Natural Science

Natural Science

ISSN Print: 2150-4091
ISSN Online: 2150-4105
www.scirp.org/journal/ns
E-mail: ns@scirp.org
"Fabrication and characterization copper/diamond composites for heat sink application using powder metallurgy"
written by Zeinab Abdel Hamid, Sayed F. Moustafa, Fatma A. Morsy, Nevien Abdel Atty khalifa, Fatma Abdel Mouez,
published by Natural Science, Vol.3 No.11, 2011
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Study on the Microstructure and Mechanical Properties of Diamond Particle-Reinforced Copper-Iron Sandwich Composites Prepared by Powder Metallurgy
Materials, 2022
[2] Effects of Ag on the oxidation kinetics and properties in copper-alumina composites during in-situ fabrication
2020
[3] Применение высокоразрешающих методов исследования при конструировании интерфейса алмаз-матрица для повышения стойкости алмазного …
2020
[4] Structural, mechanical and tribological properties of Cu–ZrO2/GNPs hybrid nanocomposites
2019
[5] Features of the Structural-Phase State of the Diamond-Matrix Boundary Zone in Diamond-Containing Composite Materials
2019
[6] Enhancing the oxidation resistance and electrical conductivity of alumina reinforced copper-based composites via introducing Ag and annealing treatment
2019
[7] Structural and phase characteristics of the diamond/matrix interfacial zone in high-resistant diamond composites
Composite Interfaces, 2018
[8] Metal Matrix Composites with Diamond for Abrasion Resistance
2018
[9] Mechanical and Physical Properties of Hybrid Cu-Graphite Composites Prepared via Powder Metallurgy Technique.
2017
[10] Microstructural and wear characterizations of Ultra-Dispersed Diamond (UDD) reinforced Cu-15 wt.% Ti composites fabricated via mechanical alloying and …
2017
[11] Mechanical and Physical Properties of Hybrid Cu-Graphite Composites Prepared via Powder Metallurgy Technique
2017
[12] Finite Element Analysis of Interfacial Debonding in Copper/Diamond Composites for Thermal Management Applications
Materials, 2017
[13] Mechanical and physical properties of hybrid Cu-graphite Composite prepared via powder metallurgy technique
2017
[14] An experimental investigation of bonding strengths for plasma facing components
International journal of energy research, 2017
[15] Template-free preparation of self-standing porous diamond films by hot filament chemical vapor deposition
2016
[16] Effect of sintering on the relative density of Cr-coated diamond/Cu composites prepared by spark plasma sintering
International Journal of Minerals, Metallurgy, and Materials, 2016
[17] Fabrication, Microstructure, Thermal and Electrical Properties of Copper Heat Sink Composites
2016
[18] Chemical and Metallurgy Department, Tshwane University of Technology. Pretoria, South Africa. Bag X680. Phone:+ 27736193028. dayo525@ yahoo. com
2014
[19] Tribological study of hot pressed oxide dispersion strengthened 2205 DSS composite
Acta Universitaria, 2014
[20] Effect of SPS consolidation parameters on submicron Cu and Cu–CNT composites for thermal management
Powder Technology, 2014
[21] Bezprądowa metalizacja materiałów węglowych. Część II. Metalizacja diamentu
Inżynieria Powierzchni, 2013
[22] Electroless Ni-Cr-B on Diamond Particles for Fabricated Copper/Diamond Composites as Heat Sink Materials
ZA Hamid, FA Mouez, FA Morsy - studentsoutlook.com, 2013
[23] Coating of diamond particles for production of metal matrix composites
Surface Engineering, 2013
[24] Electroless Ni–Cr–B on Diamond Particles for Fabricated Copper/Diamond Composites as Heat Sink Materials
2013
Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top