Intelligent Information Management

Intelligent Information Management

ISSN Print: 2160-5912
ISSN Online: 2160-5920
www.scirp.org/journal/iim
E-mail: iim@scirp.org
"Optimization of Fused Deposition Modelling (FDM) Process Parameters Using Bacterial Foraging Technique"
written by Samir Kumar PANDA, Saumyakant PADHEE, Anoop Kumar SOOD, S. S. MAHAPATRA,
published by Intelligent Information Management, Vol.1 No.2, 2009
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Chemical treatments to enhance surface quality of FFF manufactured parts: a systematic review
2021
[2] Optimization of FFF process parameters by naked mole-rat algorithms with enhanced exploration and exploitation capabilities
2021
[3] بررسی تأثیر متغیرهای فرایند بر خواص مکانیکی قطعات چاپ‌شده از جنس پلی‌اکسی‌متیلن با استفاده از پرینتر سه‌بعدی به روش رسوب‌گذاری لایه‌ای (FDM)‎
2021
[4] Investigation of the effect of process variables on the mechanical properties of printed parts made of polyoxymethylene using a 3D printer by Fused Deposition …
2021
[5] Modelling and evolutionary computation optimization on FDM process for flexural strength using integrated approach RSM and PSO
2021
[6] Analysis of Dimensional Accuracy of ABS M30 Built Parts Using FDM Process
2021
[7] Minimizing Warpage for Macro-Size Fused Deposition Modeling Parts
2021
[8] Mechanical Property and Prediction Model for FDM-3D Printed Polylactic Acid (PLA)
2021
[9] Compact Model for 3D Printer Energy Estimation and Practical Energy-Saving Strategy. Electronics 2021, 10, 483
2021
[10] Development of a bi-directional multi-input-multi-output predictive model for the fused deposition modelling process using co-active adaptive neuro-fuzzy inference …
2021
[11] Parametric optimization of parameters affecting dimension precision of FDM printed part using hybrid Taguchi-MARCOS-nature inspired heuristic optimization …
2021
[12] Optimisation of Strength Properties of FDM Printed Parts—A Critical Review
2021
[13] Multi-Objective Optimization for FDM Process Parameters with Evolutionary Algorithms
Fused Deposition Modeling Based 3D Printing, 2021
[14] Compact Model for 3D Printer Energy Estimation and Practical Energy-Saving Strategy
2021
[15] The effects of printed lattice cell structure superstrates on printed patch antennas
2021
[16] The effect of processing parameters on the mechanical characteristics of PLA produced by a 3D FFF printer
2020
[17] Reducing circularity error by optimizing the Operating parameters in Fused deposition modeling using Genetic Algorithm
2020
[18] The Transferability and Design of Commercial Printer Settings in PLA/PBAT Fused Filament Fabrication
2020
[19] Experimental Investigation on the Effect of Fused Deposition Modelling Parameters for HIPS Material by Experimental Design and MRO Techniques
2020
[20] Optimal FDM Parameters Setting in Enhancing Impact Strength of PP/UHMWPE composite Using Fractal Factorial Design
2020
[21] Enhancing Structural Performance of Short Fiber Reinforced Objects through Customized Tool-Path
2020
[22] Mechanical strength enhancement of 3D printed ABS polymer components using neural network optimization algorithm
Polymers, 2020
[23] Optimizing Fused Deposition Modeling Processing Parameters Using Response Surface Method for Strong Parts
2020
[24] Topology and Build Path Optimization for Reducing Cost in FDM uPrint SE
2020
[25] Flexural Properties Evaluation of Additively Manufactured Components with Various Infill Patterns
2020
[26] Current status and future directions of fused filament fabrication
2020
[27] Experimental Investigation and Empirical Modeling of FDM Process for Tensile Strength Improvement
2020
[28] Data-Driven Modeling of Processes and Properties in Additive Manufacturing
2020
[29] Layer-to-layer physical characteristics and compression behavior of 3D printed polymer metastructures fabricated using different process parameters
2020
[30] Effect of Deposition Strategies and Printing Parameters on Dimensions and Strength of 3D Printed Parts: A Comparative Analysis
2020
[31] Parametric Optimization Based on Mechanical Characterization of Fused Deposition Modelling Fabricated Part Using Utility Concept
2020
[32] Fused Deposition Modelling and Parametric Optimization of ABS-M30
2020
[33] Mechanical Strength Enhancement of 3D Printed Acrylonitrile Butadiene Styrene Polymer Components Using Neural Network Optimization Algorithm
2020
[34] Optimization of FDM process parameters for tensile properties of polylactic acid specimens using Taguchi design of experiment method
2020
[35] FDM 薄板振动特性的理论与实验研究
2019
[36] Bacterial Foraging Optimization in Non-identical Parallel Batch Processing Machines
2019
[37] STUDY ON THE INFLUENCE OF THE RADIUS OF CONNECTION OF THE SPECIMEN OBTAINED BY FDM ON THE AREA OF PROPAGATION OF THE …
2019
[38] Preparation and characterization of thermally stable ABS/HDPE blend for fused filament fabrication
2019
