|
[1]
|
Tuning the optical, and dielectric properties of PVC/PEO/NiMoO4/MWCNTs/x wt% PANI blended polymers for optoelectronic applications
|
|
naggar, AM Kamal, MB Mohamed - Optical Materials,
2024 |
|
|
|
|
[2]
|
Fabrication and exploration the structural, optical, and dielectric properties of PVP/CMC/MWCNTs/ZnWO4 blends
|
|
naggar… - Ceramics International,
2024 |
|
|
|
|
[3]
|
Effect of MWCNTs and aluminum amount on tuning the optical and electrical properties of PVA/PVP/PEG/ZnCo2-xAlxO4 composites
|
|
naggar, AM Kamal, MB Mohamed - Applied Physics A,
2024 |
|
|
|
|
[4]
|
Breaking Boundaries with Ceramic Matrix Composites: A Comprehensive Overview of Materials, Manufacturing Techniques, Transformative Applications …
|
|
Advances in Materials …,
2024 |
|
|
|
|
[5]
|
Effects of Binary Oxide Coated MWCNTs Toward Tailoring the Mechanical, Thermo-Mechanical, and Microstructural Properties of Pressureless Sintered MgAl2O4 …
|
|
Glass and Ceramics,
2024 |
|
|
|
|
[6]
|
A Review of Biochar Applications in the Non-Agro Sector
|
|
Journal of Materials Engineering, Structures …,
2024 |
|
|
|
|
[7]
|
Improvement on the fabrication OF SiC materials: processing, reinforcing phase, fabricating route—a review
|
|
International Journal of …,
2023 |
|
|
|
|
[8]
|
Design of Carbon Nano-tubes (CNTs) for Crack Prevention in Concrete of RCC Beam-Column Connections Subjected to Cyclic Loading
|
|
… Symposium on Lightweight and Sustainable Polymeric …,
2023 |
|
|
|
|
[9]
|
Caligula japonica kafa yapısından kitin film üretimi, karakterizasyonu ve sitotoksisitesinin değerlendirilmesi
|
|
2022 |
|
|
|
|
[10]
|
Kumaş sarim metodu i̇le üreti̇len arami̇d fi̇ber borularin darbe di̇rençleri̇ni̇n araştirilmasi
|
|
2022 |
|
|
|
|
[11]
|
A comprehensive study of ceramic matrix composites for space applications
|
|
Advances in Materials …,
2022 |
|
|
|
|
[12]
|
Research Article A Comprehensive Study of Ceramic Matrix Composites for Space Applications
|
|
2022 |
|
|
|
|
[13]
|
Influence of Graphene Type and Content on Friction and Wear of Silicon Carbide/Graphene Nanocomposites in Aqueous Environment
|
|
Materials,
2022 |
|
|
|
|
[14]
|
Polymer-based nanocomposites reinforced with functionalized-MWCNT and their utilizing as sorbent for removal of MB and Cd2+ ion from water media: A review
|
|
Journal of Organometallic …,
2022 |
|
|
|
|
[15]
|
A Comprehensive Study of Ceramic Matrix Composites for Space Applications.
|
|
Advances in …,
2022 |
|
|
|
|
[16]
|
Synergistic action of mechanisms for increasing the impact toughness of ceramic composites based on ZrO2
|
|
AIP Conference …,
2022 |
|
|
|
|
[17]
|
A study on the use of indigenous New Zealand plant fibres for producing biomorphic hydroxyapatite fibres and chars used in reinforcing biomedical hydroxyapatite …
|
|
2022 |
|
|
|
|
[18]
|
CNTS REINFORCED METALLIC MATRIX COMPOSITE: A REVIEW ON CNTS PERCENTAGE, TYPES, MATRIXES, AND PRODUCTION METHODS
|
|
ACADEMIC JOURNAL …,
2022 |
|
|
|
|
[19]
|
Mechanical Properties of Nanocrystalline Copper/CNT Nanocomposites
|
|
Recent Advances in Computational and Experimental …,
2022 |
|
|
|
|
[20]
|
Kumaş sarım metodu ile üretilen aramid fiber boruların darbe dirençlerinin araştırılması
|
|
2022 |
|
|
|
|
[21]
|
Self-healing Ceramic Matrix Composites A Monograph
|
|
2021 |
|
|
|
|
[22]
|
Процес наномодифікації кераміки та прогнозування фізико-механічних властивостей нанокерамічних матеріалів
|
|
2021 |
|
|
|
|
[23]
|
Synthesis and Applications of Polymer Nanocomposite Matrices: A Perspective
|
|
Handbook of Polymer and Ceramic …,
2021 |
|
|
|
|
[24]
|
Multi-phase field modeling for various fracture mechanisms in composites
|
|
2021 |
|
|
|
|
[25]
|
