Wear Behaviour of Al-SiCp Metal Matrix Composites and Optimization Using Taguchi Method and Grey Relational Analysis

Journals Menu

Follow SCIRP

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org

Google-based Impact Factor: 1.55
Citations

Journals Menu

"Wear Behaviour of Al-SiCp Metal Matrix Composites and Optimization Using Taguchi Method and Grey Relational Analysis"
written by Shouvik Ghosh, Prasanta Sahoo, Goutam Sutradhar,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.11, 2012

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Experimental Analysis Using Taguchi Optimization Technique on Wear Properties of AL-356 Alloy MMC Reinforced with SiC
	Journal of The Institution of …, 2024

[2]	Corrosion and wear behavior of metal matrix composites
	… Matrix Composites: A …, 2024

[3]	Wear debris analysis of Al-Si/MWCNT nanocomposite during dry sliding wear tests
	Engineering Research Express, 2024

[4]	Study on Micro-structure, Hardness and Optimization of Wear Characteristics of Al6061/TiB2/CeO2 Hotrolled MMCs using Taguchi Method
	Frattura ed Integrità …, 2023

[5]	Dry sliding wear response of aluminium matrix composites (AMCs): a critical review
	Materials Research Express, 2023

[6]	Production of Al/MWCNT Nanocomposite by Powder Metallurgy to Enhance Dry Sliding Wear Performance Aided by Design of Experiment
	Structural Composite …, 2023

[7]	Evaluation of Mechanical, Wear and Fracture Behavior of Silicon Carbide Particulates Reinforced Al7075 Composites using Response Surface Methodology …
	Journal of Materials …, 2023

[8]	Multi-response Optimization on Process Parameters of WEDM for Ti–6Al–4 V Alloy Using Grey Relational Approach
	Optimization Methods for Product and System Design, 2023

[9]	Tribological behaviour of Al6061-SiC hybrid MMC reinforced with 4% MoS2/Cu/Gr
	International Journal of Materials …, 2023

[10]	An Experimental Inquire on Dry Sliding Wear Behaviour of Al-Si-Mg-Cu-SiC Composites Fabricated by Metallurgical Powder Technique
	International Research Journal …, 2023

[11]	Fuzzy Logic Model Analysis on Wear Behaviour of Al-Mg-Sic Composite Produced By Modified Stir Casting Method
	International Conference …, 2023

[12]	Fuzzy Logic Investigations on Wear Analysis of P/M-Produced Aluminum Composite Through Non-lubricated Mode
	Recent Advances in …, 2023

[13]	Investigation and optimization of wear properties of flax fiber reinforced Delrin polymer composite
	Materials Today …, 2023

[14]	A grey-fuzzy based multi-response optimisation study on the friction and wear characteristics of titanium diboride reinforced aluminium matrix composite
	Proceedings of the Institution …, 2023

[15]	Study on Effect of Milling Time on the Mechanical and Wear Properties of the ZA40-B4C-Graphene Hybrid Nanocomposites Fabricated by Vacuum Hot-Pressing
	JOM, 2023

[16]	Wear and frictional attributes of Al-alloy hybrid composite dispersed with hard-ceramic (ZrO2) and solid-lubricant (Gr) particles
	Journal of Dispersion …, 2023

[17]	Tribological behaviour of Al6061/Gr/WC hybrid MMCs using multi-response optimisation
	International Journal of …, 2023

[18]	Impact of boron nitride and silicon carbide on tribological properties of Al-3Gr-based hybrid composites
	Journal of the Brazilian Society of …, 2023

[19]	A combined approach to grey relational analysis and principal component analysis for development of input parameters in the wear characterization of Al7075 …
	Scientia Iranica, 2023

[20]	A comprehensive review on tribological and mechanical properties of metal matrix composites
	AIP Conference …, 2023

[21]	Investigation on Microstructure, Hardness, Wear behavior and Fracture Surface Analysis of Strontium (Sr) and Calcium (Ca) Content A357 Modified Alloy by …
	Frattura ed Integrità …, 2023

[22]	A Review of Research Progress on the Fretting Fatigue Mechanism and Protection Measures of Metal Matrix Composites
	Coatings, 2023

[23]	Tribological performance Optimization of Al2024-TiB2 composites using Grey-Taguchi approach
	International Journal of Cast Metals …, 2022

[24]	MECHANICAL AND TRIBOLOGICAL CHARACTERIZATION OF HYBRID Al6061/B4C/Gr COMPOSITES BY STIR CASTING TECHNIQUE
	Surface Review and …, 2022

