Components
|
|
Materials and Manufacturing Processes,
2014 |
|
|
|
|
[149]
|
Modelling of material removal rate in electro discharge machining of nonconductive ZrO₂ Ceramic with kerosene and EDM oil dielectric fluid
|
|
2014 |
|
|
|
|
[150]
|
Multi-objective optimization and analysis of electrical discharge machining process during micro-hole machining of D3 die steel employing salt mixed de …
|
|
2013 |
|
|
|
|
[151]
|
Experimental investigation of EDM parameters on machining AIMg10 15% SiC composite based on Taguchi method
|
|
2013 |
|
|
|
|
[152]
|
Study on Effects of Powder-Mixed Dielectric Fluids on Electrical Discharge Machining Processes
|
|
2013 |
|
|
|
|
[153]
|
Applicability of Diatomite Powder-Mixed Dielectric Fluid in Electrical Discharge Machining Processes
|
|
Int. J. Pure Appl. Sci. Technol,
2013 |
|
|
|
|
[154]
|
A dual response surface-desirability approach to process modeling and optimization of Al2O3 powder-mixed electrical discharge machining (PMEDM) parameters
|
|
The International Journal of Advanced Manufacturing Technology,
2013 |
|
|
|
|
[155]
|
Modeling and analysis of machining parameters for surface roughness in powder mixed EDM using RSM approach
|
|
International Journal of Engineering, Science and Technology,
2013 |
|
|
|
|
[156]
|
极间自混氧改善钛合金电火花加工特性研究
|
|
航空学报,
2013 |
|
|
|
|
[157]
|
Performance Capabilities of EDM machining using Aluminum, Brass and Copper for AISI 304L Material.
|
|
KS Banker, AD Oza, RB Dave - ijaiem.org,
2013 |
|
|
|
|
[158]
|
Multi-objective optimization and analysis of electrical discharge machining process during micro-hole machining of D3 die steel employing salt mixed de-ionized water dielectric
|
|
Journal of Computational and Applied Research in Mechanical Engineering,
2013 |
|
|
|
|
[159]
|
Studies on Recast-layer in EDM using Aluminum Powder Mixed Distilled Water Dielectric Fluid
|
|
International Journal of Engineering and Technology,
2013 |
|
|
|
|
[160]
|
Material Removal Rate, Tool Wear Rate and Surface Roughness Analysis of EDM Process
|
|
2013 |
|
|
|
|
[161]
|
Multi-objective optimization and analysis of electrical discharge machining process during micro-hole machining of D3 die steel employing salt mixed de-ionized water …
|
|
2013 |
|
|
|
|
[162]
|
Experimental investigation of EDM parameters on machining AlMg10 15% SiC composite based on Taguchi method
|
|
2013 |
|
|
|
|
[163]
|
ELECTRICAL DISCHARGE MACHINING OF SILICON CARBIDE USING BRASS ELECTRODE
|
|
Thesis,
2013 |
|
|
|
|
[164]
|
INITIAL®: début d'une nouvelle ère d'instruments endodontiques
|
|
2012 |
|
|
|
|
[165]
|
ENDOPENER: the beginning of a new era in endodontic instrumentation?
|
|
2012 |
|
|
|
|
[166]
|
Performance of electrical discharge machining using aluminium powder suspended distilled water.
|
|
Turkish Journal of Engineering & …,
2012 |
|
|
|
|
[167]
|
Introduction to the New Mega Trends
|
|
New Mega Trends,
2012 |
|
|
|
|
[168]
|
INITIAL?: début d'une nouvelle ère d'instruments endodontiques?
|
|
Roots France,
2012 |
|
|
|
|
[169]
|
Electrode Discharge Machining By Adding Metal Powder to Dielectric Fluid
|
|
O Gülean - Engineer & the Machinery Magazine,
2012 |
|
|
|
|
[170]
|
Performance of electrical discharge machining using aluminium powder suspended distilled water
|
|
Turkish Journal of Engineering and Environmental Sciences,
2012 |
|
|
|
|
[171]
|
Investigating the Effect of copper chromium and aluminum electrodes on EN-31 die steel on electric discharge machine using positive polarity, Vol. 3
|
|
Proceedings of the world congress on engineering,
2012 |
|
|
|
|
[172]
|
Study on optimization and machining characteristics of electric discharge machining using powder suspension dielectric fluids
|
|
2012 |
|
|
|
|
[173]
|
DİELEKTRİK SIVISINA. METAL TOZU KATKILI ELEKTRO EROZYON İLE İşLEME.
|
|
Engineer & the Machinery Magazine,
2012 |
|
|
|
|
[174]
|
An Introduction to Electrical Discharge Machining
|
|
2011 |
|
|
|