"
Nanoindentation Study on Mechanical Properties of Nano-SiO2/Dental Resin Composites"
written by Chao Zha, Jianhua Hu, Ainong Li, Shangyu Huang, Hanxing Liu, Gang Chen, Anqi Lei, Zuoqi Zhang, Bei Li, Zhengzhi Wang,
published by
Journal of Materials Science and Chemical Engineering,
Vol.6 No.4, 2018
has been cited by the following article(s):
|
[1]
|
The Effect of Heat Treatment on Local Mechanical Properties of Laser Powder Bed Fused and Hot Isostatically Pressed Al-Cu-Mg-Ag-TiB2 (A20X) Aluminum …
|
|
JOM,
2024 |
|
|
|
|
[2]
|
金属材料実験の手引き 2. 特性の計測評価 2-1 力学特性 2-1-6 ナノインデンテーション試験
|
|
まてりあ,
2024 |
|
|
|
|
[3]
|
Insights into laser powder bed fused Scalmalloy®: investigating the correlation between micromechanical and macroscale properties
|
|
Rovira, L Cabrera-Correa… - journal of materials …,
2023 |
|
|
|
|
[4]
|
Interplay between microstructure, micromechanical, and tensile properties in wire arc additive manufactured nickel-aluminum bronze: As-built and heat treated
|
|
Amirkhiz… - Materialia,
2023 |
|
|
|
|
[5]
|
A Comparative Study on the Microscale and Macroscale Mechanical Properties of Dental Resin Composites
|
|
Polymers,
2023 |
|
|
|
|
[6]
|
Improvement of anti-corrosion performance (surface and near the cut edge) and mechanical properties of epoxy coatings modified with nano, micro and hybrid ZnO …
|
|
Journal of …,
2023 |
|
|
|
|
[7]
|
Mechanical characterisation of PEEK-HA composite as an orthopaedic implant
|
|
Advances in Materials and Processing …,
2022 |
|
|
|
|
[8]
|
Analysis of residual stress distribution characteristics of laser surface hardening based on Voronoi model
|
|
Optics & Laser Technology,
2022 |
|
|
|
|
[9]
|
Investigations on the Characterization of Various Adhesive Joints by Means of Nanoindentation and Computer Tomography
|
|
Materials,
2022 |
|
|
|
|
[10]
|
Microstructural-micromechanical correlation in an Al–Cu–Mg–Ag–TiB2 (A205) alloy: additively manufactured and cast
|
|
Materials Science and …,
2022 |
|
|
|
|
[11]
|
Microstructure and Small-Scale Mechanical Properties of Additively Manufactured and Cast Al-Cu-Mg-Ag-TiB2 (A205) Alloy
|
|
2021 |
|
|
|
|
[12]
|
Micromechanics and Indentation Creep of Magnesium Carbon Nanotube Nanocomposites: 298 K to 573 K
|
|
2020 |
|
|
|
|
[13]
|
Ceramic and glass-ceramic fillers in dental composites-A review
|
|
2020 |
|
|
|
|
[14]
|
The influence of titanate coupling agent on the performance of barium titanate/PMMA denture base nanocomposites after SBF storage
|
|
2020 |
|
|
|
|
[15]
|
Galvaniz kaplı çelik sacların kesim bölgelerinde azalan korozyon direncine kompozit kaplamaların etkisinin incelenmesi
|
|
2020 |
|
|
|
|
[16]
|
Effects of Silica Nanoparticles and Silica-Zirconia Nanoclusters on Tribological Properties of Dental Resin Composites
|
|
2018 |
|
|
|
|
[1]
|
Mechanical characterisation of PEEK-HA composite as an orthopaedic implant
Advances in Materials and Processing Technologies,
2022
DOI:10.1080/2374068X.2021.1970990
|
|
|
|
|
[2]
|
Mechanical characterisation of PEEK-HA composite as an orthopaedic implant
Advances in Materials and Processing Technologies,
2021
DOI:10.1080/2374068X.2021.1970990
|
|
|
|