[25]	FUZZY LOGIC APPLICATION ON DRY SLIDING WEAR BEHAVIOR OF MATRIX ALUMINUM COMPOSITE PRODUCED BY POWDER METALLURGY METHOD
	Composites …, 2022

[26]	Evaluation of mechanical and wear properties of AA6063/(Si3N4) 6%–12%/(CuN2O6) 2%–4% composite via PM route and optimization through robust design …
	2022

[27]	Novel investigation on tensile strength, compressive strength, hardness, and corrosion resistance of Al6061 hybrid composite with 15% weight fraction of Silicon …
	Journal of Pharmaceutical Negative …, 2022

[28]	A comprehension review of dry sliding wear on aluminum matrix composites
	Materials Today …, 2022

[29]	Tribological behavior of high-entropy alloy particle reinforced aluminum matrix composites and their key impacting factors
	Tribology International, 2022

[30]	Effect of alumina oxide nano-powder on the wear behaviour of CrN coating against cylinder liner using response surface methodology: Processing and …
	Journal of Materials …, 2022

[31]	Caco3 derived from eggshell waste for improving the hardness values and wear behavior of composite coating on mild steel via co-deposition
	The International Journal …, 2022

[32]	Optimization of wear behaviour of Al7075/SiC/Al2O3 MMCs Using statistical method
	Advances in Materials …, 2022

[33]	A Combined approach of Grey Relational Analysis (GRA) and Principal component Analysis (PCA) for development of input parameters on wear characterization of …
	Scientia Iranica, 2022

[34]	Aluminium hybrid composites reinforced with SiC and fly ash particles—recent developments
	Recent advances in layered materials and …, 2021

[35]	Microstructure and Wear Behaviour of Matrix Al7075 Reinforced With Micro Wc-Co Particulate Composite Processed by Stir Casting Method
	2021

[36]	Strength and Wear Characteristics of Aluminum/Zircon/Graphite Composites
	2021

[37]	Microstructural Characterization and Mechanical Behaviour of SiC and Kaoline Reinforced Aluminium Metal Matrix Composites Fabricated Through Powder …
	2021

[38]	Synthesis, Mechanical Testing and Characterization of AlMg Matrix SiC Reinforced Composite Via Powder Metallurgy and Optimization of Process Parameters
	2021

[39]	An overview on the effect of reinforcement and wear behaviour of metal matrix composites
	Materials Today: Proceedings, 2021

[40]	Study on Dry Sliding Wear Characteristics by Taguchi Analysis of Al-Mg-Si-Cu-SiC Composite Prepared by Powder Metallurgy Method
	Trends in Sciences, 2021

[41]	Synthesis, Mechanical Testing and Characterization of AlMg Matrix SiC Reinforced Composite Via Powder Metallurgy and Optimization of Process …
	2021

[42]	Investigation on the Effect of Stirring Process Parameters on the Dispersion of SiC Particles Inside Melting Crucible
	2020

[43]	Tribological characterization of LM26/SiC/Ni.-Gr. Hybrid aluminium matrix composites (HAMCs) for high temperature applications
	2020

[44]	Wear behaviour analysis on aluminium alloy 7050 with reinforced SiC through taguchi approach
	2020

[45]	Wear characteristics of aluminium matrix composites reinforced with Si-based refractory compounds derived from rice husks
	2020

[46]	Multi-objective optimisation of process parameters in turning of Al6061 alloys using DEFORM-3D
	2020

[47]	Multi-response optimization of dry sliding wear parameters of AA6026 using hybrid gray relational analysis coupled with response surface method
	2019

[48]	Dry sliding wear characteristics of aluminium metal matrix composites: a brief overview
	2019

[49]	Optimization of Tribological Properties of Al6061/9% Gr/WC Hybrid Metal Matrix Composites Using FGRA
	2019

[50]	Effect of manufacturing process parameters on the wear rate of Al 6061–Cu–SiCp alloy composites
	2019

[51]	Tool wear optimization in CNC milling operation of Al–Mg2Si alloys by Taguchi method
	2019

[52]	Surface modification of AZ61 magnesium alloy with nano-Al2O3 using laser cladding technique: optimisation of wear properties through hybrid GRA-PCA
	2019

[53]	Investigation of wear characteristics of Al-4032 based metal matrix composite using Taguchi's optimization approach
	2019

[54]	Effect of B4C and MOS2 reinforcement on micro structure and wear properties of aluminum hybrid composite for automotive applications
	2019

