An Effective Mixing for Lithium Ion Battery Slurries

Journals Menu

Follow SCIRP

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Advances in Chemical Engineering and Science

ISSN Print: 2160-0392
ISSN Online: 2160-0406
www.scirp.org/journal/aces
E-mail: aces@scirp.org

Google-based Impact Factor: 1.22
Citations

Journals Menu

"An Effective Mixing for Lithium Ion Battery Slurries"
written by Darjen Liu, Li-Chun Chen, Ta-Jo Liu, Tan Fan, Erh-Yeh Tsou, Carlos Tiu,
published by Advances in Chemical Engineering and Science, Vol.4 No.4, 2014

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	A critical review on inconsistency mechanism, evaluation methods and improvement measures for lithium-ion battery energy storage systems
	… and Sustainable Energy …, 2024

[2]	Research progress of robust binders with superior mechanical properties for high-performance silicon-based lithium-ion batteries
	Materials Chemistry …, 2024

[3]	Clarification of the dispersion mechanism of cathode slurry of lithium-ion battery under effects of both poly vinylidene fluoride/carbon black ratio and mixing time
	Particuology, 2024

[4]	Battery Health Management-A Perspective of Design, Optimization, Manufacturing, Fault Detection, and Recycling
	Energy Storage and …, 2024

[5]	A Solvent-Free Process Enabled by Polytetrafluoroethlyene/Carbon Black Composites for Fabricating Electrodes for Lithium-Ion Batteries with a High Volumetric …
	Journal of The …, 2023

[6]	Laser Drying Of Graphite Anodes For The Production Of Lithium-Ion Batteries-A Process-And Material-Side Analysis For Sustainable Battery Production
	ESSN: 2701 …, 2023

[7]	Effect of Flame Retardants and Electrolyte Variations on Li-Ion Batteries. Batteries 2023, 9, 82
	2023

[8]	Synthesis and Characterization of PEDOT: PSS-PAs with Good Electrical Conductivity for Supercapacitor
	Chemical Science …, 2023

[9]	Energy-carbon scheduling optimization of battery factory back-end process based on time-of-use characteristics of power grid
	2023 IEEE PELS …, 2023

[10]	Effect of Flame Retardants and Electrolyte Variations on Li-Ion Batteries
	Batteries, 2023

[11]	Lamellar multi-arch microstructure of Co3O4/N-CNTs-CNF composites as anodes for high-performance flexible lithium-ion batteries
	Journal of Energy …, 2023

[12]	Surface Engineering Based on Conductive Agent Dispersion Uniformity: Strategies toward Performance Consistency of Lithium-Ion Batteries
	Langmuir, 2023

[13]	Classification of battery slurry by flow signal processing via echo state network model
	Rheologica Acta, 2023

[14]	A critical review of future aspects of digitalization next generation Li-ion batteries manufacturing process
	Journal of Energy …, 2023

[15]	Processing of Aqueous Graphite–Silicon Oxide Slurries and Its Impact on Rheology, Coating Behavior, Microstructure, and Cell Performance
	Batteries, 2023

[16]	Stress and Manufacturability in Solid-State Lithium-Ion Batteries
	International Journal of …, 2023

[17]	Emerging atomic layer deposition for the development of high-performance lithium-ion batteries
	Electrochemical Energy …, 2023

[18]	A review of research needs in nondestructive evaluation for quality verification in electric vehicle lithium-ion battery cell manufacturing
	Journal of Power …, 2023

[19]	A review of research in the Li-ion battery production and reverse supply chains
	Journal of Energy Storage, 2023

[20]	Electrode fabrication process and its influence in lithium-ion battery performance: State of the art and future trends
	Méndez, CM Costa - Electrochemistry …, 2022

[21]	Advanced manufacturing approaches for electrochemical energy storage devices
	International Materials …, 2022

[22]	Process‐Structure‐Formulation Interactions for Enhanced Sodium Ion Battery Development: A Review
	…, 2022

[23]	Rechargeable batteries of the future—the state of the art from a BATTERY 2030+ perspective
	Advanced Energy …, 2022

[24]	Data specifications for battery manufacturing digitalization: Current status, challenges, and opportunities
	Batteries & …, 2022

[25]	Understanding slurry formulations to guide solution-processing of solid electrolytes
	Journal of Power …, 2022