[39] Data-driven modeling of thermal history in additive manufacturing
2019
[40] A Self-Organizing Evolutionary Method to Model and Optimize Correlated Multiresponse Metrics for Additive Manufacturing Processes
2019
[41] Polymer Based Composites via Fused Filament Fabrications (FFF)-A Review and Prospective
International Journal of Engineering Research & Technology, 2019
[42] Analysing the influence of raster angle, layer thickness and infill rate on the compressive behaviour of EVA through CNC-assisted fused layer modelling process
2019
[43] ARIMA-GMDH: a low-order integrated approach for predicting and optimizing the additive manufacturing process parameters
2019
[44] An Experimental Study to Evaluate the Warpage and Cracking Issues in Fused Deposition Modeling
2019
[45] Parameters Optimization of FDM for the Quality of Prototypes Using an Integrated MCDM Approach
2019
[46] An innovative design approach in three-dimensional printing of continuous fiber–reinforced thermoplastic composites via fused deposition modeling process: In-melt …
2019
[47] A Systematic Survey of FDM Process Parameter Optimization and Their Influence on Part Characteristics
2019
[48] Fused deposition modelling: a review
2019
[49] Effect of fused deposition modelling (FDM) process parameters on tensile strength of carbon fibre PLA
2019
[50] Parametric Optimization of FDM Processed Part for Improving Surface Finish Using MOORA Technique and Desirability Function Analysis
International Journal of Applied Engineering Research, 2019
[51] 3D printing materials for large-scale insulation and support matrices: thesis by publications presented in partial fulfilment of the requirements for the degree of Doctor …
2019
[52] Dynamic Mechanical Behavior from Hybrid Additive Manufacturing
2019
[53] Modeling and Optimization of Rapid Prototyping Process
Modeling and Optimization of Advanced Manufacturing Processes, 2019
[54] PCA-based desirability method for dimensional improvement of part extruded by fused deposition modelling technology
2019
[55] Preliminary investigations of polylactic acid (PLA) properties
2019
[56] 3D printing: Overview of ABS evolvement
2019
[57] Optimization and reliability analysis to improve surface quality and mechanical characteristics of heat-treated fused filament fabricated parts
2019
[58] 3D Printing of Polyether-ether-ketone for Biomedical Applications
2019
[59] Effect of Filling Pattern on the Tensile and Flexural Mechanical Properties of FDM 3D Printed Products
2019
[60] Bacterial foraging optimization algorithm in robotic cells with sequence-dependent setup times
2019
[61] Rapid prototyping of functional microstructured polymer-based composites
2018
[62] Optimization of Design Process of Fused Filament Fabrication (FFF) 3D Printing
2018
[63] Experimental investigation of 3D-printed polymer-based MR sandwich beam under discretized magnetic field
2018
[64] Investigation of Dimensional Accuracy and Material Performance in Fused Deposition Modeling
2018
[65] Board 118: Lessons Learned from a Collaborative NSF RET Program involving Three Regional Universities
2018
[66] Experimental optimization of fused deposition modeling process parameters: a Taguchi process approach for dimension and tolerance control
Proceedings of the International Conference on Industrial Engineering and Operations Management, 2018
[67] Modeling and Optimization of Advanced Manufacturing Processes
Modeling and Optimization of Advanced Manufacturing Processes, 2018
[68] A novel method of reliability-centered process optimization for additive manufacturing
Microelectronics Reliability, 2018
[69] Minimizing voids for a material extrusion-based process
Rapid Prototyping Journal, 2018
[70] Manufacturability of Mechanical Structure Fabricated using Entry Level 3D Printer
2018
[71] Minimizing error on circularity of FDM manufactured part
Materials Today: Proceedings, 2018
[72] The effects of voids on structural properties of fused deposition modelled parts: a probabilistic approach
The International Journal of Advanced Manufacturing Technology, 2018
[73] Development and Integration of Stretchable Electronic Components into Light-Emitting Devices. pdf
2018
[74] Development of Optimal Material Extrusion Additive Manufacturing Tool Path Parameters for Minimizing Void Regions Using Contemporary Tool Path Solutions
2018
[75] Improving mechanical properties of continuous fiber-reinforced thermoplastic composites produced by FDM 3D printer
Journal of Reinforced Plastics and Composites, 2018
[76] Powder Bed Based Laser Additive Manufacturing Process of Stainless Steel: A Review
Materials Today: Proceedings, 2018
[77] Investigating the effect of fused deposition modeling processing parameters using Taguchi design of experiment method
Journal of Manufacturing Processes, 2018
[78] Development and Integration of Stretchable Electronic Components into Light-Emitting Devices
2018