[55]	Optimization of wear parameters of Mg-(5.6 Ti+ 3Al)-2.5 B4C composite
	2019

[56]	Investigation of Tribological Behaviour of Al-4032 Based Metal Matrix Composite using Taguchi's Optimization Approach
	2019

[57]	Response Surface Methodology Based Modelling of Friction–Wear Behaviour of Al6061/9% Gr/WC MMCs and Its Optimization Using Fuzzy GRA
	2018

[58]	Parametric study of the dry sliding wear behaviour of AA6082-T6/SiC and AA6082-T6/B4C composites using RSM
	Journal of Mechanical Science and Technology, 2018

[59]	Study on Tribological Behaviour of Al/SiC/MoS2 Hybrid Metal Matrix Composites in High Temperature Environmental Condition
	Silicon, 2018

[60]	Parameter Optimization and the Effect of Parameters on Mechanical Properties of Hybrid Composite
	2018

[61]	Optimization of friction and wear behaviour of Al7075-Al2O3-B4C metal matrix composites using Taguchi method
	IOP Conference Series: Materials Science and Engineering, 2018

[62]	Microstructure and Dry Sliding Wear Behaviour of Al2219-TiC Composites
	Materials Today: Proceedings, 2017

[63]	Development of Hybrid Composites (Al-SiC-C) Through Stir Casting: Machinability Studies
	2017

[64]	Effects of Carbon Black Nanoparticles on Wear Resistance of AA7020/Carbon Black Metal Matrix Composites
	American Journal of Materials Science, 2017

[65]	Tribological Performance of Al-MMC Reinforced with Treated Fly Ash using Response Surface Methodology
	2017

[66]	Optimization of Process Parameters of Stir Casting Technique Using Orthogonal Arrays
	2017

[67]	Microstructure and Tensile Behaviour of B4C Reinforced ZA43 Alloy Composites
	IOP Conference Series: Materials Science and Engineering, 2016

[68]	Синтез карбидо-корундового наполнителя и его воздействие на структуру и свойства поршневого сплава АК12М2МгН
	2016

[69]	Effect of SiC and Graphite Particulates Addition on Wear Behaviour of Al2219 Alloy Hybrid Composites
	IOP Conference Series: Materials Science and Engineering, 2016

[70]	Tribological Characterization of Stir-cast Aluminium-TiB2 Metal Matrix Composites
	Silicon, 2016

[71]	Wear Behavior of Al-SiC Metal Matrix Composite under various Corrosive Environments
	IOP Conference Series: Materials Science and Engineering, 2016

[72]	Dry Sliding Wear Behaviour of Aluminium Alloy 6061-Redmud Metal Matrix Composites by Stir Casting Method
	IJCTA, 2016

[73]	OPTIMIZATION OF VOLUMETRIC WEAR RATE OF AA7075-TiC METAL MATRIX COMPOSITE BY USING TAGUCHI TECHNIQUE
	2016

[74]	Application of Grey-Taguchi Technique for Optimization of Process Parameters for Wear Behavior on AA7075-TiC Metal Matrix Composites
	2016

[75]	Assessment of Some Environmental Pollutants In Wadi El-Rayan Lake–Fayoum Governorate
	Journal of Scientific and Engineering Research, 2016

[76]	Optimisation of process parameters for minimum volumetric wear rate on AA7075-TiC metal matrix composite.
	2016

[77]	Tribological behavior of Al-SiC metal matrix composite in acidic medium
	2016

[78]	EFFECT OF HEAT TREATMENT AND NATURAL AGENING ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF A356 REINFORCED WITH BORON CARBIDE COMPOSITES
	International Journal of Mechanical Engineering and Technology, 2016

[79]	Effect of Heat Treatment on Mechanical Properties of A356 Reinforced With Boron Carbide Composites
	Research Inventy: International Journal of Engineering And Science, 2016

[80]	Microstructure and Tensile Behaviour of B 4 C Reinforced ZA43 Alloy Composites
	2016

[81]	Tribological characterization of stir-cast aluminium-TiB 2 metal matrix composites
	2016

[82]	EFFECT OF HEAT TREATMENT AND NATURAL AGENING ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF A356 REINFORCED WITH …
	2016

[83]	Optimisation of process parameters for minimum volumetric wear rate on AA7075-TiC metal matrix composite
	… of Automotive and …, 2016

[84]	THREE POINT BENDING OF ALUMINIUM MATRIX COMPOSITE PLATE PRODUCED BY STIR CASTING AND STATISTICAL ANALYSIS BY TAGUCHI METHOD
	2015