Technical Review: Improvement of Mechanical properties and suitability towards Armor Applications–Alumina Composites
|
|
2021 |
|
|
|
|
[26]
|
3D Nanomaterials and Their Optoelectronic Applications
|
|
Nanomaterials for Optoelectronic Applications,
2021 |
|
|
|
|
[27]
|
Effect of sintering temperature on the physiochemical properties, microstructure, and compressive strength of a bioceramic root canal sealer reinforced with multi …
|
|
2021 |
|
|
|
|
[28]
|
Influence of Cracking on the Durability of Reinforced Concrete with Carbon Nanotubes
|
|
2021 |
|
|
|
|
[29]
|
Rostrocaudal distribution of the C-Fos-immunopositive spinal network defined by muscle activity during locomotion
|
|
Brain Sciences,
2021 |
|
|
|
|
[30]
|
Three-dimensional graphene-carbon nanotube reinforced ceramics and computer simulation
|
|
Ceramics International,
2021 |
|
|
|
|
[31]
|
A Mass Approach towards Carbon Nanotubes in the Field of Nanotechnology
|
|
2020 |
|
|
|
|
[32]
|
Комбинационное рассеяние света и механизмы электропроводности в гибридных пленках из углеродных и неорганических нанотрубок
|
|
2020 |
|
|
|
|
[33]
|
Modelling and optimisation of natural fibre reinforced polymer nanocomposite: application of mixture-design technique
|
|
2020 |
|
|
|
|
[34]
|
Performance Testing of Ceramic-Metal Composites: A Review
|
|
2020 |
|
|
|
|
[35]
|
Трансформация структуры композитов МУНТ-Si в процессе термической обработки.
|
|
… состава и структуры …,
2020 |
|
|
|
|
[36]
|
Influence of Zinc Oxide Nanoparticles on the Optical, Dielectric and Electromagnetic Interference Shielding Performance of Polystyrene Films
|
|
2020 |
|
|
|
|
[37]
|
A Review on
|
|
2020 |
|
|
|
|
[38]
|
A review of non-soil biochar applications
|
|
2020 |
|
|
|
|
[39]
|
Influence of Graphene and Graphene Oxide on Properties of Spark Plasma Sintered Si3N4 Ceramic Matrix
|
|
2020 |
|
|
|
|
[40]
|
An investigation on the development and wear performance of chromium-MWCNTs transformed HVOF sprayed nano-WC-CoCr coatings
|
|
2020 |
|
|
|
|
[41]
|
Graphene-Based Thermoelectrics
|
|
2020 |
|
|
|
|
[42]
|
A comparative review of Mg/CNTs and Al/CNTs composite to explore the prospect of bimetallic Mg-Al/CNTs composites
|
|
2020 |
|
|
|
|
[43]
|
Temporomandibular Disorders and BIO-IPNs: in vitro approach to find molecular solution to biological problem.
|
|
2020 |
|
|
|
|
[44]
|
Intellectual Property Issues in Nanotechnology
|
|
2020 |
|
|
|
|
[45]
|
A Review on Nanocomposites. Part 1: Mechanical Properties
|
|
2020 |
|
|
|
|
[46]
|
Synthesis and material properties of polymer-derived niobium carbide and niobium nitride nanocrystalline ceramics
|
|
2020 |
|
|
|
|
[47]
|
Ceramic Composite Based on Zirconia Reinforced by Single-Walled Carbon Nanotubes
|
|
2019 |
|
|
|
|
[48]
|
Reinforcement effect of textured GnPs on advanced ceramics densified by SPS
|
|
2019 |
|
|
|
|
[49]
|
Керамический композит на основе диоксида циркония, армированный одностенными углеродными нанотрубками
|
|
2019 |
|
|
|
|
[50]
|
Reinforcement of alumina with carbon nano cones and characterization
|
|
2019 |
|
|
|
|
[51]
|
Carbon-based polymer nanocomposites with enhanced conductive properties
|
|
2019 |
|
|
|
|
[52]
|
Thermal Behavior of Spark Plasma Sintered Alumina-Based Nanocomposites
|
|
2019 |
|
|
|
|
[53]
|
Effect of IrO2 crystallinity on electrocatalytic behavior of IrO2–Ta2O5/MWCNT composite as anodes in chlor-alkali membrane cell
|
|
2019 |
|
|
|
|
[54]
|
LOW-DIMENSIONAL MATERIALS WITH PROTECTIVE COATINGS FOR APPLICATIONS UNDER EXTREME CONDITIONS
|
|
2019 |
|
|
|
|
[55]
|
Effect of graphene nano-platelet addition on the microstructure and spark plasma sintering kinetics of zirconium diboride
|
|
2019 |
|
|
|
|
[56]
|
Thermal Behavior of Spark Plasma Sintered Alumina-Based Nanocomposites.