[26]	Model fluid for coating flows of Li-ion battery anode slurry
	Journal of Materials Science, 2022

[27]	Roadmap on Li-ion battery manufacturing research
	Journal of Physics …, 2022

[28]	Rheological interpretation of the structural change of LiB cathode slurry during the preparation process
	JCIS Open, 2022

[29]	Frequency transducers of gas concentration for the diagnosis of strains of bacteria Helicobacter pylori
	… Science Group. Boston …, 2021

[30]	Investigation of Lithium-Ion Battery Electrode Fabrication Through a Predictive Particle-Scale Model Validated by Experiments
	2021

[31]	JCIS Open
	2021

[32]	Einfluss der Kompaktierung auf die Elektrodenmikrostruktur und elektrochemische Performance bei Lithium-Ionen-Zellen
	2021

[33]	The Role of Pilot Lines in Bridging the Gap Between Fundamental Research and Industrial Production for Lithium‐Ion Battery Cells Relevant to Sustainable …
	Energy Technology, 2021

[34]	Machine Learning-Based on Assessment of the Impact of the Manufacturing Process on Battery Electrode Heterogeneity
	2021

[35]	Effect of calendering on rate performance of Li 4 Ti 5 O 12 anodes for lithium-ion batteries
	2021

[36]	Optimized printed cathode electrodes for high performance batteries
	2021

[37]	Current and future lithium-ion battery manufacturing
	2021

[38]	Opportunities for the State-of-the-Art Production of LIB Electrodes—A Review. Energies 2021, 14, 1406
	2021

[39]	Advanced electrode processing of lithium ion batteries: A review of powder technology in battery fabrication
	2021

[40]	Opportunities for the State-of-the-Art Production of LIB Electrodes—A Review
	2021

[41]	8.5 Analytical studies of piston pulsation homogenization of milk
	2021

[42]	A Model for Investigating Sources of Li-Ion Battery Electrode Heterogeneity: Part I. Electrode Drying and Calendering Processes
	2021

[43]	Viscosity Analysis of Battery Electrode Slurry
	Polymers, 2021

[44]	Quality Improvements for Anode Coating in Lithium-Ion Battery Cell Manufacturing: A Case Study at Northvolt Labs
	2021

[45]	锂离子电池浆料的制备技术及其影响因素
	材料工程, 2021

[46]	Analisi di fattibilità di una Gigafactory da 20 GWh per la produzione di celle di batterie litio-ione.= Feasibility analysis of a 20 GWh Gigafactory for the production of …
	2021

[47]	高濃度粒子分散系のレオロジー制御二次電池, 燃料電池の電極スラリーモデルの液構造と粘性挙動―
	日本接着学会誌, 2020

[48]	Вплив вальцювання на електрохімічні характеристики електрохімічних конденсаторів
	2020

[49]	Functional TEMPO-containing Polymers: Synthesis and Application in Organic Radical Batteries
	2020

[50]	A Thermodynamic and Feasibility Study of Green Solvents for the Fabrication of Water Treatment Membranes
	2020

[51]	High Energy Li‐Ion Electrodes Prepared via a Solventless Melt Process
	2020

[52]	Effects of Extended Aqueous Processing on Structure, Chemistry, and Performance of Polycrystalline LiNixMnyCozO2 Cathode Powders
	2020

[53]	Surface‐Functionalized Graphite as Long Cycle Life Anode Materials for Lithium‐ion Batteries
	2020

[54]	Characterization of the Effects of Solid Binding Peptides on the Synthesis of Lithium Cobalt Phosphate and Lithium Ion Electrode Assembly
	2020

[55]	The Effect of Crystalline Microstructure of PVDF Binder on Mechanical and Electrochemical Performance of Lithium-Ion Batteries Cathode
	2020

[56]	Understanding the Relationships between Ion Transport, Electrode Heterogeneity, and Li-Ion Cell Degradation Through Modeling and Experiment
	2020

[57]	High Energy Li− Ion Electrodes Prepared via a Solventless Melt Process
	2020

[58]	Simple Approach: Heat Treatment to Improve the Electrochemical Performance of Commonly Used Anode Electrodes for Lithium-Ion Batteries
	2020

