"Influence of Degree of Cold-Drawing on the Mechanical Properties of Low Carbon Steel"
written by Nurudeen A. Raji, Oluleke O. Oluwole,
published by Materials Sciences and Applications, Vol.2 No.11, 2011
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Microstructure and Mechanical Properties of Cold Rolled AISI 1018 Low Carbon Steel
2019
[2] Optimization of the Fabrication of Cold Drawn Steel Wire Through Classification and Clustering Machine Learning Algorithms
2019
[3] Optimasi Proses Annealing pada Proses Fine Drawing Untu Kmemperbaiki Sifat Mekanis Produk Kawat Tembaga
2018
[4] Evolution of deformation texture in cold drawing of steel tubes using EBSD analysis and FEM simulation
2018
[5] Metodología para el estudio y diseño tecnológico del proceso secuencial de estirado multi-etapa de alambre y barras de sección circular.
2017
[6] COLD DRAWING OF STRAIN HARDENING CARBON STEEL
Journal of Manufacturing Technology Research, 2017
[7] Modeling and Analysis of Cold Drawing Process: Parameters and Methods
Handbook of Research on Manufacturing Process Modeling and Optimization Strategies, 2017
[8] Phenomenological Model of Low-Carbon Steels Hardening during Multistage Drawing
Solid State Phenomena, 2017
[9] Micromechanically guided design of graded ultrafine-grained dual-phase steel
Dissertation, 2016
[10] Pengaruh Proses Deformasi Plastis Dengan Metode Hammering Terhadap Sifat Mekanis Dan Microstruktur Baja Bohler K460 (AISI O1)
2016
[11] Study and development of empirical relations among various physical parameters of LPG cylinder material and suggest fail safe inspection plan for manufacturing
2015
[12] Influence of the Degree of Cold Drawing on the Microstructure and Properties of Pipes Used for Dampers
Advanced Materials Research, 2014
[13] Phase Field Simulation for Recrystallization Kinetics of Cold-Drawn 0.12 wt% C Steel in Full Annealing
NA Raji, OO Oluwole - ijser.org, 2014
[14] RESPONSE SURFACE OPTIMIZATION OF SOME PROPERTIES OF PROCESS ANNEALED LOW CARBON STEEL
NA Raji, OO Oluwole - ijser.org, 2014
[15] Microstructure Evolution and its Influence onTensileBehavior of Process Annealed Cold Drawn 0.12 wt% C Steel
NA Raji, OO Oluwole - ijser.org, 2014
[16] Microestructura y propiedades mecánicas del Acero AISI 1016 calibrado procesado por ECAP
Universitas Scientiarum, 2014
[17] Microstructure and mechanical properties of cold drawn AISI 1016 steel processed by ECAP
Universitas Scientiarum, 2014
[18] COMPARATIVE ANALYSIS OF LPG CYLINDER HARDNESS VALUES OBTAINED FROM BRINELL HARDNESS TEST AND PORTABLE HARDNESS TESTER
Int J Adv Engg Tech/IV/III/July-Sept, 2013
[19] Recrystallization Kinetics and Microstructure Evolution of Annealed Cold-Drawn Low-Carbon Steel
Journal of Crystallization Process and Technology, 2013
[20] STUDY ON LPG CYLI
Int J Adv Engg Tech/IV/III/July-Sept, 2013
[21] DESIGN AND ANALYSIS OF PROCESS PARAMETERS ON MULTISTAGE WIRE DRAWING PROCESS-A REVIEW
[22] Investigation the Effect of Roller's Speed and Diameter on Coefficient of Friction During Rolling Process