|
|
2019 |
|
|
|
|
[57]
|
کاربرد مواد دریایی در ساخت داربست و ترمیم بافت
|
|
فصلنامه علوم و فناوری دریا,
2019 |
|
|
|
|
[58]
|
Application of marine materials in the construction of scaffolding and tissue repair
|
|
Iranian Journal of Marine …,
2019 |
|
|
|
|
[59]
|
ОСОБЕННОСТИ СИНТЕЗА КОМПОЗИЦИОННОГО МАТЕРИАЛА НА ОСНОВЕ ДИОКСИДА КРЕМНИЯ И УГЛЕРОДНЫХ НАНОТРУБОК
|
|
Сибирский аэрокосмический журнал,
2018 |
|
|
|
|
[60]
|
Computational Modeling of Growth and Mechanical Behavior of Carbon-based Nanomaterials
|
|
2018 |
|
|
|
|
[61]
|
FEATURES OF SYNTHESIS OF COMPOSITE MATERIAL BASED ON SILICON DIOXIDE AND CARBON NANOTUBES
|
|
Siberian Journal of Science and Technology,
2018 |
|
|
|
|
[62]
|
Nanomaterials: Classification and Properties-Part I
|
|
2018 |
|
|
|
|
[63]
|
Influence of SiC fiber on thermal cycling lifetime of SiC fibers/YSZ thermal barrier coatings by atmospheric plasma spraying
|
|
Ceramics International,
2018 |
|
|
|
|
[64]
|
A simple and efficient route to synthesize hafnium carbide nanowires by catalytic pyrolysis of a polymer precursor
|
|
Ceramics International,
2018 |
|
|
|
|
[65]
|
A Review on the Use of Hydroxyapatite-Carbonaceous Structure Composites in Bone Replacement Materials for Strengthening Purposes
|
|
Materials,
2018 |
|
|
|
|
[66]
|
Nanocomposite Containing Cross‐linked Poly(Methyl‐Methacrylate)/Multiwall Carbon Nanotube as a Selective Y3+ Sensor Probe
|
|
Polymer composites,
2018 |
|
|
|
|
[67]
|
On the Performance of Carbon Nanotubes on Sintered Alumina-Zirconia Ceramics
|
|
Sintering Technology-Method and Application,
2018 |
|
|
|
|
[68]
|
Boron Nitride Nanotubes (BNNTs) Reinforced-polymer Derived Ceramic (PDC) Nanocomposites for Structural and Thermal Applications
|
|
2018 |
|
|
|
|
[69]
|
Glass composites reinforced with silicon-doped carbon nanotubes
|
|
Carbon,
2018 |
|
|
|
|
[70]
|
Synthesis and characterisation of multi-walled carbon nanotubes (MWCNTs)
|
|
International Journal of Ambient Energy,
2018 |
|
|
|
|
[71]
|
A bridging cell multiscale modeling of carbon nanotube-reinforced aluminum nanocomposites
|
|
Composite Structures,
2018 |
|
|
|
|
[72]
|
Получение композита Al2O3/МУНТ из наноразмерных порошков Al2O3 и его механические свойства
|
|
2017 |
|
|
|
|
[73]
|
Multi-functionality of carbon nanotubes reinforced 3 mol% yttria stabilized zirconia structural biocomposites
|
|
Materials Science and Engineering: A,
2017 |
|
|
|
|
[74]
|
Effects of Temperature on Thermodynamic parameters and Carbon Nanotubes Growth Rate on Aluminum Electrode in Electrochemical deposition Process
|
|
2017 |
|
|
|
|
[75]
|
Fabrication and toughening behavior of carbon nanotube (CNT) scaffold reinforced SiBCN ceramic composites with high CNT loading
|
|
Ceramics International,
2017 |
|
|
|
|
[76]
|
Fabrication and mechanical properties of SiC composites toughened by buckypaper and carbon fiber fabrics alternately laminated
|
|
Ceramics International,
2017 |
|
|
|
|
[77]
|
Reinforcing mechanism of graphene at atomic level: Friction, crack surface adhesion and 2D geometry
|
|
Carbon,
2017 |
|
|
|
|
[78]
|
Grain size effect in conductive phosphate/carbon nanotube ceramics
|
|
Ceramics International,
2017 |
|
|
|
|
[79]
|
The Life Cycle of Engineered Nanoparticles
|
|
Modelling the Toxicity of Nanoparticles,
2017 |
|
|
|
|
[80]
|