[59]	Strategy for Long Cycling Performance of Graphite/LiNi1/3Mn1/3Co1/3O2 Full-Cell Through High-Efficiency Slurry Preparation
	2020

[60]	添加回收硅粉于炭复合纸在锂离子负极之应用
	2019

[61]	Na-ion battery development: from electrode processing studies to heat generation model of a monolayer pouch cell
	2019

[62]	Nano-/Micro-engineering for Future Li–Ion Batteries
	Nano-Energetic Materials, 2019

[63]	On the study of mixing and drying on electrochemical performance of spinel LiMn2O4 cathodes
	2019

[64]	Composite Electrode Ink Formulation for All Solid-State Batteries
	2019

[65]	Recycled silicon powder coated on carbon paper used as the anode of lithium ion batteries
	2019

[66]	Microstructural Influence on Electrochemical Properties of LiFePO4/C/Reduced Graphene Oxide Composite Cathode
	2019

[67]	PENGARUH PEMANASAN PADA PROSES PELARUTAN BINDER TERHADAP KINERJA KATODA PADA SEL BATERAI ION-LITIUM
	2019

[68]	Lithium-ion battery chemistries: a primer
	2019

[69]	Влияние микроструктуры на электрохимические свойства композитного катода LiFePO4/C/восстановленный оксид графена
	Электрохимия, 2019

[70]	正极浆料黏度对汽车动力电池的影响
	2018

[71]	Pulvertechnisch hergestellte Werkstoffe für die Elektromobilität—Teil 1: Batterien
	2018

[72]	Current status and challenges for automotive battery production technologies
	Nature Energy, 2018

[73]	Polymer Based Nanocomposites as Multifunctional Structure for Space Radiation Shielding: A Study of Nanomaterial Fabrications and Evaluations
	2018

[74]	Poly (Styrene-Butene/Ethylene-Styrene): a New Polymer Binder for High Performance Printable Lithium-Ion Battery Electrodes
	ACS Applied Energy Materials, 2018

[75]	Investigation of the Use of a Bio-Derived Solvent for Non-Solvent-Induced Phase Separation (NIPS) Fabrication of Polysulfone Membranes
	Membranes, 2018

[76]	The Influence of Slurry Rheology on Lithium‐ion Electrode Processing
	2018

[77]	Simulation and Experiments to Understand the Manufacturing Process, Microstructure and Transport Properties of Porous Electrodes
	2018

[78]	Effect of viscosity of vathode slurry on automotive power battery
	有色金属科学与 …, 2018

[79]	Percolation behaviors of model carbon black pastes
	2018

[80]	3D Printable Lithium Ion Batteries and the Effect of Aspect Ratio of CuAg Nanowires on
	2018

[81]	Production requirements for 35 GWh lithium-ion battery factory
	2018

[82]	The Influence of Slurry Rheology on Lithium-ion Electrode Processing
	2018

[83]	UNDERSTANDING AND IMPROVING MANUFACTURING PROCESSES FOR MAKING LITHIUM-ION BATTERY ELECTRODES
	2017

[84]	用于锂离子电池的石墨烯导电剂: 缘起, 现状及展望
	2017

[85]	All‐Printed, Stretchable Zn‐Ag2O Rechargeable Battery via Hyperelastic Binder for Self‐Powering Wearable Electronics
	2017

[86]	Effect of Composite Electrode Slurry Preparation Method on Electrochemical Characteristics of LiFePO4/C Based Li-ion Cell
	2017

[87]	KAJIAN APLIKASI BAHAN DENGAN KONDUKTIVITAS LISTRIK TINGGI UNTUK MENINGKATKAN UNJUK KERJA BATERAI ION LITIUM
	2017

[88]	Optimization of Microwave Synthesized Carbon Coated Nano LiFePO4 Active Cathode Material Composition for Li-Ion Batteries
	Recent Trends in Materials and Devices, 2017

[89]	Understanding Interfacial‐Energy‐Driven Dry Powder Mixing for Solvent‐Free Additive Manufacturing of Li‐Ion Battery Electrodes
	Advanced Materials Interfaces, 2017

[90]	Simulation Of Li-Ion Coin Cells Using Comsol Multiphysics
	ProQuest Dissertations Publishing, 2017

[91]	Simulation of Micro/Nanopowder Mixing Characteristics for Dry Spray Additive Manufacturing of Li-Ion Battery Electrodes
	2017

