Numerical Simulation of Varied Buffer Layer of Solar Cells Based on Cigs

ISSN Print: 2164-5345
ISSN Online: 2164-5353
www.scirp.org/journal/mnsms
E-mail: mnsms@scirp.org

"Numerical Simulation of Varied Buffer Layer of Solar Cells Based on Cigs"
written by Sampson Oladapo Oyedele, Boko Aka,
published by Modeling and Numerical Simulation of Material Science, Vol.7 No.3, 2017

has been cited by the following article(s):

[1]	ZnO: Al/ZnS/n-CdTe heterojunctions' electric and photoelectric properties
	Optik, 2023

[2]	Enhanced Performance of MoSe2-CIGS Solar Cell with ZnSe Buffer Layer
	VLSI, Microwave and Wireless Technologies …, 2022

[3]	Comparison of Various Thin-Film-Based Absorber Materials: A Viable Approach for Next-Generation Solar Cells
	Coatings, 2022

[4]	Numerical Studies of Optimising Various Buffer Layers to Enhance the Performance of Tin Sulfide (SnS)-Based Solar Cells
	2021

[5]	Simulation of CdTe, CIGS and CZTS Solar Cells using WxAMPS Software
	2021

[6]	Design and performance investigation of a highly efficient copper-indium-gallium-selenide solar cell
	Journal of …, 2021

[7]	Application Scope of ZnSe-In2S2 as a Dual Buffer Layer as a Substitute of CdS Buffer Layer in CIGS Based Solar Cell
	International Journal of Innovative Science and Research Technology, 2020

[8]	Development of high efficiency CZTS solar cell through buffer layer parameters optimization using SCAPS-1D
	2020

[9]	Influence of chromium incorporation on optoelectronic and magnetic properties of Zn 1− x Cr x S nanocrystals
	2020

[10]	Simulation of double buffer layer on CIGS solar cell with SCAPS software
	2019

[11]	Numerical Simulation for Optimal Thickness Combination of CdS/ZnS Dual Buffer Layer CuInGaSe2 Solar Cell Using SCAPS 1D
	2019

[12]	Manal A. Mahdy

[1]	Emerging BaZrS3 and Ba(Zr,Ti)S3 Chalcogenide Perovskite Solar Cells: A Numerical Approach Toward Device Engineering and Unlocking Efficiency ACS Omega, 2024 DOI:10.1021/acsomega.3c06627

[2]	VLSI, Microwave and Wireless Technologies Lecture Notes in Electrical Engineering, 2023 DOI:10.1007/978-981-19-0312-0_70

[3]	Numerical modeling and analysis of AZO/Cu2O transparent solar cell with a TiO2 buffer layer Engineering Research Express, 2023 DOI:10.1088/2631-8695/accacf

[4]	Maximizing the solar output power using hybrid (CdS/ZnSe) buffer for CIGS thin film solar cell Physica Scripta, 2023 DOI:10.1088/1402-4896/acff90

[5]	Comparison of Various Thin-Film-Based Absorber Materials: A Viable Approach for Next-Generation Solar Cells Coatings, 2022 DOI:10.3390/coatings12030405

[6]	Numerical Studies of Optimising Various Buffer Layers to Enhance the Performance of Tin Sulfide (SnS)-Based Solar Cells Transactions on Electrical and Electronic Materials, 2021 DOI:10.1007/s42341-021-00311-6