Materials Sciences and Applications

Materials Sciences and Applications

ISSN Print: 2153-117X
ISSN Online: 2153-1188
www.scirp.org/journal/msa
E-mail: msa@scirp.org
"Determination of Anodized Aluminum Material Characteristics by Means of Nano-Indentation Measurements"
written by Maria Datcheva, Sabina Cherneva, Maria Stoycheva, Roumen Iankov, Dimitar Stoychev,
published by Materials Sciences and Applications, Vol.2 No.10, 2011
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Structural and Mechanical Properties of Glass-Carbon Coatings after an Extended Stay on the International Space Station (ISS)
2021
[2] Corrosion inhibition characteristics of multilayer Si-DLC, phosphating and anodizing coatings deposited on 2024 Al alloy: A comparative study
2021
[3] Diffusion-alloying sintering of Cr–Mo pre-alloyed iron powders with carbon: The effect of the carbon introduction method on the sinter's properties
2021
[4] Development of a solar reflector coating on AA6061 alloy by plasma electrolytic oxidation
2019
[5] Modelling of mechanical behaviour of electronics materials
2019
[6] An adaptive geometry transformation and repair method for hybrid manufacturing
2019
[7] A data-driven personalized model of glucose dynamics taking account of the effects of physical activity for type 1 diabetes: An in silico study
2019
[8] Compressor Instability Analysis Within a Hybrid System Subject to Cycle Uncertainties
2019
[9] Research on the dynamics and variable characteristics of a double-swash-plate hydraulic axial piston pump with port valves
2019
[10] Sabina Cherneva
2019
[11] Investigation of Mechanical Properties of Mono-and Multi-layer Alumina and Ceria Films Using Finite Element Modeling and Nanoindentation Experiments
2019
[12] Mathematical modeling and numerical simulation of nanoindentation accounting for material heterogeneity
2018
[13] Study of the mechanical properties of single-layer and multi-layer metallic coatings with protective-decorative applications
NCTAM 2017 – 13th National Congress on Theoretical and Applied Mechanics, 2018
[14] The influence of diamond-like carbon and anodised aluminium oxide coatings on the surface properties of the SAE 305 aluminium alloy
Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2018
[15] Enhancement of Anodic layer for Aluminum AA6061T6 by using Titanium Dioxide-Rutile Nanoparticles
2018
[16] AlN-based Electro-Acoustic Sensors for Analytics in Liquids
2018
[17] Nano-indentation investigations of the mechanical properties of thin TiO2, WO3 and their composites layers, deposited by spray pyrolysis
2017
[18] New antenna design approach–3D polymer printing and metallization. experimental test at 14–18 GHz
AEU - International Journal of Electronics and Communications, 2017
[19] Composite model of the dependence of mechanical properties of anodic aluminum oxide on porosity
Inorganic Materials: Applied Research, 2017
[20] Communications (AEÜ)
2017
[21] NANO-INDENTATION INVESTIGATIONS OF THE MECHANICAL PROPERTIES OF THIN TiO2, WO3 AND THEIR COMPOSITES LAYERS, DEPOSITED BY …
2017
[22] Caracterização da resistência ao desgaste da liga de alumínio SAE 305 após processo de anodização
2017
[23] Композитная модель зависимости механических свойств анодного оксида алюминия от пористости
2017
[24] Microstructure and mechanical properties of stress-tailored piezoelectric AlN thin films for electro-acoustic devices
Applied Surface Science, 2017
[25] Piezoelectric AlN Films for FPW Sensors with Improved Device Performance
Procedia Engineering, 2016
[26] New antenna design approach-3D polymer printing and metallization. Experimental test at 14-18GHz
AEU - International Journal of Electronics and Communications, 2016
[27] Estimation of the elastic modulus of the alumina coated AA1050 aluminum: Modeling and Experiments
Materials Science and Engineering: A, 2016
[28] Effect of TiO 2 and ZrO 2 reinforcements on properties of Al 2 O 3 coatings fabricated by thermal flame spraying
Transactions of Nonferrous Metals Society of China, 2016
[29] Comparative study via nanoindentation of the mechanical properties of conversion corrosion protective layers on aluminum formed in Cr 6-containing and Cr 6- …
2016
[30] INVESTIGATION OF THE MECHANICAL PROPERTIES OF ELECTROCHEMICALLY DEPOSITED Au-In ALLOY FILMS USING NANO-INDENTATION
2016
[31] Effect of TiO2 and ZrO2 reinforcements on properties of Al2O3 coatings fabricated by thermal flame spraying
Transactions of Nonferrous Metals Society of China, 2016
[32] Material parameter identification of thin film with diamond nanoparticles via nanoindentation
2016
[33] Comparative study via nanoindentation of the mechanical properties of conversion corrosion protective layers on aluminum formed in Cr6+-containing and Cr6+ …
2016
[34] An Analysis of Burn Defect in Hard Anodized Process of AL 3003
2015
[35] Компьютерное моделирование колебаний микрокантилеверов из нанопористого оксида алюминия и исследование влияния пористости на модули упругости …
2015
[36] Laser-Ultrasonic Measurement of Elastic Properties of Anodized Aluminum Coatings
Physics Procedia, 2015
[37] Investigation of the influence of the concentrations of Sn in electrochemically deposited CuSn alloy films on their mechanical properties
APPLICATION OF MATHEMATICS IN TECHNICAL AND NATURAL SCIENCES: 7th International Conference for Promoting the Application of Mathematics in Technical and Natural Sciences-AMiTaNS’15, 2015
[38] Computer simulation of nanoporous alumina microcantilevers and the study of the influence of porosity on the elastic moduli of oxide
Nanotechnologies in Russia, 2015
[39] Nanoindentation investigation of mechanical properties of ZrO< sub> 2, ZrO< sub> 2–Y< sub> 2 O< sub> 3, Al< sub> 2 O< sub> 3 and TiO< sub> 2 thin films deposited on stainless steel OC 404 substrate by spray pyrolysis
Materials Science and Engineering: B, 2014
[40] Nanoindentation study of MAO coatings developed by dual electrolytes
Surface Engineering, 2014
[41] Nanomechanical Behavior of Ceramic Coatings Developed by Micro Arc Oxidation
Nanoindentation of Brittle Solids, 2014
[42] Corrosion and nanoindentation studies of MAO coatings
Surface Engineering, 2014
[43] Grayscale Marking of Anodized Aluminium Plate by Using Picosecond Laser and Galvanometer Scanner
JOURNAL OF LASER MICRO NANOENGINEERING, 2014
[44] Исследование сезонной неэквивалентности коррозионной агрессивности атмосферы с использованием микромеханических свойств стали Ст3
2014
[45] Nanoindentation investigation of mechanical properties of ZrO2, ZrO2–Y2O3, Al2O3 and TiO2 thin films deposited on stainless steel OC 404 substrate by spray …
Materials Science and Engineering: B, 2014
[46] ANALYSIS OF MICROMECHANICAL PROPERTIES OF REACTIVE EXTRUSION COMPOSITES BY NANOINDENTATION
International Multidisciplinary Scientific GeoConference: SGEM: Surveying Geology & mining Ecology Management, 2013
[47] Microstructural, corrosion and nanomechanical behaviour of ceramic coatings developed on magnesium AZ31 alloy by micro arc oxidation
Ceramics International , 2013
[48] Enhanced mechanical performance of AlN/nanodiamond micro-resonators
Journal of Micromechanics and Microengineering, 2013
Free SCIRP Newsletters
Copyright © 2006-2022 Scientific Research Publishing Inc. All Rights Reserved.
Top