[92]	Scalable Dry Printing Manufacturing to Enable Long‐Life and High Energy Lithium‐Ion Batteries
	Advanced Materials Technologies, 2017

[93]	Powder-Based Additive Manufacturing of Li-Ion Batteries and Micropowder Mixing Characteristics
	2017

[94]	Morphological Structure Characterizations in Lithium-Ion Battery (LIB) Slurry under Shear Rotational Conditions by On-Line Dynamic Electrochemical Impedance …
	2017

[95]	Rheological and adhesive properties of Li-ion battery slurry from capillary suspension
	2017

[96]	Graphene conductive additives for lithium ion batteries: Origin, progress and prospect
	Kexue Tongbao …, 2017

[97]	Conveying Advanced Li‐ion Battery Materials into Practice The Impact of Electrode Slurry Preparation Skills
	Advanced Energy Materials, 2016

[98]	Improvement of Lithium‐ion Batteries Performance by Two‐layered Slot‐Die Coating Operation
	Energy Technology, 2016

[99]	Viscoelastic Analysis of Dispersion Process of Highly Concentrated Suspension for LiB Cathodes
	Journal of the Society of Powder Technology, Japan, 2016

[100]	鋰電池極板製作之分析: 混漿與塗佈
	臺灣清華大學學位論文, 2016

[101]	Experiment and simulation of the fabrication process of lithium-ion battery cathodes for determining microstructure and mechanical properties
	Journal of Power Sources, 2016

[102]	Improvement of lithium-ion battery performance using a two-layered cathode by simultaneous slot-die coating
	Journal of Energy Storage, 2016

[103]	Solvent-Free Manufacturing of Electrodes for Lithium-ion Batteries
	Scientific reports, 2016

[104]	リチウムイオン二次電池負極用スラリー分散過程の粘弾性解析
	2016

[105]	Design and Fabrication of a Li-Ion Battery Electrode Coating Fixture⁫
	2015

[106]	The application of micropipette aspiration in molecular mechanics of single cells
	2014

[107]	Surface Engineering Based on Conductive Agent Dispersion Uniformity: Strategies Towards Performance Consistency of Lithium-Ion Batteries


[108]	VAASA 2018

[1]	Clarification of the dispersion mechanism of cathode slurry of lithium-ion battery under effects of both poly vinylidene fluoride/carbon black ratio and mixing time Particuology, 2024 DOI:10.1016/j.partic.2023.08.020

[2]	Research progress of robust binders with superior mechanical properties for high-performance silicon-based lithium-ion batteries Materials Chemistry Frontiers, 2024 DOI:10.1039/D3QM00839H

[3]	Insights Into Scalable Technologies and Process Chains for Sulfide‐Based Solid‐State Battery Production Batteries & Supercaps, 2024 DOI:10.1002/batt.202400142

[4]	Identification of Relevant Parameters for Traceability in the Continuous Mixing Process in Battery Cell Production Energy Technology, 2024 DOI:10.1002/ente.202400493

[5]	Promoting electrochemical rates by concurrent ionic-electronic conductivity enhancement in high mass loading cathode electrode Energy Storage Materials, 2024 DOI:10.1016/j.ensm.2024.103546

[6]	Recent Advances in Electrochemical Science and Technology Springer Proceedings in Materials, 2024 DOI:10.1007/978-981-97-3958-5_6

[7]	Battery health management—a perspective of design, optimization, manufacturing, fault detection, and recycling Energy Storage and Saving, 2024 DOI:10.1016/j.enss.2024.04.001

[8]	Data-driven analysis of temporal evolution of battery slurry in pipe systems Journal of Power Sources, 2024 DOI:10.1016/j.jpowsour.2024.234834

[9]	High-frequency eddy current measurement for the characterization of graphite anode slurries in battery cell production Procedia CIRP, 2024 DOI:10.1016/j.procir.2024.08.266

[10]	A review of research in the Li-ion battery production and reverse supply chains Journal of Energy Storage, 2023 DOI:10.1016/j.est.2023.107622

[11]	Advanced manufacturing approaches for electrochemical energy storage devices International Materials Reviews, 2023 DOI:10.1080/09506608.2022.2086388

