has been cited by the following article(s):
|
[1]
|
Cr-substituted nanocrystalline Ni–Co ferrites: tuning dielectric, magnetic, structural, X-band microwave absorption, and characteristic properties
|
|
Journal of Materials Science: Materials in Electronics,
2023 |
|
|
|
|
[2]
|
Recent advances in electroless nickel‑boron coatings
|
|
Surface and Coatings …,
2022 |
|
|
|
|
[3]
|
Mechanical Behaviour of Hard Chromium Deposited from a Trivalent Chromium Bath
|
|
Coatings,
2022 |
|
|
|
|
[4]
|
Comparative Analysis of the Wear Performance of Spindle Hook Teeth During Fieldwork
|
|
Journal of …,
2022 |
|
|
|
|
[5]
|
Influence of Cr+ 3 ions substitution on the magnetic and optical properties of NiZnCr Ferrite/PVA/Rhodamine dye nanocomposite film
|
|
Al-Azhar Bulletin of …,
2022 |
|
|
|
|
[6]
|
The Impact of Heat Treatment on the Behavior of a Hot-Dip Zinc Coating Applied to Steel During Dry Friction
|
|
2021 |
|
|
|
|
[7]
|
Comparison of the Tribological Properties of the Thermal Diffusion Zinc Coating to the Classic and Heat Treated Hot-Dip Zinc Coatings
|
|
2021 |
|
|
|
|
[8]
|
Electromagnetic properties of Cr-substituted nickel ferrite nanoparticles and their microwave absorption performance
|
|
2020 |
|
|
|
|
[9]
|
Study on the Electrodeposition of Chromium from Cr (III) Solution in the Presence of Oxalate and Acetate Anions
|
|
2020 |
|
|
|
|
[10]
|
Gradual Change of Pulse Parameters as a New Strategy for Synthesis of Functionally Graded Ni-Cr Coatings
|
|
2019 |
|
|
|
|
[11]
|
Pengaruh Variasi Kuat Arus Terhadap Ketebalan, Kekerasa dan Ketahana Korosi Hasil Elektroplating Nikel-Hard Chromium Pada Baja AISI 4340
|
|
2019 |
|
|
|
|
[12]
|
Laser peening enhances tribological resistance of electrodeposited Cr coatings reinforced with yttria stabilized zirconia and carbon nano tubes
|
|
2019 |
|
|
|
|
[13]
|
Comparison on Microstructure and Properties of Stainless Steel Layer Formed by Extreme High-Speed and Conventional Laser Melting Deposition
|
|
2019 |
|
|
|
|
[14]
|
Pengaruh Variasi Kuat Arus Terhadap Ketebalan, Kekerasan dan Ketahanan Korosi Hasil Elektroplating Nikel-Hard Chromium pada Baja AISI 4340
|
|
2018 |
|
|
|
|
[15]
|
Microabrasive Wear of Titanium Chrome Plated
|
|
Proceedings of the 7th International Conference on Fracture Fatigue and Wear,
2018 |
|
|
|
|
[16]
|
A review on the surface treatments used to create wear and corrosion resistant steel surfaces
|
|
|
|
|
|
|
[1]
|
An Estimation of Local Residual Stresses in Amorphous and Crystallized Trivalent Chromium Coatings
Coatings,
2023
DOI:10.3390/coatings13010124
|
|
|
|
|
[2]
|
Comparative Analysis of the Wear Performance of Spindle Hook Teeth During Fieldwork
Journal of Tribology,
2022
DOI:10.1115/1.4052636
|
|
|
|
|
[3]
|
Mechanical Behaviour of Hard Chromium Deposited from a Trivalent Chromium Bath
Coatings,
2022
DOI:10.3390/coatings12030354
|
|
|
|
|
[4]
|
Aşınma ve Korozyona Dirençli Çelik Yüzeyler Oluşturmak Için Kullanılan Yüzey İşlemleri Üzerine Bir Derleme
Journal of Polytechnic,
2022
DOI:10.2339/politeknik.1001951
|
|
|
|
|
[5]
|
The Impact of Heat Treatment on the Behavior of a Hot-Dip Zinc Coating Applied to Steel During Dry Friction
Materials,
2021
DOI:10.3390/ma14030660
|
|
|
|
|
[6]
|
Comparison of the Tribological Properties of the Thermal Diffusion Zinc Coating to the Classic and Heat Treated Hot-Dip Zinc Coatings
Materials,
2021
DOI:10.3390/ma14071655
|
|
|
|
|
[7]
|
Comparison on Microstructure and Properties of Stainless Steel Layer Formed by Extreme High-Speed and Conventional Laser Melting Deposition
Frontiers in Materials,
2019
DOI:10.3389/fmats.2019.00248
|
|
|
|