Delamination in Fiber Reinforced Plastics: A Finite Element Approach

Journals Menu

Follow SCIRP

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Engineering

ISSN Print: 1947-3931
ISSN Online: 1947-394X
www.scirp.org/journal/eng
E-mail: eng@scirp.org

Google-based Impact Factor: 1.09
Citations

Journals Menu

"Delamination in Fiber Reinforced Plastics: A Finite Element Approach"
written by P. K. Rakesh, V. Sharma, I. Singh, D. Kumar,
published by Engineering, Vol.3 No.5, 2011

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Drilling Behavior of Glass Fibre Reinforced Polymer Composites
	Polymer Composites: From Computational …, 2024

[2]	LS-Dyna Impact Modelling on Carbon Fibre Reinforced Polymers (CFRP) Composite Aircraft Panel with Various Impactors
	Engineering Proceedings, 2023

[3]	Defect Detection in Bidirectional Glass Fabric Reinforced Thermoplastics Based on 3-D-THz Imaging
	IEEE Transactions …, 2023

[4]	КОНЕЧНО-ЭЛЕМЕНТНОЕ МОДЕЛИРОВАНИЕ ПРОЦЕССА СВЕРЛЕНИЯ ПОЛИМЕРНЫХ БИОКОМПОЗИТОВ, АРМИРОВАННЫХ НАТУРАЛЬНЫМИ …
	Фундаментальные и прикладные …, 2022

[5]	Study of Mechanical Behavior of Carbon Fiber Reinforced Composites
	2022

[6]	Numerical analyses of axial tension mechanisms of 3D orthogonal woven E-glass/epoxy composites with drilled holes
	Textile Research Journal, 2022

[7]	Numerical Simulation of Impact Velocity on CFRP Aircraft Skin with Hat Shaped Stringer
	Journal of Pharmaceutical Negative …, 2022

[8]	Effect of Milling Parameter and Fiber Pull-Out on Machinability Kenaf Fiber Reinforced Plastic Composite Materials
	2021

[9]	Delamination-free drilling of carbon fiber reinforced plastic with variable feed rate
	2021

[10]	Моделирование процесса сверления слоистого материала в LS-DYNA
	2020

[11]	Beitrag zum Verständnis der Zerspanung nachgiebiger Strukturen aus kohlefaserverstärkten Kunststoffen: Charakterisierung, Modellierung und Bewertung …
	2020

[12]	Modeling the drilling process of layered material in program LS-DYNA
	Bulletin PNRPU. Mechanical …, 2020

[13]	Nonlinear modeling of composite wing with application to UAV flight dynamic analysis
	2020

[14]	Optimization of drilling process parameters used in machining of glass fiber reinforced epoxy composite
	2019

[15]	8 Influence of drilling parameters on the thrust force and mechanical properties of biodegradable particleboard composite panels
	… : Materials, Manufacturing and …, 2019

[16]	8. Influence of drilling parameters on the thrust force and mechanical properties of biodegradable particleboard composite panels: A review
	2019

[17]	纤维增强复合材料切削仿真研究进展
	2018

[18]	Drilling of uni-directional carbon fibre reinforced plastics with diamond tools: experiment and finite element study
	2018

[19]	MECHANICAL RESPONSE OF POLYMER MATRIX COMPOSITES USING INDENTATION STRESS-STRAIN PROTOCOLS
	2018

[20]	A Numerical-Experimental Method for Drop Impact Analysis of Composite Landing Gear
	Shock and Vibration, 2017

[21]	A review on finite element method for machining of composite materials
	Composite Structures, 2017

[22]	An approach to evaluate delamination factor when drilling carbon fiber-reinforced plastics using different drill geometries: experiment and finite element study
	The International Journal of Advanced Manufacturing Technology, 2017

[23]	A Study on Parameter Optimization of the Delamination Factor (Fd) in Milling Kenaf Fiber Reinforced Plastics Composite Materials Using DOE Method
	2017

[24]	Finite element analysis on conventional drilling of natural fibre-reinforced polymer bio-composites
	2017

[25]	Mathematical modeling of surface roughness during drilling of resin hybrid GFRP composites
	Applied Mechanics and Materials, 2017