Desempenho Materiais Cerâmicos Refratários com adição de Sílica Residual da Casca de Arroz e NTC
|
|
2017 |
|
|
|
|
[81]
|
Preparation of SiC–MgAl2O4–Y3Al5O12-MWCNTs nanocomposites by spark plasma sintering
|
|
IOP Conference Series: Materials Science and Engineering,
2017 |
|
|
|
|
[82]
|
Thermal resistant, mechanical and electrical properties of a novel ultrahigh-content randomly-oriented CNTs reinforced SiC matrix composite-sheet
|
|
Composites Part B: Engineering,
2017 |
|
|
|
|
[83]
|
Carbon Nanotubes Reinforced Aluminum Matrix Composites-A Review of Processing Techniques
|
|
2017 |
|
|
|
|
[84]
|
Preparation of Al2O3
|
|
Chemistry for …,
2017 |
|
|
|
|
[85]
|
Non-linear electrical conductivity of carbon nanotubes/WS2 nanotubes (nanoparticles) hybrid films
|
|
2017 |
|
|
|
|
[86]
|
Chemical modification of single-walled carbon nanotubes via alkali metal reduction
|
|
2016 |
|
|
|
|
[87]
|
Processing and Thermal Behavior of Alumina Hybrid Nanocomposites
|
|
2016 |
|
|
|
|
[88]
|
Electrical and Thermal Behavior of Alumina-Based Nanocomposites
|
|
2016 |
|
|
|
|
[89]
|
ASCIENTIAE RERUM
|
|
2016 |
|
|
|
|
[90]
|
Влияние дисперсий многослойных углеродных нанотрубок на физико-механические характеристики и структуру строительной керамики
|
|
2016 |
|
|
|
|
[91]
|
SWCNTs versus MWCNTs as Reinforcement Agents in Zirconia-and Alumina-based Nanocomposites: Which One to Use
|
|
2016 |
|
|
|
|
[92]
|
REINFORCING EFFECT OF GRAPHENE OXIDE ON CEMENT MORTAR UNDER HIGH STRAIN RATE LOADINGS
|
|
2016 |
|
|
|
|
[93]
|
Building stonewares modifications by dispersions of multi-walled carbon nanotubes
|
|
2016 |
|
|
|
|
[94]
|
Chitin and Chitosan: Structure, Properties and Applications in Biomedical Engineering
|
|
Journal of Polymers and the Environment,
2016 |
|
|
|
|
[95]
|
Preparation and properties of a composite SiC with addition of multi-walled carbon nanotubes synthesized in the plasma jet
|
|
Journal of Physics: Conference Series,
2016 |
|
|
|
|
[96]
|
МОДИФИКАЦИЯ СТРОИТЕЛЬНОЙ КЕРАМИКИ СУСПЕНЗИЯМИ, СОДЕРЖАЩИМИ УГЛЕРОДНЫЕ НАНОТРУБКИ
|
|
2016 |
|
|
|
|
[97]
|
A study of processing and slurry erosion behaviour of multi-walled carbon nanotubes modified HVOF sprayed nano-WC-10Co-4Cr coating
|
|
Surface and Coatings Technology,
2016 |
|
|
|
|
[98]
|
Fabrication of Carbon Nanotube Reinforced Al2O3/Cr2O3 Nanocomposites by Coprecipitation Process
|
|
Al-Khwarizmi Engineering Journal,
2016 |
|
|
|
|
[99]
|
POWER GENERATION FROM UNTAPPED SOURCES IN DAY TO DAY LIFE
|
|
International Journal of Research in Advanced Technology -IJORAT,
2016 |
|
|
|
|
[100]
|
МОДИФИКАЦИЯ СТРОИТЕЛЬНОЙ КЕРАМИКИ ДИСПЕРСИЯМИ МНОГОСЛОЙНЫХ УГЛЕРОДНЫХ НАНОТРУБОК
|
|
2016 |
|
|
|
|
[101]
|
Ударопрочные материалы на основе технической керамики: достижения и перспективы повышения их баллистической эффективности
|
|
2016 |
|
|
|
|
[102]
|
Nanocomposites
|
|
Characterization of Carbon Nanotube Based Composites under Consideration of Defects,
2016 |
|
|
|
|
[103]
|
In-situ synthesis silicon nitride nanowires in carbon fiber felts and their effect on the mechanical properties of carbon/carbon composites
|
|
Materials & Design,
2016 |
|
|
|
|
[104]
|
Role of Microstructural Features in Toughness Improvement of Zirconia Toughened Alumina
|
|
Journal of Minerals and Materials Characterization and Engineering,
2016 |
|
|
|
|
[105]
|
Characterisation and Properties Improvement of Armour Ceramics