[79] Metal matrix composite from thermoplastic waste
2018
[80] Additive Manufacturing Process Investigation for the Fabrication of Composite Scaffolds for Soft Tissue Application
2018
[81] International Journal of Technical Innovation in Modern Engineering & Science (IJTIMES)
2018
[82] Techniques for rapid prototyping of scale models of blades for wind turbines
2018
[83] Study of effects on mechanical properties of PLA filament which is blended with recycled PLA materials
2018
[84] Structure Fabricated using Entry Level 3D Printer
2018
[85] A Review of Taguchi Optimization Techniques in Additive Manufacturing Techniques
2018
[86] EFFECT OF INTERNAL STRUCTURES ON
2017
[87] Coffee Powder Reused as a Composite Material
2017
[88] A New 3D Printing Technique Using Extrusion of Photopolymer
2017
[89] OPTIMIZATION OF FUSED DEPOSITION MODELING PROCESS PARAMETER FOR BETTER MECHANICAL STRENGTH AND SURFACE ROUGHNESS
International Journal of Mechanical Engineering, 2017
[90] Influence of Processing Parameters on Fused Deposition Modeling
2017
[91] Comportement des pièces obtenues par impression 3D
2017
[92] Mechanical property optimization of fused deposition modeled polylactic acid components via design of experiments
2017
[93] Mechanical Property Characterization of Additive Manufactured ABS Material Using Design of Experiment Approach
2017
[94] Modeling and Optimization of Tensile Strength of ABS Parts Manufactured by the Fused Deposition Modeling Process
2017
[95] Three-Dimensional Printed Dielectric Substrates for Radio Frequency Applications
2017
[96] Bacteria Foraging Optimization Algorithm for Robotic Cell Scheduling Problem
Materials Today: Proceedings, 2017
[97] Empirical Study of In-Plane Shrinkage and Bulging of Circular Cylinders Fabricated with the Fused Deposition Modeling Additive Manufacturing Method
2017
[98] Experimental investigation of effects of build parameters on flexural properties in fused deposition modelling parts
Virtual and Physical Prototyping, 2017
[99] Evaluating Mechanical Properties and Failure Mechanisms of Fused Deposition Modeling Acrylonitrile Butadiene Styrene Parts
2017
[100] Experimental Optimization of Fused Deposition Modelling Processing Parameters: a Design-for-Manufacturing Approach
Procedia Manufacturing, 2017
[101] The quantitative research of interaction between key parameters and the effects on mechanical property in FDM
Advances in Materials Science and Engineering, 2017
[102] MS Uddin
2017
[103] Effect of heterogeneity in additively manufactured dielectric structures on RF response of microstrip patch antennas
International Journal of RF and Microwave Computer‐Aided Engineering, 2017
[104] An Empirical Design Tool for Estimating In-Plane Diametric Shrinkage and Bulging of Circular Cylinders Made With Fused-Deposition Modeling
2017
[105] Optimisation for geometrical dimension of a product using 3D printer based on fused deposition modelling
International Journal of Additive and Subtractive Materials Manufacturing, 2017
[106] Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF)
2017
[107] 3D Printing of Polylactic Acid
Advances in Polymer Science book series, 2017
[108] Influence of processing parameters on creep and recovery behavior of FDM manufactured part using definitive screening design and ANN
Rapid Prototyping Journal, 2017
[109] ANALYSIS OF EFFECT OF INTERNAL STRUCTURES ON TENSILE STRENGTH OF THE FDM PARTS
International Journal of Pure and Applied Mathematics, 2017
[110] Comprehensive investigation of mechanical properties of fused deposition modelling: a dissertation presented in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Engineering at Massey University, Albany, New Zealand
Thesis, 2017
[111] Optical Investigation of Component Made by FDM Technology
Applied Mechanics and Materials, 2016
[112] Throughput and Strength Optimization for Fused Deposition Modeling of Ankle-Foot Orthotics
2016
[113] Multiobjective Optimization of Solar Powered Irrigation System with Fuzzy Type-2 Noise Modelling
Emerging Research on Applied Fuzzy Sets and Intuitionistic Fuzzy Matrices, 2016
[114] Effect of Process Parameters on Dynamic Mechanical Performance of FDM PC/ABS Printed Parts Through Design of Experiment
Journal of Materials Engineering and Performance, 2016
[115] Effect of build parameters on mechanical properties of ultem 9085 parts by fused deposition modeling
2016
[116] A Review on Fabricating Procedures in Rapid Prototyping
3D Printing: Breakthroughs in Research and Practice, 2016
[117] Fused deposition modelling based rapid patterns for investment casting applications: a review
Rapid Prototyping Journal, 2016
[118] Studies on Effect of Fused Deposition Modelling Process Parameters on Ultimate Tensile Strength and Dimensional Accuracy of Nylon
IOP Conference Series: Materials Science and Engineering, 2016
[119] Sliding Wear Analysis of a Metallic Coating on ABS Plastic Substrate.