[12]	Energy-carbon scheduling optimization of battery factory back-end process based on time-of-use characteristics of power grid 2023 IEEE PELS Students and Young Professionals Symposium (SYPS), 2023 DOI:10.1109/SYPS59767.2023.10268168

[13]	A critical review of future aspects of digitalization next generation Li-ion batteries manufacturing process Journal of Energy Storage, 2023 DOI:10.1016/j.est.2023.109209

[14]	Lamellar multi-arch microstructure of Co3O4/N-CNTs-CNF composites as anodes for high-performance flexible lithium-ion batteries Journal of Energy Storage, 2023 DOI:10.1016/j.est.2023.109481

[15]	A review of research needs in nondestructive evaluation for quality verification in electric vehicle lithium-ion battery cell manufacturing Journal of Power Sources, 2023 DOI:10.1016/j.jpowsour.2023.232742

[16]	Processing of Aqueous Graphite–Silicon Oxide Slurries and Its Impact on Rheology, Coating Behavior, Microstructure, and Cell Performance Batteries, 2023 DOI:10.3390/batteries9120581

[17]	Classification of battery slurry by flow signal processing via echo state network model Rheologica Acta, 2023 DOI:10.1007/s00397-023-01404-0

[18]	Surface Engineering Based on Conductive Agent Dispersion Uniformity: Strategies toward Performance Consistency of Lithium-Ion Batteries Langmuir, 2023 DOI:10.1021/acs.langmuir.3c03170

[19]	Effect of Flame Retardants and Electrolyte Variations on Li-Ion Batteries Batteries, 2023 DOI:10.3390/batteries9020082

[20]	A review of research needs in nondestructive evaluation for quality verification in electric vehicle lithium-ion battery cell manufacturing Journal of Power Sources, 2023 DOI:10.1016/j.jpowsour.2023.232742

[21]	Advanced manufacturing approaches for electrochemical energy storage devices International Materials Reviews, 2023 DOI:10.1080/09506608.2022.2086388

[22]	A review of research in the Li-ion battery production and reverse supply chains Journal of Energy Storage, 2023 DOI:10.1016/j.est.2023.107622

[23]	Stress and Manufacturability in Solid-State Lithium-Ion Batteries International Journal of Precision Engineering and Manufacturing-Green Technology, 2023 DOI:10.1007/s40684-023-00519-2

[24]	Emerging Atomic Layer Deposition for the Development of High-Performance Lithium-Ion Batteries Electrochemical Energy Reviews, 2023 DOI:10.1007/s41918-023-00192-8

[25]	Classification of battery slurry by flow signal processing via echo state network model Rheologica Acta, 2023 DOI:10.1007/s00397-023-01404-0

[26]	A Solvent-Free Process Enabled by Polytetrafluoroethlyene/Carbon Black Composites for Fabricating Electrodes for Lithium-Ion Batteries with a High Volumetric Energy Journal of The Electrochemical Society, 2023 DOI:10.1149/1945-7111/acf525

[27]	A review of research in the Li-ion battery production and reverse supply chains Journal of Energy Storage, 2023 DOI:10.1016/j.est.2023.107622

[28]	Rechargeable Batteries of the Future—The State of the Art from a BATTERY 2030+ Perspective Advanced Energy Materials, 2022 DOI:10.1002/aenm.202102904

[29]	Advanced manufacturing approaches for electrochemical energy storage devices International Materials Reviews, 2022 DOI:10.1080/09506608.2022.2086388

[30]	Understanding slurry formulations to guide solution-processing of solid electrolytes Journal of Power Sources, 2022 DOI:10.1016/j.jpowsour.2022.231894

[31]	Data Specifications for Battery Manufacturing Digitalization: Current Status, Challenges, and Opportunities Batteries & Supercaps, 2022 DOI:10.1002/batt.202200224

[32]	Tailored Digitalization in Electrode Manufacturing: The Backbone of Smart Lithium‐Ion Battery Cell Production Energy Technology, 2022 DOI:10.1002/ente.202200657

[33]	Model fluid for coating flows of Li-ion battery anode slurry Journal of Materials Science, 2022 DOI:10.1007/s10853-022-07615-9

[34]	Roadmap on Li-ion battery manufacturing research Journal of Physics: Energy, 2022 DOI:10.1088/2515-7655/ac8e30