|
|
2016 |
|
|
|
|
[106]
|
Fabrication of Al2O3–Ni–CNTs nanocomposites by co-precipitation of CNTs and Ni nanoparticle on Al2O3 powder and spark plasma sintering
|
|
Journal of the Ceramic Society of Japan,
2016 |
|
|
|
|
[107]
|
Utilization of Nanofibers in Sintered Ceramic Body Based on Calcium Aluminous Cement
|
|
Materials Science Forum,
2016 |
|
|
|
|
[108]
|
Shock-Resistant Materials Based on Commercial Grade Ceramic: Achievements and Prospects for Improving Their Ballistic Efficiency
|
|
Refractories and Industrial Ceramics,
2016 |
|
|
|
|
[109]
|
Production of graphene based materials and their potential applications
|
|
2015 |
|
|
|
|
[110]
|
Characterization of yttria stabilized zirconia and carbon nanotube doped: YSZ ceramic composites fabricated by spark plasma sintering
|
|
2015 |
|
|
|
|
[111]
|
MODELING THE HYGRO-THERMO-MECHANICAL AGGLOMERATION RELATIONS OF CARBON-EPOXY HYBRID NANOCOMPOSITES
|
|
International Journal for Multiscale Computational Engineering,
2015 |
|
|
|
|
[112]
|
Applications of Carbon Nanotubs and Other Nanomagnetic Nanowires
|
|
Progress In Electromagnetics Research Symposium Proceedings,
2015 |
|
|
|
|
[113]
|
Nanomaterials Release from Nano-Enabled Products
|
|
Indoor and Outdoor Nanoparticles,
2015 |
|
|
|
|
[114]
|
An exact analysis for the hoop elasticity and pressure-induced twist of CNT-nanovessels and CNT-nanopipes
|
|
Mechanics of Materials,
2015 |
|
|
|
|
[115]
|
Fabrication and tensile behaviors of mini C/SiC composites Reinforced by Si3N4 Nanowires
|
|
Materials Science and Engineering: A,
2015 |
|
|
|
|
[116]
|
In-vitro bioactivity of nanocrystalline and bulk larnite/chitosan composites: comparative study
|
|
Journal of Sol-Gel Science and Technology,
2015 |
|
|
|
|
[117]
|
Alumina Matrix Composites with Non-Oxide Nanoparticle Addition and Enhanced Functionalities
|
|
Nanomaterials,
2015 |
|
|
|
|
[118]
|
Role of Defect Density in Optimizing MWCNT-Polymer Composite Sensor Performance: Tuning of Its Acceptable Limit by Acid Treatment Condition
|
|
Science of Advanced Materials,
2015 |
|
|
|
|
[119]
|
Hygro-Thermo-Electric Properties of CNT Epoxy Nanocomposites With Agglomeration Effects
|
|
Mechanics of Advanced Materials and Structures,
2015 |
|
|
|
|
[120]
|
Effect of Incorporation Techniques of Nanomaterials on Strength of Cement-based Materials
|
|
The 2nd International Conference of Buildings, Construction and Environmental Engineering (BCEE2-2015),
2015 |
|
|
|
|
[121]
|
CHARACTERIZATION of HIGH STRAIN RATE BEHAVIOR of TAC/CNTs/SIC CMCs PREPARED by SPARK PLASMA SINTERING
|
|
2015 |
|
|
|
|
[122]
|
Effect of Incorporation Techniques of Nanomaterials on Strength of Cement-based Materials‖
|
|
The 2nd International Conference of Buildings, Construction and Environmental Engineering,
2015 |
|
|
|
|
[123]
|
SYNTHESIS AND CHARACTERIZATION OF SEMI COKE BASED CARBON NANO COMPOSITES WITH CARBON AND COPPER
|
|
Acta Ciencia Indica,
2015 |
|
|
|
|
[124]
|
Titaankarbiidi ja süsiniknanotorude komposiidi sünteesimeetodi väljatöötamine kasutades sool-geel tehnoloogiat
|
|
2014 |
|
|
|
|
[125]
|
Dispersion оf multi-walled carbon nanotubes in building science оf materials
|
|
Science & …,
2014 |
|
|
|
|
[126]
|
A Novel Approach for the Processing of Advanced Polymer Derived Ceramics with Carbon Nanotubes with the Help of Pores.
