Journal of Electromagnetic Analysis and Applications

Journal of Electromagnetic Analysis and Applications

ISSN Print: 1942-0730
ISSN Online: 1942-0749
www.scirp.org/journal/jemaa
E-mail: jemaa@scirp.org
"Design Optimization of Axial Flux Permanent Magnet (AFPM) Synchronous Machine Using 3D FEM Analysis"
written by Joya C. Kappatou, Georgios D. Zalokostas, Dimitrios A. Spyratos,
published by Journal of Electromagnetic Analysis and Applications, Vol.8 No.11, 2016
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] The Financial Aspects behind Designing a Wind Turbine Generator
Wind, 2024
[2] Investigate Influence of Slot-Pole Combination on the Voltage Total Harmonic Distortion of AFPM Generator with Concentrated Windings
2023 Asia Meeting on …, 2023
[3] Investigation of sinusoidal shaped rotor to reduce torque ripple in axial flux permanent magnet machine
… Journal of Ambient …, 2022
[4] Fault Diagnosis in an AFPM Synchronous Generator through Phase EMF Voltage Sum
2021 IEEE 13th International …, 2021
[5] Electromagnetic Performance Comparison of Axial Flux Machine with different PM Shapes for Electric Vehicles
… on Technology and …, 2021
[6] Effect of the magnet shape on the performance of coreless axial flux permanent magnet synchronous generator
2021
[7] Performance analysis of radial flux and axial flux permanent magnet generators for low-speed wind turbine applications
2020
[8] Study of the Total Demagnetization Fault of an AFPM Wind Generator
2020
[9] Investigation of Static Angular and Axis Misalignment in an AFPM Generator
2019
[10] A Study of Static Angular and Axis Eccentricity in a Double-Sided Rotor AFPM Generator using 3D-FEM
2019
[11] Design and analysis of a new axial flux permanent magnet synchronous generator for wind
2019
[12] Analysis of motors for more electric aircraft
2019
[13] Study of the Demagnetization Fault in an AFPM Machine in Relation with the Magnet Location
2018
[14] Demagnetization faults detection in an axial flux permanent magnet synchronous generator
2017
[15] 3-D FEM analysis, prototyping and tests of an axial flux permanent-magnet wind generator
Energies, 2017
[16] Investigación e implementación de un sistema de carga regenerativo para elevar las prestaciones de autonomía en una motocicleta eléctrica.
[17] “Diseño y construcción de una máquina roladora de chapa metálica hasta espesores
Free SCIRP Newsletters
Copyright © 2006-2025 Scientific Research Publishing Inc. All Rights Reserved.
Top