[35]	Rheological interpretation of the structural change of LiB cathode slurry during the preparation process JCIS Open, 2022 DOI:10.1016/j.jciso.2021.100038

[36]	Process‐Structure‐Formulation Interactions for Enhanced Sodium Ion Battery Development: A Review ChemPhysChem, 2022 DOI:10.1002/cphc.202100860

[37]	Current and future lithium-ion battery manufacturing iScience, 2021 DOI:10.1016/j.isci.2021.102332

[38]	Advanced electrode processing of lithium ion batteries: A review of powder technology in battery fabrication Particuology, 2021 DOI:10.1016/j.partic.2020.12.003

[39]	Viscosity Analysis of Battery Electrode Slurry Polymers, 2021 DOI:10.3390/polym13224033

[40]	A Model for Investigating Sources of Li-Ion Battery Electrode Heterogeneity: Part I. Electrode Drying and Calendering Processes Journal of The Electrochemical Society, 2021 DOI:10.1149/1945-7111/ac0bf1

[41]	Machine learning-based assessment of the impact of the manufacturing process on battery electrode heterogeneity Energy and AI, 2021 DOI:10.1016/j.egyai.2021.100090

[42]	Opportunities for the State-of-the-Art Production of LIB Electrodes—A Review Energies, 2021 DOI:10.3390/en14051406

[43]	The Role of Pilot Lines in Bridging the Gap Between Fundamental Research and Industrial Production for Lithium‐Ion Battery Cells Relevant to Sustainable Electromobility: A Review Energy Technology, 2021 DOI:10.1002/ente.202100132

[44]	New insight for electricity amplification in microbial fuel cells (MFCs) applying magnesium hydroxide coated iron nanoparticles Energy Conversion and Management, 2021 DOI:10.1016/j.enconman.2021.114877

[45]	Machine learning-based assessment of the impact of the manufacturing process on battery electrode heterogeneity Energy and AI, 2021 DOI:10.1016/j.egyai.2021.100090

[46]	Optimized Printed Cathode Electrodes for High Performance Batteries Energy Technology, 2021 DOI:10.1002/ente.202000805

[47]	Opportunities for the State-of-the-Art Production of LIB Electrodes—A Review Energies, 2021 DOI:10.3390/en14051406

[48]	Viscosity Analysis of Battery Electrode Slurry Polymers, 2021 DOI:10.3390/polym13224033

[49]	Surface‐Functionalized Graphite as Long Cycle Life Anode Materials for Lithium‐Ion Batteries ChemElectroChem, 2020 DOI:10.1002/celc.201902098

[50]	High Energy Li‐Ion Electrodes Prepared via a Solventless Melt Process Batteries & Supercaps, 2020 DOI:10.1002/batt.201900187

[51]	The Effect of Crystalline Microstructure of PVDF Binder on Mechanical and Electrochemical Performance of Lithium-Ion Batteries Cathode Zeitschrift für Physikalische Chemie, 2020 DOI:10.1515/zpch-2018-1343

[52]	Effects of Extended Aqueous Processing on Structure, Chemistry, and Performance of Polycrystalline LiNixMnyCozO2 Cathode Powders ACS Applied Materials & Interfaces, 2020 DOI:10.1021/acsami.0c20105

[53]	Simple Approach: Heat Treatment to Improve the Electrochemical Performance of Commonly Used Anode Electrodes for Lithium-Ion Batteries ACS Applied Materials & Interfaces, 2020 DOI:10.1021/acsami.0c10823

[54]	Effects of Extended Aqueous Processing on Structure, Chemistry, and Performance of Polycrystalline LiNixMnyCozO2 Cathode Powders ACS Applied Materials & Interfaces, 2020 DOI:10.1021/acsami.0c20105

[55]	High Energy Li−Ion Electrodes Prepared via a Solventless Melt Process Batteries & Supercaps, 2020 DOI:10.1002/batt.201900187

[56]	Surface‐Functionalized Graphite as Long Cycle Life Anode Materials for Lithium‐Ion Batteries ChemElectroChem, 2020 DOI:10.1002/celc.201902098

[57]	The Effect of Crystalline Microstructure of PVDF Binder on Mechanical and Electrochemical Performance of Lithium-Ion Batteries Cathode Zeitschrift für Physikalische Chemie, 2020 DOI:10.1515/zpch-2018-1343