|
|
Advanced …,
2014 |
|
|
|
|
[127]
|
Fracture behaviour of α-Al2O3 ceramics reinforced with a mixture of single-wall and multi-wall carbon nanotubes
|
|
Composites Part B: Engineering,
2014 |
|
|
|
|
[128]
|
МОДЕЛИРОВАНИЕ НЕСТАЦИОНАРНЫХ ПРОЦЕССОВ КАТАЛИТИЧЕСКОГО СИНТЕЗА УГЛЕРОДНЫХ НАНОТРУБОК В ПСЕВДООЖИЖЕННОМ СЛОЕ
|
|
2014 |
|
|
|
|
[129]
|
МОДЕЛИРОВАНИЕ СВОЙСТВ КЕРАМИЧЕСКОГО КОМПОЗИТА С ПОМОЩЬЮ ПЕРЦЕПТРОННЫХ КОМПЛЕКСОВ
|
|
2014 |
|
|
|
|
[130]
|
Role Of Carbon Nanotubes Reinforcement And Processing Parameters On Mechanical Properties Of Alumina Based Nanocomposites
|
|
2014 |
|
|
|
|
[131]
|
Tailoring Carbon Fiber/Carbon Nanotubes Interface to Optimize Mechanical Properties of Cf‐CNTs/SiC Composites
|
|
International Journal of Applied Ceramic Technology,
2014 |
|
|
|
|
[132]
|
MWCNT-conducting polymer composite based ammonia gas sensors: A new approach for complete recovery process
|
|
Sensors and Actuators B: Chemical,
2014 |
|
|
|
|
[133]
|
Investigation of thermal stability studies of MWCNT-conducting polymer based composites for heat sensing application
|
|
interaction,
2014 |
|
|
|
|
[134]
|
Investigations on the surface characteristics of grinding and edm processes using carbon nanotubes
|
|
NULL
2014 |
|
|
|
|
[135]
|
Simulation of transient processes of the catalytic synthesis of carbon nanotubes in a fluidized bed
|
|
Theoretical Foundations of Chemical Engineering,
2014 |
|
|
|
|
[136]
|
Effect of sintering temperature and nanotube concentration on microstructure and properties of carbon nanotube/alumina nanocomposites
|
|
Ceramics International,
2014 |
|
|
|
|
[137]
|
In-situ synthesis and growth mechanism of silicon nitride nanowires on carbon fiber fabrics
|
|
Ceramics International,
2014 |
|
|
|
|
[138]
|
Improving the mechanical and thermal properties of semi-coke based carbon/copper composites reinforced using carbon nanotubes
|
|
S Kumari, A Kumar, PR Sengupta, PK Dutta, RB Mathur - amlett.com,
2014 |
|
|
|
|
[139]
|
Phase transformation-dependent sensing performance of multi-walled carbon nanotube–alumina nanocomposite-based gas sensors
|
|
Materials Science in Semiconductor Processing,
2014 |
|
|
|
|
[140]
|
MWCNT/Alumina Nanocomposite Characterization and Toughening Mechanism of Uniform Dispersion
|
|
Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry,
2014 |
|
|
|
|
[141]
|
Dielectric Properties of Elastomeric Modified Epoxies
|
|
Micro and Nanostructured Epoxy/Rubber Blends,
2014 |
|
|
|
|
[142]
|
A Novel Approach for the Processing of Advanced Polymer Derived Ceramics with Carbon Nanotubes with the Help of Pores
|
|
Advanced Engineering Materials,
2014 |
|
|
|
|
[143]
|
Novel Functionalized Polymers in Drug Delivery: A Brief Review
|
|
Journal of Current Pharma Research,
2014 |
|
|
|
|
[144]
|
Vyu?ití nanovláken ve st?epu tradi?ní keramiky
|
|
2014 |
|
|
|
|
[145]
|
In Situ Formation of Nanoparticle Titanium Carbide/Nitride Shaped Ceramics from Meltable Precursor Composition
|
|
The Journal of Physical Chemistry C,
2014 |
|
|
|
|
[146]
|
Tailoring carbon nanotube/matrix interface to optimize mechanical properties of multiscale composites
|
|
Carbon,
2014 |
|
|
|
|
[147]
|
DISPERSION OF MULTI-WALLED CARBON NANOTUBES IN BUILDING SCIENCE OF MATERIALS.
|
|
Science & Technique,
2014 |
|
|
|
|
[148]
|
ДИСПЕРСИИ МНОГОСЛОЙНЫХ УГЛЕРОДНЫХ НАНОТРУБОК В СТРОИТЕЛЬНОМ МАТЕРИАЛОВЕДЕНИИ
|
|
NULL
2014 |
|
|
|
|
[149]
|
VYUŽITÍ NANOVLÁKEN VE STŘEPU TRADIČNÍ KERAMIKY
|
|
2014 |
|
|
|
|
[150]
|
Simulations of Carbon Nano-Structures for High-Strength Composites, Thermal Transport, and Hydrogen Storage
|
|
2014 |
|
|
|
|
[151]
|
Multi-Walled Carbon Nanotube/Alumina Composite: Synthesis, Characterization and Its Promising Application for Ammonia Detection
|
|
Energy and Environment Focus,
2013 |
|
|
|
|
[152]
|
Development of MWCNTs/alumina composite-based sensor for trace level ammonia gas sensing
|
|
Applied Physics A,
2013 |
|
|
|
|
