Flexural Properties of Long Bamboo Fiber/ PLA Composites

Journals Menu

Follow SCIRP

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Open Journal of Composite Materials

ISSN Print: 2164-5612
ISSN Online: 2164-5655
www.scirp.org/journal/ojcm
E-mail: ojcm@scirp.org

Google-based Impact Factor: 1.56
Citations

Journals Menu

"Flexural Properties of Long Bamboo Fiber/ PLA Composites"
written by Shinji Ochi,
published by Open Journal of Composite Materials, Vol.5 No.3, 2015

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Fabrication and evaluation of PLA/MgAl2O4 scaffolds manufactured through 3D printing method
	Journal of the Mechanical Behavior of …, 2023

[2]	Effect of compression molding temperature on the characterization of asbestos-free composite friction materials for railway applications.
	AIMS Materials …, 2023

[3]	A review on fused deposition modeling materials with analysis of key process parameters influence on mechanical properties
	… International Journal of …, 2023

[4]	Polylactic acid composite materials for packaging and the consumption of food products
	Salcedo, C Caicedo… - Polylactic Acid …, 2023

[5]	FEA-Based Prediction of Tensile and Flexural Properties of Green Composites Under Different Fiber Loading
	Advances in Simulation, Product …, 2023

[6]	Role of Different Forms of Bamboo and Chemical Treatment on the Mechanical Properties of Compression Molded Green Composites
	Bio-Fiber Reinforced Composite Materials, 2022

[7]	Investigation on Composite Sandwich PLA printed parts and Control Parameter optimization
	2022

[8]	Research Article Thermal Conductivity and Mechanical Characterization of Bamboo Fiber and Rice Husk/MWCNT Filler Epoxy Hybrid Composite
	2022

[9]	Mechanical performance evaluation of bamboo fibre reinforced polymer composites and its applications: a review
	Functional …, 2022

[10]	Structural and mechanical properties of bamboo fiber bundle and fiber/bundle reinforced composites: a review
	Journal of Materials …, 2022

[11]	Thermal Conductivity and Mechanical Characterization of Bamboo Fiber and Rice Husk/MWCNT Filler Epoxy Hybrid Composite
	Journal of …, 2022

[12]	A Sustainable and Biodegradable Building Block: Review on Mechanical Properties of Bamboo Fibre Reinforced PLA Polymer Composites and Their …
	Fibers and …, 2022

[13]	Composites in Context to Additive Manufacturing
	Proceedings of the International …, 2022

[14]	Lactic Acid-Sustainable Raw Material for Biodegradable Hot Melt Adhesive
	Open Journal of Organic Polymer Materials, 2022

[15]	Lightweight biodegradable hybrid composite sandwich panel under three‐point bending loads—Experimental and numerical
	Polymer Composites, 2022

[16]	Extrusion-Based 3D Printing Applications of PLA Composites: A Review
	2021

[17]	Environment friendly, renewable and sustainable poly lactic acid (PLA) based natural fiber reinforced composites–A comprehensive review
	2021

[18]	Multitemperature parameter optimization for fused deposition modeling based on response surface methodology
	2021

[19]	3D-printing pen from valorization of pine cone residues as reinforcement in acrylonitrile butadiene styrene (ABS): Microstructure and thermal properties
	2021

[20]	The fused deposition modeling of POFA reinforced composites polymer
	2021

[21]	Simulação numérica de compósitos poliméricos de poli (ácido lático) reforçado com celulose nanofibrilada para aplicações industriais
	2020

[22]	FDM-based 3D printing of polymer and associated composite: A review on mechanical properties, defects and treatments
	2020

[23]	Properties investigation of 3D printed continuous pineapple leaf fiber-reinforced PLA composite
	2020

[24]	State of art on fusion deposition modeling machines process parameter optimization on composite materials
	2020

[25]	Green Polymer Composites Based on Polylactic Acid (PLA) and Fibers
	2019

[26]	Development of an Additive Manufacturing System for the Deposition of Thermoplastics Impregnated with Carbon Fibers
	2019