[26]	Meso-scale Modeling of the Drilling of Carbon Fibre Reinforced Plastic: Geometry and Numerical Analysis
	2016

[27]	Finite Element Analysis in Drilling GFRP Composites
	Indian Journal of Science and Technology, 2015

[28]	Drilling of Uni-directional Carbon Fibre Reinforced Plastics with PCD Tools: Experiment and Finite Element Study
	2015

[29]	Experimental Study of Damage and Defect Detection during Drilling of CFRP Composites
	NULL 2014

[30]	Finite element analysis of medium-wheel Bulldozer earth-moving shovel arm based on ANSYS
	2014

[31]	Исследование обработки отверстий в композиционных материалах и смешанных пакетах на основе имитационного моделирования рабочих …
	2013

[32]	Исследование обработки отверстий в композиционных материалах и смешанных пакетах на основе имитационного моделирования рабочих процессов
	2013

[33]	Моделирование резания армированных композиционных материалов: достижения и перспективы
	2011

[34]	ФУНДАМЕНТАЛЬНЫЕ И ПРИКЛАДНЫЕ ПРОБЛЕМЫ ТЕХНИКИ И ТЕХНОЛОГИИ


[35]	LS DYNA Impact Modelling on CFRP Composite Aircraft Panel with Various Impactors
	R Gayathri

[1]	Polymer Composites: From Computational to Experimental Aspects Materials Horizons: From Nature to Nanomaterials, 2024 DOI:10.1007/978-981-97-0888-8_13

[2]	Polymer Composites: From Computational to Experimental Aspects Materials Horizons: From Nature to Nanomaterials, 2024 DOI:10.1007/978-981-97-0888-8_13

[3]	Defect Detection in Bidirectional Glass Fabric Reinforced Thermoplastics Based on 3-D-THz Imaging IEEE Transactions on Terahertz Science and Technology, 2023 DOI:10.1109/TTHZ.2023.3247609

[4]	LS-Dyna Impact Modelling on Carbon Fibre Reinforced Polymers (CFRP) Composite Aircraft Panel with Various Impactors RAiSE-2023, 2023 DOI:10.3390/engproc2023059026

[5]	Defect Detection in Bidirectional Glass Fabric Reinforced Thermoplastics Based on 3-D-THz Imaging IEEE Transactions on Terahertz Science and Technology, 2023 DOI:10.1109/TTHZ.2023.3247609

[6]	Numerical analyses of axial tension mechanisms of 3D orthogonal woven E-glass/epoxy composites with drilled holes Textile Research Journal, 2022 DOI:10.1177/00405175221075057

[7]	Numerical analyses of axial tension mechanisms of 3D orthogonal woven E-glass/epoxy composites with drilled holes Textile Research Journal, 2022 DOI:10.1177/00405175221075057

[8]	Delamination-free drilling of carbon fiber reinforced plastic with variable feed rate Precision Engineering, 2021 DOI:10.1016/j.precisioneng.2021.01.003

[9]	Delamination-free drilling of carbon fiber reinforced plastic with variable feed rate Precision Engineering, 2021 DOI:10.1016/j.precisioneng.2021.01.003

[10]	Delamination-free drilling of carbon fiber reinforced plastic with variable feed rate Precision Engineering, 2021 DOI:10.1016/j.precisioneng.2021.01.003

[11]	Nonlinear modeling of composite wing with application to UAV flight dynamic analysis Mechanical Systems and Signal Processing, 2020 DOI:10.1016/j.ymssp.2019.106542

[12]	A Numerical-Experimental Method for Drop Impact Analysis of Composite Landing Gear Shock and Vibration, 2017 DOI:10.1155/2017/3073524

[13]	An approach to evaluate delamination factor when drilling carbon fiber-reinforced plastics using different drill geometries: experiment and finite element study The International Journal of Advanced Manufacturing Technology, 2017 DOI:10.1007/s00170-017-0880-2

[14]	A review on finite element method for machining of composite materials Composite Structures, 2017 DOI:10.1016/j.compstruct.2017.06.012

Follow SCIRP

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Engineering

Engineering

Journals Menu

Home

About SCIRP

Service

Policies