[153]
|
Mechanics and morphology of single-walled carbon nanotubes: from graphene to the elastica
|
|
Philosophical Magazine,
2013 |
|
|
|
|
[154]
|
Nanocomposites nanotubes de carbone-céramique à microstructure contrôlée: préparation et propriétés
|
|
2013 |
|
|
|
|
[155]
|
In‐Situ Growth of Carbon Nanotubes in Three Dimensional Needle‐Punched Carbon Fabrics and Hybrid Enhancement to C/SiC Composites
|
|
Nanostructured Materials and Nanotechnology,
2013 |
|
|
|
|
[156]
|
Tribological properties and applications of alumina
|
|
NULL
2013 |
|
|
|
|
[157]
|
A methodology for constitutive relationships estimation for SWNT reinforced composites
|
|
Engineering Computations,
2013 |
|
|
|
|
[158]
|
Analysis of Aluminium Nano Composites using Anova in CNC Machining Process
|
|
NULL
2013 |
|
|
|
|
[159]
|
Properties and Applications of Aligned Carbon Nanotube Arrays
|
|
Aligned Carbon Nanotubes,
2013 |
|
|
|
|
[160]
|
An enhanced continuum modeling of the ideal strength and the angle of twist in tensile behavior of single-walled carbon nanotubes
|
|
Journal of Applied Physics,
2013 |
|
|
|
|
[161]
|
骨组织工程支架材料应用于大段骨缺损的实验研究进展
|
|
创伤外科杂志,
2013 |
|
|
|
|
[162]
|
Carbon nanotubes in new materials
|
|
Russian Chemical Reviews,
2013 |
|
|
|
|
[163]
|
Nanostructured Materials and Nanotechnology VI Edited by Sanjay Mathur and Suprakas Sinha Ray Copyright© 2013 The American Ceramic Society
|
|
2013 |
|
|
|
|
[164]
|
Наномодифицирование керамических материалов строительного назначения
|
|
2013 |
|
|
|
|
[165]
|
Перспективы наномодифицирования керамических материалов строительного назначения
|
|
2013 |
|
|
|
|
[166]
|
Керамои стеклокерамоматричные нанокомпозиты, армированные углеродными нанотрубками
|
|
2013 |
|
|
|
|
[167]
|
Laser micromachining, sintering, and laser-induced plasma deburring
|
|
ProQuest Dissertations Publishing,
2013 |
|
|
|
|
[168]
|
Zrc-sic Kompozitlerinin Spark Plazma Sinterleme (sps) Yöntemi İle Üretimi Ve Karakterizayonu
|
|
2013 |
|
|
|
|
[169]
|
Perspectives of nano-modification of ceramic materials for building purposes
|
|
2013 |
|
|
|
|
[170]
|
Углеродные нанотрубки в новых материалах
|
|
2013 |
|
|
|
|
[171]
|
CARBON NANOTUBE REINFORCED ALUMINIUM ALLOY COMPOSITES-A REVIEW
|
|
Journal of …,
2013 |
|
|
|
|
[172]
|
Zrc-tic Kompozitinin Spark Plazma Sinterleme (sps) Yöntemi İle Üretimi Ve Karakterizasyonu
|
|
2013 |
|
|
|
|
[173]
|
THµSE
|
|
2013 |
|
|
|
|
[174]
|
Carbon nanotubes (CNTs) and mechanical properties of Al2O3 and zirconia toughened alumina (ZTA) composites reinforced by them: a review
|
|
2012 |
|
|
|
|
[175]
|
Examples for Nanotechnological Applications in the Energy Sector
|
|
2012 |
|
|
|
|
[176]
|
ИОНООБМЕННАЯ СОРБЦИЯ ЦИРКОНИЯ ФУНКЦИАЛИЗОВАННЫМИ УГЛЕРОДНЫМИ НАНОВОЛОКНАМИ
|
|
2012 |
|
|
|
|
[177]
|
Al2o3–Zro2–Ceo2 Kompozitlerinin Spark Plazma Sinterleme (sps) yöntemi İle Üretimi Ve Karakterizasyonu
|
|
2012 |
|
|
|
|
[178]
|
Selectively depositing Pt nanoparticles on pre-treated electrically conductive porous alumina and its electrochemical studies
|
|
Ceramics International,
2012 |
|
|
|
|
[179]
|
Ion-exchange zirconium sorption by functionalized carbon nanofibers
|
|
Inorganic Materials,
2012 |
|
|
|
|
[180]
|
Microstructure and physicomechanical properties of pressureless sintered multiwalled carbon nanotube/alumina nanocomposites
|
|
Ceramics International,
2012 |
|
|
|
|
[181]
|
Laponite assisted dispersion of carbon nanotubes in water
|
|
Journal of colloid and interface science,
2012 |
|
|
|
|
[182]
|
Temperature and load dependent mechanical properties of pressureless sintered carbon nanotube/alumina nanocomposites
|
|
Materials Science and Engineering: A,
2012 |
|
|
|
|
[183]
|
Thermomechanical behavior of bulk Ni/MWNT composites produced via powder metallurgy
|
|
Advanced Engineering Materials,
2012 |
|
|
|
|
[184]
|
Ionoobmennaya sorbtsiya tsirkoniya funktsializovannymi uglerodnymi nanovoloknami
|
|