[27]	FABRICATION AND CHARACTERIZATION OF WOVEN KENAF/BAMBOO MAT FIBER-REINFORCED EPOXY HYBRID COMPOSITES
	2018

[28]	Treatment of bamboo fibres in improving mechanical performance of polymer composites–A review
	AIP Conference Proceedings, 2018

[29]	A review on composite materials and process parameters optimisation for the fused deposition modelling process
	Analytical Letters, 2017

[30]	Fabrication and characterization of dental mirror product using polylactic acid biocomposites
	International Journal of Polymeric Materials, 2017

[31]	Effect of Bamboo Flour Grafted Lactide on the Interfacial Compatibility of Polylactic Acid/Bamboo Flour Composites
	Polymers, 2017

[32]	EFFECT OF FIBER LENGTH ON MECHANICAL PROPERTIES OF PALF REINFORCED BISPHENOL: A COMPOSITE
	INTERNATIONAL JOURNAL OF INNOVATIONS IN ENGINEERING RESEARCH AND TECHNOLOGY [IJIERT], 2016

[1]	A review on fused deposition modeling materials with analysis of key process parameters influence on mechanical properties The International Journal of Advanced Manufacturing Technology, 2024 DOI:10.1007/s00170-023-12823-x

[2]	Additive Manufacturing of Polymer-Based Composite Materials 2024 DOI:10.1016/B978-0-443-15917-6.00002-5

[3]	A review on bamboo fiber reinforced composites and their potential applications Emergent Materials, 2024 DOI:10.1007/s42247-024-00832-9

[4]	A review on bamboo fiber reinforced composites and their potential applications Emergent Materials, 2024 DOI:10.1007/s42247-024-00832-9

[5]	3D-printing pen from valorization of pine cone residues as reinforcement in acrylonitrile butadiene styrene (ABS): Microstructure and thermal properties Journal of Thermoplastic Composite Materials, 2023 DOI:10.1177/08927057211012735

[6]	Advances in Simulation, Product Design and Development Lecture Notes in Mechanical Engineering, 2023 DOI:10.1007/978-981-19-4556-4_18

[7]	3D-printing pen from valorization of pine cone residues as reinforcement in acrylonitrile butadiene styrene (ABS): Microstructure and thermal properties Journal of Thermoplastic Composite Materials, 2023 DOI:10.1177/08927057211012735

[8]	Fabrication and evaluation of PLA/MgAl2O4 scaffolds manufactured through 3D printing method Journal of the Mechanical Behavior of Biomedical Materials, 2023 DOI:10.1016/j.jmbbm.2023.106001

[9]	Fabrication and evaluation of PLA/MgAl2O4 scaffolds manufactured through 3D printing method Journal of the Mechanical Behavior of Biomedical Materials, 2023 DOI:10.1016/j.jmbbm.2023.106001

[10]	Effect of compression molding temperature on the characterization of asbestos-free composite friction materials for railway applications AIMS Materials Science, 2023 DOI:10.3934/matersci.2023059

[11]	Lightweight biodegradable hybrid composite sandwich panel under three‐point bending loads—Experimental and numerical Polymer Composites, 2022 DOI:10.1002/pc.26944

[12]	Structural and mechanical properties of bamboo fiber bundle and fiber/bundle reinforced composites: a review Journal of Materials Research and Technology, 2022 DOI:10.1016/j.jmrt.2022.05.077

[13]	Lightweight biodegradable hybrid composite sandwich panel under three‐point bending loads—Experimental and numerical Polymer Composites, 2022 DOI:10.1002/pc.26944

[14]	A Sustainable and Biodegradable Building Block: Review on Mechanical Properties of Bamboo Fibre Reinforced PLA Polymer Composites and Their Emerging Applications Fibers and Polymers, 2022 DOI:10.1007/s12221-022-4871-z

[15]	Properties investigation of 3D printed continuous pineapple leaf fiber-reinforced PLA composite Journal of Thermoplastic Composite Materials, 2022 DOI:10.1177/0892705720945371