[85]	Modeling and Analysis of Mechanical Properties of Aluminium Alloy (A413) Processed through Squeeze Casting Route Using Artificial Neural Network Model and Statistical Technique
	Advances in Materials Science and Engineering, 2015

[86]	Al/SiCp Brake Discs Produced by Dissimilar Cast-Bonding
	Materials and Manufacturing Processes, 2015

[87]	Modeling and analysis of mechanical properties of aluminium alloy (A413) processed through squeeze casting route using artificial neural network model and …
	Advances in Materials Science and Engineering, 2015

[88]	The Effect of Particle Size and Processing on the Properties of a Barium Titanate Polymer Composite
	2014

[89]	EFFECT OF BORON CARBIDE PARTICLE IN WEAR CHARACTERISTIC OF CAST ALUMINIUM A356 COMPOSITE
	KSS Raja, VKB Raja - iosrjournals.org, 2014

[90]	Dry Sliding Wear Analysis of Composite Prepared by A Novel Method with Different Furnace Temperature


[91]	A Combined approach of Grey Relational Analysis (GRA) and Principal component Analysis (PCA) for development of input parameters on wear …
	S Saminathan

[1]	Structural Composite Materials Composites Science and Technology, 2024 DOI:10.1007/978-981-99-5982-2_14

[2]	Wear and frictional attributes of Al-alloy hybrid composite dispersed with hard-ceramic (ZrO 2 ) and solid-lubricant (Gr) particles Journal of Dispersion Science and Technology, 2024 DOI:10.1080/01932691.2023.2220784

[3]	Metal Matrix Composites: A Modern Approach to Manufacturing 2024 DOI:10.2174/9789815223439124010011

[4]	Wear debris analysis of Al-Si/MWCNT nanocomposite during dry sliding wear tests Engineering Research Express, 2024 DOI:10.1088/2631-8695/ad4cb0

[5]	Research on Air Quality in the Pearl River Delta Region Based on Grey Relational Analysis E3S Web of Conferences, 2024 DOI:10.1051/e3sconf/202453601011

[6]	Microstructural, Mechanical, and Tribological Characteristics of Ceramic Reinforced Al/Cu Hybrid Matrix Composites Physics of Metals and Metallography, 2024 DOI:10.1134/S0031918X23602044

[7]	Wear and frictional attributes of Al-alloy hybrid composite dispersed with hard-ceramic (ZrO2) and solid-lubricant (Gr) particles Journal of Dispersion Science and Technology, 2023 DOI:10.1080/01932691.2023.2220784

[8]	Optimization Methods for Product and System Design Engineering Optimization: Methods and Applications, 2023 DOI:10.1007/978-981-99-1521-7_2

[9]	A comprehensive review on tribological and mechanical properties of metal matrix composites INTERNATIONAL CONFERENCE ON SMART MATERIALS AND STRUCTURES, ICSMS-2022, 2023 DOI:10.1063/5.0146914

[10]	Impact of boron nitride and silicon carbide on tribological properties of Al-3Gr-based hybrid composites Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2023 DOI:10.1007/s40430-023-04448-8

[11]	Optimization of wear behaviour of Al7075/SiC/Al2O3 MMCs Using statistical method Advances in Materials and Processing Technologies, 2022 DOI:10.1080/2374068X.2022.2036583

[12]	Optimization of wear behaviour of Al7075/SiC/Al2O3 MMCs Using statistical method Advances in Materials and Processing Technologies, 2022 DOI:10.1080/2374068X.2022.2036583

[13]	A comprehension review of dry sliding wear on aluminum matrix composites Materials Today: Proceedings, 2022 DOI:10.1016/j.matpr.2021.11.312

[14]	Optimization of wear behaviour of Al7075/SiC/Al2O3 MMCs Using statistical method Advances in Materials and Processing Technologies, 2022 DOI:10.1080/2374068X.2022.2036583

[15]	Tribological behaviour of aluminium based hybrid metal matrix composites (Al6061/B4C/ZrO2/SiC) Materials Today: Proceedings, 2022 DOI:10.1016/j.matpr.2022.02.173

[16]	Microstructural Characterization and Mechanical Behaviour of SiC and Kaoline Reinforced Aluminium Metal Matrix Composites Fabricated Through Powder Metallurgy Technique Silicon, 2022 DOI:10.1007/s12633-021-01154-9

[17]	A comprehension review of dry sliding wear on aluminum matrix composites Materials Today: Proceedings, 2022 DOI:10.1016/j.matpr.2021.11.312

