Numerical Simulation of an Argon Stirred Ladle with Top and Bottom Injection

Journals Menu

Follow SCIRP

ISSN Print: 2165-3917
ISSN Online: 2165-3925
www.scirp.org/journal/ojapps
E-mail: ojapps@scirp.org

"Numerical Simulation of an Argon Stirred Ladle with Top and Bottom Injection"
written by Sofia Torres, Miguel A. Barron,
published by Open Journal of Applied Sciences, Vol.6 No.13, 2016

has been cited by the following article(s):

[1]	The State-of-the-Art in the Top Submerged Lance Gas Injection Technology: A Review
	… Materials Transactions B, 2022

[2]	Study of the Effect of a Plug with Torsion Channels on the Mixing Time in a Continuous Casting Ladle Water Model
	Diaz, A Aguilar-Corona… - Metals, 2021

[3]	InvestIgatIons of Dual Plug argon BlowIng for effIcIent MIxIng at laDle furnace statIon
	2021

[4]	X-ray Radioscopic Visualization of Bubbly Flows Injected Through a Top Submerged Lance into a Liquid Metal
	2020

[5]	Numerical and Physical Investigation of the Mixing Process in Gas Stirred Ladle System
	2020

[6]	Effect of off-centered silicon ladle on the removal strength of aluminum and calcium impurities
	Separation and Purification Technology, 2018

[1]	The State-of-the-Art in the Top Submerged Lance Gas Injection Technology: A Review Metallurgical and Materials Transactions B, 2022 DOI:10.1007/s11663-022-02631-1

[2]	Study of the Effect of a Plug with Torsion Channels on the Mixing Time in a Continuous Casting Ladle Water Model Metals, 2021 DOI:10.3390/met11121942

[3]	X-ray Radioscopic Visualization of Bubbly Flows Injected Through a Top Submerged Lance into a Liquid Metal Metallurgical and Materials Transactions B, 2019 DOI:10.1007/s11663-019-01720-y

[4]	Effect of off-centered silicon ladle on the removal strength of aluminum and calcium impurities Separation and Purification Technology, 2018 DOI:10.1016/j.seppur.2018.03.021

Follow SCIRP

Free SCIRP Newsletters

Add your e-mail address to receive free newsletters from SCIRP.

Top