[16]	Thermal Conductivity and Mechanical Characterization of Bamboo Fiber and Rice Husk/MWCNT Filler Epoxy Hybrid Composite Journal of Nanomaterials, 2022 DOI:10.1155/2022/5343461

[17]	Proceedings of the International Conference on Industrial and Manufacturing Systems (CIMS-2020) Lecture Notes on Multidisciplinary Industrial Engineering, 2022 DOI:10.1007/978-3-030-73495-4_34

[18]	Mechanical performance evaluation of bamboo fibre reinforced polymer composites and its applications: a review Functional Composites and Structures, 2022 DOI:10.1088/2631-6331/ac5b1a

[19]	Bio-Fiber Reinforced Composite Materials Composites Science and Technology, 2022 DOI:10.1007/978-981-16-8899-7_6

[20]	Structural and mechanical properties of bamboo fiber bundle and fiber/bundle reinforced composites: a review Journal of Materials Research and Technology, 2022 DOI:10.1016/j.jmrt.2022.05.077

[21]	Thermal Conductivity and Mechanical Characterization of Bamboo Fiber and Rice Husk/MWCNT Filler Epoxy Hybrid Composite Journal of Nanomaterials, 2022 DOI:10.1155/2022/5343461

[22]	Environment friendly, renewable and sustainable poly lactic acid (PLA) based natural fiber reinforced composites – A comprehensive review Journal of Cleaner Production, 2021 DOI:10.1016/j.jclepro.2021.127483

[23]	State of art on fusion deposition modeling machines process parameter optimization on composite materials Materials Today: Proceedings, 2021 DOI:10.1016/j.matpr.2020.02.865

[24]	Extrusion-Based 3D Printing Applications of PLA Composites: A Review Coatings, 2021 DOI:10.3390/coatings11040390

[25]	Design for Sustainability 2021 DOI:10.1016/B978-0-12-819482-9.00003-4

[26]	3D-printing pen from valorization of pine cone residues as reinforcement in acrylonitrile butadiene styrene (ABS): Microstructure and thermal properties Journal of Thermoplastic Composite Materials, 2021 DOI:10.1177/08927057211012735

[27]	Multitemperature parameter optimization for fused deposition modeling based on response surface methodology AIP Advances, 2021 DOI:10.1063/5.0049357

[28]	Extrusion-Based 3D Printing Applications of PLA Composites: A Review Coatings, 2021 DOI:10.3390/coatings11040390

[29]	Environment friendly, renewable and sustainable poly lactic acid (PLA) based natural fiber reinforced composites – A comprehensive review Journal of Cleaner Production, 2021 DOI:10.1016/j.jclepro.2021.127483

[30]	Multitemperature parameter optimization for fused deposition modeling based on response surface methodology AIP Advances, 2021 DOI:10.1063/5.0049357

[31]	FDM-Based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and Treatments Polymers, 2020 DOI:10.3390/polym12071529

[32]	Development of an Additive Manufacturing System for the Deposition of Thermoplastics Impregnated with Carbon Fibers Journal of Manufacturing and Materials Processing, 2019 DOI:10.3390/jmmp3020035

[33]	Green Biopolymers and their Nanocomposites Materials Horizons: From Nature to Nanomaterials, 2019 DOI:10.1007/978-981-13-8063-1_2

[34]	Treatment of bamboo fibres in improving mechanical performance of polymer composites – A review 2018 DOI:10.1063/1.5042966

[35]	A review on composite materials and process parameters optimisation for the fused deposition modelling process Virtual and Physical Prototyping, 2017 DOI:10.1080/17452759.2016.1274490

[36]	Effect of Bamboo Flour Grafted Lactide on the Interfacial Compatibility of Polylactic Acid/Bamboo Flour Composites Polymers, 2017 DOI:10.3390/polym9080323

Follow SCIRP

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Open Journal of Composite Materials

Open Journal of Composite Materials

Journals Menu

Home

About SCIRP

Service

Policies