Applied Mechanics & Materials, 2016
[120] Effects of build parameters on compression properties for ULTEM 9085 parts by fused deposition modeling
2016
[121] Coffe Power Reused as a Composite Material. A Step in the Right Direction
Dissertation, Open Repository of the University of Porto, 2016
[122] Summer Research and Collaborative Professional Development Experience for NSF RET Teachers in Advanced Manufacturing and Materials
2016
[123] 3D Printed Porous Dielectric Substrates for RF Applications
2016
[124] Sliding Wear Analysis of a Metallic Coating on ABS Plastic Substrate
2016
[125] ESTUDO DA INFLUÊNCIA DOS PARÂMETROS DE PROCESSO NA QUALIDADE DE ESTRUTURAS FABRICADAS EM PLA POR MANUFATURA …
2015
[126] Investigation on Mechanical Properties, Geometric Accuracy and Surface Roughness Improvement for Fused Deposition Modeling
2015
[127] ESTUDO DA INFLUÊNCIA DOS PARÂMETROS DE PROCESSO NA QUALIDADE DE ESTRUTURAS FABRICADAS EM PLA POR MANUFATURA ADITIVA …
2015
[128] Mechanical Property Optimization of FDM PLA in Shear with Multiple Objectives
JOM, 2015
[129] Optimization of Build Time and Model Volume for A FDM Maxum Modeler Using Response Surface Methodology
2015
[130] Topology Optimization For Thin Walled Structures Utilizing Simp Method By Additive Manufacturing Using Optimized Conditions
2015
[131] Klejenie w technologii szybkiego prototypowania
2015
[132] Performance evaluation of factors affecting cutting forces on CNC Milling using Digraph and Matrix method
International Journal of Advance Engineering and Research Development, 2015
[133] Utilizing a Design of Experiments Approach to Optimize the Processing Parameters for Extrusion-Based Rapid Prototyping of Bombyx Mori Silk
ProQuest Dissertations Publishing, 2015
[134] Utilizing a Design of Experiments Approach to Optimize the Processing Parameters for Extrusion- Based Rapid Prototyping of Bombyx Mori Silk
2015
[135] Analysis of Applying Ultrasonic Frequency on a Desktop FDM Nozzle
Applied Mechanics and Materials, 2015
[136] Characterization and development of polycaprolactone (PCL)/montmorillonite (MMT)/hydroxapaptite (HA) nanocomposites for fused deposition modelling (FDM) …
2015
[137] Estudo da influência dos parâmetros de processo na qualidade de estruturas fabricadas em PLA por manufatura aditiva por extrusão
2015
[138] Characterization and development of polycaprolactone (PCL)/montmorillonite (MMT)/hydroxapaptite (HA) nano-composites for fused deposition modelling …
2015
[139] Influence of some process parameters on build time, material consumption, and surface roughness of FDM processed parts: inferences based on the Taguchi …
2014
[140] Fused Deposition Modeling–A State of Art Review and Future Applications
2014
[141] Fused deposition modelling (FDM) process parameter prediction and optimization using group method for data handling (GMDH) and differential evolution (DE)
The International Journal of Advanced Manufacturing Technology, 2014
[142] Characterization and Optimization of Mechanical Properties of ABS Parts Manufactured by the Fused Deposition Modelling (FDM) Process
International Journal of Manufacturing Engineering, 2014
[143] The Printed Machine Tool for Micro Machining
Advanced Materials Research, 2014
[144] Harsh environment materials
2014
[145] Polymer Single-Screw Extrusion With Metal Powder Reinforcement
2014
[146] Experimental Evaluation of FDM Process for Model Material Volume Optimization for Cylindrical Primitives
2014
[147] Influence of process parameters on dimensional accuracy of parts manufactured using Fused Deposition Modelling technology
Advances in Science and Technology–Research Journal, 2013
[148] Influence of Some Process Parameters on Build Time, Material Consumption, and Surface Roughness of FDM Processed Parts: Inferences Based on the Taguchi Design of Experiments
Proceedings of The 2014 IAJC/ISAM Joint International Conference, 2013
[149] Application of fusion deposition modelling for rapid investment casting–a review
International Journal of Materials Engineering Innovation, 2012
[150] Bayesian regularization-based Levenberg–Marquardt neural model combined with BFOA for improving surface finish of FDM processed part
The International Journal of Advanced Manufacturing Technology, 2012
[151] Application of fusion deposition modelling for rapid investment casting- a review
2012
Free SCIRP Newsletters
Copyright © 2006-2023 Scientific Research Publishing Inc. All Rights Reserved.
Top