[58]	Optimized Printed Cathode Electrodes for High Performance Batteries Energy Technology, 2020 DOI:10.1002/ente.202000805

[59]	Strategy for Long Cycling Performance of Graphite/LiNi1/3Mn1/3Co1/3O2 Full-Cell Through High-Efficiency Slurry Preparation Journal of The Electrochemical Society, 2020 DOI:10.1149/1945-7111/abd1f6

[60]	Simple Approach: Heat Treatment to Improve the Electrochemical Performance of Commonly Used Anode Electrodes for Lithium-Ion Batteries ACS Applied Materials & Interfaces, 2020 DOI:10.1021/acsami.0c10823

[61]	Effect of calendering on rate performance of Li4Ti5O12 anodes for lithium-ion batteries Journal of Electroceramics, 2020 DOI:10.1007/s10832-020-00227-2

[62]	Recycled silicon powder coated on carbon paper used as the anode of lithium ion batteries New Carbon Materials, 2019 DOI:10.1016/S1872-5805(19)60007-7

[63]	Nano-Energetic Materials Energy, Environment, and Sustainability, 2019 DOI:10.1007/978-981-13-3269-2_7

[64]	The Physics of Semiconductor Devices Springer Proceedings in Physics, 2019 DOI:10.1007/978-3-319-97604-4_184

[65]	On the study of mixing and drying on electrochemical performance of spinel LiMn2O4 cathodes Journal of Renewable and Sustainable Energy, 2019 DOI:10.1063/1.5051583

[66]	Lithium-Ion Battery Chemistries 2019 DOI:10.1016/B978-0-12-814778-8.09996-8

[67]	Microstructural Influence on Electrochemical Properties of LiFePO4/C/Reduced Graphene Oxide Composite Cathode Russian Journal of Electrochemistry, 2019 DOI:10.1134/S1023193519060120

[68]	Composite Electrode Ink Formulation for All Solid-State Batteries Journal of The Electrochemical Society, 2019 DOI:10.1149/2.0141914jes

[69]	Lithium-Ion Battery Chemistries 2019 DOI:10.1016/B978-0-12-814778-8.09996-8

[70]	On the study of mixing and drying on electrochemical performance of spinel LiMn2O4 cathodes Journal of Renewable and Sustainable Energy, 2019 DOI:10.1063/1.5051583

[71]	Percolation behaviors of model carbon black pastes Soft Matter, 2018 DOI:10.1039/C8SM01591K

[72]	Poly(styrene–butene/ethylene–styrene): A New Polymer Binder for High-Performance Printable Lithium-Ion Battery Electrodes ACS Applied Energy Materials, 2018 DOI:10.1021/acsaem.8b00528

[73]	Current status and challenges for automotive battery production technologies Nature Energy, 2018 DOI:10.1038/s41560-018-0130-3

[74]	Current status and challenges for automotive battery production technologies Nature Energy, 2018 DOI:10.1038/s41560-018-0130-3

[75]	Printed Batteries 2018 DOI:10.1002/9781119287902.ch3

[76]	Current status and challenges for automotive battery production technologies Nature Energy, 2018 DOI:10.1038/s41560-018-0130-3

[77]	Investigation of the Use of a Bio-Derived Solvent for Non-Solvent-Induced Phase Separation (NIPS) Fabrication of Polysulfone Membranes Membranes, 2018 DOI:10.3390/membranes8020023

[78]	Pulvertechnisch hergestellte Werkstoffe für die Elektromobilität — Teil 1: Batterien Keramische Zeitschrift, 2018 DOI:10.1007/s42410-018-0031-x

[79]	Poly(styrene–butene/ethylene–styrene): A New Polymer Binder for High-Performance Printable Lithium-Ion Battery Electrodes ACS Applied Energy Materials, 2018 DOI:10.1021/acsaem.8b00528

[80]	Investigation of the Use of a Bio-Derived Solvent for Non-Solvent-Induced Phase Separation (NIPS) Fabrication of Polysulfone Membranes Membranes, 2018 DOI:10.3390/membranes8020023

[81]	Simulation of Micro/Nanopowder Mixing Characteristics for Dry Spray Additive Manufacturing of Li-Ion Battery Electrodes Journal of Micro and Nano-Manufacturing, 2017 DOI:10.1115/1.4037769