[18]	Evaluation of mechanical and wear properties of AA6063/(Si3N4)6%–12% /(CuN2O6)2%–4% composite via PM route and optimization through robust design technique Materials Research Express, 2022 DOI:10.1088/2053-1591/ac7d41

[19]	Microstructure and Wear Behaviour of Matrix Al7075 Reinforced With Micro Wc-Co Particulate Composite Processed by Stir Casting Method IOP Conference Series: Materials Science and Engineering, 2021 DOI:10.1088/1757-899X/1013/1/012020

[20]	Recent Advances in Layered Materials and Structures Materials Horizons: From Nature to Nanomaterials, 2021 DOI:10.1007/978-981-33-4550-8_6

[21]	An overview on the effect of reinforcement and wear behaviour of metal matrix composites Materials Today: Proceedings, 2021 DOI:10.1016/j.matpr.2020.12.084

[22]	Wear characteristics of aluminium matrix composites reinforced with Si-based refractory compounds derived from rice husks Cogent Engineering, 2020 DOI:10.1080/23311916.2020.1826634

[23]	Wear characteristics of aluminium matrix composites reinforced with Si-based refractory compounds derived from rice husks Cogent Engineering, 2020 DOI:10.1080/23311916.2020.1826634

[24]	Investigation of wear characteristics of Al-4032 based metal matrix composite using Taguchi’s optimization approach Materials Research Express, 2019 DOI:10.1088/2053-1591/ab3813

[25]	Investigation of Tribological Behaviour of Al-4032 Based Metal Matrix Composite using Taguchi’s Optimization Approach Materials Today: Proceedings, 2019 DOI:10.1016/j.matpr.2019.07.365

[26]	Effect of manufacturing process parameters on the wear rate of Al 6061–Cu–SiCp alloy composites Emerging Materials Research, 2019 DOI:10.1680/jemmr.18.00068

[27]	Parametric study of the dry sliding wear behaviour of AA6082-T6/SiC and AA6082-T6/B4C composites using RSM Journal of Mechanical Science and Technology, 2018 DOI:10.1007/s12206-018-0105-5

[28]	Optimization of friction and wear behaviour of Al7075-Al2O3-B4C metal matrix composites using Taguchi method IOP Conference Series: Materials Science and Engineering, 2018 DOI:10.1088/1757-899X/314/1/012025

[29]	Tribological Performance of Al-MMC Reinforced withTreated Fly Ash using Response Surface Methodology Indian Journal of Science and Technology, 2017 DOI:10.17485/ijst/2017/v10i15/113824

[30]	Microstructure and Dry Sliding Wear Behaviour of Al2219-TiC Composites Materials Today: Proceedings, 2017 DOI:10.1016/j.matpr.2017.08.058

[31]	Tribological Behavior of Al-SiC Metal Matrix Composite in Acidic Medium International Journal of Engineering and Technologies, 2016 DOI:10.18052/www.scipress.com/IJET.8.24

[32]	Tribological Characterization of Stir-cast Aluminium-TiB2 Metal Matrix Composites Silicon, 2016 DOI:10.1007/s12633-016-9437-5

[33]	Effect of SiC and Graphite Particulates Addition on Wear Behaviour of Al2219 Alloy Hybrid Composites IOP Conference Series: Materials Science and Engineering, 2016 DOI:10.1088/1757-899X/149/1/012108

[34]	Microstructure and Tensile Behaviour of B4C Reinforced ZA43 Alloy Composites IOP Conference Series: Materials Science and Engineering, 2016 DOI:10.1088/1757-899X/149/1/012115

[35]	Wear Behavior of Al-SiC Metal Matrix Composite under various Corrosive Environments IOP Conference Series: Materials Science and Engineering, 2016 DOI:10.1088/1757-899X/149/1/012088

[36]	Tribological Behavior of Al-SiC Metal Matrix Composite in Acidic Medium International Journal of Engineering and Technologies, 2016 DOI:10.56431/p-u0m69w

[37]	Tribological Behavior of Al-SiC Metal Matrix Composite in Acidic Medium International Journal of Engineering and Technologies, 2016 DOI:10.56431/p-u0m69w

[38]	Modeling and Analysis of Mechanical Properties of Aluminium Alloy (A413) Processed through Squeeze Casting Route Using Artificial Neural Network Model and Statistical Technique Advances in Materials Science and Engineering, 2015 DOI:10.1155/2015/714762

Follow SCIRP

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

Journals Menu

Home

About SCIRP

Service

Policies