Improved Approach to Determine the Material Parameters for a Combined Hardening Model

Journals Menu

Follow SCIRP

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Materials Sciences and Applications

ISSN Print: 2153-117X
ISSN Online: 2153-1188
www.scirp.org/journal/msa
E-mail: msa@scirp.org

Google-based Impact Factor: 1.34
Citations

Journals Menu

"Improved Approach to Determine the Material Parameters for a Combined Hardening Model"
written by Benjamin Seisenbacher, Gerhard Winter, Florian Grün,
published by Materials Sciences and Applications, Vol.9 No.4, 2018

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Effect of Surface Finishing State on Fatigue Strength of Cast Aluminium and Steel Alloys
	Materials, 2023

[2]	Experimental and numerical investigation of the deep rolling process focussing on 34CrNiMo6 railway axles
	International Journal of …, 2023

[3]	Failure analysis of a natural gas engine exhaust manifold
	Engineering Failure Analysis, 2023

[4]	A Numerically Efficient Method to Assess the Elastic–Plastic Strain Energy Density of Notched and Imperfective Cast Steel Components
	Applied Mechanics, 2023

[5]	Chaboche viscoplastic material model for process simulation of additively manufactured Ti-6Al-4 V parts
	Welding in the …, 2023

[6]	On the Transferability of Fatigue and Cyclic Deformation Data to 100 µm Thin Structures
	Metals, 2022

[7]	Comparison between recent implicit time integration methods with frequency dissipation for nonlinear structural applications
	Latin American Journal …, 2022

[8]	Very high cycle fatigue assessment at elevated temperature of 100 μm thin structures made of high-strength steel X5CrNiCuNb16-4
	Journal of Materials …, 2022

[9]	Investigation and simulation of the age-dependent behaviour of an aluminium alloy under thermomechanical loading
	2020

[10]	Modelling the effect of ageing on the yield strength of an aluminium alloy under cyclic loading at different ageing temperatures and test temperatures.
	2020

[11]	Material modeling in finite element analysis
	2019

[12]	Fuzzy logic enhancement of material hardening parameters obtained from tension–compression test
	Continuum Mechanics and Thermodynamics, 2019

[1]	Chaboche viscoplastic material model for process simulation of additively manufactured Ti-6Al-4 V parts Welding in the World, 2023 DOI:10.1007/s40194-023-01504-8

[2]	Experimental and numerical investigation of the deep rolling process focussing on 34CrNiMo6 railway axles International Journal of Material Forming, 2023 DOI:10.1007/s12289-023-01775-y

[3]	Experimental and numerical investigation of the deep rolling process focussing on 34CrNiMo6 railway axles International Journal of Material Forming, 2023 DOI:10.1007/s12289-023-01775-y

[4]	On the Transferability of Fatigue and Cyclic Deformation Data to 100 µm Thin Structures Metals, 2022 DOI:10.3390/met12091524

[5]	Fuzzy logic enhancement of material hardening parameters obtained from tension–compression test Continuum Mechanics and Thermodynamics, 2019 DOI:10.1007/s00161-019-00805-y

Follow SCIRP

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Materials Sciences and Applications

Materials Sciences and Applications

Journals Menu

Home

About SCIRP

Service

Policies