Neorganicheskie materialy,
2012 |
|
|
|
|
[185]
|
Analysis of Cnt/Fe415 Steel Nan composites Using Taguchi Analysis in Cnc Lathe Process
|
|
J Singh, K Maheshwari, K Ankit - SRM University,
2012 |
|
|
|
|
[186]
|
Molecular Simulations on Interfacial Sliding of Carbon Nanotube Reinforced Alumina Composites
|
|
NULL
2012 |
|
|
|
|
[187]
|
Research Progress in SiC-Based Ceramic Matrix Composites
|
|
Journal of the Korean Ceramic Society,
2012 |
|
|
|
|
[188]
|
Properties of carbon nano-tubes–Cf/SiC composite by precursor infiltration and pyrolysis process
|
|
Materials & Design,
2011 |
|
|
|
|
[189]
|
Thermal Sprayed CNT Reinforced Nanocomposite Coatings–A Review
|
|
Journal of Minerals and Materials Characterization and Engineering,
2011 |
|
|
|
|
[190]
|
Fabrication and Characterization of Alumina/CNTs Nanocomposite Powders, by CCVD Method and Investigation of the Parameter Involved
|
|
Journal of Chemistry and Chemical Engineering,
2011 |
|
|
|
|
[191]
|
Processing and properties of alumina–carbon nano fibre ceramic composites using standard ceramic technology
|
|
Ceramics International,
2011 |
|
|
|
|
[192]
|
Thermally Conductive Ceramic Matrix Composites
|
|
Advanced Materials for Thermal Management of Electronic Packaging. Springer New York,
2011 |
|
|
|
|
[193]
|
Laser sintering of carbon nanotube-reinforced ceramic nanocomposites
|
|
International Journal of Smart and Nano Materials,
2011 |
|
|
|
|
[194]
|
A novel zeolite-multiwalled carbon nanotube composite for the electroanalysis of copper (II) ion
|
|
Journal of Applied Electrochemistry,
2011 |
|
|
|
|
[195]
|
Interaction behavior of a silicon dioxide nanotube interface
|
|
Journal of Computational and Theoretical Nanoscience,
2011 |
|
|
|
|
[196]
|
A comparison of the effects of multi-wall and single-wall carbon nanotube additions on the properties of zirconia toughened alumina composites
|
|
Carbon,
2011 |
|
|
|
|
[197]
|
Non-isothermal oxidation kinetics of single-and multi-walled carbon nanotubes up to 1273 K in ambient
|
|
Journal of thermal analysis and calorimetry,
2011 |
|
|
|
|
[198]
|
Макроматериалы из углеродных нанотрубок и с углеродными нанотрубками
|
|
2011 |
|
|
|
|
[199]
|
Nanostructured hydroxyapatite, chitosan and carbon nanotube based composite biomaterials for bone tissue engineering
|
|
2011 |
|
|
|
|
[200]
|
Nanostructured Materials and Nanotechnology IV Edited by Sanjay Mathur and Suprakas Sinha Ray Copyright© 2010 The American Ceramic Society
|
|
Nanostructured Materials and …,
2010 |
|
|
|
|
[201]
|
Investigation into gas flaring reduction in the oil and gas industry
|
|
2010 |
|
|
|
|
[202]
|
Chitosan composites for bone tissue engineering—An overview
|
|
Marine drugs,
2010 |
|
|
|
|
[203]
|
Characterization of exposures to nanoscale particles and fibers during solid core drilling of hybrid carbon nanotube advanced composites
|
|
International journal of occupational and environmental health,
2010 |
|
|
|
|
[204]
|
High-aspect-ratio, free-form patterning of carbon nanotube forests using micro-electro-discharge machining
|
|
Diamond and Related Materials,
2010 |
|
|
|
|
[205]
|
Sinter and hot isostatic pressing (HIP) of multi-wall carbon nanotubes (MWCNTs) reinforced ZTA nanocomposite: microstructure and fracture toughness
|
|
International Journal of Refractory Metals and Hard Materials,
2010 |
|
|
|
|
[206]
|
Effect of Carbon Nanotube on Gun Metal
|
|
HA Gafoor, S Murugesh - SRM University,
2010 |
|
|
|
|
[207]
|
Effect of Multi-Walled Carbon Nanotubes on Viability and Superoxide Dismutase Expression in Human Wound Pathogens
|
|
International Journal of Nanoscience,
2009 |
|
|
|
|
[208]
|
Сибирский аэрокосмический журнал ISSN 2712-8970 (Print) ISSN 2782-5760 (on-line)
|
|
|
|
|
|
|
[209]
|
Studijní program N3607 Stavební inženýrství
|
|
|
|
|
|
|
[210]
|
TEMPOROMANDIBULAR DISORDERS AND BIO-IPNS: IN VITRO APPROACH TO FIND MOLECULAR SOLUTION TO BIOLOGICAL PROBLEM
|
|
|
|
|
|