[82]	All-Printed, Stretchable Zn-Ag2 O Rechargeable Battery via Hyperelastic Binder for Self-Powering Wearable Electronics Advanced Energy Materials, 2017 DOI:10.1002/aenm.201602096

[83]	Recent Trends in Materials and Devices Springer Proceedings in Physics, 2017 DOI:10.1007/978-3-319-29096-6_30

[84]	Improvement of Lithium-Ion Battery Performance by Two-Layered Slot-Die Coating Operation Energy Technology, 2017 DOI:10.1002/ente.201600536

[85]	Morphological Structure Characterizations in Lithium-Ion Battery (LIB) Slurry under Shear Rotational Conditions by On-Line Dynamic Electrochemical Impedance Spectroscopy (EIS) Method Journal of The Electrochemical Society, 2017 DOI:10.1149/2.0391712jes

[86]	Scalable Dry Printing Manufacturing to Enable Long-Life and High Energy Lithium-Ion Batteries Advanced Materials Technologies, 2017 DOI:10.1002/admt.201700106

[87]	Understanding Interfacial-Energy-Driven Dry Powder Mixing for Solvent-Free Additive Manufacturing of Li-Ion Battery Electrodes Advanced Materials Interfaces, 2017 DOI:10.1002/admi.201700570

[88]	All‐Printed, Stretchable Zn‐Ag2O Rechargeable Battery via Hyperelastic Binder for Self‐Powering Wearable Electronics Advanced Energy Materials, 2017 DOI:10.1002/aenm.201602096

[89]	Understanding Interfacial‐Energy‐Driven Dry Powder Mixing for Solvent‐Free Additive Manufacturing of Li‐Ion Battery Electrodes Advanced Materials Interfaces, 2017 DOI:10.1002/admi.201700570

[90]	Scalable Dry Printing Manufacturing to Enable Long‐Life and High Energy Lithium‐Ion Batteries Advanced Materials Technologies, 2017 DOI:10.1002/admt.201700106

[91]	Improvement of Lithium‐Ion Battery Performance by Two‐Layered Slot–Die Coating Operation Energy Technology, 2017 DOI:10.1002/ente.201600536

[92]	Experiment and simulation of the fabrication process of lithium-ion battery cathodes for determining microstructure and mechanical properties Journal of Power Sources, 2016 DOI:10.1016/j.jpowsour.2016.02.014

[93]	Conveying Advanced Li‐ion Battery Materials into Practice The Impact of Electrode Slurry Preparation Skills Advanced Energy Materials, 2016 DOI:10.1002/aenm.201600655

[94]	Solvent-Free Manufacturing of Electrodes for Lithium-ion Batteries Scientific Reports, 2016 DOI:10.1038/srep23150

[95]	Experiment and simulation of the fabrication process of lithium-ion battery cathodes for determining microstructure and mechanical properties Journal of Power Sources, 2016 DOI:10.1016/j.jpowsour.2016.02.014

[96]	Improvement of lithium-ion battery performance using a two-layered cathode by simultaneous slot-die coating Journal of Energy Storage, 2016 DOI:10.1016/j.est.2015.12.008

[97]	Solvent-Free Manufacturing of Electrodes for Lithium-ion Batteries Scientific Reports, 2016 DOI:10.1038/srep23150

[98]	Conveying Advanced Li-ion Battery Materials into Practice The Impact of Electrode Slurry Preparation Skills Advanced Energy Materials, 2016 DOI:10.1002/aenm.201600655

[99]	Viscoelastic Analysis of Dispersion Process of Highly Concentrated Suspension for LiB Cathodes Journal of the Society of Powder Technology, Japan, 2016 DOI:10.4164/sptj.53.371

[100]	Experiment and simulation of the fabrication process of lithium-ion battery cathodes for determining microstructure and mechanical properties Journal of Power Sources, 2016 DOI:10.1016/j.jpowsour.2016.02.014

[101]	Experiment and simulation of the fabrication process of lithium-ion battery cathodes for determining microstructure and mechanical properties Journal of Power Sources, 2016 DOI:10.1016/j.jpowsour.2016.02.014

Follow SCIRP

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Advances in Chemical Engineering and Science

Advances in Chemical Engineering and Science

Journals Menu

Home

About SCIRP

Service

Policies